Need upgrade question help
I recently had to reinstall my Mac os 10.4.8 over a crashed mac (archive & install) when I did that my live type, motion, compressor will not open
I have my original discs FCP 4.5, Fcp 5.0 ON DISC with downloaded updates 5.1 & 5.1.2
Do I need to go all the way back to 4.5 to get all the original programs reinstalled? or is 5.0 all the "actual programs"?
Thanks!
FCP 5.1.2 works fine but again not live type, motion, compressor any easier solution?
If I had to do an OS re-install, I'd just go ahead
and backup the boot drive, then reformat and do a
clean install of everything. But that's just me.
-DH
all my other programs photoshop, PPT etc works fine just the FCP stuff what is the reccommended way of reinstalling FCP, Live type, Motion, compressor etc can I START with 5.0 and just do my 5.1 & 5.12 upgrades?
Thanks!
Similar Messages
-
SQL*Plus Upgrade Questions [Help!!]
Hello,
Our project is using Oracle 8i Enterprise Edition Release 8.1.7.3.0 database and Oracle Dev Tools 6i Patch 3 (Form/Report Builder 6.0.8.12.1).
The SQL*Plus version that comes with this version is 8.0.6.0.0. We would like to upgrade to version 8.1.7.0.0. without having to upgrade the entire tool set [don't ask me why- politics ;)]. How can I do this? Is it even possible? I found some documentation that said all that was required for SQL Plus version 8.1.7.0.0 was Oracle 8i 8.1.7.0.0 database, which we have.
I grabbed Dev Tools 6i Patch 10 from MetaLink and installed in a seperate directory from one that our developers use as a test [for other unrelated issues]. Well, Patch 10 also comes with SQL Plus verison 8.0.6.0.0, even though it came out in early 2002, well after version 8.1.7.0.0 was released.
One of our test boxes has Oracle 9i iSuite installed, which does have SQL Plus 8.1.7.0.0. As a lark, I tried various was of simply moving its version (the .exe) and related .dlls to our existing test Dev 6i bin directory. No luck- all sorts of bizarre error messages. After I got through all the .dlls errors, I now get a
"The procedure entry point OCIUserCallbackRegister could not be located in the dll OCI.dll", even though the updated OCI.dll is in the bin.
I assume this all means that to upgrade from SQL Plus 8.0.6.0.0 to 8.1.7.0.0 it has to be installed [and not simply dropped]. Since the latest version of our tools [Dev 6i Patch 10] only has version 8.0.6.0.0, how can I install it?
HELP!!
Thanks in advance,
James WaltersHello,
Our project is using Oracle 8i Enterprise Edition Release 8.1.7.3.0 database and Oracle Dev Tools 6i Patch 3 (Form/Report Builder 6.0.8.12.1).
The SQL*Plus version that comes with this version is 8.0.6.0.0. We would like to upgrade to version 8.1.7.0.0. without having to upgrade the entire tool set [don't ask me why- politics ;)]. How can I do this? Is it even possible? I found some documentation that said all that was required for SQL Plus version 8.1.7.0.0 was Oracle 8i 8.1.7.0.0 database, which we have.
I grabbed Dev Tools 6i Patch 10 from MetaLink and installed in a seperate directory from one that our developers use as a test [for other unrelated issues]. Well, Patch 10 also comes with SQL Plus verison 8.0.6.0.0, even though it came out in early 2002, well after version 8.1.7.0.0 was released.
One of our test boxes has Oracle 9i iSuite installed, which does have SQL Plus 8.1.7.0.0. As a lark, I tried various was of simply moving its version (the .exe) and related .dlls to our existing test Dev 6i bin directory. No luck- all sorts of bizarre error messages. After I got through all the .dlls errors, I now get a
"The procedure entry point OCIUserCallbackRegister could not be located in the dll OCI.dll", even though the updated OCI.dll is in the bin.
I assume this all means that to upgrade from SQL Plus 8.0.6.0.0 to 8.1.7.0.0 it has to be installed [and not simply dropped]. Since the latest version of our tools [Dev 6i Patch 10] only has version 8.0.6.0.0, how can I install it?
HELP!!
Thanks in advance,
James Walters -
Upgrading questions - help anybody ?
howdy folks I am currently running Logic version 6.4 on a G5 Dual processor w/ 1.5 gigs of RAM. The system is stable & I use up to 24 tracks of audio plus 24 channels of virtual EXS24 instruments at once without problem. But I want to upgrade and run up to 48 channels of virtual instruments plus the memory-intensive Synthology Ivory Grand Piano software too. What system, memory and software upgrades are recommended to accomplish this ?
Hi,
I used to be using G5 Dual Processor as well...Most of the time,i am using JamPacks and EXS24 for Music Arrangement and Mixing without exporting them to Audio files total about 30 Tracks (included Audio tracks).
I found that my CPU usage was fully occupied.From the first,i doesn't realise that's CPU usage problem,so that i upgrade my RAM to 16GB (full ram)...haaa...what you guess? USELESS...problem still appear...most of the time system overload as well...
Early of 2008 i got my MacPro 2.8 (8 core) with 6GB Ram (11+22) and run with LP8...huh...NICE,Wonderful and Powerful!!!
Now.What i felt is,CPU usage is a very beginning and important upgrading from you.2ndly,might ask yourself,did you use any 3rd party sampler or plugin? if Yes,you s'ld try your usage of RAM from Start with 4GB.3rd,Hard Drive transfering speed.What's the speed of your Drive?are you using external h.drive for your project?My MacPro do provide 4 slots of H.Drive...so,using internal transfering are more safety and not really easy to CRASH drive (ya,i did a lot of bad experience with external drive,now all ext.drive are only be my backup drive,not project drive)
So,what you c'ld consider is:~
1)New MacPro for HighSpeed and CPU usage
2)More Ram if you are using a lot of 3rd party plugin or sampler
3)Project Drive (transfering/open/work in between internal drive which is upto 4 slot)
Hope that are really help!!!Please correct the mistake that i've made above (IF do :P) -
OXS server 3 with mavericks, it will not load up the assistant with open directory and will not allow me to use old opeopen directory and will not allow me to use old open directory it was not a clean install just upgrade. any help or advise appreciated as i really need the server.
I wonder if the disk being referred to is actually your iPod which is not plugged in. Maybe something has stuck thinking the iPod should be there.
Try completely removing all the iTunes related programs according to this method.
http://support.apple.com/kb/HT1923
Restart you PC and see if startup improves.
If it doesn't improve you need to consider the possibility that there is something else going on.
If The problem goes away, hopefully a fresh install will be OK. -
About Java 2 opaque font color question, help needed!
About Java 2 opaque font color question, help needed!
I was trying to test opaque font (the string has a foreground color and a background color), but i can't find the method for doing that.
i can change foreground by Graphics2D.setPaint(Color.black).
Anybody know how to change the background of the string?
Thanks!Hi. The way I'd do it would be to use the font metrics to find the length of a string and draw a rectangle and then drawstring over the rectangle. If you want an example, I can post it although I suspect theres a better way.
-
ITunes Plus Upgrade--No help from iTunes Support
I appologize for this lengthy post. Believe me I have more to the story, but want to keep it as short as possible. Bottom line is I'm looking for help with iTunes plus upgrade please.
My specific problem is getting customer support to upgrade my old iTunes songs iTunes to iTunes plus so I can use them on our new Sonos player. It’s now been almost a week since this issue arose and there has been no help in getting my problems solved. My main problem is that there is no telephone customer support for iTunes. All of the support for iTunes is now done online through emails. That is a huge issue in my mind, but not the purpose for this post.
Here is my problem..
I have two iTunes accounts. Account # 1 was my primary account until 2008/09 time frame when I switched from a PC to Macbook Pro. I have 314 songs from 2006-08 that were purchased on Account #1 that I'm trying to upgrade to iTunes Plus. Account #2 is now my primary iTunes account. The Account #2 songs are all iTunes plus and do not need upgrading. I now have all the purchases from both accounts on my Mac Mini serving as a HTC, but the old iTunes DRM songs cannot be played on Sonos until they get upgraded.
My issue solely relates to my old songs on Account #1. I have been trying to upgrade my account 1 songs since last Thursday. My iTunes store account is currently logged into Account 1 when attempting the updgrade. When I first made the purchase, I got the on screen message that I’d get an email with instructions to complete the purchase. Well three days passed and I never got the email. I also noticed that my purchase of $104 showed up as three “pending” credit card charges on my bank account records. This seemed odd so I called Apple for help. Big mistake!!!!!
When I attempted to call Apple Support I was continually given to “technical support” for either my Macbook or Mac Mini. They never listened to what I was saying. In fact one rep told me I would need to pay the $39 fee for technical support on my issue!!!! Finally, after speaking to three different individuals one of the “tech support” reps was able to contact an iTunes support rep. Note, that I could not speak to them, rather it was strictly apple employee to apple employee. I was placed on hold for thirty minutes while they worked on my issue. After thirty minutes I was told to go to the iTunes store and start over. I went to iTunes store and completed the purchase again. Shortly thereafter, I received an email response from iTunes saying:
Dear Tom,
Your iTunes Plus music upgrade could not be successfully completed because there was a problem with one of the items that was to be upgraded. Please return to your Upgrade My Library page and click Buy and your upgrade should be processed successfully. We are sorry for the inconvenience and appreciate your business.
Sincerely,
iTunes Store Team
Based on this email. I went to iTunes store again and tried the purchase….again. I then got the same email response a short time later. I have attempted two other times to buy the upgrades but got no email responses at all. Late Sunday, I called Apple again and also used their online iTunes support page. I got one response late Sunday evening asking a question about error messages, I answered their question by providing them the above iTunes notice. That email late Sunday night was the last communication I've recieved from iTunes support. It’s now three days later and I’m still waiting to hear back from someone at iTunes support. All I want to do is spend 104 dollars to upgrade my 300+ songs, but no one at Apple seems to care.
I am really disappointed in Apple’s customer service. I’ve been a fan of Apple for quite some time, between my wife and I, we have 6 Apple products in our home. The lack of customer support is really disgraceful.
Anyone have any ideas.This is a follow up. Finally, after almost 72 hours, I recieved another email from the original iTunes support representative. According to her, the problem is that one or more of my songs on the account are either not eligible for the upgrade or the file is corrupted and can not be upgraded. In short I cannot use the "Buy All" feature because I will always hit this roadblock. The only way to resolve this, is to upgrade each song individually or select a few songs at a time to upgrade.
I will have to do this until I get the song or songs that is causing the problem. Once I have identified the song(s), I can chose to repurchase them and get a refund. All songs today are at the DRM free format so repurchased songs will automatically be the upgraded file.
So I'll now begin the upgrade of the 314 songs. I guess it could be worse.
Okay, I got an answer and an offer of a refund, but this answer certainly could have been provided three days ago. Am I being unreasonable? -
Hard Drive Failure on HP DV 6000 Pavilion laptop Windows-XPsp3 OS - Need Data Recovery Help
Hard Drive Failure on HP DV 6000 Pavilion laptop - Need Data Recovery Help
HP Pavilion DV 6108 NR, RG365UA, purchased in late 2006 at Best Buy, with Windows XP, upgraded to Service Pack 3. It has a Fujitsu hard disk, 60 gigabyte, partitioned into C: and a Recovery D:.
Windows tries to boot up, but goes to blue screen with the message: "Unmountable Boot Volume" for one second, then just keeps recycling until I force a shutdown.
BIOS Phoenix, hard drive test result: " #1-08 Fail "
I ran a disk analysis/recovery program on the Cdrive and it seemed to show the directory structure intact, and it was able to recover some files. I was using the free one from Seagate (which only recovers small files). The second pass didn't run so well, and during the third run the program said I should not proceed further, and I should contact a professional disk recovery company.
However, the D drive seems to be intact, so, I wonder if the disk is corrupted or just some aspect of the logical C drive is bad.
How can I get the D: to run the recovery software on it? The recovery disks, made by Best Buy, only proceed to the R / F / Q option screen, and when I press R, I get a blue screen every time.
Tapping the F10 key during startup gets me nowhere. Ditto the F11 key.
I dont care about the hard disk; it is the data (files, docs, images, etc) that I want.
I contacted HP to order recovery disks but they are no longer available for my computer.
Any suggestions would be greatly appreciated!
Jon
This question was solved.
View Solution.Update...
I found a website that offers the following:
http://www.computersurgeons.com/p-13442-recovery-kit-435422-001-for-hp-model-number-dv6108nr.aspx
Recovery Kit 435422-001 For HP Model Number dv6108nr
Price: $27.00
Recovery Kit Set (An Entire Image of the Computer hard drive when the computer was new)
But I wonder how useful it would be. Early XP , no doubt. And if my hard disk problem is a mechanical fault, would any recovery disk even work? The disks made by Best Buy when I bought mine new in 2006 don't do anything more than go to the R /F/ Q screen and then goes to a blue screen when I press R (to recover the OS and apps and data files). And, as I wrote, it is the data that I want, not the disk drive. -
I need Upgrade WiSM to 7.0.235.3
I have a 6509-E with Sup WS-SUP720-3B IOS (s72033-ipservicesk9_wan-mz.122-18.SXF7)
And i need upgrade my Wism to software version 7.0.235.3, and i have a question:
I have to update the ios Supervisor? or can i upgrade to 7.0.235.3 with Supervisor IOS version 12.2(18).SXF7?
ThanksHi Juan,
No I did not find any specific documents about there compatibility.
The firmware of the IOS does not decide your 6500 Supervisor. If you want to use WiSM-1, regardless of the firmware you have inside, then your supervisor card should be a Sup720 running IOS version SXF2.
So dont worry about this and go ahead with wism software upgrade.
wism last support is 7.0.x .
Regards
Dont forget to rate helpful posts -
I just upgrade the OS X from 10.9.1 to 10.9.2. After upgrade, the help file is not available. How can I get it back?
Look above at my original post:
Downgrade Mavericks to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer
loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the
Utilities menu.
2. After DU loads select your hard drive (this is the entry with the
mfgr.'s ID and size) from the left side list. Note the SMART status
of the drive in DU's status area. If it does not say "Verified" then
the drive is failing or has failed and will need replacing. SMART
info will not be reported on external drives. Otherwise, click on
the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions
from the drop down menu to one. Set the format type to Mac OS
Extended (Journaled.) Click on the Options button, set the
partition scheme to GUID then click on the OK button. Click on
the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner.
If you have Snow Leopard Time Machine backups made while on Snow Leopard, then you may do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion/Mountain Lion files. -
I really need someone to help me. I have been trying to figure out how to select a PDF document to convert to a Word doc. When I go to select a PDF file, all that shows up is the WORD docs. does not show ANY of my PDF files... Please help me figure out what is going on? We have it set on auto renewal so I know its not that we haven't renewed this subscription, because we pay automatically.
Hi olivias,
It sounds like there may be some confusion on your system about what application should be associated with PDF files. You can reset filename associations by following the steps in these articles (depending on your operating system):
How to change the default application for a file type | Macworld
http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7
Please let us know if you have additional questions.
Best,
Sara -
Need some quick help - fairly urgent!
I've just taken over a new job and have been the task of finishing the new brochure for Christmas, there's not a lot to do but a lot of the measurements need changing
This is the layout I'm dealing with..
All the boxes have been made in Illustrator
The text has been done in In'Design and it seems every piece of text is it's own box if that makes sense
My question is, if I select the whole specification box - copy, paste it into Adobe Illustrator and change the text there, then paste the edited box back into In-Design, will I lose quality when it gets printed?
I'm worried if I do it this way it may come out blurred? Or am I just worrying about nothing?I couldn't find an Illy file in the end and have ended up creating tables in ID to replicate what was already there!
Didn't take very long and I guess if I didn't do it now, I'd come across the same situation next time!
Date: Wed, 30 Nov 2011 08:48:07 -0700
From: [email protected]
To: [email protected]
Subject: Need some quick help - fairly urgent!
Re: Need some quick help - fairly urgent!
created by Peter Spier in InDesign - View the full discussion
There certainly are viable "quick fix" solutions proposed here, and if the dealine is looming and this file never needs to be touched again I might be tempted, but they are only postponing the pain for a file that needs periodic updates, and I wouldn't waste effort on them, myself, when that time can be put toward a proper rebuild now if that's the ultimate goal.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4054725#4054725
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4054725#4054725. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in InDesign by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
In need of immediate help with FCP new user taking over colleagues position
Good Morning. I am in urgent need of some help with a specific final cut pro question. My coworker and I have been working on a video project for our employer, a university. He ran the editor (FCP) and I ran the logistics of setting things up, keeping the contacts and scheduling, etc.
He has left until late August and there are two major typos in his work which is posted to the web at the moment. I need to correct these typos and have less than a faint idea of how to do it.
First of all, what is the file's last three letters? (.doc, .mov, etc...)
Second, can I edit this as easily as I think I can? Just click in the text file along the bottom timeline and edit that way?
How do I export the movie as an mp4 file after i have edited it.
Anything else that would be deemed helpful is always appreciated!
I really appreciate the help. I was never trained on this program because I never needed to be. Unfortunately, as it turns out, I did.
Thanks for the help!You need to locate the Project file. Which will be somewhere in your colleague's User space.
In the Finder, press command and F to activate the Find function.
Make sure the following parameters are set:
Search *This Mac* and Contents
Kind is Documents
Type the project name.
The icon looks like this:
Double click it to launch Final Cut Pro with the project.
To locate the text overlay, click on the Timeline to make it active. Use the down arrow on your keyboard to jump from one cut to the next. The text overlay will look similar to this:
Double click on the Text clip. This will place it in the Viewer (the left "monitor").
Click the "Controls" tab above the Viewer and make your changes. Press Return.
Clicking anywhere in the Timeline once more will update it.
Make sure that no clips are selected and the Timeline is the active window.
Go to the menu bar: File > Export > Using QuickTime Conversion.
In the window that opens, make sure that Format is set to QuickTime Movie.
Click the Options button. Look at the top of the next window.
Does it say Compression Setting: H264? If it does, great.
If not, click the settings button and choose H264 from the *Compression Type* button.
At bottom left, drag the Quality slider to Best. Click OK.
This brings you back to the previous window.
Click on Size if you need to change something -there are a number of presets, but you can choose a custom size if you wish. Click OK.
That window is dismissed and returns you to the Save dialog.
Type a name and choose a destination for your file.
Message was edited by: Nick Holmes -
Tried to use Iphoto and was told I needed upgrade. Try to install upgrade . Upgrade should take an hour if photo library is large. It's now close to three hours and still upgrading. Can't use Iphoto and don't want to stop if still upgrading...3hours??
You are on Windows 2000, you do not have a "Firefox" button, and should consider yourself to be fortunate in that you still have menus and don't have to do anything to get the menus back instead of the "Firefox" button. (The same applies to Windows XP users).
Use the "File" menu to get to Import. You are not on Windows 7 or Vista, and don't have to put up with the nonsense added for Aero.
If you want the "Firefox" button you can get it with View -> toolbars -> (uncheck) Menu Bar. The menu bar and the "Firefox" button were supposed to be mutually exclusive (which is impossible in some cases without being incompatible).
Once you are using the "Firefox" button ...
Use the "Alt" key to view the menu bar (temporarily) containing File, Edit, View, History, Bookmarks, Tools, and Help. On Windows 7 and Vista, the menu bar was hidden by default in Firefox 4 and above. These menu items are more or less available under the "Firefox" button which has the most used of the built-in Firefox menu items available in a different format.
To get back to having menus again. "Firefox" button -> Options (second column) -> (check) Menu Bar
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface -
Hi All,
I need a quick help on Pro*C. Here's the details on the same:
- My program takes one input file as parameter. Lets assume argv[2] is the name of the inputfile, which is my input parameter as well.
- ps_filename = argv[2]; I'm copying argv[2] i.e. filename in a variable called ps_filename
- Now this inputfile can be of two types, say type A_yyyymmddhhmmss.dat and B_yyyymmddhhmmss.dat.
- Therefore for every run I'll have one of this value as input parameter which will be copied into the ps_filename.
- Now I need to call two different functions based on the inputfile i.e. if ps_filename like 'A%' then call func A() else call func B();
But in ProC/C there is no provision to use like operator.
Therefore my question is how can I have ps_filename like 'A%' in C?
Can anyone please help me to solve this issue?
Hope to get your co-operation.
Thanks & Regards,
Debabratadebabratas wrote:
Therefore my question is how can I have ps_filename like 'A%' in C?Hello, why don't you just substring on the first character, and if that's an 'A', then LIKE 'A%' will also hold.
For example, in Pro*C:
if (substr(ps_filename,1,1) == 'A') {
.. -
Need upgrade Macbook pro OS X 10.5.8
I got a MacBook Pro (15-inch Early 2008)
HD-185.99GB
152 GB FREE
run OS X 10.5.8
Hardware Overview:
Model Name: MacBook Pro
Model Identifier: MacBookPro4,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MBP41.00C1.B00
SMC Version (system): 1.27f3
Serial Number (system): W88110KXYJX
Hardware UUID: 6CAA2D99-7A26-59B1-8038-EC15BE7CA804
Sudden Motion Sensor:
State: Enabled
I NEED UPGRADE AND I already know that I should start buying snow leopard from apple , but after that how far can I go with these specifications??? I mean can I run maverick?
Thanks.juliomaxter wrote:
I mean can I run maverick?
Yes.
You also can install up to 6 GB RAM which would be helpful running Mavericks. The RAM specifications for you MBP are 200-pin PC2-5300 (667MHz) DDR2 SO-DIMM. The most reliable sources of Mac compatible RAM are OWC and Crucial.
As you know, Snow Leopard 10.6.8 is required for ant OSX upgrade.
Ciao.
Maybe you are looking for
-
How to run Assignment in Series - Workflow can not connect two Assignments
Here is my scenario: I have a custom repository with no Taxanomy table. I want to run series of Assignments. I defined 5 assignments. Thought that I can use MDM Workflow to call them in series. However MDM Workflow does not let me connect one Assignm
-
Hi, I have got this Generator&Acquisition vi that saves digital data from a pickup signal and adds 10kHz to the driving signal when I press the "Save and add 10kHz" button. I would like to automate this so that I don't have to press this button for e
-
I am enrolled in an online university program that uses Sakai. Fire Fox updated something that attaches computer script to my Word documents when I upload them. I use a PC and Word 2010
-
Template(best practice) for Switch ports
Hi, Looking for best practice advice on switchport config for client facing ports. We recently had an incident where an access port turned into a trunk(trunk mode desirable), which we obviously do not want to happen again! For Access Ports(First two
-
New failure of one software program to initialize
I am having a technical problem with my Palm Centro and hope you can help me. I purchased Merriam-Webster unabridged dictionary for my Palm Centro from Paragon Technologie and successfully loaded it and used it daily for ~5 weeks until one week ago