Need urgent decission for DV6-3112sa memory upgrade

I need a ram upgrade and i was wondering is that going to support DDR3 1333 mhz 4GBx2=8GB memories
the ram I am looking at is
http://www.amazon.co.uk/Corsair-CMSO4GX3M1A1333C9-DDR3-Laptop-Memory/dp/B002YU83YO/ref=sr_1_1?s=comp...
i will proceed to buy after reciving the reply
thanks for the help

Hi:
Below is the link to the service manual for your notebook;
It appears you are correct...DDR3 PC3-1333, up to 8 GB
The memory will only run at 1066 MHz in your particular notebook though.
http://h10032.www1.hp.com/ctg/Manual/c02657339.pdf
The memory has good reviews on the place I always buy my memory from.
http://www.newegg.com/Product/Product.aspx?Item=N82E16820145283
It should work for you.
Paul

Similar Messages

Need urgently help for OBIEE Installation (11g)

Hi all,
I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
The log under the Inventory directory shows me only following:
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
I need urgently help. I would appreciate someone could help me.
We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
I hope to find the help I need. I am desperated :-(

Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
Thanks,
JD

Needed urgent help for user creation in security manager in ODI 11g

Hi Gurus,
I have an urgent requirement in ODI security manager and i am completely helpless. We need specific steps for the user creation with sufficient priviledges. The detailed requirements are:
1. There is a group of users under the framework team and these users should be able to edit the Knowledge modules only. All other objects (e.g. projects, interface, procedures or development related objects) should only be in read only mode for them.
2. There is a group of users under the development team. The priviledges of these users should be mutually exclusive to that of the framework team users. i.e. the development team should be able to edit or delete all development related objects (e.g. projects, interface, proc etc.) but the knowledge modules should only be in read only mode for them.
Now I will explain what i have tried out:
I am working on ODI 11.1.1.5.
I have created a user with NG DESIGNER and CONNECT profile. Dragged and dropped all the projects on the user and selected all methods in all repositories (check sign). However when i connect with that user i cannot open the KMs (as far as development team is concerned its fine) but i can also not open interfaces as well as procedures (which is not acceptable from development point of view).
Also when i tried creating a user from the framework team point of view i could not see any option related to KMs (To give edit priviledge).
Please help me out guys. I have also searched oracle documentation and believe me the security manager section is not very good. If you guys can help me out with specific steps it would be great (I have tried the hints given in oracle documentation and they dont work, the ODI security manager behaves strangely :-(
Thanks in advance,
SB

Similar requirement here guys. Any pointers. I was able to achieve this by restricting development user from supervisor access. In that case the development user can not edit the interfaces. Any known defefct?

Need urgent Help for Kernel upgrade......

Hi Gurus,
I have recently upgraded SAP kernel from Release 6.40 Patch 109 to Release 6.40 Patch 175. My System is SAP ERP Central Component 5.0 and Release is 6.40 and Kernel Stataus is showing below details:
Kernel release    640
Compilation       SunOS 5.8 G
Patch Level       175
ABAP Load         1521
CUA load          16
Mode              opt
~
I have total 8 Application servers. today I have genereated EWA report and in that report, for SAP kernel section it has reported that <b>"You are running different SAP kernel releases on your instances. This situation may lead to severe problems and is not supported by SAP.
Recommendation: Use only one kernel release for all instances."</b>
Actaully I have updated kernel in my central instance (/sapmnt/<SID>/exe) and this directory is NFS mount in all the application server. So I am not sure why the SAP EWA is repoting this that you are running difference SAP Kerenl release.
If this is correct then how to rectify it ? what action I need to take to resolve this ?
Appreciate your help.
Thanks & Regards
Basis

I will plan to do that as early as possible. Even I
am going to write to SAP to release that note in
english for better understanding.
yes - that note should be translated giving the importance.
My question is: Am I on HIGH ALERT for this issue ?
Since it is production server, will it going to
affect my system in any aspect ??
No, you will just see a slightly higher usage of "nfsd" when you start the application servers for the first time since they will all copy parts of the kernel locally.
2nd thing, This is applicable only to NW ? Because I
have upgraded SAP Kernel to Patch 175 to other R/3
system having more application server, but I didn't
get this comment in my EWA report ?
The comment isn´t related to to usage of sapcpe. The comment means, that you have at least one application server, that uses local binaries with a different patchlevel instead of those on the central instance. I would consider that more critical. Maybe you installed one of the servers later and used a newer installation CD set which creates that new structure for using sapcpe by default... don´t know, just a guess. To check, go to SM51 and select each server and press on "Release Information", you will see which one is affected.
This week I am planning to upgrade kernel for 4.6D
release to Patch 2307. Will this be gona issue for
that also ?
Kernels lower than 6.10 use a different approach (the "ctrun directory" mentioned in that note) - technically it´s the same. The installation guides for 4.6c should tell you how to set that up.
Markus

Need Urgent Solution for error in presence webservice

Hi Folks, I am new to ocsg , i got stuck with a serious problem
I am working with presence web service
As from documentation , i understood that watcher should subscribe with attrbiutes which he wants to look up for presence user's information , so i tried to give subscribe information, in that tab, i gave sip uri as tel:1234
and click on start button .Initially i got error that No plug in created
Then i tried to create the plug in from pluginmanager for presence webservice , but it is not allowing to create saying that "you cannot create plug for this service ( presence web service)"
then I started using the already existing
presenceservice = Plugin_px21_presence_sip and existing
================
presence instance = Plugin_px21_presence_sip#wlng_nt_presence_px21#4.1
then again i got error while I click on start button , saying that No Route Exists
then I added a route by taking Plugin_px21_presence_sip as input value and values given as tel:^.*
and I also set setrouteconfig as below values
================
Plugin_px21_presence_sip
================
<?xml version="1.0" encoding="UTF-8"?>
<route xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="route.xsd">
<destAddress defaultResult="true">tel:^.*</destAddress>
</route>
=================
it has accepted . then I again started the subscribe presence by clicking on start button .
14 Jul 2009 11:29:45,421 [ WARN com.bea.wlcp.wlng.util.EJBHelper - Failed to process request
com.bea.wlcp.wlng.api.plugin.NoRoutePluginException: Could not find a route for this message. address: tel:1234
at com.bea.wlcp.wlng.interceptor.RemoveInvalidRoute.invoke(RemoveInvalidRoute.java:49)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.CreatePolicyData.invoke(CreatePolicyData.java:25)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.RemoveInactivePlugin.invoke(RemoveInactivePlugin.java:39)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.CreatePluginList.invoke(CreatePluginList.java:59)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.ValidateRequestUsingRequestFactory.invoke(ValidateRequestUsingRequestFactory.java:41)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.EnforceSpAppBudget.invoke(EnforceSpAppBudget.java:70)
at com.bea.wlcp.wlng.interceptor.ContextImpl.invokeNext(ContextImpl.java:87)
at com.bea.wlcp.wlng.interceptor.EnforceApplicationState.invoke(EnforceApplicationState.java:71)
at com.bea.wlcp.wlng.plugin.PluginManagerImpl.invokeInterceptors(PluginManagerImpl.java:84)
at com.bea.wlcp.wlng.plugin.PluginManagerImpl.processRequest(PluginManagerImpl.java:58)
at com.bea.wlcp.wlng.util.EJBHelper.processRequest(EJBHelper.java:42)
at com.bea.wlcp.wlng.px21.ejb.PresenceConsumerEjbImpl.subscribePresence(PresenceConsumerEjbImpl.java:79)
at com.bea.wlcp.wlng.px21.ejb.PresenceConsumer_y33p2d_EOImpl.subscribePresence(PresenceConsumer_y33p2d_EOImpl.java:138)
at com.bea.wlcp.wlng.px21.ejb.PresenceConsumer_y33p2d_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at com.bea.wlcp.wlng.px21.ejb.PresenceConsumer_y33p2d_EOImpl_1030_WLStub.subscribePresence(Unknown Source)
at com.bea.wlcp.wlng.px21.jws.PresenceConsumerWsImpl.subscribePresence(Unknown Source)
at sun.reflect.GeneratedMethodAccessor376.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.wsee.component.pojo.JavaClassComponent.invoke(JavaClassComponent.java:112)
at weblogic.wsee.ws.dispatch.server.ComponentHandler.handleRequest(ComponentHandler.java:84)
at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:141)
at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:114)
at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
at weblogic.wsee.server.servlet.BaseWSServlet$AuthorizedInvoke.run(BaseWSServlet.java:285)
at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:169)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3501)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2089)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
please guide me if my understanding is correct and my steps are correct or not, if all the above steps are fine, please tell why i am getting that error message
Really stuck with this problem from 1 week , please help me to move further.
Regards
Rajasekhar

Hi, if this is urgent I would suggest logging the issue on My Oracle Support in the Communications Service Delivery Community where Oracle and customer/partner/developer experts will advise whether this is a configuration issue or a bug that requires an SR to deliver a fix.
Regards
Graham

I need urgent help for the logic

hi all,
Initially, the requirement was to create PO regardless the Purchase Requisition based on the formula
If (Open Qty + Current Stock) < Safety Stock ==>> THEN A PO NEEDS TO BE CREATED
This is absolutely fine, this created the PO as per the above condition.
OUR REQUIREMENT
Modify the same program to create PO's only if there is any PR for that material . Meaning, turn all the PR's into PO. Also, when creating PO, the delivery date should be = (Current date - 7 days) when creating a PO for an PR(I think the table name is VETVG.) Nothing else. We need to change the IF condition in the following code .
so can any one let me that what modification i need to do ie what logic i should use to get the requirement fullfilled.
*Report Z_STO_SAFETY_STOCK                                            *
Program Name : Z_STO_SAFETY_STOCK                                    *
Date         : 09.03.2007                                            *
Programmer   : Rajdeep Kumar
Last Change : Van Tran                22/03/2007                    *
Specification:                                                       *
Program Type : Report                                                *
Description : Create STO requirement for Plant
Transaction : None                                                  *
Input Files : None                                                  *
Output Files : None                                                  *
Scheduling Issues :                                                  *
Run Frequency :                                                      *
Mod#    Date          By            Description                      *
New   09.03.2007   Rajdeep Kumar     Created                         *
                   DEVK905890                                        *
M01   20.03.2007   Rajdeep Kumar     Material Group Added to         *
                   DEVK905892        Selection Screen                *
*Update 05.04.2007   DEVK906082        Added two new selection         *
                                     fields beskz and sobsl          *
                                     and is select statement         *
REPORT z_sto_safety_stock NO STANDARD PAGE HEADING.
*&                       TABLES
TABLES:
        t001w,
      marc.                                               " M01
        marc,                                               " M01
        mara.                                               " M01
*&                     DATA DECLARATION
DATA: BEGIN OF it_marc OCCURS 0,
        matnr LIKE marc-matnr,
        werks LIKE marc-werks,
        eisbe LIKE marc-eisbe,
      bstmi LIKE marc-bstmi,
        bstrf LIKE marc-bstrf,
        beskz LIKE marc-beskz,
        sobsl LIKE marc-sobsl,
      END OF it_marc.
DATA: BEGIN OF it_mard OCCURS 0,
        matnr LIKE mard-matnr,
        werks LIKE mard-werks,
        labst LIKE mard-labst,
      END OF it_mard.
DATA: BEGIN OF it_po OCCURS 0,
        ebeln LIKE ekko-ebeln,
        werks LIKE ekpo-werks,
        ebelp LIKE ekpo-ebelp,
        loekz LIKE ekpo-loekz,
        etenr LIKE eket-etenr,
        matnr LIKE ekpo-matnr,
        menge LIKE eket-menge,
        wemng LIKE eket-wemng,
      END OF it_po.
DATA: BEGIN OF it_po_2 OCCURS 0,
        matnr LIKE ekpo-matnr,
        werks LIKE ekpo-werks,
        ebeln LIKE ekko-ebeln,
        ebelp LIKE ekpo-ebelp,
        loekz LIKE ekpo-loekz,
        etenr LIKE eket-etenr,
        menge LIKE eket-menge,
        wemng LIKE eket-wemng,
      END OF it_po_2.
DATA: BEGIN OF it_po_pend OCCURS 0,
        matnr LIKE ekpo-matnr,
        werks LIKE ekpo-werks,
        pendi LIKE eket-menge,
      END OF it_po_pend.
DATA: BEGIN OF wa_join OCCURS 0,
        ebeln LIKE ekko-ebeln,
        werks LIKE ekpo-werks,
        ebelp LIKE ekpo-ebelp,
        loekz LIKE ekpo-loekz,
        etenr LIKE eket-etenr,
        matnr LIKE ekpo-matnr,
        menge LIKE eket-menge,
        wemng LIKE eket-wemng,
      END OF wa_join.
DATA : BEGIN OF itab_marc_mard OCCURS 0,
         werks LIKE marc-werks,
         matnr LIKE marc-matnr,
         eisbe LIKE marc-eisbe,
       bstmi LIKE marc-bstmi,
         bstrf LIKE marc-bstrf,
         beskz LIKE marc-beskz,
         sobsl LIKE marc-sobsl,
         labst LIKE mard-labst,
         menge LIKE ekpo-menge,
         ordqty LIKE ekpo-menge,
       END OF itab_marc_mard.
DATA: BEGIN OF it_sto OCCURS 0,
      werks LIKE mard-werks,
      matnr LIKE mard-matnr,
      orqty LIKE ekpo-menge,
      eisbe LIKE marc-eisbe,
    bstmi LIKE marc-bstmi,
      bstrf LIKE marc-bstrf,
      beskz LIKE marc-beskz,
      sobsl LIKE marc-sobsl,
      labst LIKE mard-labst,
      pendi LIKE eket-menge,
      END OF it_sto.
DATA: ws_poheader            LIKE   bapimepoheader.
DATA: ws_poheaderx           LIKE   bapimepoheaderx .
DATA: ws_ebeln               TYPE   mepoheader-ebeln.
DATA: ws_posnr               LIKE   ekpo-ebelp.
DATA: ws_etenr               LIKE   eket-etenr VALUE '0001'.
DATA: ws_purchaseorder       LIKE   ekko-ebeln.
DATA: ws_flg1                TYPE   c. " VALUE 'X'.
DATA: ws_flg2                TYPE   c.
DATA: ws_flg3                TYPE   c.
*-- For Handling Error Messages in BAPI
DATA: tbl_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
*-- For Item Details
DATA: tbl_poitem LIKE bapimepoitem OCCURS 0 WITH HEADER LINE.
DATA: tbl_poitemx LIKE bapimepoitemx OCCURS 0 WITH HEADER LINE.
DATA: tbl_posched LIKE bapimeposchedule OCCURS 0 WITH HEADER LINE.
DATA: tbl_poschedx LIKE bapimeposchedulx OCCURS 0 WITH HEADER LINE.
*&                       CONSTANTS
CONSTANTS:   ws_flg            TYPE   c   VALUE 'X'.
CONSTANTS:   c_unistruct(2)    TYPE   c   VALUE 'Z3'. "For UNISTRUCT STO
*&                      SELECTION-SCREEN
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_werks FOR t001w-werks,
              s_matnr FOR marc-matnr.                     " M01
                s_matnr FOR marc-matnr,                     " M01
                s_matkl FOR mara-matkl,                     " M01
                s_beskz FOR marc-beskz,
                s_sobsl FOR marc-sobsl.
PARAMETERS:     p_test TYPE check.
SELECTION-SCREEN : END OF BLOCK b1.
*&                      START OF SELECTION EVENT
START-OF-SELECTION.
Get the Safety Stock & Minimum Lot Size for the materials
PERFORM get_plant_data.
Get the Quantities in stock
PERFORM get_stock_data.
Determine the open quantities for the materials concerned
[EKKO, EKET, EKPO]
PERFORM get_open_quantities.
PERFORM open_quantities.
Determine overall the quantities required for each material
PERFORM determine_mat_qty_required.
Print the details
PERFORM print_details.
IF p_test EQ space.
PO is created for each plant.
Create the PO required.
    PERFORM create_po.
Create the PO's for each plant with the materials required
   PERFORM create_header_item.
Bapi call to create a Purchase order
   PERFORM create_purhase_order.
ENDIF.
END-OF-SELECTION.
TOP-OF-PAGE.
PERFORM print_header.
*&      Form get_plant_data
      To get the Safety Stock
--> p1        text
<-- p2        text
FORM get_plant_data .
start                                                     " M01
SELECT      matnr werks eisbe bstmi
INTO TABLE it_marc
FROM        marc
WHERE       matnr IN s_matnr AND
            werks IN s_werks AND
            eisbe GT 0.
end                                                       " M01
start                                                     " M01
SELECT      marc~matnr werks eisbe bstrf beskz sobsl
                                                          " bstmi
INTO TABLE it_marc
FROM        marc AS marc
INNER JOIN mara AS mara
ON          maramatnr EQ marcmatnr
WHERE       marc~matnr IN s_matnr AND
              werks      IN s_werks AND
              matkl      IN s_matkl AND
              beskz      IN s_beskz AND
              sobsl      IN s_sobsl AND
              eisbe      GT 0.
end                                                       " M01
ENDFORM.                    " get_plant_data
*&      Form get_stock_data
     To get the Current Stock
--> p1        text
<-- p2        text
FORM get_stock_data .
DATA: BEGIN OF lt_mard OCCURS 0,
          matnr LIKE mard-matnr,
          werks LIKE mard-werks,
          lgort LIKE mard-lgort,
          labst LIKE mard-labst,
        END OF lt_mard.
CHECK NOT it_marc[] IS INITIAL.
SELECT      matnr werks lgort labst
INTO TABLE lt_mard
FROM        mard
FOR         ALL ENTRIES IN it_marc
WHERE       matnr EQ it_marc-matnr AND
              werks EQ it_marc-werks.
SORT lt_mard BY matnr werks.
LOOP AT lt_mard.
    AT NEW werks.
      it_mard-matnr = lt_mard-matnr.
      it_mard-werks = lt_mard-werks.
    ENDAT.
    it_mard-labst = it_mard-labst + lt_mard-labst.
    AT END OF werks.
      APPEND it_mard.
      CLEAR it_mard.
    ENDAT.
ENDLOOP.
ENDFORM.                    " get_stock_data
*&      Form open_quantities
      text
--> p1        text
<-- p2        text
FORM open_quantities .
Storing MARC and MARD data in an internal table to find the open
quantities
LOOP AT it_marc.
    itab_marc_mard-matnr = it_marc-matnr.
    itab_marc_mard-werks = it_marc-werks.
    itab_marc_mard-eisbe = it_marc-eisbe.
itab_marc_mard-bstmi = it_marc-bstmi.
    itab_marc_mard-bstrf = it_marc-bstrf.
    itab_marc_mard-beskz = it_marc-beskz.
    itab_marc_mard-sobsl = it_marc-sobsl.
    READ TABLE it_mard WITH KEY matnr = it_marc-matnr.
    IF sy-subrc EQ 0.
      itab_marc_mard-labst = it_mard-labst.
    ENDIF.
    APPEND itab_marc_mard.
    CLEAR itab_marc_mard.
ENDLOOP.
CHECK NOT itab_marc_mard[] IS INITIAL.
Join EKKO EKPO
SELECT a~ebeln
         b~ebelp
         b~werks
         b~matnr
         b~menge
         c~etenr
         c~wamng
         INTO CORRESPONDING FIELDS OF TABLE it_po
FROM ekpo AS b
INNER JOIN ekko AS a
ON aebeln = bebeln
INNER JOIN eket AS c
ON bebeln = cebeln AND bebelp = cebelp
FOR ALL ENTRIES IN itab_marc_mard
WHERE b~matnr = itab_marc_mard-matnr AND
        b~werks IN s_werks .
DATA : t_menge TYPE ekpo-menge . "local variable
*Store the contents of it_po to the work area to get the minimum order
*quantity
wa_join[] = it_po[].
LOOP AT it_po.
delete the entries where MENGE = WAMNG
    DELETE it_po WHERE menge = it_po-wemng.
    LOOP AT wa_join WHERE matnr = it_po-matnr
                           AND werks = it_po-werks.
      t_menge = t_menge + wa_join-menge.
    ENDLOOP.
    it_po-menge = t_menge.
    MODIFY TABLE it_po TRANSPORTING menge.
    CLEAR :t_menge.
ENDLOOP.
Once you get the quantities delete the repeating materials for the
plant.
DELETE ADJACENT DUPLICATES FROM it_po COMPARING werks matnr.
SORT it_po BY matnr.
LOOP AT itab_marc_mard.
    READ TABLE it_po WITH KEY matnr = itab_marc_mard-matnr
        APPEND it_sto.
    ELSE.
      WRITE:/ 'There are no open quantities to create Purchase order'.
    ENDIF.
    CLEAR it_sto.
ENDLOOP.                         werks = itab_marc_mard-werks BINARY
SEARCH.
    itab_marc_mard-ordqty = itab_marc_mard-labst + it_po-menge .
     If Open quantiy + Current Stock < Safety Stock
    IF itab_marc_mard-ordqty LE itab_marc_mard-eisbe.
     Minimum order qty = Safety Stock - (Open qty + current stock)
      itab_marc_mard-ordqty = itab_marc_mard-eisbe - ( it_po-menge +
itab_marc_mard-labst ) .
       Move all the contents to the internal table it_sto ie Plant,
Material and the Min Order Qty
       so that we can create PO based on this internal table
      it_sto-matnr = itab_marc_mard-matnr.
      it_sto-werks = itab_marc_mard-werks.
      it_sto-orqty = itab_marc_mard-ordqty.
ENDFORM.                    " open_quantities
*&      Form CREATE_HEADER_ITEM
      text
FORM create_header_item.
LOOP AT it_sto.
*--- Document date with flag
    ws_poheader-doc_date             = sy-datum.
    ws_poheaderx-doc_date            = ws_flg.
*--- Document type with flag
    ws_poheader-doc_type             = 'Z3'(c01).
    ws_poheaderx-doc_type            = ws_flg.
*--- Purchasing group with Flag
    ws_poheader-pur_group            = '005'.   " hardcoded
    ws_poheaderx-pur_group           = ws_flg.
*--- Purchasing Organization with flag
    ws_poheader-purch_org            = '2000'.
    ws_poheaderx-purch_org           = ws_flg.
*--- Supply plant with flag
    ws_poheader-suppl_plnt           = '2000'.
    ws_poheaderx-suppl_plnt          = ws_flg.
*--- Company Code with flag
    ws_poheader-comp_code            = '2000'.
    ws_poheaderx-comp_code           = ws_flg.
*<--- assinging new item No.
    ws_posnr = ws_posnr + 10.
*POPULATE ITEM DATA.
    tbl_poitem-po_item                 = ws_posnr.
    tbl_poitem-material                = it_sto-matnr.
    tbl_poitem-item_cat                = 'U'(c02).
    tbl_poitem-plant                   = it_sto-werks.
    tbl_poitem-quantity                = it_sto-orqty.
    APPEND tbl_poitem.
    CLEAR tbl_poitem.
*POPULATE ITEM FLAG TABLE
    tbl_poitemx-po_item                = ws_posnr.
    tbl_poitemx-po_itemx               = ws_flg.
    tbl_poitemx-material               = ws_flg.
    tbl_poitemx-plant                  = ws_flg.
    tbl_poitemx-item_cat               = ws_flg.
    tbl_poitemx-quantity               = ws_flg.
    APPEND tbl_poitemx.
    CLEAR tbl_poitemx.
ENDLOOP.
ENDFORM.                    "CREATE_PO
*&      Form
      text
--> p1        text
<-- p2        text
FORM create_purhase_order .
CLEAR: tbl_poitem,
          tbl_poitemx,
          ws_poheader,
          ws_poheaderx.
REFRESH: tbl_poitem,
            tbl_poitemx.
CLEAR : tbl_return.
REFRESH: tbl_return.
*<--- Bapi to create Purchase order
IF NOT tbl_poitem[] IS INITIAL.
    CALL FUNCTION 'BAPI_PO_CREATE1'
      EXPORTING
        poheader         = ws_poheader
        poheaderx        = ws_poheaderx
      IMPORTING
        exppurchaseorder = ws_purchaseorder
      TABLES
        return           = tbl_return
        poitem           = tbl_poitem
        poitemx          = tbl_poitemx.
    READ TABLE tbl_return WITH KEY type = 'E'.
*<--- Bapi to commit the changes
    IF sy-subrc <> 0.
      CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
        EXPORTING
          wait = 'X'.
    ENDIF.
ENDIF.
LOOP AT tbl_return.
*<--- Ignore the warning messages
    IF tbl_return-type = 'W'.
      CONTINUE.
    ENDIF.
    FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
    IF tbl_return-type = 'S'.
      FORMAT COLOR COL_POSITIVE ON.
    ELSEIF tbl_return-type = 'W'.
      FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
    ELSEIF tbl_return-type = 'E'.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED OFF.
    ENDIF.
    WRITE:/3 tbl_return-type,12 tbl_return-id,20(85) tbl_return-message
           86(10) tbl_return-field,95(20) tbl_return-system.
    FORMAT COLOR OFF.
ENDLOOP.
ENDFORM.                    " create_purhase_order
*&      Form get_open_quantities
      text
--> p1        text
<-- p2        text
FORM get_open_quantities .
CHECK NOT it_mard[] IS INITIAL.
SELECT      ekkoebeln ekpoebelp ekpowerks ekpomatnr
              ekpomenge eketetenr eket~wemng
              INTO CORRESPONDING FIELDS OF TABLE it_po
FROM        ekko AS ekko
INNER JOIN ekpo AS ekpo
ON          ekpoebeln EQ ekkoebeln
INNER JOIN eket AS eket
ON          eketebeln EQ ekpoebeln AND
              eketebelp EQ ekpoebelp
FOR         ALL ENTRIES IN it_mard
WHERE       ekko~bstyp EQ 'F'             AND
              ekko~bsart EQ 'Z3'            AND
              ekko~bsakz EQ 'T'             AND
              ekko~loekz EQ space           AND
              ekpo~matnr EQ it_mard-matnr   AND
              ekpo~werks EQ it_mard-werks   AND
              ekpo~loekz EQ space           AND
              ekpo~elikz EQ space.
SORT it_po BY ebeln ebelp etenr.
delete entries where the schedule is complete, else copy to new table
LOOP AT it_po.
    IF it_po-wemng GE it_po-menge.
      DELETE it_po.
    ELSE.
      MOVE-CORRESPONDING it_po TO it_po_2.
      APPEND it_po_2.
      CLEAR it_po_2.
    ENDIF.
ENDLOOP.
SORT it_po_2 BY matnr werks.
To determine the pending quantities of the materials at plant level
LOOP AT it_po_2.
    AT NEW werks.
      it_po_pend-matnr = it_po_2-matnr.
      it_po_pend-werks = it_po_2-werks.
    ENDAT.
    it_po_pend-pendi = it_po_pend-pendi + it_po_2-menge - it_po_2-wemng.
    AT END OF werks.
      APPEND it_po_pend.
      CLEAR it_po_pend.
    ENDAT.
ENDLOOP.
ENDFORM.                    " get_open_quantities
*&      Form determine_mat_qty_required
      text
--> p1        text
<-- p2        text
FORM determine_mat_qty_required .
DATA: lv_eisbe LIKE marc-eisbe,
        lv_labst LIKE mard-labst,
        lv_menge LIKE eket-menge,
      lv_bstmi_old LIKE marc-bstmi,
        lv_bstrf_old LIKE marc-bstrf,
        lv_beskz_old LIKE marc-beskz,
        lv_sobsl_old LIKE marc-sobsl,
        lv_pendi LIKE eket-menge,
        lv_total_conf     LIKE ekpo-menge,
      lv_bstmi          LIKE marc-bstmi,
      lv_min_qty        LIKE marc-bstmi,
        lv_bstrf          LIKE marc-bstrf,
        lv_min_qty        LIKE marc-bstrf,
        lv_qty_req        LIKE mard-labst,
        lv_remainder      TYPE i.
LOOP AT it_marc.
safety stock
    lv_eisbe = it_marc-eisbe.
   lv_bstmi_old = it_marc-bstmi.
     lv_bstrf_old = it_marc-bstrf.
     lv_beskz_old = it_marc-beskz.
     lv_sobsl_old = it_marc-beskz.
    READ TABLE it_mard
    WITH KEY matnr = it_marc-matnr
             werks = it_marc-werks
             BINARY SEARCH.
    IF sy-subrc EQ 0.
    qty onhand
      lv_labst = it_mard-labst.
    ELSE.
      CLEAR lv_labst.
    ENDIF.
    READ TABLE it_po_pend
    WITH KEY matnr = it_marc-matnr
             werks = it_marc-werks
             BINARY SEARCH.
    IF sy-subrc EQ 0.
    PO pending qty
      lv_pendi = it_po_pend-pendi.
    ELSE.
      CLEAR lv_pendi.
    ENDIF.
Total qty on hand & PO qty pending
    lv_total_conf = lv_labst + lv_pendi.
Now determine if a PO is required for the material concerned.
    IF lv_total_conf < lv_eisbe.
      it_sto-matnr = it_marc-matnr.
      it_sto-werks = it_marc-werks.
      it_sto-eisbe = lv_eisbe.
    it_sto-bstmi = lv_bstmi_old.
      it_sto-bstrf = lv_bstrf_old.
      it_sto-beskz = lv_beskz_old.
      it_sto-sobsl = lv_sobsl_old.
      it_sto-labst = lv_labst.
      it_sto-pendi = lv_pendi.
    Actual Qty Required
      lv_qty_req = lv_eisbe - lv_total_conf.
     IF it_marc-bstmi IS INITIAL.
       IF it_marc-bstrf IS INITIAL.
        it_sto-orqty = lv_qty_req.
      ELSE.
       lv_bstmi = it_marc-bstmi.
       lv_min_qty = it_marc-bstmi.
         lv_bstrf = it_marc-bstrf.
         lv_min_qty = it_marc-bstrf.
        DO.
          IF lv_qty_req <= lv_min_qty.
            lv_qty_req = lv_min_qty.
            it_sto-orqty = lv_qty_req.
            EXIT.
          ELSE.
           lv_min_qty = lv_min_qty + lv_bstmi.
             lv_min_qty = lv_min_qty + lv_bstrf.
          ENDIF.
        ENDDO.
      ENDIF.
      APPEND it_sto.
      CLEAR it_sto.
    ENDIF.
ENDLOOP.
SORT it_sto BY werks matnr.
ENDFORM.                    " determine_mat_qty_required
*&      Form print_details
      text
--> p1        text
<-- p2        text
FORM print_details .
LOOP AT it_sto.
    WRITE:/ it_sto-werks UNDER text-h01,
            it_sto-matnr UNDER text-h02,
            it_sto-orqty UNDER text-h03,
            it_sto-eisbe UNDER text-h04,
          it_sto-bstmi UNDER text-h05,
            it_sto-bstrf UNDER text-h05,
            it_sto-labst UNDER text-h06,
            it_sto-pendi UNDER text-h07.
ENDLOOP.
ENDFORM.                    " print_details
*&      Form print_header
      text
--> p1        text
<-- p2        text
FORM print_header .
WRITE: AT 001 text-h01,
             015 text-h02,
           030 text-h03,
           050 text-h04,
           070 text-h05,
           090 text-h06,
           110 text-h07.
             030 text-h03 RIGHT-JUSTIFIED,
             050 text-h04 RIGHT-JUSTIFIED,
             070 text-h05 RIGHT-JUSTIFIED,
             090 text-h06 RIGHT-JUSTIFIED,
             110 text-h07 RIGHT-JUSTIFIED.
NEW-LINE.
ENDFORM.                    " print_header
*&      Form create_po
      text
--> p1        text
<-- p2        text
FORM create_po .
*-Document date with flag
ws_poheader-doc_date             = sy-datum.
ws_poheaderx-doc_date            = ws_flg.
*-Document type with flag
ws_poheader-doc_type             = 'Z3'(c01).
ws_poheaderx-doc_type            = ws_flg.
*-Purchasing group with Flag
ws_poheader-pur_group            = '005'.   " hardcoded
ws_poheaderx-pur_group           = ws_flg.
*-Purchasing Organization with flag
ws_poheader-purch_org            = '2000'.
ws_poheaderx-purch_org           = ws_flg.
*-Supply plant with flag
ws_poheader-suppl_plnt           = '2000'.
ws_poheaderx-suppl_plnt          = ws_flg.
*-Company Code with flag
ws_poheader-comp_code            = '2000'.
ws_poheaderx-comp_code           = ws_flg.
LOOP AT it_sto.
    AT NEW werks.
      CLEAR tbl_poitem.
      CLEAR tbl_poitemx.
      CLEAR tbl_return.
      CLEAR tbl_posched.
      CLEAR tbl_poschedx.
      REFRESH tbl_poitem.
      REFRESH tbl_poitemx.
      REFRESH tbl_return.
      REFRESH tbl_posched.
      REFRESH tbl_poschedx.
      CLEAR ws_posnr.
    ENDAT.
    ws_posnr = ws_posnr + 10.
Item Data
    tbl_poitem-po_item                 = ws_posnr.
    tbl_poitem-material                = it_sto-matnr.
    tbl_poitem-item_cat                = 'U'(c02).
    tbl_poitem-plant                   = it_sto-werks.
    tbl_poitem-quantity                = it_sto-orqty.
    APPEND tbl_poitem.
    CLEAR tbl_poitem.
Item X Data
    tbl_poitemx-po_item                = ws_posnr.
    tbl_poitemx-po_itemx               = ws_flg.
    tbl_poitemx-material               = ws_flg.
    tbl_poitemx-plant                  = ws_flg.
    tbl_poitemx-item_cat               = ws_flg.
    tbl_poitemx-quantity               = ws_flg.
    APPEND tbl_poitemx.
    CLEAR tbl_poitemx.
Schedule Data
    tbl_posched-po_item = ws_posnr.
    tbl_posched-sched_line = '0001'.
    tbl_posched-delivery_date = sy-datum.
    tbl_posched-quantity = it_sto-orqty.
    APPEND tbl_posched.
    CLEAR tbl_posched.
Schedule Data X
    tbl_poschedx-po_item = ws_posnr.
    tbl_poschedx-po_itemx = ws_flg.
    tbl_poschedx-sched_line = '0001'.
    tbl_poschedx-sched_linex = ws_flg.
    tbl_poschedx-delivery_date = ws_flg.
    tbl_poschedx-quantity = ws_flg.
    APPEND tbl_poschedx.
    CLEAR tbl_poschedx.
    AT END OF werks.
    Create the PO
      CALL FUNCTION 'BAPI_PO_CREATE1'
        EXPORTING
          poheader         = ws_poheader
          poheaderx        = ws_poheaderx
        IMPORTING
          exppurchaseorder = ws_purchaseorder
        TABLES
          return           = tbl_return
          poitem           = tbl_poitem
          poitemx          = tbl_poitemx
          poschedule       = tbl_posched
          poschedulex      = tbl_poschedx.
      LOOP AT tbl_return WHERE type EQ 'E' OR type EQ 'A'.
        EXIT.
      ENDLOOP.
    If Loop is false - then no error occurred
      IF sy-subrc NE 0.
      No Errors - Commit
        CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
          EXPORTING
            wait = 'X'.
      ENDIF.
      SKIP.
      LOOP AT tbl_return.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        IF tbl_return-type = 'E' OR tbl_return-type = 'A'.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED OFF.
        ELSEIF tbl_return-type = 'W'.
          FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
        ELSE.
          FORMAT COLOR COL_POSITIVE ON.
        ENDIF.
        WRITE:/3 tbl_return-type,12 tbl_return-id,20(85)
tbl_return-message,
               86(10) tbl_return-field,95(20) tbl_return-system.
        FORMAT COLOR OFF.
      ENDLOOP.
    ENDAT.
ENDLOOP.
ENDFORM.                    " create_po

Hi,
first you can store these 2 dates into some internal table sat it_sobid and it_ObjectID.Now
sort it_sobid ascending.
loop at it_ObjectID.
Read date from it_sobid binary search index sy-index.
it_ObjectID-date = it_sobid-date.
flag = 'y'.
endloop.
you can write some logic like this. Its just a rough idea you can modify according to ur need.
Regards,
Ravi

Need details about Satellite S35DVD and memory upgrade

I've got a used Toshiba Satellite S35DVD Notebook from a friend.
Unfortunately I have no infromation about this notebook and there's also no information on the web available.
The Toshiba Support sites also don't knwo this kind of notebook.
Anybody out there who can give me some information, links for w2k drivers, tech specs, ...
Most interesting for me is the max supported ram size for upgrade.
tia

Are you sure that this is a Satellite S35DVD?
Check the labels at the bottom of the unit. There should be a model number or series number. This would be interesting

Need Help with 266 (tray type) Memory upgrade

Greetings All:
I have obtained my first Mac: an iMac 266 (the CD tray load type). I have replaced the hard drive and am now working on the RAM memory. I see the the "upper" slot. I'm guessing the "lower" slot is under the circuit board that fills the metal cage with the processer chip (?). If this is true any suggestions on how to remove it? I removed the one screw on the outside corner but removing the cage is very stubborn so I'm holding off continuing until I get some advice on this.
Thanks.
imac 266 Mac OS 9.1.x

check out http://www.djonmac.com/ it should hopefully be helpful. I remember it being a bit stubborn when I did my ram upgrade.

Need urgent help for solving issue with my audio output.

It seems that all of sudden my integrated speakers started to make buzzing sound for a minute of a sec. and the sound comes randomly only during playback. Same thing also happens even on headphone. So any suggestions? Why it is happening??

Hi
Try to update the driver from hp.com website for Audio & Bios.
Last step is to run a recovery on the unit before this please back up your data as it will be lost.
If still does not work speaker on the unit has gone bad needs to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the speaker replaced.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Need urgent help for (Message file sp1 lang .msb not found)

sir
c:\oracle9i this is my database folder name
c:\oraform this is my form folder name
which one my oracle_home name
sir i test this command
c:\ set ORACLE_HOME=c:\ORACLE9I
c:\ set ORACLE_SID=AAMIR
c:\ sqlplus / as sysdba
AND RUN SQL PLUS THEN SYSTEM GIVE ME THIS ERROR
incorrect environment variable plus_dflt program execution error
please give me idea how i run my system
thank

Duplicate post:
''Urgent'' incorrect environment variable plus_dflt program execution erro

Need urgent Help for setting up iCal Server

I will move the iCal portion here, maybe I will get some help.
Okay first my setup:
Two XServe with the latest 10.5 (one is the backup)
Six Mac Pros with Leopard
Three Macbook Pros with Snow Leopard
All Macs are on an Windows 2003 Active Directory network. Also we have our accounts locally (on each workstation and laptop).
*So I have installed the advanced settings for the Server OS.
*Created a account for every user on the server
*The FTP, Web (for the local webpage), Open Directory and iCal services are on. (iCal would only activate with Open Directory service??)
*The iCal server destination (for the calendars) are on a separate drive with +Ignore Permissions+
Still can not link a account through iCal with the server!
Could somebody give me a walkthrough how to setup the iCal server?
Oh yeah another issue I had I can't get the calendaring checkbox in the user account to stick! Is this just a bug?

Hi Umesh,
I would not use the repository on a database that was cloned. In my experience this leads to problems.
A better way is to clone the database and then create a new repository on the clone:
1. export the repository on the windows server to an mdl file
2. unregister all target users on solaris
3. drop the repository on solarais
4. create a new repository on solaris
5. Import the data from the mdl file you exported in step 1
6. register target users
7. configure and register the locations
This way requires some manual work, but I do not see another way.
Regards,
Carsten.

Need to know which is better and faster for laptop memory upgrade

What is the difference and which is better for a laptop memory upgrade: SDRAM, DDR SDRAM, SIMM? One site suggested DDR SDRAM and BB suggested SO DIMM

SODIMM is the physical form factor of the module, DDR SDRAM is the actual memory type.
SIMMs are an ANCIENT form of memory module. If you have a system that uses SIMMS, you will spend less money throwing your computer in the trash and buying a new one.
Non-DDR SDRAM is also ancient.
Each system can only use one type of memory, i.e. you can't use DDR memory in a system that only used non-DDR memory, and you can't use DDR2 memory in a DDR system.
To find out if the configuration is 2x256 or 1x512, you'll need to look at what is installed.
*disclaimer* I am not now, nor have I ever been, an employee of Best Buy, Geek Squad, nor of any of their affiliate, parent, or subsidiary companies.

Memory Upgrade for T61

Hi friends,
I have a T61 7663-xxx system, with 1 GB PC2-5300 667 MHz RAM. My Front Side Bus is 800 MHz ( I think so!), Everest software reports my memory controller is dual channel capable, and ~ 85% physical utilization of RAM. I have a nVidia Quadro NVS 140M 128 MB graphics card, but Everest reports 512 MB ?
I would like to upgrade my RAM, and buy some online.
a) Should I buy a similar 2 GB PC2-5300 RAM for my system for performance boost, running Windows XP 32 bit? If so, should I buy Lenovo RAM only, for maintaining my 3 year warranty intact?
Only ThinkPad and Lenovo memory will assume ThinkPad and Lenovo notebook systems limited warranty
b) What are the other best alternatives for good quality, reliable laptop memory, besides Lenovo?
c) Would it be better if I am able to buy RAM which can match my FSB? Will this have any performance benefit? Do these similar FSB speed RAM exist?
Kindly suggest top memory makers, if any.
I could not find any Lenovo 800 MHz memory from their website.
Kindly help me solve my memory upgrade problem.
I am a mechanical engineering student, hence I don't have any idea about FSB and the like, so I request the learned members to cast light on this area.
Info about reputed online sites in US, with fast delivery will be very much appreciated.
Thanks in advance.
Best Regards,
Raiden
TU Hamburg, Germany
Solved!
Go to Solution.

Hmm. As far as I know, the internal graphics card can't be upgraded. There's some dock you can buy that lets you add a graphics card for use with an external monitor, but I don't know much about it. The cpu is more likely to be upgradeable, but don't attempt unless you know a decent amount about hardware servicing. Also, make sure the cpu will be supported by the motherboard! Best not to buy one with a clockspeed higher than what Lenovo sold (core 2 duo at 2.6 ghz).
Why do you want to upgrade so much? I run 2.1ghz with discrete graphics and 2gb ram under Vista, and it runs beautifully. If you have integrated graphics, then that might be a bit of a pain, but hey, you've got better battery life!
Anyway, I'd look more into de-cluttering your computer to speed stuff up. Remove anything you don't need, especially Lenovo tools that run in the background and you may not need. Turn off search indexing (slower searches, but faster overall performance). There are some nice guides online, if you google "vista tuneup."
Good luck! Enjoy your T61 as it is! It's a lovely laptop

Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

Hello Guys,
We are in Designing phase Data Modeling of PDW/APS Implementation Project.
I need urgent help in making a checklist from a DBA perspective.
Like what are things ill be needing at a time of implementation/Deployment.
Your expert comments and help will be highly appreciated.
Thank you,
Anish.S
Asandeen

You can get good summary of checklist from this article about
DBA checklist for data warehousing.
Which highlights on below pointers:
New system or old. (I.e. Up-gradation vs starting from scratch)
Complexity of SQL Server architecture
SQL Server storage
Determining SQL Server processing power
SQL Server installation consideration
SQL Server configuration parameter
SQL Server security
SQL Server Database property
SQL Server jobs and automation
Protecting SQL Server data
SQL Server health monitoring and check ups
SQL Server ownership and control
based on my real time experience, I will suggest you to keep an eye on
Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
System availability (Check for Windows update and up time configuration)
Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
Source control mechanism
Disk space and memory usage
You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
Proper implementation of Landing , Staging and Mart tables.
Column size (this can drastically decrease your database size)
Usage of indexes (Index are good, but at what cost?)
I hope this will assist you in building your check list.

Upgrading from 10.4.11 to 10.7. What are the steps and do I also need to pay for 10.5 and 10.6 along the way?

Hi. I wannt to upgrade from 10.4.11 to 10.7.
What are the steps and do I also need to pay for 10.5 and 10.6 along the way?
According to the 10.7 lion page on 'store' it says that you need 10.6 to use it does this mean I'm going to have to do 3 upgrades?
Thanks

Why do yoy want Lion/10.7???
Anyway, if your Mac meets the requirements you can skip 10.5.x, and even 10.6.x if you can afford to erase all your data.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 4GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Lion/101.7 System requirements
    •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
    •    At least 2GB of memory[14]
    •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
    •    At least 4GB of disk space for downloading[14]
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
http://www.apple.com/macosx/how-to-buy/
What applications are not compatible with Mac OS X 10.7 "Lion"?
http://ow.ly/5Iz09
http://roaringapps.com/apps:table

Need urgent decission for DV6-3112sa memory upgrade

Similar Messages

Maybe you are looking for