Need urgent help for solving issue with my audio output.

It seems that all of sudden my integrated speakers started to make buzzing sound for a minute of a sec. and the sound comes randomly only during playback.  Same thing also happens even on headphone. So any suggestions? Why it is happening?? 

Hi
Try to update the driver from hp.com website for Audio & Bios.
Last step is to run a recovery on the unit before this please back up your data as it will be lost.
If still does not work speaker on the unit has gone bad needs to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the speaker replaced.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Similar Messages

  • Need urgently help for OBIEE Installation (11g)

    Hi all,
    I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
    The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
    The log under the Inventory directory shows me only following:
    INFO: Ending the inventory Session
    INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    INFO: The ORACLE_CONFIG_HOME env var is set to
    I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
    I need urgently help. I would appreciate someone could help me.
    We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
    I hope to find the help I need. I am desperated :-(

    Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
    would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
    Thanks,
    JD

  • Need Urgent Help. ORA-12500 with no reason

    I need urgent help.
    I have 8.1.7.2.1 on Win2K.
    I get ORA-12500 error when trying to connect oracle instance. This problem begin to arise only when number of sessions reach a number about 200. At the same time there is no definite boundary for it. Once it happened when there were 216 session, then 196, then 206.
    There rarely (1/100) I get ORA-12514 and after again ORA-12500. Once I got ORA-12600.
    What it might be you think? It can't be a problem in listener.ora or in tnsnames.ora because it works fine if number of sessions is about 100. It tried to restart tnslistener (from lsnrctl and the service) and restarted database (but not the service). I did it different in sequences, but didn't help. What should I do? Is it a known bug?

    I need urgent help.
    I have 8.1.7.2.1 on Win2K.
    I get ORA-12500 error when trying to connect oracle instance. This problem begin to arise only when number of sessions reach a number about 200. At the same time there is no definite boundary for it. Once it happened when there were 216 session, then 196, then 206.
    There rarely (1/100) I get ORA-12514 and after again ORA-12500. Once I got ORA-12600.
    What it might be you think? It can't be a problem in listener.ora or in tnsnames.ora because it works fine if number of sessions is about 100. It tried to restart tnslistener (from lsnrctl and the service) and restarted database (but not the service). I did it different in sequences, but didn't help. What should I do? Is it a known bug? bash-2.03$ oerr ora 12500
    12500, 00000, "TNS:listener failed to start a dedicated server process"
    // *Cause:  The process of starting up a dedicated server process failed.
    // The executable could not be found or the environment may be set up
    // incorrectly.
    // *Action: Turn on tracing at the ADMIN level and reexecute the operation.
    // Verify that the ORACLE Server executable is present and has execute
    // permissions enabled. Ensure that the ORACLE environment is specified
    // correctly in LISTENER.ORA. The Oracle Protocol Adapter that is being
    // called may not be installed on the local hard drive. Please check that
    // the correct Protocol Adapter are successfully linked.
    // If error persists, contact Oracle Customer Support.
    There is not enough info to go on but the problem seems to be either in the listener.ora
    or tnsnames.ora. Did you make any changes before this started occurring?
    William

  • Need urgent Help for Kernel upgrade......

    Hi Gurus,
    I have recently upgraded SAP kernel from  Release 6.40 Patch 109 to Release 6.40 Patch 175. My System is SAP ERP Central Component 5.0 and Release is 6.40 and Kernel Stataus is showing below details:
    Kernel release    640
    Compilation       SunOS 5.8 G
    Patch Level       175
    ABAP Load         1521
    CUA load          16
    Mode              opt
    ~
    I have total 8 Application servers. today I have genereated EWA report and in that report, for SAP kernel section it has reported that <b>"You are running different SAP kernel releases on your instances. This situation may lead to severe problems and is not supported by SAP.
    Recommendation: Use only one kernel release for all instances."</b>
    Actaully I have updated kernel in my central instance (/sapmnt/<SID>/exe) and this directory is NFS mount in all the application server. So I am not sure why the SAP EWA is repoting this that you are running difference SAP Kerenl release.
    If this is correct then how to rectify it ? what action I need to take to resolve this ?
    Appreciate your help.
    Thanks & Regards
    Basis

    I will plan to do that as early as possible. Even I
    am going to write to SAP to release that note in
    english for better understanding.
    yes - that note should be translated giving the importance.
    My question is: Am I on HIGH ALERT for this issue ?
    Since it is production server, will it going to
    affect my system in any aspect ??
    No, you will just see a slightly higher usage of "nfsd" when you start the application servers for the first time since they will all copy parts of the kernel locally.
    2nd thing, This is applicable only to NW ? Because I
    have upgraded SAP Kernel to Patch 175 to other R/3
    system having more application server, but I didn't
    get this comment in my EWA report ?
    The comment isn´t related to to usage of sapcpe. The comment means, that you have at least one application server, that uses local binaries with a different patchlevel instead of those on the central instance. I would consider that more critical. Maybe you installed one of the servers later and used a newer installation CD set which creates that new structure for using sapcpe by default... don´t know, just a guess. To check, go to SM51 and select each server and press on "Release Information", you will see which one is affected.
    This week I am planning to upgrade kernel for 4.6D
    release to Patch 2307. Will this be gona issue for
    that also ?
    Kernels lower than 6.10 use a different approach (the "ctrun directory" mentioned in that note) - technically it´s the same. The installation guides for 4.6c should tell you how to set that up.
    Markus

  • Needed urgent help for user creation in security manager in ODI 11g

    Hi Gurus,
    I have an urgent requirement in ODI security manager and i am completely helpless. We need specific steps for the user creation with sufficient priviledges. The detailed requirements are:
    1. There is a group of users under the framework team and these users should be able to edit the Knowledge modules only. All other objects (e.g. projects, interface, procedures or development related objects) should only be in read only mode for them.
    2. There is a group of users under the development team. The priviledges of these users should be mutually exclusive to that of the framework team users. i.e. the development team should be able to edit or delete all development related objects (e.g. projects, interface, proc etc.) but the knowledge modules should only be in read only mode for them.
    Now I will explain what i have tried out:
    I am working on ODI 11.1.1.5.
    I have created a user with NG DESIGNER and CONNECT profile. Dragged and dropped all the projects on the user and selected all methods in all repositories (check sign). However when i connect with that user i cannot open the KMs (as far as development team is concerned its fine) but i can also not open interfaces as well as procedures (which is not acceptable from development point of view).
    Also when i tried creating a user from the framework team point of view i could not see any option related to KMs (To give edit priviledge).
    Please help me out guys. I have also searched oracle documentation and believe me the security manager section is not very good. If you guys can help me out with specific steps it would be great (I have tried the hints given in oracle documentation and they dont work, the ODI security manager behaves strangely :-(
    Thanks in advance,
    SB

    Similar requirement here guys. Any pointers. I was able to achieve this by restricting development user from supervisor access. In that case the development user can not edit the interfaces. Any known defefct?

  • I need urgent help for the logic

    hi all,
    Initially, the requirement was to create PO regardless the Purchase Requisition based on the formula
    If (Open Qty + Current Stock) < Safety Stock ==>> THEN A PO NEEDS TO BE CREATED
    This is absolutely fine, this created the PO as per the above condition.
    OUR REQUIREMENT
    Modify the same program to create PO's only if there is any PR for that material . Meaning, turn all the PR's into PO. Also, when creating PO, the delivery date should be = (Current date - 7 days) when creating a PO for an PR(I think the table name is VETVG.)  Nothing else. We need to change the  IF condition in the following code .
    so can any one let me that what modification i need to do ie what logic i should use to get the requirement fullfilled.
    *Report  Z_STO_SAFETY_STOCK                                            *
    Program Name : Z_STO_SAFETY_STOCK                                    *
    Date         : 09.03.2007                                            *
    Programmer   : Rajdeep Kumar
    Last Change  : Van Tran                22/03/2007                    *
    Specification:                                                       *
    Program Type : Report                                                *
    Description  : Create STO requirement for Plant
    Transaction  : None                                                  *
    Input Files  : None                                                  *
    Output Files : None                                                  *
    Scheduling Issues :                                                  *
    Run Frequency :                                                      *
    Mod#    Date          By            Description                      *
    New   09.03.2007   Rajdeep Kumar     Created                         *
                       DEVK905890                                        *
    M01   20.03.2007   Rajdeep Kumar     Material Group Added to         *
                       DEVK905892        Selection Screen                *
    *Update 05.04.2007   DEVK906082        Added two new selection         *
                                         fields beskz and sobsl          *
                                         and is select statement         *
    REPORT  z_sto_safety_stock NO STANDARD PAGE HEADING.
    *&                       TABLES
    TABLES:
            t001w,
          marc.                                               " M01
            marc,                                               " M01
            mara.                                               " M01
    *&                     DATA DECLARATION
    DATA: BEGIN OF it_marc OCCURS 0,
            matnr LIKE marc-matnr,
            werks LIKE marc-werks,
            eisbe LIKE marc-eisbe,
          bstmi LIKE marc-bstmi,
            bstrf LIKE marc-bstrf,
            beskz LIKE marc-beskz,
            sobsl LIKE marc-sobsl,
          END OF it_marc.
    DATA: BEGIN OF it_mard OCCURS 0,
            matnr LIKE mard-matnr,
            werks LIKE mard-werks,
            labst LIKE mard-labst,
          END OF it_mard.
    DATA: BEGIN OF it_po OCCURS 0,
            ebeln LIKE ekko-ebeln,
            werks LIKE ekpo-werks,
            ebelp LIKE ekpo-ebelp,
            loekz LIKE ekpo-loekz,
            etenr LIKE eket-etenr,
            matnr LIKE ekpo-matnr,
            menge LIKE eket-menge,
            wemng LIKE eket-wemng,
          END OF it_po.
    DATA: BEGIN OF it_po_2 OCCURS 0,
            matnr LIKE ekpo-matnr,
            werks LIKE ekpo-werks,
            ebeln LIKE ekko-ebeln,
            ebelp LIKE ekpo-ebelp,
            loekz LIKE ekpo-loekz,
            etenr LIKE eket-etenr,
            menge LIKE eket-menge,
            wemng LIKE eket-wemng,
          END OF it_po_2.
    DATA: BEGIN OF it_po_pend OCCURS 0,
            matnr LIKE ekpo-matnr,
            werks LIKE ekpo-werks,
            pendi LIKE eket-menge,
          END OF it_po_pend.
    DATA: BEGIN OF wa_join OCCURS 0,
            ebeln LIKE ekko-ebeln,
            werks LIKE ekpo-werks,
            ebelp LIKE ekpo-ebelp,
            loekz LIKE ekpo-loekz,
            etenr LIKE eket-etenr,
            matnr LIKE ekpo-matnr,
            menge LIKE eket-menge,
            wemng LIKE eket-wemng,
          END OF wa_join.
    DATA : BEGIN OF itab_marc_mard OCCURS 0,
             werks  LIKE marc-werks,
             matnr  LIKE marc-matnr,
             eisbe  LIKE marc-eisbe,
           bstmi  LIKE marc-bstmi,
             bstrf  LIKE marc-bstrf,
             beskz  LIKE marc-beskz,
             sobsl  LIKE marc-sobsl,
             labst  LIKE mard-labst,
             menge  LIKE ekpo-menge,
             ordqty LIKE ekpo-menge,
           END OF itab_marc_mard.
    DATA: BEGIN OF it_sto OCCURS 0,
          werks LIKE mard-werks,
          matnr LIKE mard-matnr,
          orqty LIKE ekpo-menge,
          eisbe LIKE marc-eisbe,
        bstmi LIKE marc-bstmi,
          bstrf LIKE marc-bstrf,
          beskz LIKE marc-beskz,
          sobsl LIKE marc-sobsl,
          labst LIKE mard-labst,
          pendi LIKE eket-menge,
          END OF it_sto.
    DATA: ws_poheader            LIKE   bapimepoheader.
    DATA: ws_poheaderx           LIKE   bapimepoheaderx .
    DATA: ws_ebeln               TYPE   mepoheader-ebeln.
    DATA: ws_posnr               LIKE   ekpo-ebelp.
    DATA: ws_etenr               LIKE   eket-etenr VALUE '0001'.
    DATA: ws_purchaseorder       LIKE   ekko-ebeln.
    DATA: ws_flg1                TYPE   c. " VALUE 'X'.
    DATA: ws_flg2                TYPE   c.
    DATA: ws_flg3                TYPE   c.
    *-- For Handling Error Messages in BAPI
    DATA: tbl_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
    *-- For Item Details
    DATA: tbl_poitem LIKE bapimepoitem OCCURS 0 WITH HEADER LINE.
    DATA: tbl_poitemx LIKE bapimepoitemx OCCURS 0 WITH HEADER LINE.
    DATA: tbl_posched LIKE bapimeposchedule OCCURS 0 WITH HEADER LINE.
    DATA: tbl_poschedx LIKE bapimeposchedulx OCCURS 0 WITH HEADER LINE.
    *&                       CONSTANTS
    CONSTANTS:   ws_flg            TYPE   c   VALUE 'X'.
    CONSTANTS:   c_unistruct(2)    TYPE   c   VALUE 'Z3'. "For UNISTRUCT STO
    *&                      SELECTION-SCREEN
    SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
    SELECT-OPTIONS: s_werks FOR t001w-werks,
                  s_matnr FOR marc-matnr.                     " M01
                    s_matnr FOR marc-matnr,                     " M01
                    s_matkl FOR mara-matkl,                     " M01
                    s_beskz FOR marc-beskz,
                    s_sobsl FOR marc-sobsl.
    PARAMETERS:     p_test  TYPE check.
    SELECTION-SCREEN : END OF BLOCK b1.
    *&                      START OF SELECTION EVENT
    START-OF-SELECTION.
    Get the Safety Stock & Minimum Lot Size for the materials
      PERFORM get_plant_data.
    Get the Quantities in stock
      PERFORM get_stock_data.
    Determine the open quantities for the materials concerned
    [EKKO, EKET, EKPO]
      PERFORM get_open_quantities.
    PERFORM open_quantities.
    Determine overall the quantities required for each material
      PERFORM determine_mat_qty_required.
    Print the details
      PERFORM print_details.
      IF p_test EQ space.
      PO is created for each plant.
      Create the PO required.
        PERFORM create_po.
      Create the PO's for each plant with the materials required
       PERFORM create_header_item.
      Bapi call to create a Purchase order
       PERFORM create_purhase_order.
      ENDIF.
    END-OF-SELECTION.
    TOP-OF-PAGE.
      PERFORM print_header.
    *&      Form  get_plant_data
          To get the Safety Stock
    -->  p1        text
    <--  p2        text
    FORM get_plant_data .
    start                                                     " M01
    SELECT      matnr werks eisbe bstmi
    INTO TABLE  it_marc
    FROM        marc
    WHERE       matnr IN s_matnr AND
                werks IN s_werks AND
                eisbe GT 0.
    end                                                       " M01
    start                                                     " M01
      SELECT      marc~matnr werks eisbe bstrf beskz sobsl
                                                              " bstmi
      INTO TABLE  it_marc
      FROM        marc AS marc
      INNER JOIN  mara AS mara
      ON          maramatnr EQ marcmatnr
      WHERE       marc~matnr IN s_matnr AND
                  werks      IN s_werks AND
                  matkl      IN s_matkl AND
                  beskz      IN s_beskz AND
                  sobsl      IN s_sobsl AND
                  eisbe      GT 0.
    end                                                       " M01
    ENDFORM.                    " get_plant_data
    *&      Form  get_stock_data
         To get the Current Stock
    -->  p1        text
    <--  p2        text
    FORM get_stock_data .
      DATA: BEGIN OF lt_mard OCCURS 0,
              matnr LIKE mard-matnr,
              werks LIKE mard-werks,
              lgort LIKE mard-lgort,
              labst LIKE mard-labst,
            END OF lt_mard.
      CHECK NOT it_marc[] IS INITIAL.
      SELECT      matnr werks lgort labst
      INTO TABLE  lt_mard
      FROM        mard
      FOR         ALL ENTRIES IN it_marc
      WHERE       matnr EQ it_marc-matnr AND
                  werks EQ it_marc-werks.
      SORT lt_mard BY matnr werks.
      LOOP AT lt_mard.
        AT NEW werks.
          it_mard-matnr = lt_mard-matnr.
          it_mard-werks = lt_mard-werks.
        ENDAT.
        it_mard-labst = it_mard-labst + lt_mard-labst.
        AT END OF werks.
          APPEND it_mard.
          CLEAR  it_mard.
        ENDAT.
      ENDLOOP.
    ENDFORM.                    " get_stock_data
    *&      Form  open_quantities
          text
    -->  p1        text
    <--  p2        text
    FORM open_quantities .
    Storing MARC and MARD data in an internal table to find the open
    quantities
      LOOP AT it_marc.
        itab_marc_mard-matnr = it_marc-matnr.
        itab_marc_mard-werks = it_marc-werks.
        itab_marc_mard-eisbe = it_marc-eisbe.
      itab_marc_mard-bstmi = it_marc-bstmi.
        itab_marc_mard-bstrf = it_marc-bstrf.
        itab_marc_mard-beskz = it_marc-beskz.
        itab_marc_mard-sobsl = it_marc-sobsl.
        READ TABLE it_mard WITH KEY matnr = it_marc-matnr.
        IF sy-subrc EQ 0.
          itab_marc_mard-labst = it_mard-labst.
        ENDIF.
        APPEND itab_marc_mard.
        CLEAR itab_marc_mard.
      ENDLOOP.
      CHECK NOT itab_marc_mard[] IS INITIAL.
    Join EKKO EKPO
      SELECT a~ebeln
             b~ebelp
             b~werks
             b~matnr
             b~menge
             c~etenr
             c~wamng
             INTO CORRESPONDING FIELDS OF TABLE it_po
      FROM ekpo AS b
      INNER JOIN ekko AS a
      ON aebeln = bebeln
      INNER JOIN eket AS c
      ON bebeln = cebeln AND bebelp = cebelp
      FOR ALL ENTRIES IN itab_marc_mard
      WHERE b~matnr = itab_marc_mard-matnr AND
            b~werks IN s_werks .
      DATA : t_menge TYPE ekpo-menge . "local variable
    *Store the contents of it_po to the work area to get the minimum order
    *quantity
      wa_join[] = it_po[].
      LOOP AT it_po.
    delete the entries where MENGE = WAMNG
        DELETE it_po WHERE menge = it_po-wemng.
        LOOP AT wa_join WHERE matnr = it_po-matnr
                               AND werks = it_po-werks.
          t_menge = t_menge + wa_join-menge.
        ENDLOOP.
        it_po-menge = t_menge.
        MODIFY TABLE it_po TRANSPORTING menge.
        CLEAR  :t_menge.
      ENDLOOP.
    Once you get the quantities delete the repeating materials for the
    plant.
      DELETE ADJACENT DUPLICATES FROM it_po COMPARING werks matnr.
      SORT it_po BY matnr.
      LOOP AT itab_marc_mard.
        READ TABLE it_po WITH KEY matnr = itab_marc_mard-matnr
            APPEND it_sto.
        ELSE.
          WRITE:/ 'There are no open quantities to create Purchase order'.
        ENDIF.
        CLEAR it_sto.
      ENDLOOP.                         werks = itab_marc_mard-werks BINARY
    SEARCH.
        itab_marc_mard-ordqty = itab_marc_mard-labst + it_po-menge .
         If Open quantiy + Current Stock < Safety Stock
        IF itab_marc_mard-ordqty LE itab_marc_mard-eisbe.
         Minimum order qty = Safety Stock - (Open qty + current stock)
          itab_marc_mard-ordqty = itab_marc_mard-eisbe - ( it_po-menge +
    itab_marc_mard-labst )  .
           Move all the contents to the internal table it_sto ie Plant,
    Material and the Min Order Qty
           so that we can create PO based on this internal table
          it_sto-matnr = itab_marc_mard-matnr.
          it_sto-werks = itab_marc_mard-werks.
          it_sto-orqty = itab_marc_mard-ordqty.
    ENDFORM.                    " open_quantities
    *&      Form  CREATE_HEADER_ITEM
          text
    FORM create_header_item.
      LOOP AT it_sto.
    *--- Document date with flag
        ws_poheader-doc_date             = sy-datum.
        ws_poheaderx-doc_date            = ws_flg.
    *--- Document type with flag
        ws_poheader-doc_type             = 'Z3'(c01).
        ws_poheaderx-doc_type            = ws_flg.
    *--- Purchasing group with Flag
        ws_poheader-pur_group            = '005'.   " hardcoded
        ws_poheaderx-pur_group           =  ws_flg.
    *--- Purchasing Organization with flag
        ws_poheader-purch_org            = '2000'.
        ws_poheaderx-purch_org           = ws_flg.
    *--- Supply plant with flag
        ws_poheader-suppl_plnt           = '2000'.
        ws_poheaderx-suppl_plnt          = ws_flg.
    *--- Company Code with flag
        ws_poheader-comp_code            = '2000'.
        ws_poheaderx-comp_code           = ws_flg.
    *<--- assinging new item No.
        ws_posnr = ws_posnr + 10.
    *POPULATE ITEM DATA.
        tbl_poitem-po_item                 = ws_posnr.
        tbl_poitem-material                = it_sto-matnr.
        tbl_poitem-item_cat                = 'U'(c02).
        tbl_poitem-plant                   = it_sto-werks.
        tbl_poitem-quantity                = it_sto-orqty.
        APPEND tbl_poitem.
        CLEAR  tbl_poitem.
    *POPULATE ITEM FLAG TABLE
        tbl_poitemx-po_item                = ws_posnr.
        tbl_poitemx-po_itemx               = ws_flg.
        tbl_poitemx-material               = ws_flg.
        tbl_poitemx-plant                  = ws_flg.
        tbl_poitemx-item_cat               = ws_flg.
        tbl_poitemx-quantity               = ws_flg.
        APPEND tbl_poitemx.
        CLEAR  tbl_poitemx.
      ENDLOOP.
    ENDFORM.                    "CREATE_PO
    *&      Form
          text
    -->  p1        text
    <--  p2        text
    FORM create_purhase_order .
      CLEAR:  tbl_poitem,
              tbl_poitemx,
              ws_poheader,
              ws_poheaderx.
      REFRESH:  tbl_poitem,
                tbl_poitemx.
      CLEAR  : tbl_return.
      REFRESH: tbl_return.
    *<--- Bapi to create Purchase order
      IF NOT tbl_poitem[] IS INITIAL.
        CALL FUNCTION 'BAPI_PO_CREATE1'
          EXPORTING
            poheader         = ws_poheader
            poheaderx        = ws_poheaderx
          IMPORTING
            exppurchaseorder = ws_purchaseorder
          TABLES
            return           = tbl_return
            poitem           = tbl_poitem
            poitemx          = tbl_poitemx.
        READ TABLE tbl_return WITH KEY type = 'E'.
    *<--- Bapi to commit the changes
        IF sy-subrc <> 0.
          CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
            EXPORTING
              wait = 'X'.
        ENDIF.
      ENDIF.
      LOOP AT tbl_return.
    *<--- Ignore the warning messages
        IF tbl_return-type = 'W'.
          CONTINUE.
        ENDIF.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        IF tbl_return-type = 'S'.
          FORMAT COLOR COL_POSITIVE ON.
        ELSEIF tbl_return-type = 'W'.
          FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
        ELSEIF tbl_return-type = 'E'.
          FORMAT COLOR COL_NEGATIVE INTENSIFIED OFF.
        ENDIF.
        WRITE:/3 tbl_return-type,12 tbl_return-id,20(85)  tbl_return-message
               86(10) tbl_return-field,95(20) tbl_return-system.
        FORMAT COLOR OFF.
      ENDLOOP.
    ENDFORM.                    " create_purhase_order
    *&      Form  get_open_quantities
          text
    -->  p1        text
    <--  p2        text
    FORM get_open_quantities .
      CHECK NOT it_mard[] IS INITIAL.
      SELECT      ekkoebeln ekpoebelp ekpowerks ekpomatnr
                  ekpomenge eketetenr eket~wemng
                  INTO CORRESPONDING FIELDS OF TABLE it_po
      FROM        ekko AS ekko
      INNER JOIN  ekpo AS ekpo
      ON          ekpoebeln EQ ekkoebeln
      INNER JOIN  eket AS eket
      ON          eketebeln EQ ekpoebeln AND
                  eketebelp EQ ekpoebelp
      FOR         ALL ENTRIES IN it_mard
      WHERE       ekko~bstyp EQ 'F'             AND
                  ekko~bsart EQ 'Z3'            AND
                  ekko~bsakz EQ 'T'             AND
                  ekko~loekz EQ space           AND
                  ekpo~matnr EQ it_mard-matnr   AND
                  ekpo~werks EQ it_mard-werks   AND
                  ekpo~loekz EQ space           AND
                  ekpo~elikz EQ space.
      SORT it_po BY ebeln ebelp etenr.
    delete entries where the schedule is complete, else copy to new table
      LOOP AT it_po.
        IF it_po-wemng GE it_po-menge.
          DELETE it_po.
        ELSE.
          MOVE-CORRESPONDING it_po TO it_po_2.
          APPEND it_po_2.
          CLEAR  it_po_2.
        ENDIF.
      ENDLOOP.
      SORT it_po_2 BY matnr werks.
    To determine the pending quantities of the materials at plant level
      LOOP AT it_po_2.
        AT NEW werks.
          it_po_pend-matnr = it_po_2-matnr.
          it_po_pend-werks = it_po_2-werks.
        ENDAT.
        it_po_pend-pendi = it_po_pend-pendi + it_po_2-menge - it_po_2-wemng.
        AT END OF werks.
          APPEND it_po_pend.
          CLEAR  it_po_pend.
        ENDAT.
      ENDLOOP.
    ENDFORM.                    " get_open_quantities
    *&      Form  determine_mat_qty_required
          text
    -->  p1        text
    <--  p2        text
    FORM determine_mat_qty_required .
      DATA: lv_eisbe LIKE marc-eisbe,
            lv_labst LIKE mard-labst,
            lv_menge LIKE eket-menge,
          lv_bstmi_old LIKE marc-bstmi,
            lv_bstrf_old LIKE marc-bstrf,
            lv_beskz_old LIKE marc-beskz,
            lv_sobsl_old LIKE marc-sobsl,
            lv_pendi LIKE eket-menge,
            lv_total_conf     LIKE ekpo-menge,
          lv_bstmi          LIKE marc-bstmi,
          lv_min_qty        LIKE marc-bstmi,
            lv_bstrf          LIKE marc-bstrf,
            lv_min_qty        LIKE marc-bstrf,
            lv_qty_req        LIKE mard-labst,
            lv_remainder      TYPE i.
      LOOP AT it_marc.
      safety stock
        lv_eisbe = it_marc-eisbe.
       lv_bstmi_old = it_marc-bstmi.
         lv_bstrf_old = it_marc-bstrf.
         lv_beskz_old = it_marc-beskz.
         lv_sobsl_old = it_marc-beskz.
        READ TABLE it_mard
        WITH KEY matnr = it_marc-matnr
                 werks = it_marc-werks
                 BINARY SEARCH.
        IF sy-subrc EQ 0.
        qty onhand
          lv_labst = it_mard-labst.
        ELSE.
          CLEAR lv_labst.
        ENDIF.
        READ TABLE it_po_pend
        WITH KEY matnr = it_marc-matnr
                 werks = it_marc-werks
                 BINARY SEARCH.
        IF sy-subrc EQ 0.
        PO pending qty
          lv_pendi = it_po_pend-pendi.
        ELSE.
          CLEAR lv_pendi.
        ENDIF.
      Total qty on hand & PO qty pending
        lv_total_conf = lv_labst + lv_pendi.
      Now determine if a PO is required for the material concerned.
        IF lv_total_conf < lv_eisbe.
          it_sto-matnr = it_marc-matnr.
          it_sto-werks = it_marc-werks.
          it_sto-eisbe = lv_eisbe.
        it_sto-bstmi = lv_bstmi_old.
          it_sto-bstrf = lv_bstrf_old.
          it_sto-beskz = lv_beskz_old.
          it_sto-sobsl = lv_sobsl_old.
          it_sto-labst = lv_labst.
          it_sto-pendi = lv_pendi.
        Actual Qty Required
          lv_qty_req = lv_eisbe - lv_total_conf.
         IF it_marc-bstmi IS INITIAL.
           IF it_marc-bstrf IS INITIAL.
            it_sto-orqty = lv_qty_req.
          ELSE.
           lv_bstmi = it_marc-bstmi.
           lv_min_qty = it_marc-bstmi.
             lv_bstrf = it_marc-bstrf.
             lv_min_qty = it_marc-bstrf.
            DO.
              IF lv_qty_req <= lv_min_qty.
                lv_qty_req = lv_min_qty.
                it_sto-orqty = lv_qty_req.
                EXIT.
              ELSE.
               lv_min_qty = lv_min_qty + lv_bstmi.
                 lv_min_qty = lv_min_qty + lv_bstrf.
              ENDIF.
            ENDDO.
          ENDIF.
          APPEND it_sto.
          CLEAR  it_sto.
        ENDIF.
      ENDLOOP.
      SORT it_sto BY werks matnr.
    ENDFORM.                    " determine_mat_qty_required
    *&      Form  print_details
          text
    -->  p1        text
    <--  p2        text
    FORM print_details .
      LOOP AT it_sto.
        WRITE:/ it_sto-werks UNDER text-h01,
                it_sto-matnr UNDER text-h02,
                it_sto-orqty UNDER text-h03,
                it_sto-eisbe UNDER text-h04,
              it_sto-bstmi UNDER text-h05,
                it_sto-bstrf UNDER text-h05,
                it_sto-labst UNDER text-h06,
                it_sto-pendi UNDER text-h07.
      ENDLOOP.
    ENDFORM.                    " print_details
    *&      Form  print_header
          text
    -->  p1        text
    <--  p2        text
    FORM print_header .
      WRITE:  AT 001 text-h01,
                 015 text-h02,
               030 text-h03,
               050 text-h04,
               070 text-h05,
               090 text-h06,
               110 text-h07.
                 030 text-h03 RIGHT-JUSTIFIED,
                 050 text-h04 RIGHT-JUSTIFIED,
                 070 text-h05 RIGHT-JUSTIFIED,
                 090 text-h06 RIGHT-JUSTIFIED,
                 110 text-h07 RIGHT-JUSTIFIED.
      NEW-LINE.
    ENDFORM.                    " print_header
    *&      Form  create_po
          text
    -->  p1        text
    <--  p2        text
    FORM create_po .
    *-Document date with flag
      ws_poheader-doc_date             = sy-datum.
      ws_poheaderx-doc_date            = ws_flg.
    *-Document type with flag
      ws_poheader-doc_type             = 'Z3'(c01).
      ws_poheaderx-doc_type            = ws_flg.
    *-Purchasing group with Flag
      ws_poheader-pur_group            = '005'.   " hardcoded
      ws_poheaderx-pur_group           =  ws_flg.
    *-Purchasing Organization with flag
      ws_poheader-purch_org            = '2000'.
      ws_poheaderx-purch_org           = ws_flg.
    *-Supply plant with flag
      ws_poheader-suppl_plnt           = '2000'.
      ws_poheaderx-suppl_plnt          = ws_flg.
    *-Company Code with flag
      ws_poheader-comp_code            = '2000'.
      ws_poheaderx-comp_code           = ws_flg.
      LOOP AT it_sto.
        AT NEW werks.
          CLEAR  tbl_poitem.
          CLEAR  tbl_poitemx.
          CLEAR  tbl_return.
          CLEAR  tbl_posched.
          CLEAR  tbl_poschedx.
          REFRESH tbl_poitem.
          REFRESH tbl_poitemx.
          REFRESH tbl_return.
          REFRESH tbl_posched.
          REFRESH tbl_poschedx.
          CLEAR ws_posnr.
        ENDAT.
        ws_posnr = ws_posnr + 10.
      Item Data
        tbl_poitem-po_item                 = ws_posnr.
        tbl_poitem-material                = it_sto-matnr.
        tbl_poitem-item_cat                = 'U'(c02).
        tbl_poitem-plant                   = it_sto-werks.
        tbl_poitem-quantity                = it_sto-orqty.
        APPEND tbl_poitem.
        CLEAR  tbl_poitem.
      Item X Data
        tbl_poitemx-po_item                = ws_posnr.
        tbl_poitemx-po_itemx               = ws_flg.
        tbl_poitemx-material               = ws_flg.
        tbl_poitemx-plant                  = ws_flg.
        tbl_poitemx-item_cat               = ws_flg.
        tbl_poitemx-quantity               = ws_flg.
        APPEND tbl_poitemx.
        CLEAR  tbl_poitemx.
      Schedule Data
        tbl_posched-po_item = ws_posnr.
        tbl_posched-sched_line = '0001'.
        tbl_posched-delivery_date = sy-datum.
        tbl_posched-quantity = it_sto-orqty.
        APPEND tbl_posched.
        CLEAR  tbl_posched.
      Schedule Data X
        tbl_poschedx-po_item = ws_posnr.
        tbl_poschedx-po_itemx = ws_flg.
        tbl_poschedx-sched_line = '0001'.
        tbl_poschedx-sched_linex = ws_flg.
        tbl_poschedx-delivery_date = ws_flg.
        tbl_poschedx-quantity = ws_flg.
        APPEND tbl_poschedx.
        CLEAR  tbl_poschedx.
        AT END OF werks.
        Create the PO
          CALL FUNCTION 'BAPI_PO_CREATE1'
            EXPORTING
              poheader         = ws_poheader
              poheaderx        = ws_poheaderx
            IMPORTING
              exppurchaseorder = ws_purchaseorder
            TABLES
              return           = tbl_return
              poitem           = tbl_poitem
              poitemx          = tbl_poitemx
              poschedule       = tbl_posched
              poschedulex      = tbl_poschedx.
          LOOP AT tbl_return WHERE type EQ 'E' OR type EQ 'A'.
            EXIT.
          ENDLOOP.
        If Loop is false - then no error occurred
          IF sy-subrc NE 0.
          No Errors - Commit
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
              EXPORTING
                wait = 'X'.
          ENDIF.
          SKIP.
          LOOP AT tbl_return.
            FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
            IF tbl_return-type = 'E' OR tbl_return-type = 'A'.
              FORMAT COLOR COL_NEGATIVE INTENSIFIED OFF.
            ELSEIF tbl_return-type = 'W'.
              FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
            ELSE.
              FORMAT COLOR COL_POSITIVE ON.
            ENDIF.
            WRITE:/3 tbl_return-type,12 tbl_return-id,20(85)
    tbl_return-message,
                   86(10) tbl_return-field,95(20) tbl_return-system.
            FORMAT COLOR OFF.
          ENDLOOP.
        ENDAT.
      ENDLOOP.
    ENDFORM.                    " create_po

    Hi,
    first you can store these 2 dates into some internal table sat it_sobid  and it_ObjectID.Now
    sort  it_sobid ascending.
    loop at  it_ObjectID.
    Read date from  it_sobid  binary search index sy-index.
    it_ObjectID-date =  it_sobid-date.
    flag = 'y'.
    endloop.
    you can write some logic like this. Its just a rough idea you can modify according to ur need.
    Regards,
    Ravi

  • Issue with HDMI audio output

    Hello everyone,
    this is my first post in Arch Linux forum. I am a Newbie but have always managed to work things around with ArchWiki documentation, but I am having an issue I could not solve for some time now.
    My HDMI audio output was working fine, but stoped working about a month ago, maybe due to some update. I use the open source ATI driver (xf86-video-ati package), and enabled the kernel parameter radeon.audio=1, like it is documented.
    My graphics card is a Radeon HD 3650. I checked for the compatibility of the driver (http://www.x.org/wiki/RadeonFeature/#De … ting_names) and it seems to be ok.
    Do you have any suggestion to help me?
    Thank you in advance

    Andreaskem wrote:
    Output of "aplay -l"?
    Do you use pulseaudio? If so, what is the output of "pactl list"?
    Thank you for your reply
    Here is the output of aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    No, I do not use pulseaudio.
    Last edited by rud25 (2013-10-13 19:15:09)

  • Need Urgent Help to solve this scenario

    Java Application-------through LAN-------Machine A
    Java Application-------through LAN-------Machine B
    <ul><li>a. Machine B via XML Protocol</li>
    <li>i. Will send XML Commands (commands will be inputed and saved on real-time)</li>
    <li>ii. Will display the result of the issued command</li>
    <li>iii. Will fetch a file from NETMAN Machine, and dumped it to RAP Directory using XML Protocol</li>
    </ul>
    <ul><li>b. Machine A via Telnet</li>
    <li>i. Will send automated Telnet command (commands will be given real-time)</li>
    <li>ii. Should return response to the command</li>
    <li>iii. Fetch certain strings from NMS100 and dumped it to RAP Directory using Telnet</li>
    </ul>
    I have only this knowledge in this scenario and i need help on how to approach the problem statement.
    Please help with whatever you can
    Thanks in Advance.

    http://java.sun.com/docs/books/tutorial/networking/index.html
    http://www.google.co.uk/search?hl=en&q=java+telnet&btnG=Google+Search&meta=&aq=f&oq=

  • Need urgent Help for setting up iCal Server

    I will move the iCal portion here, maybe I will get some help.
    Okay first my setup:
    Two XServe with the latest 10.5 (one is the backup)
    Six Mac Pros with Leopard
    Three Macbook Pros with Snow Leopard
    All Macs are on an Windows 2003 Active Directory network. Also we have our accounts locally (on each workstation and laptop).
    *So I have installed the advanced settings for the Server OS.
    *Created a account for every user on the server
    *The FTP, Web (for the local webpage), Open Directory and iCal services are on. (iCal would only activate with Open Directory service??)
    *The iCal server destination (for the calendars) are on a separate drive with +Ignore Permissions+
    Still can not link a account through iCal with the server!
    Could somebody give me a walkthrough how to setup the iCal server?
    Oh yeah another issue I had I can't get the calendaring checkbox in the user account to stick! Is this just a bug?

    Hi Umesh,
    I would not use the repository on a database that was cloned. In my experience this leads to problems.
    A better way is to clone the database and then create a new repository on the clone:
    1. export the repository on the windows server to an mdl file
    2. unregister all target users on solaris
    3. drop the repository on solarais
    4. create a new repository on solaris
    5. Import the data from the mdl file you exported in step 1
    6. register target users
    7. configure and register the locations
    This way requires some manual work, but I do not see another way.
    Regards,
    Carsten.

  • Need urgent help -update customer account with out stock(Reserve Invoice)

    hi
    when we creating an invoice ,it will update both customer account and
    invetory account. i need only customer account. how can do with this function using oInvoice buisness object and oinvoices lines. i am using
    C#
    Thanks
    Edited by: sap_beginer on May 1, 2008 2:55 PM

    Its same as I wrote you in other thread, use service type of invoice as
    .DocType = SAPbobsCOM.BoDocumentTypes.dDocument_Service
    Petr

  • Need urgent help for (Message file sp1 lang .msb not found)

    sir
    c:\oracle9i this is my database folder name
    c:\oraform this is my form folder name
    which one my oracle_home name
    sir i test this command
    c:\ set ORACLE_HOME=c:\ORACLE9I
    c:\ set ORACLE_SID=AAMIR
    c:\ sqlplus / as sysdba
    AND RUN SQL PLUS THEN SYSTEM GIVE ME THIS ERROR
    incorrect environment variable plus_dflt program execution error
    please give me idea how i run my system
    thank

    Duplicate post:
    ''Urgent'' incorrect environment variable plus_dflt program execution erro

  • Need urgent help with Ifs1.1 on Solaris

    We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
    Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
    What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
    By the way:
    Where do I have to start CTX on the IFS- or the Oracle-Side?
    null

    Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
    Additionally it is strange, that we are still able to connect to the database via SqlPlus.
    IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
    maybe it can help?!
    Mon Dec 04 23:12:20 CET 2000
    Server STARTED: IfsAgents(19944) not managed
    Attempting to load agent EventExchangerAgent
    Agent EventExchangerAgent loaded
    Server STARTED: IfsProtocols(19945) not managed
    Attempting to start agent EventExchangerAgent
    EventExchangerAgent: Start request
    Agent EventExchangerAgent started
    Attempting to load agent ExpirationAgent
    Agent ExpirationAgent loaded
    EventExchangerAgent: starting timer
    Attempting to start agent ExpirationAgent
    ExpirationAgent: Start request
    Agent ExpirationAgent started
    Attempting to load agent GarbageCollectionAgent
    Agent GarbageCollectionAgent loaded
    ExpirationAgent: computed initial delay (in ms) is: 10024504
    ExpirationAgent: starting timer
    Attempting to start agent GarbageCollectionAgent
    GarbageCollectionAgent: Start request
    Agent GarbageCollectionAgent started
    Attempting to load agent ContentGarbageCollectionAgent
    Agent ContentGarbageCollectionAgent loaded
    GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
    GarbageCollectionAgent: starting timer
    Attempting to start agent ContentGarbageCollectionAgent
    ContentGarbageCollectionAgent: Start request
    Agent ContentGarbageCollectionAgent started
    Attempting to load agent DanglingObjectAVCleanupAgent
    Agent DanglingObjectAVCleanupAgent loaded
    ContentGarbageCollectionAgent: starting timer
    Attempting to start agent DanglingObjectAVCleanupAgent
    DanglingObjectAVCleanupAgent: Start request
    Agent DanglingObjectAVCleanupAgent started
    Attempting to load agent OutboxAgent
    Agent OutboxAgent loaded
    DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
    DanglingObjectAVCleanupAgent: starting timer
    Attempting to start agent OutboxAgent
    OutboxAgent: Start request
    Agent OutboxAgent started
    Attempting to load agent ServiceWatchdogAgent
    Agent ServiceWatchdogAgent loaded
    OutboxAgent: Done processing
    Attempting to start agent ServiceWatchdogAgent
    ServiceWatchdogAgent: Start request
    Agent ServiceWatchdogAgent started
    Attempting to load agent QuotaAgent
    Agent QuotaAgent loaded
    ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
    ServiceWatchdogAgent: starting timer
    Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    Attempting to start agent QuotaAgent
    QuotaAgent: Start request
    Agent QuotaAgent started
    QuotaAgent: starting timer
    Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
    ServiceWatchdogAgent: New Server being watchdogged
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server Detected in checkServer
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Unlocked Server being investigated
    ServiceWatchdogAgent: Freeing unlocked server 19687
    ServiceWatchdogAgent: Freeing unlocked server 19666
    Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
    ServiceWatchdogAgent: Freeing unlocked server 19723
    ServiceWatchdogAgent: Freeing unlocked server 19520
    Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
    Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
    ServiceWatchdogAgent: Freeing unlocked server 19519
    Server STOPPED: IfsAgents(19520) not managed
    ServiceWatchdogAgent: Freeing unlocked server 19712
    Server STOPPED: IfsProtocols(19519) not managed
    Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    ServiceWatchdogAgent: Freed Server removed from watchdog list
    QuotaAgent: Timer event: 0 active; 0 exceeded
    ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
    QuotaAgent: Timer event: 0 active; 0 exceeded
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException in checkForDeadServices():
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException in handle loop; continuing:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    ServiceWatchdogAgent: IfsException publishing timer details:
    ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
    oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
    java.sql.SQLException: ORA-03114: not connected to ORACLE
    null

  • I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated.   I've done transcoding but It downgrade to 480   I need urgent help.

    I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated.   I've done transcoding but It downgrade to 480   I need urgent help.

    Hi,
    first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
    first i edited my video in premier cc
    sequence 1280X720, 59,94 fps
    48000hz - stereo
    the i linked it with dynamik link to after, make some color correction, etc etc etc
    i renderd in quicktime animation
    my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
    i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

  • Need urgent help with HSDIO hardware timing

    Hi everyone,
    I need urgent help regarding HSDIO hardware timing. I've been working in a project which generating serial ramp using HSDIO pxie device. 
    I'm using clock rate 40MHz and generating 14 bit of boolean for each step of ramp. And I have to generate simply 256 steps ramp.
    Which means, 256 (steps) x 14 (boolean array) x 25 ns (period of 1 boolean value) = 89,6 ns.
    What I'm doing right now is with using index of FOR loop as my input data (converting the index into 14bit boolean), then write into pxie device in every iteration,
    which means, my data is getting into output in every 1ms time, right? (I'm using windows)
    And I want to be able to generate faster than that. 
    How can I prewrite my 256 steps ramp, then write them all at once into pxie device. I'm really stuck here.
    In the picture can you see how I do the write into device in every iteration of FOR Loop.
    Regards,
    Yan.

    hi, thanks for responding.
    with using example of dynamic generation with script, I can manage to generate the ramp with controllable delay (generate the whole waveform, including delay with script command, then write to the card).
    But I still have 1 question, I can test the output of the generation using oscilloscope and cant see the start delay (I'm writing delay at the start, before generating the ramp). My signal generated at 0 sec.
    How can I check this start delay? is there any good example delivered with Labview to check this generation? Somehow I cant use the "dynamic generation and acquisition" example to see my generation (cant figure out how to capture the generated signal).
    regards,
    Yan.

  • Need urgent help in listing out checklist from DBA prespective for BI Implementation Project

    Hello Guys,
    We are in Designing phase Data Modeling of PDW/APS Implementation Project.
    I need urgent help in making a checklist from a DBA perspective.
    Like what are things ill be needing at a time of implementation/Deployment.
    Your expert comments and help will be highly appreciated.
    Thank you,
    Anish.S
    Asandeen

    You can get good summary of checklist from this article about
    DBA checklist for data warehousing.
    Which highlights on below pointers:
    New system or old. (I.e. Up-gradation vs starting from scratch)
    Complexity of SQL Server architecture 
    SQL Server storage
    Determining SQL Server processing power
    SQL Server installation consideration 
    SQL Server configuration parameter
    SQL Server security
    SQL Server Database property
    SQL Server jobs and automation
    Protecting SQL Server data
    SQL Server health monitoring and check ups
    SQL Server ownership and control 
    based on my real time experience, I will suggest you to keep an eye on 
    Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
    System availability (Check for Windows update and up time configuration) 
    Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
    Source control mechanism 
    Disk space and memory usage
    You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
    Proper implementation of Landing , Staging and Mart tables.
    Column size (this can drastically decrease your database size)
    Usage of indexes (Index are good, but at what cost?)
    I hope this will assist you in building your check list.

Maybe you are looking for