Need Urgent Help in PM8M-V H problem - keyboard freeze

Hi everyone,
I'm a newbie in this forum and I really need urgent help with my motherboard.
My PC specification:
Intel Pentium 4 2.4GHz
MSI PM8M-V H W7104VMS v3.4 022206 14:32:17
1GB(512MB x 2) Kingston PC3200 400MHz
Seagate SATA II 320GB ST3320620SV (set with jumper to support SATA I)
Power Color ATI Radeon 9550 256MB
Lite-On DVDRW SHM-165P6S
USB mouse, PS/2 Keyboard
I really appreciate if anyone can help to guide me in solving my problem. My keyboard tends to freeze at the part where it says "Press any key to boot from CD". This limits me to do anything until I'm totally loaded into Windows. Thus, disable me to perform any formating and fresh installation of OS. However, the keyboards works fine at the begining of the POST and in BIOS. Is there any settings in BIOS that i should perform?.....
However, I realise in order to get through the foresaid message without the the keyboard freeze up is by keep on trying to boot up and shut down until it works (but only work once, then hv to try again), but this is not a solution as if what if I wanted to have 2 OS?... I cant use the keyboard to choose either of the OS installed. I have tried to change the RAM, change keyboard, use the build in VGA, or even remove the motherboard from the ATX casing - result: still have the same problem. What should I do??.. I have look around the forum for answers but there isnt any (I hope I didnt miss any). Is there any problem with my motherboard, or its BIOS, or any of the harware compatibility or etc..... what actually can I do?
I do not dare to perform any BIOS update Unnecessary (it seems that many have problems with BIOS problem in this forum) and moreover i think my BIOS is the most up-to-date. I cant find any new version in the net. Anyway I will check this topic frequently as possible to hope for any solution. What is the best solutions?
Thanks.

But the thing that makes me wonder is, my BIOS version is the latest but why this type of problem occurs??
What version of BIOS should I use?? Any recommendation ??
Thanks.

Similar Messages

Need urgent help on file download servlet problem in Internet Explore

I have trouble to make my download servlet work in Internet Explore. I have gone through all the previous postings and done some research on the internet, but still can't figure out the solution. 
I have a jsp page called "download.jsp" which contains a URL to download a file from the server, and I wrote a servlet (called DownloadServlet) to look up the corresponding file from the database based on the URL and write the file to the HTTP output to send it back to the browser. 
the URL in download.jsp is coded like <a href="/download/<%= currentDoc.doc_id %>/<%= currentDoc.name %>">on the browser, it will be sth like , the number 87 is my internal unique number for a file, and "myfile.doc" is the real document name. 
in my web.xml, "/download/" is mapped to DownloadServlet 
the downloadServlet.java looks like
tem_name = ... //read DB for file name
// set content type
if ( tmp_name.endsWith(".doc")) {
response.setContentType("application/msword");
else if ( tmp_name.endsWith(".pdf")){
response.setContentType("application/pdf");
else if ( tmp_name.endsWith(".ppt")){
response.setContentType("application/vnd.ms-powerpoint");
else if ( tmp_name.endsWith(".xls")){
response.setContentType("application/vnd.ms-excel");
else {
response.setContentType("application/download");
// set HTTP header
response.setHeader("Content-Disposition",
"attachment; filename=\""+tmp_name+"\"");
OutputStream os = response.getOutputStream();
//read local file and write back to browser
int i;
while ((i = is.read()) != -1) {
os.write (i);
os.flush();
Everything works fine in Netscape 7.0, when I click on the link, Netscape prompts me to choose "open using Word" or "save this file to disk". That's exactly the behavior I want. 
However in IE 5.50, the behavior is VERY STRANGE.
First, when I click on the URL, the popup window asks me to "open the file from its current location" or "save the file to disk". It also says "You have chosen to download a file from this location, ...(some url).. from localhost"
(1) If I choose "save the file to disk", it will save the rendered "download.jsp" (ie, the currect page with URL I just clicked, which isn't what I want).
(2)But if I choose "open the file from its current location", the 2nd popup window replaces the 1st, which also has the "Open ..." and "Save.." options, but it says "You have chosen to download a file from this location, MYFILE.doc from localhost". (notice it shows the correct file name now)
(3) If I choose "Save..." on the 2nd window, IE will save the correct file which is "myfile.doc"; if I choose "Open ...", a 3rd replaces the 2nd window, and they look the same, and when I choose "Open..." on the 3rd window, IE will use Word to open it.
any ideas?
</a>

Did you find a solution to this problem? I've been wrestling with the same issues for the past six months. Nothing I try seems to work. I've tried setting the contentLength(), inline vs. attachments, different write algorythms, etc. I don't get the suggestion to rename the servlet to a pdf file.

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sp

Need urgent help. I have been trying to resolve this problem to no avail. I am able to preview my sprymenu on my local browsers opera, google crome, and IE but when it is uploaded, the sprymenu squashes to the left hand side.

Please get your checkbook ready. (Only kidding.)
Have you ever done a hard factory reset of your Airport Express base? If not, then try it. Push down the reset button with a pen, then keep it depressed as you plug AX into the wall and keep holding it down until the green light blinks 4 times and then turns amber. Then let go. Unplug your broadband modem for a couple of minutes and shut down your Mac. First restart the modem, then the Mac. Use Airport Setup Assistant to set up a new network from scratch.
In System Prefs > Network > Show > Network Port Configurations drop n drag Airport to the top of the list and deselect all port configurations that you do not use.
That's a start.

BW error. Need urgent Help( I will give out full points).

We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.

Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time.

I need urgent help to remove unwanted adware from my iMac. Help!

I need urgent help to remove unwanted adware from my iMac. I have somehow got green underline in text ads, pop up ads that come in from the sides of the screen and ads that pop up selling similar products all over the page wherever I go. Its getting worse and I have researched and researched to no avail. I am really hestitant to download any software to remove whatever it is that is causing this problem. I have removed and reinstalled chrome. I have cleared Chrome and Safari cookies. Checked extensions, there are none to remove. I need to find an answer on how to get rid of these ads. Help please!

You installed the "DownLite" trojan, perhaps under a different name. Remove it as follows.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
/Library/Application Support/VSearch
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item named "VSearch" selected. Drag the selected item to the Trash. You may be prompted for your administrator login password.
Repeat with each of these lines:
/Library/LaunchAgents/com.vsearch.agent.plist
/Library/LaunchDaemons/com.vsearch.daemon.plist
/Library/LaunchDaemons/com.vsearch.helper.plist
/Library/LaunchDaemons/Jack.plist
/Library/PrivilegedHelperTools/Jack
/System/Library/Frameworks/VSearch.framework
Some of these items may be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including any that have the word "Spigot" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
This trojan is distributed on illegal websites that traffic in pirated movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect much worse to happen in the future.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the DownLite developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. It must be said that this failure of oversight is inexcusable and has seriously compromised the value of Gatekeeper and the Developer ID program. You cannot rely on Gatekeeper alone to protect you from harmful software.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Need urgent help on JAXB !!

I'm new to JAXB and in urgent need of help. Here's my problem.
I have a schema which has a child node "node1".
"node1" can occur once or multiple times.
My Input
Now, I receive an xml with 5 occurrences of "node1".
My Required Output
I need to create 5 xmls (same schema) with 1 occurrence of "node1".
Please help me with solution(s).
Thanks a ton in advance
:)

Also you can ask at Java Technology & XML forum:
http://forum.java.sun.com/forum.jspa?forumID=34

Need urgently help for OBIEE Installation (11g)

Hi all,
I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
The log under the Inventory directory shows me only following:
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
I need urgently help. I would appreciate someone could help me.
We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
I hope to find the help I need. I am desperated :-(

Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
Thanks,
JD

I am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help

i am new to mac air. Today i installed (unsuccessfully!) MAPLE16 on my mac book air. Now since it does not work properly (it also does not appear in applications) i decide to delete it. I could not remove it from launchpad . i need urgent help from your side.

Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmyrmac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button.
You generally have to reboot in order to complete an uninstallation.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
You may be advised by others to try to remove complex system modifications by hunting for files by name, or by running "utilities" that purport to remove software. I don't give such advice. Those tactics often will not work and maymake the problem worse.

Switch until release using keyboard...need urgent help

Hi,
i have a problem of configuring "switch until release" action using keyboard....
or is it there no this function at all...
it seems like all i can do is press to ON and press again to OFF
anyone can help...
need Urgent help....
thank you in advance..

This isn't possible because of the way operating systems
handle keyboard events. When you press a keyboard key, it does not register as
one key down. For whatever your operating system is set for as far as repeating
characters, it will register that many key down presses. The mouse works
differently, when you press the mouse it keeps that event "locked"
until you release the mouse. Because of this, you can not make a switch until
release using the keyboard; this definition is only for mouse clicks.
Brandon Vasquez | Software Engineer | Integration Services | National Instruments

Need Urgent Help: Solaris fails to come up after applying patch 120012-14

Hello All,
I really need urgent help , as I am in really big problem. Today I applied patches , the last patch I applied was 120012-14.
After this I rebooted Solaris and it is not coming up now. It is giving me following error, it reboots again and again
nel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/hook: undefined symbol 'netstack_unregister'
WARNING: mod_load: cannot load module 'hook'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_register'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_register'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_add'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_family_remove'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_unregister'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_find_by_stackid'
/kernel/misc/sparcv9/neti: undefined symbol 'hook_event_add'
/kernel/misc/sparcv9/neti: undefined symbol 'netstack_rele'
WARNING: mod_load: cannot load module 'neti'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: neti: unable to resolve dependency, module 'misc/hook' not found
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_event'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_register'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip_config'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_impl'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_delete_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'secpolicy_ip'
/kernel/drv/sparcv9/ip: undefined symbol 'hook_run'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_cred'
/kernel/drv/sparcv9/ip: undefined symbol 'netstackid_to_zoneid'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_event'
/kernel/drv/sparcv9/ip: undefined symbol 'net_unregister_family'
/kernel/drv/sparcv9/ip: undefined symbol 'kstat_create_netstack'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_find_by_stackid'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_rele'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_hold'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next'
/kernel/drv/sparcv9/ip: undefined symbol 'net_register_family'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_init'
/kernel/drv/sparcv9/ip: undefined symbol 'netstack_next_fini'
WARNING: mod_load: cannot load module 'ip'
WARNING: ip: unable to resolve dependency, module 'misc/hook' not found
strplumb: can't install module drv/ip, err -1
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'cons_tem_disable'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_inverses'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'consmode'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_hide_cursor'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_pos'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_term_font_size'
/kernel/dacf/sparcv9/consconfig_dacf: undefined symbol 'prom_get_tem_size'
WARNING: mod_load: cannot load module 'consconfig_dacf'
/kernel/misc/sparcv9/consconfig: undefined symbol 'dynamic_console_config'
WARNING: mod_load: cannot load module 'consconfig'
WARNING: consconfig: unable to resolve dependency, module 'dacf/consconfig_dacf' not found
panic[cpu3]/thread=180e000: mod_hold_stub: Couldn't load stub module misc/consconfig
000000000180b890 genunix:mod_hold_stub+1f0 (0, 185fc00, 18acbf8, 60002cff370, 1817328, 0)
%l0-3: 0000000001843b18 0000060003308000 0000000001811ce8 0000000000000000
%l4-7: 0000000000000000 0000000000000064 ffffffffffffffff 0000000000000000
000000000180b940 unix:stubs_common_code+30 (1f037ce7fb0, e164, 64000000, 0, 1ef800, 0)
%l0-3: 000000000180b209 000000000180b2e1 000000337e000000 0000000000000001
%l4-7: 0000000000000000 0000000001817338 0000000000000000 0000060002ccf6c0
000000000180ba10 genunix:main+134 (18ad050, 18a8c00, 1836500, 1861800, 183b400, 1814000)
%l0-3: 0000000070002000 0000000000000001 0000000000000000 0000000000000002
%l4-7: 00000000018b0280 00000000018b0000 00000000018ad060 00000000018ad000
syncing file systems... done
skipping system dump - no dump device configured
rebooting...
Please help me what should I do. I have gone through all forums and mailing lists but couldnt find pin point solution.
Thanks,
Farhan
Edited by: rozzx on Jul 5, 2008 1:48 AM

Solve this. Patch just screwed the meta devices, changed vfstab in single user mod and it booted fine.

Need Urgent Help. ORA-12500 with no reason

I need urgent help.
I have 8.1.7.2.1 on Win2K.
I get ORA-12500 error when trying to connect oracle instance. This problem begin to arise only when number of sessions reach a number about 200. At the same time there is no definite boundary for it. Once it happened when there were 216 session, then 196, then 206.
There rarely (1/100) I get ORA-12514 and after again ORA-12500. Once I got ORA-12600.
What it might be you think? It can't be a problem in listener.ora or in tnsnames.ora because it works fine if number of sessions is about 100. It tried to restart tnslistener (from lsnrctl and the service) and restarted database (but not the service). I did it different in sequences, but didn't help. What should I do? Is it a known bug?

I need urgent help.
I have 8.1.7.2.1 on Win2K.
I get ORA-12500 error when trying to connect oracle instance. This problem begin to arise only when number of sessions reach a number about 200. At the same time there is no definite boundary for it. Once it happened when there were 216 session, then 196, then 206.
There rarely (1/100) I get ORA-12514 and after again ORA-12500. Once I got ORA-12600.
What it might be you think? It can't be a problem in listener.ora or in tnsnames.ora because it works fine if number of sessions is about 100. It tried to restart tnslistener (from lsnrctl and the service) and restarted database (but not the service). I did it different in sequences, but didn't help. What should I do? Is it a known bug? bash-2.03$ oerr ora 12500
12500, 00000, "TNS:listener failed to start a dedicated server process"
// *Cause: The process of starting up a dedicated server process failed.
// The executable could not be found or the environment may be set up
// incorrectly.
// *Action: Turn on tracing at the ADMIN level and reexecute the operation.
// Verify that the ORACLE Server executable is present and has execute
// permissions enabled. Ensure that the ORACLE environment is specified
// correctly in LISTENER.ORA. The Oracle Protocol Adapter that is being
// called may not be installed on the local hard drive. Please check that
// the correct Protocol Adapter are successfully linked.
// If error persists, contact Oracle Customer Support.
There is not enough info to go on but the problem seems to be either in the listener.ora
or tnsnames.ora. Did you make any changes before this started occurring?
William

Iphone 5 changes time randomly.. need urgent help!!

hi everybody .. i need urgent help to fix the problem of my iphone 5 ( IOS 7, Vodafone Germany) .. 2 weeks ago i noticed that the time on iphone was completely wrong and not related even to other time zones .. sometimes it freezed at the same minute for 1 hour .. sometimes it ran anticlockwise.. i switched off the automatic time setting..i made reset and erased all contents and reloaded all configuration from iCloud..the same problem.. i registered it as new iPhone .. no improvement... i switched off the WIFI..3G...i made reset using iTunes .. same error. same error... i took it to Apple store in Dresden- Germany and demostrated the problem there .. they told me that the problem beyond their knowledge and i have to contact apple support ... i sent the iPhone to Apple support in Netherland ... they sent it back on the next day coz they were not able to reproduce the problem...after regestering the iPhone again with my ID.. the same problem ... it's catastrophic coz many functions are time dependent (imessege, Calender, Email, etc.. )..and i cannot rely on my iPhone anymore... has anybody encountered the same problem in germany... and what is the solution?

If the phone is failing to charge, then there are three possibilities -
1) The charging cable is defective - does it work with anything else?
2) The power source is defective - unlikely since you have tried different ones with same result.
3) The phone has a hardware failure - which means you need to take to an Apple store or call them up for advice.

Need urgent help with Ifs1.1 on Solaris

We have installed IFS 1.1 with Oracle 8.1.7 on a three tier System (two Suns). We use JWS as WebServer. When we start IFS and JWS everything seems to work fine. But after some time (irregulary) we are not able to contact the JSP-Sites via a bowser. After restarting JWS, everything works fine for some time.
Sometimes it happens (about one times a day), that the whole JWS crashes (JWS-Admin doesn't work). So we have to restart the whole IFS.
What can be the problem? We need urgent help, because the deadline for our project is Wednesday.
By the way:
Where do I have to start CTX on the IFS- or the Oracle-Side?
null

Yes, we tried the Oracle HTTP - Server, but we weren4t able to get it to work. We didn4t get our JSP-Files to work with it. But that is another issue. I think it4s not a problem of JWS, but IFS.
Additionally it is strange, that we are still able to connect to the database via SqlPlus.
IFS works fine for about 15 minutes, than it crashes, nothing works anymore. We found following errors in the IfsAgents.log:
maybe it can help?!
Mon Dec 04 23:12:20 CET 2000
Server STARTED: IfsAgents(19944) not managed
Attempting to load agent EventExchangerAgent
Agent EventExchangerAgent loaded
Server STARTED: IfsProtocols(19945) not managed
Attempting to start agent EventExchangerAgent
EventExchangerAgent: Start request
Agent EventExchangerAgent started
Attempting to load agent ExpirationAgent
Agent ExpirationAgent loaded
EventExchangerAgent: starting timer
Attempting to start agent ExpirationAgent
ExpirationAgent: Start request
Agent ExpirationAgent started
Attempting to load agent GarbageCollectionAgent
Agent GarbageCollectionAgent loaded
ExpirationAgent: computed initial delay (in ms) is: 10024504
ExpirationAgent: starting timer
Attempting to start agent GarbageCollectionAgent
GarbageCollectionAgent: Start request
Agent GarbageCollectionAgent started
Attempting to load agent ContentGarbageCollectionAgent
Agent ContentGarbageCollectionAgent loaded
GarbageCollectionAgent: computed initial delay (in ms) is: 11816890
GarbageCollectionAgent: starting timer
Attempting to start agent ContentGarbageCollectionAgent
ContentGarbageCollectionAgent: Start request
Agent ContentGarbageCollectionAgent started
Attempting to load agent DanglingObjectAVCleanupAgent
Agent DanglingObjectAVCleanupAgent loaded
ContentGarbageCollectionAgent: starting timer
Attempting to start agent DanglingObjectAVCleanupAgent
DanglingObjectAVCleanupAgent: Start request
Agent DanglingObjectAVCleanupAgent started
Attempting to load agent OutboxAgent
Agent OutboxAgent loaded
DanglingObjectAVCleanupAgent: computed initial delay (in ms) is: 5500105
DanglingObjectAVCleanupAgent: starting timer
Attempting to start agent OutboxAgent
OutboxAgent: Start request
Agent OutboxAgent started
Attempting to load agent ServiceWatchdogAgent
Agent ServiceWatchdogAgent loaded
OutboxAgent: Done processing
Attempting to start agent ServiceWatchdogAgent
ServiceWatchdogAgent: Start request
Agent ServiceWatchdogAgent started
Attempting to load agent QuotaAgent
Agent QuotaAgent loaded
ServiceWatchdogAgent: Initializing ServerWatchdogTable with 9 entries
ServiceWatchdogAgent: starting timer
Server STARTED: FtpServer(20082) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Attempting to start agent QuotaAgent
QuotaAgent: Start request
Agent QuotaAgent started
QuotaAgent: starting timer
Server STARTED: CupServer(20124) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: ImapServer(20130) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
Server STARTED: SmtpServer(20150) managed by IfsProtocols(19945)
ServiceWatchdogAgent: New Server being watchdogged
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server Detected in checkServer
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Unlocked Server being investigated
ServiceWatchdogAgent: Freeing unlocked server 19687
ServiceWatchdogAgent: Freeing unlocked server 19666
Server STOPPED: CupServer(19687) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19723
ServiceWatchdogAgent: Freeing unlocked server 19520
Server STOPPED: FtpServer(19666) managed by IfsProtocols(19519)
Server STOPPED: SmtpServer(19723) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freeing unlocked server 19519
Server STOPPED: IfsAgents(19520) not managed
ServiceWatchdogAgent: Freeing unlocked server 19712
Server STOPPED: IfsProtocols(19519) not managed
Server STOPPED: ImapServer(19712) managed by IfsProtocols(19519)
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
ServiceWatchdogAgent: Freed Server removed from watchdog list
QuotaAgent: Timer event: 0 active; 0 exceeded
ContentGarbageCollectionAgent: Freed 5 unreferenced ContentObjects
QuotaAgent: Timer event: 0 active; 0 exceeded
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-11012: Unable to get events from other services
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in checkForDeadServices():
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException in handle loop; continuing:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
ServiceWatchdogAgent: IfsException publishing timer details:
ServiceWatchdogAgent: oracle.ifs.common.IfsException: IFS-10651: Unable to begin transaction
oracle.ifs.common.IfsException: IFS-10603: Unable to set database savepoint
java.sql.SQLException: ORA-03114: not connected to ORACLE
null

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

Need urgent help!!!! (combine prompt and formula)

Hi,
I am using Oracle Business Intelligence 10.1.3.3.2, and creating some reports from answers. I desperately need to combine
prompt and formula on some column.
I need to use prompt in my formula on some column.
Need urgent help !

You can use the presentation variables to pass the value of the prompt into the report or any column formula.
In the dashboard prompt you see an option called "Set Variable" where and you need to give a name to the variable.(Say Var_value)
Now the value of the variable can be simply referenced using the syntax @{var_name}{10}. Here '10' being the defualt value which is optional you can simply reference using @{var_name} and you have the value of the prompts passed.
Hope it works
Thanks
Prash

Need Urgent Help in PM8M-V H problem - keyboard freeze

Similar Messages

Maybe you are looking for