Need urgent help on dynamic internal table.
Hi experts,
I got an editable dynamic internal table. When the value in 1 of the editable field has been changed, I will fire the the DATA_CHANGED event. In this event, I can get the row ID where the changes occur, but the problem is, how can I select back the data from the dynamic internal table using the row ID since index is not permitted to be used? I need to get the rest of the records form the ROW and then perform a database update accordingly. How can I select from the dynamic internal table given the row ID? THanks in advance.
Hi
I suppose it depends on the kind of internal table assigned to fieldsymbol, this sample works fine:
FIELD-SYMBOLS: <FS> TYPE TABLE,
<WA> TYPE ANY.
DATA: BEGIN OF ITAB OCCURS 0,
FIELD,
END OF ITAB.
DO 10 TIMES.
ITAB-FIELD = 'a'.
APPEND ITAB.
ENDDO.
ASSIGN ITAB[] TO <FS>.
READ TABLE <FS> ASSIGNING <WA> INDEX 1.
WRITE <WA>.
It can't use the index with internal table of kind HASHED.
Max
Similar Messages
-
Need urgent help on dynamic download of applets in smart card
hi
Can anyone help me on dynamic download of applets onto smartcard using javacard kit.
I need to know : 1. how much memory it requires?
2. how fast it is?
3. the limitations?
Regards
BharathHi Joseph,
I wanted to know the minimum memory requirements / constraints (if any). The size of the smallest capplet I have is around 10K . I dont want any extra features on the install method as of now. I am still not clear how to take up the scriptgen path of dynamic applet downloading. Can you please elaborate some initial steps to start with? I have already gone through the JCDK users guide, HC12 users guide and CW manuals. I have also successfully flashed and tested JCDK on HC12 for maskgen path.
Regards
Bharath -
Need information on Dynamic internal table
Hi All,
I need some information on dynamic internal table.
I want what are the field names and the values in dynamic internal table.
Is there any function module, which tells us the field names and values of corresponding fields from a dynamic internal table ?
Thank you very much in advance.Hi,
Program to display/edit database tables dynamically.
REPORT zdyn_table_display.
PARAMETERS: p_table TYPE tabname OBLIGATORY,
p_rows TYPE I.
* Creation of dynamic internal table
DATA: lv_dref TYPE REF TO data.
FIELD-SYMBOLS: <fs_table> TYPE STANDARD TABLE.
DATA: lv_table TYPE string.
START-OF-SELECTION.
* Dynamic internal table.
CREATE DATA lv_dref TYPE TABLE OF (p_table).
ASSIGN lv_dref->* TO <fs_table>.
IF sy-subrc EQ 0.
* EXIT.
ENDIF.
data i type i.
* Get the data
SELECT *
FROM (p_table)
UP TO p_rows ROWS
INTO TABLE <fs_table>.
CONCATENATE 'Table contents : ' p_table INTO lv_table.
* display the table control.
CALL FUNCTION 'STC1_FULLSCREEN_TABLE_CONTROL'
EXPORTING
header = lv_table
tabname = p_table
no_button = space
TABLES
table = <fs_table>
EXCEPTIONS
no_more_tables = 1
too_many_fields = 2
nametab_not_valid = 3
handle_not_valid = 4
OTHERS = 5.
IF sy-subrc EQ 0.
EXIT.
ENDIF.
Getting internal table definition
Try this...
DATA : l_descr_ref TYPE REF TO cl_abap_structdescr.
l_descr_ref ?= cl_abap_typedescr=>describe_by_data( itab ).
Now l_descr_ref->components holds the entire list of fields in itab.
Thanks & Regards,
ShreeMohan -
How to do parallel processing with dynamic internal table
Hi All,
I need to implement parallel processing that involves dynamically created internal tables. I tried doing so using RFC function modules (using starting new task and other such methods) but didn't get success this requires RFC enabled function modules and at the same time RFC enabled function modules do not allow generic data type (STANDARD TABLE) which is needed for passing dynamic internal tables. My exact requirement is as follows:
1. I've large chunk of data in two internal tables, one of them is formed dynamically and hence it's structure is not known at the time of coding.
2. This data has to be processed together to generate another internal table, whose structure is pre-defined. But this data processing is taking very long time as the number of records are close to a million.
3. I need to divide the dynamic internal table into (say) 1000 records each and pass to a function module and submit it to run in another task. Many such tasks will be executed in parallel.
4. The function module running in parallel can insert the processed data into a database table and the main program can access it from there.
Unfortunately, due to the limitation of not allowing generic data types in RFC, I'm unable to do this. Does anyone has any idea how to implement parallel processing using dynamic internal tables in these type of conditions.
Any help will be highly appreciated.
Thanks and regards,
Ashintry the below code...
DATA: w_subrc TYPE sy-subrc.
DATA: w_infty(5) TYPE c.
data: w_string type string.
FIELD-SYMBOLS: <f1> TYPE table.
FIELD-SYMBOLS: <f1_wa> TYPE ANY.
DATA: ref_tab TYPE REF TO data.
CONCATENATE 'P' infty INTO w_infty.
CREATE DATA ref_tab TYPE STANDARD TABLE OF (w_infty).
ASSIGN ref_tab->* TO <f1>.
* Create dynamic work area
CREATE DATA ref_tab TYPE (w_infty).
ASSIGN ref_tab->* TO <f1_wa>.
IF begda IS INITIAL.
begda = '18000101'.
ENDIF.
IF endda IS INITIAL.
endda = '99991231'.
ENDIF.
CALL FUNCTION 'HR_READ_INFOTYPE'
EXPORTING
pernr = pernr
infty = infty
begda = '18000101'
endda = '99991231'
IMPORTING
subrc = w_subrc
TABLES
infty_tab = <f1>
EXCEPTIONS
infty_not_found = 1
OTHERS = 2.
IF sy-subrc <> 0.
subrc = w_subrc.
ELSE.
ENDIF. -
Dynamic internal table with repeated structure
Hi,
I have a requirement, in which I need to create a dynamic internal table with the below structure.
Dynamic Int. table structure: fld1 and fld2.
If another internal table (say int2), contains 3 records, then my final output table should contain the below structure.
Value 1 Value 2 Value3
fld1 fld2 fld1 fld2 fld1 fld2
If in case, the int2 table contains 10 records, then my final output table should contain the structure below.
Value 1 Value 2 ..... Value10
fld1 fld2 fld1 fld2 ..... fld1 fld2
Please advice on how to acquire this. Thanks in advance for your help.
Regards,
Swetha.You can do it...but it won't be table... it would be some thing like
itab
ref1-> strycture (field 1 field 2 field 3)
ref2-> structure (field1 field 4 )
ref3-> structure (field5 field7 )
say Define a internal table with a single field to hold a reference of Data
Go on creating Rows of different structures and storing the address into the table... you can use RTTS for same
Use the below link for RTTS (search on wiki for examples).
http://wiki.sdn.sap.com/wiki/display/ABAP/RuntimeTypeServices+%28RTTS%29 -
Passing the Dynamic Internal Table as the Output Parameter of the FM...
Hi,
How can we pass the internal table as the output from the Function Module TABLES parameter.
SELECT * FROM TVRO BYPASSING BUFFER INTO TABLE <ltable>.
Now I need to pass the dynamic internal table <ltable> as the output in the function module.
Thanks!
Puneet.I can't use TVRO as the table type. The Table name is as the Input. This program will download the contents of the table and create an app server file. It can be for any database table.
so i want the output of this FM should be the data from that table. So what should be the TABLE type.
like in a program i will use:::
FIELD-SYMBOLS: <ltable> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
SELECT * FROM (p_table) BYPASSING BUFFER INTO TABLE <ltable>.
That is my requirement. -
Hi all,
I have created 2 tabstrip screns which contain ALV GRID DISPLAY in a container with dynamic internal table and editable columns .I want to capture the edited value from this ALV GRID display.I have used SET_TABLE_FOR_DISPLAY and for this dynamc internal table is passed which is Field symbol and editable columns have to be captured for further updation into another ztable.
When i used check_changed_data i am getting dump as field symbol not assigned.
Below is the code : How can i get edited column value from below code
call method alv_list->set_table_for_first_display
exporting
is_layout = gs_layout
changing
it_outtab = <fs_dynamic_table>
it_fieldcatalog = it_fieldcat[]
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4.
if sy-subrc <> 0.
* Implement suitable error handling here
endif.
Kindly help me to solve this.
With Thanks,
Dina.please provide more info about the dump to try to help you
as max said, it could be because the field symbol is not global and if its global maybe you are not refering well to the column
i assume that you are using "ASSIGN COMPONENT comp OF STRUCTURE struc TO <fs>" to capture the value changed
validate always the sy-subrc after the assignment.
but the check changed data have parameters that have the old and new values
please provide more info...
Regards -
Need ALV LIST for displaying Dynamic Internal Tables
Hi Guys,
I have some thing like 2 Dynamic internal tables.
Say 1st Internal table will be filled based on some condition.
say 2nd table will be filled based on some condition.
When appending the 1st Internal table, if that internal table is filled it creates another internal table of same kind and continues so on until some condition.
In the same way when appending the 2nd Internal table, if that internal table is filled it creates another internal table of same kind and continues so on until some condition.
My requirement is I need to display all these Internal tables in the output.
The output should look something like
1st Internal Table
some gap
2nd Internal Table
some gap
so on...................
Is there any standard ALV List, to display all these Internal Tables in such a way.
Thanks,
Prasad.Hi.
One thing more here is code which get 10 records from 2 tables and then show them in ALV.
first when u execute it will show data from ist table.
when u go back (F3) then it will sow data from 2nd table.
But if u want to show both ALV on the same screen then u will have to use screen programin and using class u will have to create container and then have to do it.
But as i above mentioned. that sample code is as below.
REPORT ztn_test LINE-COUNT 100.
data: itab_ref type ref to data.
data: hstr type lvc_title.
data: tabname like DD02T-TABNAME.
tabname = 'MARA'. " First Table
create data itab_ref type standard table of (tabname).
field-symbols: <itab> type standard table.
assign itab_ref->* to <itab>.
select * UP TO 10 ROWS from (tabname) into corresponding fields of table <itab>.
perform showalv.
tabname = 'KNA1'. " 2nd Table
create data itab_ref type standard table of (tabname).
"field-symbols: <itab> type standard table.
assign itab_ref->* to <itab>.
select * UP TO 10 ROWS from (tabname) into corresponding fields of table <itab>.
perform showalv.
form showalv.
" to show that data in alv
type-pools: slis.
data: myalv type ref to cl_gui_alv_grid, "ALV Grid
fieldcat type slis_t_fieldcat_alv, "Field Catalog Table
ls_fcat type slis_fieldcat_alv, "Line of Field catalog.
ls_heading type slis_listheader, "Line of Heading.
layout type slis_layout_alv, "layout of ALV for Heading and Logo.
event type slis_t_event, "Event Raising to Display Heading.
event_str type slis_alv_event. "Event String.
type-pools: slis.
data: heading type slis_t_listheader. "List Heading.
if heading[] is initial.
ls_heading-typ = 'H'.
ls_heading-info = 'HR: Master Data Change History'.
append ls_heading to heading.
endif.
* ls_heading-typ = 'A'.
* ls_heading-info = ''.
* APPEND ls_heading TO heading.
* ALV DISPLAY *
*******Making Layout of ALV
layout-zebra = 'X'.
layout-colwidth_optimize = 'X'.
*Calling function to raise event to display heading and icon above ALV
call function 'REUSE_ALV_EVENTS_GET'
exporting
i_list_type = 0
importing
et_events = event[]
* EXCEPTIONS
* LIST_TYPE_WRONG = 1
* OTHERS = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
******calling TOP_OF_PAGE Event
read table event with key name = 'TOP_OF_PAGE' into event_str.
if sy-subrc = 0.
move: 'TOP_OF_PAGE' to event_str-form.
modify event from event_str index sy-tabix.
endif.
**** Now use this Fuction to display ALV without any Screen Programming.
call function 'REUSE_ALV_GRID_DISPLAY'
exporting
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
i_callback_program = 'SAPLZFSL_HR_UTILS' "sy-cprog
* I_CALLBACK_PF_STATUS_SET = ' '
* I_CALLBACK_USER_COMMAND = ' '
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
i_structure_name = tabname
* I_BACKGROUND_ID = ' '
i_grid_title = hstr "Heading of ALV Grid.
* I_GRID_SETTINGS =
is_layout = layout
* it_fieldcat = fieldcat[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
i_default = 'X'
i_save = 'X'
* IS_VARIANT =
it_events = event[]
* IT_EVENT_EXIT =
* IS_PRINT =
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
tables
t_outtab = <itab>
* EXCEPTIONS
* PROGRAM_ERROR = 1
* OTHERS = 2
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endform. -
How to delete records from dynamic internal table.
Hi Experts,
Need urgent help!!!
Issue is with Dynamic internal tables.
Below is code written by me :
FORM select_query USING Lw_tabnam
TYPE t682i-kotabnr.
DATA : lw_line TYPE REF TO data,
lw_line1 TYPE REF TO data.
CREATE DATA Lw_line TYPE (lw_TABNAM).
ASSIGN Lw_line->* TO <WA_tbl>.
CREATE DATA LW_LINE TYPE STANDARD TABLE OF (Lw_tabnam)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN Lw_line->* TO <TBL>.
SELECT * FROM (Lw_tabnam)
INTO CORRESPONDING FIELDS OF TABLE <TBL>
WHERE (t_keys).
Endform.
code is working fine.
here even the table name and where condition are dynamic,everything is fine upto this point.
Now i have to delete some record from <TBL> based on some conditons.
for ex : ( here lc_fieldname is KUNNR)
loop at t_kunnr.
lw_tabix = sy-tabix.
Read table <tbl>
with key (lc_fieldname) = t_kunnr-kunnr ASSIGNING <wa_tbl>.
If sy-subrc = 0.
*Delete
delete <tbl> from <wa_tbl>
delete <tbl> index lw_tabix.
Endif.
Endloop.
The above delete statement doesn't work ,even we can't use index as it gives a syntax error " something related to "index is not allowed in standard table or hash table.
Can you help me ab't how to delete records in Dynamic internal table?
Other option that i am thinking of is to create a static table of type dynamic table.
means, data itab type standard table of <tbl> .I know the syntax is wrong ,however is there any way to do this?
Thanks in advance ,
If you have any suggestion ab't this then do let me know.
bye,
Gaurav.Hi
I wrote this code and it works fine:
DATA LW_TABNAM(10) VALUE 'LFA1'.
DATA : LW_LINES TYPE REF TO DATA,
LW_LINE TYPE REF TO DATA.
FIELD-SYMBOLS: <TABLE> TYPE TABLE,
<WA> TYPE ANY.
CREATE DATA LW_LINES TYPE TABLE OF (LW_TABNAM)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN LW_LINES->* TO <TABLE>.
CREATE DATA LW_LINE TYPE (LW_TABNAM).
ASSIGN LW_LINE->* TO <WA>.
DO 10 TIMES.
APPEND INITIAL LINE TO <TABLE>.
ENDDO.
SY-TABIX = 4.
DELETE <TABLE> INDEX SY-TABIX.
WRITE SY-SUBRC.
I hope it help you
Max -
How to populate data in dynamic internal table
Hi Expert,
fyi. My dynamic internal table field is created base on data selected. Eg. select table qpcd has 5 records. These 5 recods will become fieldname to my dynamic internal table. My dynamic internal table will be
...itab
01
02
03
04
05
The 5 records from qpcd is populated in another table call viqmel. I need to find the occurance of each code in viqmel and populate the number of occurance in itab in each of column. The final dynamic itab will be like this
table itab
01 02 03 04 05 -
> field name
2 0 1 0 1 -
> data
my source code like below
Report ZPLYGRND2.
TABLES: mara, makt.
TYPE-POOLS: slis, sydes.
DATA:it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
types : begin of t_qpcd,
codegruppe like qpcd-codegruppe,
code like qpcd-code,
end of t_qpcd.
data:wa_qpcd type t_qpcd,
i_qpcd type standard table of t_qpcd initial size 0.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
select * into corresponding fields of wa_qpcd from qpcd
where katalogart = 'D'
and codegruppe = 'OOT01'.
append wa_qpcd to i_qpcd.
endselect.
loop at i_qpcd into wa_qpcd.
is_fcat-fieldname = wa_qpcd-code.
APPEND is_fcat TO it_fcat.
endloop.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
if sy-subrc = 0.
endif.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
LOOP AT <l_table> INTO <l_line>.
ENDLOOP.hello dear i m giving u a code in this a dynamic table is made on the basis of table in database , and u can download this data correct it , see it, or even change it....and upload in tht table help full if u dont know the table name...in advance.
also the code to populate data in dynamic table is in this code like:
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
look at the whole program .hope this solve ur problem thanks.
REPORT ZTESTA MESSAGE-ID ZIMM .
TYPES : DATA_OBJECT TYPE REF TO DATA.
DATA : MITAB TYPE REF TO DATA .
TYPE-POOLS : SLIS .
DATA : IT_FIELDCAT TYPE STANDARD TABLE OF SLIS_FIELDCAT_ALV
WITH HEADER LINE .
DATA : IT_FIELDCATALOG TYPE LVC_T_FCAT .
DATA : WA_FIELDCATALOG TYPE LVC_S_FCAT .
DATA : I_STRUCTURE_NAME LIKE DD02L-TABNAME .
DATA : I_CALLBACK_PROGRAM LIKE SY-REPID .
DATA : DYN_LINE TYPE DATA_OBJECT .
FIELD-SYMBOLS : <FS_ITAB> TYPE STANDARD TABLE .
DATA : TABLE_NAME_IS_VALID TYPE C .
DATA : DYNAMIC_IT_INSTANTIATED TYPE C .
CONSTANTS BUTTONSELECTED TYPE C VALUE 'X' .
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_TABL.
PARAMETERS : MTABLE_N LIKE RSRD1-TBMA_VAL
MATCHCODE OBJECT DD_DBTB_16 OBLIGATORY .
DATA CHECKTABLED.
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_FILE.
PARAMETERS : MFILENAM LIKE RLGRAP-FILENAME .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_DOWN.
PARAMETERS : P_DOWNLD RADIOBUTTON GROUP GRP1
USER-COMMAND M_UCOMM .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_CHKF.
PARAMETERS : P_CHKFIL RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_UPLD.
PARAMETERS : P_UPLOAD RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(29) T_SHOW.
PARAMETERS : P_SHOW_T RADIOBUTTON GROUP GRP1 .
SELECTION-SCREEN END OF LINE.
AT SELECTION-SCREEN OUTPUT .
PERFORM CHECK_FILENAME .
AT SELECTION-SCREEN.
IF SY-UCOMM = 'ONLI'.
CHECKTABLED = MTABLE_N+0(1).
IF CHECKTABLED NE 'Z'.
MESSAGE I017.
LEAVE TO SCREEN 1000.
ENDIF.
IF SY-UNAME NE 'KAMESH.K'.
MESSAGE I023 WITH SY-UNAME.
LEAVE TO SCREEN 1000.
ENDIF.
ENDIF.
IF SY-UCOMM = 'PRIN'.
CHECKTABLED = MTABLE_N+0(1).
IF CHECKTABLED NE 'Z'.
MESSAGE I017.
LEAVE TO SCREEN 1000.
ENDIF.
IF SY-UNAME NE 'KAMESH.K'.
MESSAGE I023 WITH SY-UNAME.
LEAVE TO SCREEN 1000.
ENDIF.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR MFILENAM .
PERFORM F4_FOR_FILENAME .
INITIALIZATION .
T_TABL = 'Table Name' .
T_FILE = 'File Name' .
T_DOWN = 'Download Table' .
T_CHKF = 'Check File to Upload' .
T_UPLD = 'Upload File' .
T_SHOW = 'Show Table Contents' .
START-OF-SELECTION .
PERFORM CHECK_TABLE_NAME_IS_VALID .
END-OF-SELECTION .
IF TABLE_NAME_IS_VALID EQ ' ' .
MESSAGE I398(00) WITH 'INVALID TABLE NAME' .
ELSE .
PERFORM INSTANTIATE_DYNAMIC_INTERNAL_T .
CHECK DYNAMIC_IT_INSTANTIATED = 'X' .
CASE BUTTONSELECTED .
WHEN P_DOWNLD .
PERFORM SELECT_AND_DOWNLOAD .
WHEN P_CHKFIL .
PERFORM CHECK_FILE_TO_UPLOAD .
WHEN P_UPLOAD .
PERFORM UPLOAD_FROM_FILE .
WHEN P_SHOW_T .
PERFORM SHOW_CONTENTS .
ENDCASE .
ENDIF .
FORM CHECK_TABLE_NAME_IS_VALID.
DATA MCOUNT TYPE I .
TABLES DD02L .
CLEAR TABLE_NAME_IS_VALID .
SELECT COUNT(*) INTO MCOUNT FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'TABL'
AND OBJ_NAME = MTABLE_N .
IF MCOUNT EQ 1 .
CLEAR DD02L .
SELECT SINGLE * FROM DD02L WHERE TABNAME = MTABLE_N .
IF SY-SUBRC EQ 0.
IF DD02L-TABCLASS = 'TRANSP' .
TABLE_NAME_IS_VALID = 'X' .
ENDIF .
ENDIF.
ENDIF .
ENDFORM. " CHECK_TABLE_NAME_IS_VALID
FORM SELECT_AND_DOWNLOAD.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC EQ 0.
MESSAGE I398(00) WITH 'Table' MTABLE_N
'successfully downloaded to '
MFILENAM .
ENDIF.
ENDFORM. " SELECT_AND_DOWNLOAD
FORM UPLOAD_FROM_FILE.
DATA : ANS TYPE C .
DATA : LINES_OF_ITAB TYPE I .
DATA : MSY_SUBRC TYPE I .
CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
EXPORTING
TEXTLINE1 = 'Are you sure you wish to upload'
TEXTLINE2 = 'data from ASCII File to DB table '
TITEL = 'Confirmation of Data Upload'
IMPORTING
ANSWER = ANS.
IF ANS = 'J' .
PERFORM CHECK_FILENAME.
CLEAR MSY_SUBRC .
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
IF SY-SUBRC EQ 0.
DESCRIBE TABLE <FS_ITAB> LINES LINES_OF_ITAB .
IF LINES_OF_ITAB GT 0 .
MODIFY (MTABLE_N) FROM TABLE <FS_ITAB> .
MSY_SUBRC = MSY_SUBRC + SY-SUBRC .
ENDIF .
ENDIF.
IF MSY_SUBRC EQ 0 .
MESSAGE I398(00) WITH LINES_OF_ITAB
'Record(s) inserted in table'
MTABLE_N .
ELSE .
MESSAGE I398(00) WITH
'Errors occurred No Records inserted in table'
MTABLE_N .
ENDIF .
ENDIF .
ENDFORM. " UPLOAD_FROM_FILE
FORM F4_FOR_FILENAME.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_PATH = 'C:\'
MASK = ',.,..'
MODE = '0'
IMPORTING
FILENAME = MFILENAM
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5.
ENDFORM. " F4_FOR_FILENAME
FORM CHECK_FILENAME.
IF MFILENAM IS INITIAL
AND NOT ( MTABLE_N IS INITIAL )
AND P_SHOW_T NE BUTTONSELECTED.
CONCATENATE 'C:\'
MTABLE_N '.TXT' INTO MFILENAM.
ENDIF .
ENDFORM. " CHECK_FILENAME
FORM INSTANTIATE_DYNAMIC_INTERNAL_T.
CLEAR DYNAMIC_IT_INSTANTIATED .
I_STRUCTURE_NAME = MTABLE_N .
CLEAR IT_FIELDCAT[] .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
I_STRUCTURE_NAME = I_STRUCTURE_NAME
CHANGING
CT_FIELDCAT = IT_FIELDCAT[]
EXCEPTIONS
INCONSISTENT_INTERFACE = 1
PROGRAM_ERROR = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
LOOP AT IT_FIELDCAT .
CLEAR WA_FIELDCATALOG .
MOVE-CORRESPONDING IT_FIELDCAT TO WA_FIELDCATALOG .
WA_FIELDCATALOG-REF_FIELD = IT_FIELDCAT-FIELDNAME .
WA_FIELDCATALOG-REF_TABLE = MTABLE_N .
APPEND WA_FIELDCATALOG TO IT_FIELDCATALOG .
ENDLOOP .
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
EXPORTING
IT_FIELDCATALOG = IT_FIELDCATALOG
IMPORTING
EP_TABLE = MITAB .
ASSIGN MITAB->* TO <FS_ITAB> .
DYNAMIC_IT_INSTANTIATED = 'X' .
ENDIF.
ENDFORM. " INSTANTIATE_DYNAMIC_INTERNAL_T
FORM SHOW_CONTENTS.
CLEAR : <FS_ITAB> .
SELECT * FROM (MTABLE_N)
INTO CORRESPONDING FIELDS OF TABLE <FS_ITAB> .
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
IT_FIELDCAT = IT_FIELDCAT[]
TABLES
T_OUTTAB = <FS_ITAB>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDFORM. " SHOW_CONTENTS
FORM CHECK_FILE_TO_UPLOAD.
PERFORM CHECK_FILENAME.
CALL FUNCTION 'WS_UPLOAD'
EXPORTING
FILENAME = MFILENAM
FILETYPE = 'DAT'
TABLES
DATA_TAB = <FS_ITAB>
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TYPE = 4
NO_BATCH = 5
UNKNOWN_ERROR = 6
INVALID_TABLE_WIDTH = 7
GUI_REFUSE_FILETRANSFER = 8
CUSTOMER_ERROR = 9
OTHERS = 10.
IF SY-SUBRC EQ 0.
I_CALLBACK_PROGRAM = SY-REPID .
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = I_CALLBACK_PROGRAM
IT_FIELDCAT = IT_FIELDCAT[]
TABLES
T_OUTTAB = <FS_ITAB>
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
ENDIF .
ENDFORM. " CHECK_FILE_TO_UPLOAD
Message was edited by:
SAURABH SINGH
SENIOR EXECUTIVE
SAMSUNG INDIA ELECTRONICS LTD.,NOIDA -
How to delete data from dynamic internal table
Hi,
I have dynamic internal table and I have some slection screen fields , using these selection screen fields
(select -options), I have to filter the data? assigning will work with READ , but I have select options not the parametre,
and also delete will not work for dynamic table..
as we cannot use assigning with delete..
So how to do this?
and one more thing is , I cannot filter the data while selection( in select, I cannot filter the data-> as it's not coming directly from table, it's coming from buffer),
so now after selection of data, I need to filter the data from dynamic table.
Is there any way to do this?
Regards,
MrunalHi matt,
I tried with below code as you said. But I am getting dump. can you help?
here is my piece of code.
FIELD-SYMBOLS: <LS_DATA> type any,
<LT_DATA> TYPE table,
<L_FIELD> type any.
ASSIGN <l_buffer_entry>-dataptr->* TO <LS_DATA>.
ASSIGN <l_buffer_entry>-dataptr->* TO <LT_DATA>.
LOOP AT <LT_DATA> ASSIGNING <LS_DATA>.
ASSIGN COMPONENT 'BUKRS' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BUKRS.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ASSIGN COMPONENT 'BELNR' OF STRUCTURE <LS_DATA> TO <L_FIELD>.
IF <L_FIELD> NOT IN SO_BELNR.
DELETE <LT_DATA>.
ENDIF.
UNASSIGN <L_FIELD>.
ENDLOOP.
and here is the description of my dump:->>>
You attempted to access an unassigned field symbol
(data segment 32772).
This error may occur for any of the following reasons:
- You address a typed field symbol before it is set using ASSIGN
- You address a field symbol that points to a line in an internal table
that has been deleted
- You address a field symbol that had previously been reset using
UNASSIGN, or that pointed to a local field that no longer exists
- You address a global function interface parameter, even
though the relevant function module is not active,
that is it is not in the list of active calls. You can get the list
of active calls from the this short dump. -
DYNAMIC INTERNAL TABLE CREATION BASED ON THE CONTENT OF ANOTHER INTERNAL TA
Hi All
I need to create an internal table at runtime.
I have a selection screen parameter which is specific to country, Which can take values below
eg:- IT_AREA for Italy(IT)
FR_AREA for France(FR)
IE_AREA for Ireland(IE).....And similary for other countries
Based on the Above parameter, I need to create Internal Table as below
DATA: itab TYPE italy_data Occurs 0.
If I declare as above, Then itab has fields from italy_data. And this internal table i will be sending it to Function Module to get data into it.
My Requirement is to Create the Internal table itab during runtime for tables italy_data OR france_data OR ireland_data based on selection screen parameter. Tables on Country may have different number of fields in it.
Can anyone help me on this??Hi,
Here is a sample code to create a dynamic internal table.
REPORT ytrab03.
TABLES: mara, makt.
TYPE-POOLS: slis.
DATA: it_fcat TYPE slis_t_fieldcat_alv,
is_fcat LIKE LINE OF it_fcat,
ls_layout TYPE slis_layout_alv.
DATA: it_fieldcat TYPE lvc_t_fcat,
is_fieldcat LIKE LINE OF it_fieldcat.
DATA: new_table TYPE REF TO data,
new_line TYPE REF TO data,
ob_cont_alv TYPE REF TO cl_gui_custom_container,
ob_alv TYPE REF TO cl_gui_alv_grid,
vg_campos(255) TYPE c,
i_campos LIKE TABLE OF vg_campos,
vg_campo(30) TYPE c,
vg_tables(60) TYPE c.
DATA: e_params LIKE zutsvga_alv_01.
FIELD-SYMBOLS: <l_table> TYPE table,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
PARAMETERS: p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
is_fcat-fieldname = 'COL01'.
is_fcat-ref_fieldname = 'MATNR'.
is_fcat-ref_tabname = 'MARA'.
APPEND is_fcat TO it_fcat.
is_fcat-fieldname = 'COL02'.
is_fcat-ref_fieldname = 'MAKTX'.
is_fcat-ref_tabname = 'MAKT'.
APPEND is_fcat TO it_fcat.
LOOP AT it_fcat INTO is_fcat.
is_fieldcat-fieldname = is_fcat-fieldname.
is_fieldcat-ref_field = is_fcat-ref_fieldname.
is_fieldcat-ref_table = is_fcat-ref_tabname.
APPEND is_fieldcat TO it_fieldcat.
CONCATENATE is_fieldcat-ref_table is_fieldcat-ref_field
INTO vg_campos SEPARATED BY '~'.
APPEND vg_campos TO i_campos.
ENDLOOP.
*... Create the dynamic internal table
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
*... Create a new line
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
SELECT (i_campos) FROM mara INNER JOIN makt
ON mara~matnr = makt~matnr
UP TO p_max ROWS
INTO TABLE <l_table>.
LOOP AT <l_table> INTO <l_line>.
LOOP AT it_fcat INTO is_fcat.
ASSIGN COMPONENT is_fcat-fieldname
OF STRUCTURE <l_line> TO <l_field>.
IF sy-tabix = 1.
WRITE: /2 <l_field>.
ELSE.
WRITE: <l_field>.
ENDIF.
ENDLOOP.
ENDLOOP.
Regards,
Karuna. -
To populate data in a dynamic internal table
Hi,
I have an internal table <FS_1> which I have created dynamically. Now i need to populate the columns (7th column onwards) in the internal table with my data in GT_REQMT which is an internal table.
Data: L_IDX type I.
L_IDX = 6.
Loop at <FS_1> assigning <FS_2>.
If sy-tabix = 1.
Loop at GT_REQMT.
Add 1 to L_IDX.
*****I need to populate GT_REQMT-DATA to column 7 then 8 etc depending on the number of loops.
Modify <FS_1> from <FS_2>.
Endloop.
Else.
**do other things here**
Endif.
Endloop.
I have search through the forums and weblogs but the solutions are catered to populating the internal tables from SAP database using SQL statements.
I couldn't find anything on populating own data in dynamic table by looping it. Please help. THANKS!!
Cheers,
ChelseaHi!
I have used classes for dynamic internal table, SO i here give you my sample code for your help.
DATA : new_table TYPE REF TO data,
new_line TYPE REF TO data.
FIELD-SYMBOLS : <TAB1> type standard table,
<l_table> TYPE ANY TABLE,
<l_line> TYPE ANY,
<l_field> TYPE ANY.
count = count + 1.
clear wa_fieldcat.
wa_fieldcat-col_pos = count.
wa_fieldcat-fieldname = 'CONDITION'.
wa_fieldcat-coltext = 'Condition Value'.
wa_fieldcat-ref_field = 'KWERT'.
wa_fieldcat-ref_table = 'KONV'.
wa_fieldcat-outputlen = 13.
append wa_fieldcat to it_fieldcat.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = it_fieldcat
IMPORTING
ep_table = new_table.
ASSIGN new_table->* TO <l_table>.
CREATE DATA new_line LIKE LINE OF <l_table>.
ASSIGN new_line->* TO <l_line>.
ASSIGN COMPONENT KWERT OF STRUCTURE <l_line> TO <l_field>.
<l_field> = t_kschlkonv-vtext.
NOw u append internal table
IF its helps you then dont forget to rewards points.
Regards From
Priyank -
Populate data in dynamic internal table
Hi ppl,
I have a requirement where I need to display certain fields in the report output.
The output contains 8 fixed fields (common for all rows in output) and some dynamic fields (number of column varies with rows) which will be determined at runtime.
I am able to create the dunamic internal table....and at runtime I see the fields created in the internal table correctly.
Now my requirement is to fill this table with the data from 2 internal tables.
The values for the 8 common fields comes from the internal table t_output and the values for dynamic fields come from t_dynamic.
Please let me know the logic to merge these 2 internal tables into the dynamic internal table <dyn_table>.
Regards.Hello David,
This has been discussed many times before in this forum. Since the table structure is dynamic the fields are determined at runtime.
To assign data to this table you have to use [ASSIGN COMPONENT ... |http://help.sap.com/abapdocu_70/en/ABAPASSIGN_MEM_AREA_DYNAMIC_DOBJ.htm#!ABAP_ALTERNATIVE_4@4@] variant.
Please refer to the example provided in the documentation for details.
BR,
Suhas -
Select query for picking data in a dynamic internal table
Dear All,
Please help.
<u>The code is :</u>
p_table1 = itab_final-tabname1.
p_field1 = itab_final-fieldname1.
SELECT (p_field1) FROM (p_table1) INTO CORRESPONDING FIELDS OF TABLE <dyntable1>.
It is working fine when the domain is of CHAR
The piece of code is not working where domain is DATS, CURR, DEC, etc.
What shall I do so that it works for other domains also. Please its urgent......
<u>ERROR that came:</u>
An exception occurred. This exception will be dealt with in more detail
below. The exception, assigned to the class 'CX_SY_OPEN_SQL_DB', was not
caught, which
led to a runtime error. The reason for this exception is:
The data read during a SELECT access could not be inserted into the
target field.
Either conversion is not supported for the target field's type or the
target field is too short to accept the value or the data are not in a
form that the target field can acceptCheck below code
REPORT zpwtest .
*** Tables
DATA: lt_data TYPE REF TO data.
DATA: lt_fieldcatalog TYPE lvc_t_fcat.
data : p_field type string ,
p_table type string .
*** Structure
DATA: ls_fieldcatalog TYPE lvc_s_fcat.
*** Data References
DATA: new_line TYPE REF TO data.
*** Field Symbols
FIELD-SYMBOLS: <fs_data> TYPE REF TO data,
<fs_1> TYPE ANY TABLE,
<fs_2>,
<fs_3>.
ls_fieldcatalog-fieldname = 'MANDT'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ls_fieldcatalog-fieldname = 'CARRID'. "Fieldname
ls_fieldcatalog-inttype = 'C'. "Internal Type C-> Character
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ls_fieldcatalog-fieldname = 'CONNID'.
ls_fieldcatalog-inttype = 'N'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ls_fieldcatalog-fieldname = 'FLDATE'.
ls_fieldcatalog-inttype = 'D'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ls_fieldcatalog-fieldname = 'PRICE'.
ls_fieldcatalog-inttype = 'P'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ls_fieldcatalog-fieldname = 'CURRENCY'.
ls_fieldcatalog-inttype = 'C'.
APPEND ls_fieldcatalog TO lt_fieldcatalog.
ASSIGN lt_data TO <fs_data>.
CALL METHOD cl_alv_table_create=>create_dynamic_table
EXPORTING
it_fieldcatalog = lt_fieldcatalog
IMPORTING
ep_table = <fs_data>
EXCEPTIONS
generate_subpool_dir_full = 1
OTHERS = 2
IF sy-subrc <> 0.
ENDIF.
*** So <FS_1> now points to our dynamic internal table.
ASSIGN <fs_data>->* TO <fs_1>.
*** Next step is to create a work area for our dynamic internal table.
CREATE DATA new_line LIKE LINE OF <fs_1>.
*** A field-symbol to access that work area
ASSIGN new_line->* TO <fs_2>.
<b>
p_field = 'mandt carrid connid fldate price currency' .
p_table = 'sflight' .
*** And to put the data in the internal table
SELECT (p_field)
FROM (p_table)
INTO CORRESPONDING FIELDS OF TABLE <fs_1>.
</b>
*** Access contents of internal table
LOOP AT <fs_1> ASSIGNING <fs_2>.
ASSIGN COMPONENT 5 OF STRUCTURE <fs_2> TO <fs_3>.
WRITE: / <fs_3>.
ENDLOOP.
Maybe you are looking for
-
Modifying Workflow in the Enterprise Portal
Hi , I have a requirement in ESS expense claim. once the claim has been made that will be send to his line manager for approval. In the line manager inbox some button label has to be changed in EP. I have the system admin rights and content admin rig
-
Open in same window and clean cache from swf + html file generate with InDesign CS5
Hi, 1) I have a Indesign web file exported to swf + html. In my document I have a button that point to url (this url is html file of a second Indesign swf + html). When I click on button, the url was find an open in another window. Is it possible to
-
Unable to require passcode after 1 minute
Hi, instead I set up "Require Passcode" option to 1 minute, my iPhone doesn't require passcode even after 5 minutes. Please help to solve!
-
Throw Information message for sale order created with value less that 5$
Hi all, I am basically an abaper, I have got a requirement in SD. The requirement is any sales order created with value less that 5$, should be prompted with an error message saying the minimum order value should be more than 5$. Could any on
-
Hi everyone. I am trying to create Web Form by using php. Most of the resources i got from Google. I will include a code without css as i think is not relevant, however i might be wrong. Can anybody please give me direction what am i doing wrong ? Al