Need URL for non-intel Mac OS X Firefox

Firefox 7 for Intel Mac overwrote a version of Firefox that worked on my non-Intel Mac. No Firefox right now. Can't find usable version of Firefox on Mozilla website.

Found the answer. The correct URL is http://www.mozilla.org/en-US/firefox/all-older.html . The working version is 3.6+
Mac owners take notice---There is no link to the above URL on the Firefox website.
The advice to upgrade to version 4 is bogus.

Similar Messages

  • Which version lightroom for non-intel mac 10.5.8

    Which Version of Lightroom works best with a (non-Intel) Mac 10.5.8?  Thank You.

    There is none that Adobe will sell you.  They only supply the most recent version:  LR 5, which requires 10.7.5, I think.  Sometimes you can get the previous version, i.e. LR 4, on Amazon but sometimes those are just scams, too, so you want to make sure you’re buying from Amazon, themselves, not an Amazon-Marketplace vendor.
    To your specific question about what version is compatible with 10.5.8, if you go to the Adobe page for LR Mac updates:
    http://www.adobe.com/support/downloads/product.jsp?product=113 <http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh> &platform=Macintosh
    and click down into the past versions, it appears that LR 3.6 from 12/12/2011, will run on OSX 10.5 but LR 4.x will not, so I don’t think you’ll have much luck with such an old OS.

  • VOIP hardware for non-Intel Macs

    A question: is there any add-on hardware available to make a non-Intel desktop Mac ready to use for VOIP? Like a VOIP PCI express card? Currently, Intel Macs can use the Magic Jack or Skype; non-Intel Macs (such as my G5) can only use Skype or its equivalent. Which can be a discouraging pain in the butt if I want to also use the G5's sound system for the more conventional purposes, e.g., iTunes, iPod, alert sounds, mail sounds, importing audio, assembling soundtracks, etc. If a Skype call comes in when I'm listening to iTunes, for example, I have to plug in the Skype headset, open my System Preferences, change the settings, shut off iTunes, and only then can I answer the "phone". Are there any changes to the hardware coming to make this all(including the Magic Jack) unnecessary in the future?

    I was mistaken. There are settings within Skype to settle the problem I was having.

  • New OS'S for non-intel Macs stopping at Leopard?

    I see that the upcoming new OS will be only for Intel Macs...
    Ok Apple, are you making we older machine owners obsolete?

    Hi Mark Dareau;
    Apple does not read these threads. So you are not talking to them.
    To answer your question if you mean that by not being able to upgrade to Snow Leopard your Mac is obsolete then yes.
    Allan

  • From an iMac Intel Core i7 running Mac OS 10.7 and Firefox 7.0.1 I'm trying to sync to a Power Mac G5 running Mac OS 10.5.8 and Firefox 3.6.23, the highest versions available for non-Intel Macs. Is the sync function available between these two computers?

    In Firefox 3.6.23 the Preferences selection under the Firefox menu has no Sync icon.

    In Firefox 3.6.23 the Preferences selection under the Firefox menu has no Sync icon.

  • Will Install Disks for a MacBook (10.4.6) work on a non-Intel Mac?

    I have got hold of new and unused install disks for a MacBook. Its OSX Tiger 10.4.6. Although all the new Macs are now Intel Duo, will this still be able to be installed on my iBook G4 512Mb?
    Or will it only work on a Mac with an Intel Duo processor?
    iBook G4   Mac OS X (10.3.9)   512Mb

    The story has now changed somewhat. Copied from your original post in this thread.
    I have got hold of new and unused install disks for a MacBook. Its OSX Tiger 10.4.6. Although all the new Macs are now Intel Duo, will this still be able to be installed on my iBook G4 512Mb?
    Although this 10.4.6 install package for an iBook may work on your iBook, usually the build must be identical also.
    A link I provided in one of my previous posts in this thread.
    http://docs.info.apple.com/article.html?artnum=25517
    This install package may install OK on your iBook but if the build is not identical, it may not work correctly after the fact.
    Since the bods at the Apple Store you visited said this makes no difference - this iBook 10.4.6 install package you acquired will work on ANY non-Intel Mac, what are you worried about? Use it but to be on the safe side, I would first get the bods at this Apple Store to provide you a free exchange for a Tiger retail install install package if your install package doesn't work.

  • Sony HDR-SR11 /AVCHD/NON-INTEL MAC/HELP

    I have called both sony and apple tech support and both offered little help today.
    I have a Sony HDR-SR11 that I shot some HD content with. The computer registers that the camera is there as an external HDD. Sony's FAQ suggested that I save the AVCHD file to my HDD and it should work....NOPE
    I hooked it up to a PC and installed the software it comes with and I was able to view my files but not export them into a normal format.
    I have 2 sets of files one set is .m2t and the other is .mts both say they are Unix Executable files..***!
    I have a Power MAc G5 running Leopard and Final Cut Pro 6 I ran the software update and it says that as of today 100% up to date yet it says that FCP should be 6.0.2 mine says 6.0
    Apple support said that it may not even work on a non-intel Mac.....HELP
    anyone get this to work, supposedly Imovie work s with it but the files are grayed out in the menus for imovie so I dunno all I know is I need this footage off the camera ASAP.
    Thanks

    I came here actually looking for a different solution and not the one I'm about to say... but I will tell you that the new iMovie will import the video straight off the camera (in either 960x540 or 1920x1080). It's not ideal, but it works.
    In fact, I'm doing so right now, but I came here hoping there might be news of a new fix so that FCP will import it directly (it will not, log & capture will not do it, just so others are clear on this).
    That said, the video off the camera looks very nice. I'm still happy with the camera, even if I do have to do one hoop jump before I can edit.

  • Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06

    Can I use a Power PC non intel Mac Mini as an external HD with my iMac 3.06 Intel Core Duo
    I can't figure out how to get this to work. Is it possible?

    WildBull wrote:
    Will it work if I connect via usb instead of firewire?
    No. There is no "USB Target Disk Mode".
    Just so we're clear, when you start your Mac mini in FireWire Target Disk Mode (TDM - holding T on startup), do you see a FireWire icon on the Mac mini's display? IIRC, it's not required that the Mac mini be connected to a display for TDM, but it would help diagnose whether or not the mini is actually starting in this mode.

  • Is it worthwhile to buy the airport extreme for non intel

    I currently am using an airport express for my home network and want to use it on my home stereo(upstairs) so we can play music from itunes. So I need to buy another airport for downstairs. Will I get any benefit from the extreme or should I just get another express?

    idadof3, Welcome to the discussion area!
    I think iFelix provided a very good answer in your other thread "Is it worthwhile to buy the airport extreme for non intel".

  • Using MacBook backup with non-Intel Mac laptop

    I'm scheduled for a computer replacement at work (not a new one, but a hand-me-down from someone else). I was originally told it would have to be a Windows PC (grrr), but then it turned out that someone who recently left for another job had a Mac laptop that I can have instead. I'm not sure exactly what model it is, but it's my understanding that it's only a year or two old. I assume it will be an iBook or a PowerBook.
    I'm wondering if I can use my MacBook backup (which is on an external harddrive and is bootable) to boot up a non-Intel Mac laptop. Since I have to send my MacBook back in for repair (second round of RSD), I was hoping that once I get this older laptop I could just boot from my external and keep on working as if I still had my MacBook (without the ability to use Windows of course). I assume all the programs (except Parallels) would be compatible, but would the system files work?

    I don't think it will allowed you to boot from that external that installed with os X 10.4.x (compiled for macintel version).
    But surely you can use the data in it if you have proper or similar program at the older portable mac.
    But if you willing to try it, it won't hurt, just connect that external and restart while pressing the option key, and if it shows as an option for start up, click on it and see how it goes. If nothing happen, simply shutdown the laptop and restart regularly using its own hd.
    Good Luck.

  • USB Audio output for a intel Mac Mini

    Is there a USB Audio output device I can get for the Intel Mac Mini, that works in both Mac OS X and Windows XP Home?
    I took my Mini apart to put in a hard drive, and now the sound sometimes doesn't work (Internal or External).
    -Locutus

    This?
    http://www.griffintechnology.com/products/imic

  • Can I Multi-Process with an Older, Non-Intel Mac?

    ...when I am on a new Intel Mac with AE CS4?

    I don't understand the question. Can you use computer A while you're using computer B? Are you talking about network rendering? If so, then consider that both computers must be able to run After Effects and open the project that you're working with. Because After Effects CS4 only runs on processors with the Intel architecture (not PowerPC chips), the "non-Intel" Mac is a non-starter.

  • Need url for info on msi 6905 master, which is a slot1 adapter on m/board GA6 MM

    need url for info on an msi 6905 master slot1 adapter(cpu holder)

    http://www.msi.com.tw/program/support/download/dld/spt_dld_list.php?kind=1&CHIP=17&NAME=Archives
    you have the number wrong some were
    6905 is to high a number for a slot 1 board

  • Need driver for I960 on Mac OS 10.10. Thanks

    Need driver for I960 on Mac OS 10.10.  Thanks

    Hi jeremyrgeller, We do not have drivers for the i960 that are compatible with the Mac OS X 10.10 (Yosemite) operating system.  Please call or email us using one of the methods on our Contact Us page for other options available to you.

  • Parallel Deskop for non-intel based Macs?

    I have a 2 yeay-old Powerbook and want to run similar to Parallel Desktop. But I look at this product and it is for Intel machines. Does a product exist to do this same Windows function but on a power chip?
    Mike

    Hi Michael!
    Yes, Microsoft produces Virtual PC for PPC Macs. Have a look at this page on Microsoft's site <http://www.microsoft.com/mac/products/virtualpc/virtualpc.aspx?pid=virtualpc>.
    Virtual PC will not be ported to the Intel platform, which means you'll only be able to use it so long as you continue to use your PowerBook. It's much slower that Parallels on an Intel Mac and is definitely not intended for gaming.
    Hope this helps! bill
    1 GHz Powerbook G4   Mac OS X (10.4.8)  

Maybe you are looking for

  • Can someone please help with my Galaxy S3

    I have my phone set up to read texts when they are received. I think this is because I have 'driving mode' turned on. I like this feature very much. My problem is, with driving mode turned on every time I get a call or text or simply turn on my scree

  • In RWB----component monitoring --adapter engine-- status

    Hi , In the Runtime work bench component monitoring  if we click on adapter engine we get two tabls CCMS Status: Last Retry Jan 26, 2011 1:55:15 PM CET Ping and Self-Test Help Ping Status: HTTP request failed. Error code: "404". Error message: "Not F

  • ME21N - Doc.Overview On/Off

    Hi All, ME21N :Document.Overview On/Off ->Selection Variant - CHANGES 1.Go to ME21N transaction 2.Click Document Overview On 3.Now a hierarchial ALV will be displayed 4.In that selection variant select options - Purchase Orders/PR/Contracts etc.. lik

  • Add DataColumn from DataTable to DatGrid in WPF

    I have a DataGrid that need to be filled with value from Database and i need the first column to be populated into datagrid. Here is my backend code public string Get_vendor_like(Model_Vendor mv) SqlConnection con1; SqlCommand cmd1; SqlDataAdapter sd

  • No Primary Key Column was set. (UPD_NO_PK_SET)

    I'm trying to build an update record page that gets the primary key value passed from a dynamic edit selection. dynamic list is great..opens up to the update record page great...values filled in including the primary key...i can see the primary key v