Need USB 3.0 driver for Windows 7 running in Fusion

Greetings -
    I have a MacBookpro Retina that is about 3 weeks old.  So far it is running fairly well.  I have installed Fusion5 and am running Windows7 Ultimate 64 bit.  I have run into an issue however with my WD my passport 2tb USB3.0 drives.  they are seen in OS X 10.8 and work fine.  but when I try to attach to them with Windows 7 I get a message that the drivers are not installed and the drive is NOT seen in My computer.
  I have narrowed it down to be a driver issue because when I attach the drive to a USB2.0 hub the drive is seen and works fine. I have to run Windows 7 as windows 8 performance is totally unacceptable and I discovered that some software I have that is windows only is not compatible with Windows8.  I have tried a couple of intel drivers but they won't install so I am guessing I am trying to use the wrong ones.  If they are in the support software for boot camp they are not redily recognizable since I have all that and there is nothing marked USB3 support. 
  I am headed to Afghanistan soon (contractor) so I really need to get this thing working properly.  any and all help will be greatly appreciated.
Cheers, RDJ

Post on the Fusion forums:  http://communities.vmware.com/community/vmtn/desktop/fusion

Similar Messages

  • Cannot install NEC USB 3.0 Driver for Windows 7 - Now no USB 3.0

    I was trying to update the usb 3.0 driver on my G770 - connecting a USB 3.0 portable drive (or USB 3.0 flash) would slow down Windows and browsing from folder to folder would hang.
    I downloaded the latest driver from the site...
    NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit) - Lenovo G770 Notebook (IN5CAR01WW5.exe)
    and it asks for Renesas Electronics USB 3.0 Host Controller Driver disk during the installation.
    Renesas Electronics USB 3.0 Host Controller Driver for Windows XP exists but the driver for Windows 7 is NEC USB 3.0 Driver for Windows 7 (32-bit, 64-bit)
    What to do?
    error:

    Use the windows XP driver. They normally work fine.

  • USB Serial Controller Driver for windows 7 64bit

    USB Serial Controller Driver for hp 15-g049au windows 7 64bit
    This question was solved.
    View Solution.

    Hi,
    Install the Chipset drivers on the following link and reboot.
    http://support.amd.com/en-us/download/chipset?os=Windows%208.1%20-%2032
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Usb 3.0 driver for windows 7 64 bit hp 23-b011 all in one

    I have a hp 23-b011 that is a all in one computer. I downgraded the operating system to windows 7 64 bit because I prefer windows 7. Anyhow I need my usb 3.0 driver to work . I have tried the driver SP57875 it does not work. also have tried do the %temp% and copy it to the desktop and run it and it still does not work. If I am trying the wrong driver please let me know.
    When I go to device manager and to the universal serial bus (usb) controller and right click properties and go to details, there is no information it only says universal serial bus (usb) controller. I have the AMD E2-1800 APU with Radeon(tm) HD Graphics 1.70 GHz processor.
    Please let me know if I need a different driver thank u
    This question was solved.
    View Solution.

    Hi:
    Download and install both of these drivers and reboot.
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=405...
    http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=405...

  • Need USB 3.0 driver for my Satellite L755-1J9

    I'm from Spain, and after make format C: in my Satellite L755-1J9 , I can`t instal the USB 3.0 driver upload at the Toshiba drivers place in this webpage.
    Can someone who has this driver help me please?

    Hi Enrique
    According notebook specification your machine was delivered with preinstalled Windows 7 64bit and this original recovery image contains all necessary drivers, including driver for USB 3.0.
    The question is: what have you done exactly? Have you installed original OS version that you got with your machine or own Windows version and which one.
    If you still use Win7 64bit driver for USB 3.0 you can find here .

  • USB RS232/4 Driver for Windows CE

    I'm using USB RS232/4 device well with my laptop. I wonder whether i can use the device directly connected with Windows CE system instead of Windows XP system.
    I have LabView PDA Module and a single board computer operated by Windows CE.NET 4.2.
    Is there any driver of the device for Windows CE system?

    Windows CE is very different from Windows XP and currently the NI-Serial drivers is not supported on Windows CE. If you feel that this would be a valuable feature please file a product suggestion by going to Contact NI and click on the feedback link.
    -Josh

  • Hp pavillion 15-b142dx usb 3.0 driver for windows 7

    Have a hp sleekbook 15-b142dx and down graded from windows 8 to windows 7. Can't find the right driver to make the two USB 3.0 ports work. The 2.0 USB port works just fine.
    This question was solved.
    View Solution.

    Again you fixed it. Thanks so much!!!!!!!!!!

  • Usb 3.0 driver for windows 7

    my usb 3.0 is not working
    i need the driver

    Hi:
    Download and install both of these drivers and reboot.
    http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_139250_1&swEnvOid=405...
    http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=6943835&swItemId=ob_133037_1&swEnvOid=405...

  • Officejet 6700 need driver for windows 7

    Have a Officejet 6700 need to install the driver for windows 7, windows will not allow the driver to install? I have the orginal install CD and have tryed to ureinstall several times without luck. Seems windows doesn't like the signiture associated with the driver..

    Hi,
    Please download the following package and install to your Windows 7 computer:
        http://ftp.hp.com/pub/softlib/software12/COL41871/mp-109007-2/OJ6700_1315.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Adobe ps printer driver for windows vista. Where can I get it?

    I need Adobe ps printer driver for windows vista. Where can i get it? Plz help me. If yes, then where and if no, why?
    Any help is highly appreciated.
    Thanks.

    The Acrobat printer produces a PS file that is then sent to the Distiller process to create a PDF. The other PPD you mention is something I know nothing about. However, why would you want to use a different driver? The Adobe PDF driver is optimized for use in creating PDF files and other routes may not produce as good of a result. If the other PPD produces a PDF, then why are you asking about the Adobe driver?

  • I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    I need appleisightinstaller.exe to install the isight driver for Windows Vista running in Parallel Desktop 6 for Mac, but I don't have a Leopard DVD. What came with my Macbook Air was a flash stick "MacBook Air Software Reinstall Drive" only.

    All,
    A very interesting NOTE to this thread. In order to try and get the "ignore permissions" box to show up in GET INFO (so I could execute Matt the Magician's solution to file sharing issues)-- I ran the terminal command for disabling ACLs on my internal HD / start up disk (as indicated in the linked thread to BDAqua's forum).
    Although I understand that this was useless for disabling permissions on the start up disk (as everyone here pointed out) and allowing me to see the "ignore permissions" check box - somehow it did seem to fix my file sharing problem...and that was the root problem I wanted solved in the first place! After doing the terminal command and a quick reboot, I went in and tested file sharing on the chosen directory and I can create new files or work from existing files in the directory, with both users being able to modify / and save from both machines and each machine sees the revisions and can build from them. Bottom line - I'm stoked and want to thank everyone for their help.
    The only other tweak I made was going over to my wife's machine and instead of using her log in / password, I just used my name and password to connect to my main machine that was sharing directories. Maybe that's what fixed the problem or the ACL disable but either way...I'm up and running the way I want to be.
    Hope this thread helps anyone else who has these file sharing / permissions issues with Leopard. Especially for anyone wanting to do such a simple file sharing set up between 2 computers. I wish I understood exactly which tweak fixed the problem, but at least it works the way I want now.
    So happy to be done w/this one!
    Thx everyone. Any additional input on what solved it is welcome, so my curiosity is quelled...
    TC

  • Writing USB-Serial Converter Device Driver for Windows CE 6.0

    Dear Developers,
          I have a Silicon Labs chip Cp2108. Its a Quad USB to Serial converter. It supports all the operating systems except Win CE. So I have the source code of the driver for Linux 2.6 / Linux 3.0. I have experience in Device drivers development
    in Linux.
      Question is How will I start coding driver for Windows CE 6.0. Can anyone point me to a best starting point on this topic. All I need to do is make this chip work with WIN CE 6.0. Can anyone point me to a Sample driver source code It will be great.
     Regards,
         Winston

    Dear Vinoth, 
            Thanks for the valuable reply. 
      I am confused a bit here. I need to make the external USB -UART bridge (CP2108) work on win CE 7.
       the driver in Path \WINCE600\PUBLIC\COMMON\OAK\DRIVERS\USB\CLASS\USBSER is using the built in USB controller
    hardware and making it as a Serial port right ? 
       How do you go about making the external USB -UART bridge work as a COM port ? 
     I have a document from SIlicon Labs which gives info about Device descriptors and interface commands . 
      Regards,
        Winston 

  • How to install USB driver for Windows?

    I'm trying to connect my LG VS980 phone to a Windows XP computer. I'm having difficulty installing the USB driver.
    After following several false trails, I found what I think is the right file: on a "Product Support" page which says it's for a "G2 Verizon VS980," there's a button labeled, "Install the USB DRIVER / USB DRIVER for Windows / DOWNLOAD." I clicked the button and downloaded a file 8 MB file. Its name is LG. Not LG.exe or LG.msi or LG.zip. Just LG.
    When I double click the file, Windows quite reasonably asks me what program to use to run it. I don't know what program to use any more than Windows does.
    There's a link labeled "Instructions... LG G2 VS980 SOFTWARE UPDATE below the download button. When I click it, it loads instructions for installing software on the phone.
    Can anyone make sense of this for me?

    Orthoducks wrote:
    I'll so my best to answer the questions.
    >...what you're looking to do a transfer with...?
    Initially I want to download pictures taken with the phone's camera. I've considered other uses for a USB connection that I can explore once it's working. I'm puzzled by the question, though. Why should the type of data I want to transfer affect the fact that I can't find an installable driver? I wonder whether my question means the same thing to you as it does to me.
    Because photos and music are the basic media people want to transfer between their phones and computers. (Computers in this sense are laptops, desktops, note books etc.) So the question to you was valid.
    >Also, have you tried any other computers?
    No. Again, I'm puzzled. What difference would another computer make? Would I be able to find a download from one computer that I can't find from another? (Only by blind chance.) Might another computer be able to execute or load a file with no filetype? (Only if it has magical powers.)
    Different computers may work where the computer you own evidently does not work. It is good to check the connection of the device to another computer to rule that out. I will answer the obvious of different operating systems and how they function.
    >And which software version if your phone currently running?
    That question makes sense. Unfortunately I can't answer it. I've looked up how to find the version number, and the instructions tell me to select an "About phone" item in the Settings menu, which doesn't exist.
    Doesn't exist? open the Settings Menu go all the way to the bottom (scroll down) the last entry is "ABOUT PHONE" click it. It will give hardware and software versions operating system number etc. Its there trust me. My wife just bought this phone and loves it.
    >Often times, the device drivers you're prompted to install are supported solely by the computer's software.
    I'm not sure what you're saying here. Taken at face value, it's a trivial and obvious: any driver that one installs on any computing device is supported solely by (i.e., depends on) the device's software. But how does that relate to the question about the version of Android? Android runs on the phone; the driver has to run on the computer.
    You stated you are using an older Windows XP computer, I can tell you I hooked my wife's phone to our Windows 8.1 computer and no drivers were necessary. It came up with an option on the phone screen and I chose USB Mass Storage for the connection. This option is also in the phones settings. Read the manual it has loads of information form you to use.
    The device had a drive letter assigned and it was labeled LG-Network and once you double click it the folders for music, photos, etc. are all there. Via using windows manager you can simply do a copy and paste to and from the different folders and drives with ease.
    Good Luck

  • Need USB 3.0 Drivers for HP Pavillion G4-2024tx Windows 8.1

    Hello,
    I am having HP Pavillion G4-2024tx laptop. 
    Recently i installed Windows 8.1 operating system. I have Seagate Backup plus slim 2tb Hard drive with USB 3.0.
    when i am copying the files from laptop to hard drive the copy speed im getting is 25-27 MB/s only.
    Do i need to install USB 3.0 drivers seperately in my laptop?? If yes, Please provide me USB 3.0 drivers for windows 8.1 64-bit.
    Thank you

    Did you actually install any drivers or just load Windows 8.1? Did you install a main chipset driver?
    https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=20775&lang=eng&ProdId=816

  • Need video driver for Windows 7

    I installed Windows 7 Home Premium on a Presario SR-1616NX and all the drivers installed OK, but it said I needed an updated video driver for the Aero transparency feature. Anyone know where I might find it?  Thanks.

    Hi,
          AMD’s DirectX 9 ATI Radeon graphics accelerators are not officially supported under Windows 7.   If the user chooses to, they can install the ATI Catalyst Windows Vista graphics driver under Windows 7.   Please be aware that none of the new Windows 7 graphics driver (WDDM 1.1) features are supported (as the Windows Vista level graphics driver is limited to WDDM 1.0 level support).  Using the ATI Catalyst Windows Vista driver under Windows 7 is not officially supported by AMD, and as such AMD will not provide any form of customer support for users running in this configuration.
    Driver link below:
    http://support.amd.com/us/gpudownload/windows/Legacy/Pages/radeonaiw_vista32.aspx?type=2.4.1&product=2.4.1.3.21&lang=English
    Chandu
    +Hp Everything is Possible.

Maybe you are looking for