Need User Defined Function sample

Hi -
I have the following question - here is the mapping of an unbounded tag <Line> in the source and a segment TDLINE in the idoc as follows.
Line 1 .. unbounded ( source )
E1EDKT2 0 .. 99999999999
     Segment required
     TDLINE 0 ..1
     TDFORMAT 0 ..1
My problem is I need for each Line tag to write out to a new TDLINE - but as I duplicate the E1EDKT2 to the max of 4 - I get the first <Line> text in each of the TDLINE
Here is a sample of the input and output ...
INPUT
<Message><OrderItemId>27036336</OrderItemId><To>A</To><From>B</From><Line>This is a test message. It should be split up into multiple </Line><Line>lines with a length less than 200 characters. -- Thank you</Line></Message></Messages></OrderHeader>
OUTPUT
<E1EDKT1 SEGMENT="1"><TDID>ZGCD</TDID><TSSPRAS>EN</TSSPRAS><E1EDKT2 SEGMENT=""><TDLINE>                                                                      </TDLINE><TDFORMAT>*</TDFORMAT></E1EDKT2><E1EDKT2 SEGMENT=""><TDLINE>A</TDLINE><TDFORMAT>/=</TDFORMAT></E1EDKT2><E1EDKT2 SEGMENT=""><TDLINE>B</TDLINE><TDFORMAT>/=</TDFORMAT></E1EDKT2><E1EDKT2 SEGMENT=""><TDLINE>This is a test message. It should be split up into multiple </TDLINE><TDFORMAT>/=</TDFORMAT></E1EDKT2><E1EDKT2 SEGMENT=""><TDLINE>This is a test postcard message. It should be split up into multiple </TDLINE><TDFORMAT>/=</TDFORMAT></E1EDKT2></E1EDKT1>
Any help would be greatly appreciated!

I think that the problem why this solution will not work is because of the structure - I have to deal with sort of a flat strucure where the number of Line tags is multiple but the Messages is only one. See below :
<OrderHeader>
          <OrderID>orderid</OrderID>
          <StoreID>storeid</StoreID>
          <CustomerID>customreabc</CustomerID>
          <Currency>USD</Currency>
          <OrderCharges>
               <TotalProductPrice currency="USD">675.00000</TotalProductPrice>
               <TotalAdjustment currency="USD">0.00000</TotalAdjustment>
               <TotalShippingCharge currency="USD">14.95000</TotalShippingCharge>
               <TotalSalesTax currency="USD">56.36000</TotalSalesTax>
               <TotalShippingTax currency="USD">0.00000</TotalShippingTax>
          </OrderCharges>
          <BillingAddressInfo>
               <AddressLine1>3966 Davila Dr</AddressLine1>
               <AddressLine2 xsi:nil="true" />
               <AddressLine3 xsi:nil="true" />
               <City>Dallas</City>
               <StateOrProvinceName>SD</StateOrProvinceName>
               <Country>United States</Country>
               <PostalCode>77777</PostalCode>
               <Telephone>9899899898</Telephone>
               <Email>[email protected]</Email>
               <LastName>doe</LastName>
               <FirstName>joe</FirstName>
          </BillingAddressInfo>
          <PlacedDate>2007-03-12</PlacedDate>
          <PlacedDateTime>2007-03-12 10:31:57.378</PlacedDateTime>
          <Messages>
               <Message>
                    <To>A</To>
                    <From>B</From>
                    <Line>this is a string of text that</Line>                                                <Line>must be continued on the next line</Line>                                                 <Line> and must write out to the appropriate segments</Line>
</Message>
          </Messages>
     </OrderHeader>

Similar Messages

Need user define function for the message mapping structure

Hi All
I am new to XI.I need the java code for Udf for the following structure.
i have two input and one out put as error.
order_nos----
user define function-------error message
order_details----
num of orders---- i.e. 10
order_details------ i.e. whole order records details
1.i have to compare the 1st input with 2nd one means if the ist input contain 10 means there are 10 orders in 2nd input.if not then i have to give error message .
2.then i have to check the fields in 2nd input has no null values.if no values the output will be error message.
Edited by: Rohit Kumar on Dec 18, 2008 4:43 PM

Hi Sudhir
thanks for your continues help.i need some help so that i can fulfill my requirmrnt
this is my message mapping xml.
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:methodCall_MT xmlns:ns0="http://www.dfdsf">
<num_orders>10</num_orders>
<test_mode />
- <order_x> ( which is order details)
<order_id>t78tyu8t</order_id>
<order_date />
<mfg_id />
<catalog_id />
<first_name />
<last_name />
<recipient />
<message />
<address1 />
<address2 />
<address3 />
<city />
<state />
<zip />
<country />
<country_code />
<phone />
<subtotal />
<tax />
<shipping />
<total />
<shopatron_total />
<fulfiller_total />
<shipment_id />
- <additional_info>
<in_store_pickup />
- <express_shipping>
<express_shipping_flag />
<express_shipping_text />
<express_shipping_arrival />
</express_shipping>
</additional_info>
- <discount>
<discount_description />
<discount_percentage />
<discount_total />
</discount>
<lang_id />
<currency_id />
<packing_list />
<num_items />
- <items>
<item_id />
<quantity />
<price />
<part_number />
<fulfiller_total />
<shopatron_total />
- <options>
<option_x />
</options>
</items>
</order_x>
</ns0:methodCall_MT>
this my mapping where under one element number elements are there.when i am excuting the code to check the null value its always giving the there is null val but i have filled evrything.its due to first its checking the order_x and which will be always null.uder this all data will be filled.please suggest what to change in the udf.the code given by u is working fine but its failing in this scenario because it getting the parent filed is null.

User-defined function in FILTER clause

hi,
can i create the user-defined functions and use them in the FILTER clause in the sem_match function? there are some built-in functions for the FILTER clasue. however, only one function (DATATYPE(literal)) support for date/time in the built-in functions. i want to implement some user-defined funcitons in the FILTER clause which can check time intervals in ontology. there are some functions about valid time in the WorkSpace Manager such as WM_OVERLAPS, WM_CONTAINS,WM_MEETS, etc. so, can i write some functions using the these valid time functions in WM and use them in the FILTER clause? thanks a lot in advance.
hong

Hi Hong,
You don't need user-defined functions to do time interval comparisons. You can directly compare xsd:dateTime values with the built-in comparison operators: <, >, =, !=, <=, >=
For example, the query pattern below could find events that happened during event1 if we have data such as:
:event1 :startTime "2013-01-01T03:15:00Z"^^xsd:dateTime .
:event1 :endTime "2013-02-01T02:15:00Z"^^xsd:dateTime .
:event2 :startTime "2013-01-11T14:15:00Z"^^xsd:dateTime .
:event2 :startTime "2013-01-14T12:15:00Z"^^xsd:dateTime .
SELECT ?e2
WHERE
{ :event1 :startTime ?e1_st; :endTime ?e1_et .
?e2 :startTime ?e2_st; endTime ?e2_et .
FILTER (?e1_st < ?e2_st && ?e2_et < ?e1_et) }
In general, it is trivial to convert interval relations such as meets and overlaps to conditions on start and end times.
Hope this helps.
- Matt

Need help with user defined function

Hello SDN,
I need some help with a user-defined function. My source message contains multiple
generic records (1000 char string), and my target message is 1 header record,
then multiple generic records. See description of source and target messages below:
Source:
GenericRecordTable 1..unbounded
    Row (1000 char string)
Target:
Field1 (char5)
Field2 (char5)
Field3 (char5)
IT_Data
    GenericRecordTable 1..unbounded
      Row (1000 char string)
Basically, what I need to do in my user defined funtion is to map the first record
in my source record to the 3 header fields, then map all of the rest of the records
(starting from line 2) into the GenericRecordTable.
Can someone please help me with the code for the user defined function(s) for this
mapping?
Thank you.

hi,
Activities
1. To create a new user-defined function, in the data-flow editor, choose Create New Function (This
graphic is explained in the accompanying text), which is located on the lower left-hand side of the
screen. In the menu, choose Simple Function or Advanced Function.
2. In the window that appears, specify the attributes of the new function:
Name
Technical name of the function. The name is displayed in the function chooser and on the data-flow
object.
Description
Description of how the function is used.
Cache
Function type (see above)
Argument Count
In this table, you specify the number of input values the function can process, and name them. All
functions are of type String.
3. In the window that appears, you can create Java source code:
a. You can import Java packages to your methods from the Imports input field, by specifying them
separated by a comma or semi-colon:
You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since
all message mappings require these packages and therefore import them. You should be able to
access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the
package under Import. In other words, you do not have to import it as an archive into the Integration
Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the
SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
In addition to the standard packages, you can also specify Java packages that you have imported as
archives and that are located in the same, or in an underlying software component version as the
message mapping.
b. Create your Java source text in the editor window or copy source text from another editor.
4. Confirm with Save and Close.
5. User-defined functions are limited to the message mapping in which you created the function. To
save the new function, save the message mapping.
6. To test the function, use the test environment.
The new function is now visible in the User-Defined function category. When you select this category,
a corresponding button is displayed in the function chooser pushbutton bar. To edit, delete, or add the
function to the data-flow editor, choose the arrow next to the button and select from the list box
displayed.
http://help.sap.com/saphelp_nw04/helpdata/en/d9/718e40496f6f1de10000000a1550b0/content.htm
http://java.sun.com/j2se/1.5.0/docs/api/
/people/krishna.moorthyp/blog/2006/07/29/documentation-html-editor-in-xi
/people/sap.user72/blog/2006/02/06/xi-mapping-tool-exports
http://help.sap.com/saphelp_nw04/helpdata/en/43/c4cdfc334824478090739c04c4a249/content.htm
UDF -
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Regards

Urgent Help Needed - Associating Statistics with User-Defined Functions

Hello,
We have an appication uses cost-based optimizer and uses a lot of TO_DATE and SYSDATE calls in FROM and WHERE clauses. For certain reasons, every call to TO_DATE and SYSDATE has been replaced by MY_TO_DATE and MY_SYSDATE respectively (which in turn call built-in functions). However, cost based optimizer is behaving strangely, which is understanble, based on the lack of user-defined functions statistics. I am under the impression that I should use something like:
ASSOCIATE STATISTICS WITH FUNCTIONS my_to_date DEFAULT SELECTIVITY ?;
ASSOCIATE STATISTICS WITH FUNCTIONS my_to_date COST (?,?,?);
ASSOCIATE STATISTICS WITH FUNCTIONS my_sysdate DEFAULT SELECTIVITY ?;
ASSOCIATE STATISTICS WITH FUNCTIONS my_sysdate COST (?,?,?);
but what should the values (?) be?. I guess I want to replicate TO_DATE and SYSDATE values, but how would I find out what they are? Thanks in advance...
P.S. I am also looking for workarounds (I cannot create a synonym for TO_DATE right?), so any help is welcome!!!

Hi emmalou69 ,
You told your actual parameter is
5, 5, 7.3 and 'z'
so change your method like
public static int test(int x, int y, double d, char ch)
because 5 - int; 7.3- float or double; z is char.
your method returns
public static int.
so you should return only int variable. but in your code you mentioned double. it's not correct.
The original code should look like
public class rubbish
     public static void main(String args[]){
          rubbish f = new rubbish();
          f.test(5, 5, 7.3 ,'z');
     public static int test(int x, int y, double d, char ch)
          int value;
          x = 5;
          y = 5;
          d= 7.3;
          ch = 'z';
          value =((int) d + x + y + ch);
          System.out.println( x + ch + d + y);
          return value;
}//here int value of z is 122.
and int(7.3) is 7
so 7+5+5+122 = 139.3
but value =((int) d + x + y + ch); returns 139. because you convert double to int that is 7.3 to 7
If it is useful, rate me duke dollars,
Thanks

User defined function in a cursor

Hi All,
I need to use a user defined function(which returns a value based on my Procedure's input parameter) in my explicit cursor. Something like
create or replace procedure test(pi_input number)
cursor c1
is
select col1,
           col2,
          func(pi_input),
          col4
from table;
begin
end;
Is this possible? I

Hi,
User-defined functions can appear in SQL statements, including cursors, if they follow certain rules (e.g., all arguments are IN arguments, in one of the SQL data types).
You really need to post your code. You don't need to post the compete code; a simplified version that gets the same error would serve just as well (actually better). Include CREATE TABLE and INSERT statements for any tables used, the function code, the code that calls the function, and the results you want from that code, given the sample data you posted.
Explain, using specific examples, how you get those results from that data.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002
Does your function work the way you want when it is not in a cursor?

SQL User Defined Functions for performing statistical calculations

Hi!
   I hope you can help. I just wasn’t sure where to go with this question, so I’m hoping you can at least point me in the right direction.
   I’m writing a SQL Server stored procedure that returns information for a facility-wide scorecard-type report. The row and columns are going to be displayed in a SQL Server Reporting Services report.
   Each row of information contains “Current Month” and “Previous Month” numbers and a variance column. Some rows may compare percentages, others whole numbers, others ratios, depending on the metric they’re measuring. For each row/metric the company has specified whether they want to see a t-test or a chi-squared statistical test to determine whether or not there was a statistically significant difference between the current month and the previous month.
   My question is this: Do you know where I can find a set of already-written user defined functions to perform statistical calculations beyond the basic ones provided in SQL Server 2005? I’m not using Analysis Services, so what I’m looking for are real SQL User Defined Functions where I can just pass my data to the function and have it return the result within a stored procedure.
   I’m aware that there may be some third-party statistical packages out there we could purchase, but that’s not what I’m looking for. And I’m not able to do anything like call Excel’s analysis pack functions from within my stored procedure. I’ve asked. They won’t let me do that.   I just need to perform the calculation within the stored procedure and return the result.
   Any suggestions? Is there a site where people are posting their SQL Server UDF’s to perform statistical functions? Or are you perhaps aware of something like a free add-in for SQL that will add statistical functions to those available in SQL? I just don’t want to have to write my own t-test function or my own chi-squared function if someone has already done it.
Thanks for your help in advance! Oh, and please let me know if this should have been posted in the TSQL forum instead.  I wasn't entirely sure.
Karen Grube

STATS_T_TEST_
docs.oracle.com/cd/B19306_01/server.102/b14200/functions157.htm
STATS_T_TEST_ONE: A one-sample t-test
STATS_T_TEST_PAIRED: A two-sample, paired t-test (also known as a crossed t-test)
STATS_T_TEST_INDEP: A t-test of two independent groups with the same variance (pooled variances)
STATS_T_TEST_INDEPU: A t-test of two independent groups with unequal variance (unpooled variances)

Calling the function NUMBER_GET_NEXT from an XI User Defined Function

Hi there,
A number range object has been created on our XI server, called, ZBC_BKSTMT.
I need to call the function NUMBER_GET_NEXT (standard SAP function for number range objects) with the parameters:
NR_RANGE_NR = 01
OBJECT = ZBC_BKSTMT
Calling the NUMBER_GET_NEXT function will return a unique integer. However, i need to call it from a User Defined Function because I need to make use of the returned integer in my message mapping.
Thanks,

Hello,
If you have SP13, SAP provides a RFC API which can be called during the mapping. Refer to this document:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-code-samples/xi%20mapping%20lookups%20rfc%20api.pdf
Also check this weblog :
/people/siva.maranani/blog/2005/08/23/lookup146s-in-xi-made-simpler
For pre-SP13 systems, refer to this How-To
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/xi/xi-how-to-guides/how%20to%20perform%20sap%20data%20lookups%20within%20xi%20mappings
***************Reward points,if found useful

How can I use Seeburger java functions on SAP XI's user defined functions?

Hi All,
As my title implies; how can I use Seeburger java functions on SAP XI's user defined functions? I've tried searching over the net in tutorials regarding this topic but I failed to find one; can someone provide me information regarding my question? thanks very much.
best regards,
Mike

Hi Mike !
You should check your documentation about which java classes you need to reference in the "import" section of your UDF. And also deploy the java classes into the java stack or include them as a imported archive in integration repository...it should be stated in the seeburger documentation.
What kind of functions are you trying to use?
Regards,
Matias.

User-Defined Function and Context Manipulation

Hi Mapping Gurus, I need your help.
I have a user-defined function and one of my input parameter (c) is in a loop (EDI segment). So one, if I execute my function I get:
Exception:[java.lang.ArrayIndexOutOfBoundsException: 0]
If I change the context or use the remove context node function its working but its always taking the first row in consideration since I'm using c[0] . Here is the logic:
String WHERE_CLAUSE = "A"" = ""'"b[0]"'"" and B = ""'"c[0]"'";
So since c is an array [], I have tried different logic to get to the right row.
1- I tried using another parameter (e) to pass a counter or an index to my function. So each time it's looping, it's passing a new value to the function but Im still getting the first row and Im not to sure why?
int G = Integer.parseInt(e[0]); // e[] = My counter field
String WHERE_CLAUSE = "A"" = ""'"b[0]"'"" and B = ""'"c[G]"'";
2- I tried using a parameter stored in the container:
String Num;
Num = (String)getParameter(counter);
if (Num == null) G = 0;
else
G = Integer.parseInt(Num);
G = G + 1;
String WHERE_CLAUSE = "A"" = ""'"b[0]"'"" and B = ""'"c[G]"'";
Num = "" + G;
setParameter(e[0], Num);
and Im still getting the first one, look like its using a different container each time its looping so the Value is always the same?
4- I created a new user-defined function with the container logic, then its working but Im back to the same problem in my main function, its only looking at e[0] for my counter all the time.
5- I tried using the Seeburger Java Variables and guess what in the main fonction, as new UDF,... and guess what, same result!
So anybody out there that was able to get UDF's working into a multiple context scenario?
Am I missing something?
I will reward points and beer for any help!

This is one of the text with passing a counter to the function to try to go to the right row in the array since I'm doing a remove context and I'm getting all the d_234's:
public void ReadTable(String[] a,String[] b,String[] c,String[] d,String[] e,ResultList result,Container container){
int G = Integer.parseInt(e[0]); // My counter
String var;
String DBTABLE = a[0];
String lookUpField = d[0];
String WHERE_CLAUSE = "A"" = ""'"b[0]"'"" and B = ""'"c[G]"'";
Now this one was with the internal container logic:
int G;
String DBTABLE = a[0];
String lookUpField = d[0];
String Num;
Num = (String)getParameter(e[0]);
if (Num == null) G = 0;
else
G = Integer.parseInt(Num);
G = G + 1;
Num = "" + G;
setParameter(e[0], Num);
String WHERE_CLAUSE = "A"" = ""'"b[0]"'"" and B = ""'"c[G]"'";
And now with the Seeburger Variables:
int G;
try {
VariableBean be=VariableFactory.getVariableInstance("");
G = Integer.parseInt(String.valueOf(be.getStringVariable("yves")));
} catch (Exception f) {
throw new RuntimeException(f);
String DBTABLE = a[0];
String lookUpField = d[0];
String WHERE_CLAUSE = "A"" = ""'"b[0]"'"" and B = ""'"c[G]"'";
try {
G = G + 1;
Num = "" + G;
VariableBean be=VariableFactory.getVariableInstance("");
be.setStringVariable("yves",Num);
catch (Exception f) {
throw new RuntimeException(f);
All 3 logics were returning always the first row or a counter of 1 if the logic is in the main ReadTable function.

User Defined Function (UDF) help required. Pls advice urgent.

Hi ,
CRM -- XI (UDF) -- Socket Connection
Now in User Defined Function (UDF) of Message Mapping I will open Socket Connection.
Send CRM XML request to socket and get XML response from Socket and then map to some system.
Can I write Java Class code in User Defined Function (UDF) of Message Mapping instead of Java Mapping in blog below?
/people/saravanakumar.kuppusamy2/blog/2005/12/15/socket-integration-with-xi
Regards

Henry,
Do you have a structure for your response...if you do then you can do extended reciever det with sync/async..shouldent matter, i just tried it and i dont get any error.
in your reciever determination..Check the box for standard rec det then add your first condition..of the value of a field to true..then send to A..
then you select add condition..and add for second reciever..that should be it, you shouldent need a bpm for such a simple scenario..it definetly is an overkill.
Regards
Ravi Raman

User defined function during Mapping.

Hi,
I am trying to retrieve filename using user defined function.
The payload is simple.
<?xml version="1.0" encoding="UTF-8"?>
<ns0:FTPTOFTP_MT_OB xmlns:ns0="urn://ftptoftp.com">
   <RECORD>
      <ROW>
         <EMPNO>723</EMPNO>
         <NAME>Jack</NAME>
      </ROW>
   </RECORD>
</ns0:FTPTOFTP_MT_OB>
the code for user defined function is
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
return ourSourceFileName;
now during message mapping ...
do I have to have extra xml tag in the destination
message which is now having
<?xml version="1.0" encoding="UTF-8"?>
<ns0:FTPTOFTP_MT_IB xmlns:ns0="urn://ftptoftp.com">
   <RECORD>
      <ROW>
         <EMPNO>723</EMPNO>
         <NAME>Jack</NAME>
      </ROW>
   </RECORD>
</ns0:FTPTOFTP_MT_IB>.
If yes ...
Then how to graphically map this extra xml tag.

Hi Deepak,
If u want to display the source file name in ur output, then ur output XML structure there should be an extra tag for displaying the file name.
In message mapping, select the user defined function which u have already created and map it to the tag for storing the file name in the target message XML format.
There is a editor present to write the user defined function on the bottom left corner of the message mapping screen.
For this function u need to select the Simple Function Tab.
Regards
Neetu

User-defined function in package

Hi all,
is it possible to return more than 1 value when using user-defined function in package?

I'll try to describe my situation. My need is to find correct client type by its cid number. If it's individual (ct.officialtype = 3) then function returns 3. If it's not individual (ct.officialtype <> 3) then function should check ENTERPRISETYPE.id, 910 is small business (function should return 1), else it returns 2. You can find my try below, it returns
ORA-24344: success with compilation error
13/29   PLS-00201: identifier 'US1' must be declared
13/34   PL/SQL: ORA-00904: : invalid identifier
13/1    PL/SQL: SQL Statement ignored
17/4    PLS-00201: identifier 'US1' must be declared
17/1    PL/SQL: Statement ignored
9/13    PLS-00323: subprogram or cursor 'F_CLIENTTYPE' is declared in a package specification and must be defined in the package bodyCould you please give me solution on how do I write this procedure? It should be procedure, because I need to use it in SELECT statement.
CREATE OR REPLACE PACKAGE creator.marco_function_clienttype
IS
-- 0 - not found
-- 1 - small business
-- 2 - corporate
-- 3 - individual
   FUNCTION f_clienttype
     (cid number
     RETURN NUMBER;
END;
CREATE OR REPLACE PACKAGE BODY creator.marco_function_clienttype
IS
FUNCTION f_clienttype
     (ccid number)
     RETURN NUMBER
IS
    Us NUMBER;
Begin
--officialtype = 2 - corporate, officialtype = 3 - individual
select ct.officialtype into Us1
from contragenttype ct, contragent d
where d.id = ccid and ct.cid = d.contragenttypeid;
IF Us1 = 3 THEN
select '3' as t into Us from dual;
ELSE
--ENTERPRISETYPE.id = 910 - small business
select dd.enterprisetypeid into Us2
from contragent dd
where dd.id = ccid ;
IF Us2 = 910 THEN
select '1' as t into Us from dual;
ELSE
select '2' as t into Us from dual;
END IF;
END IF;
Return nvl(Us,0);
END;
END;
/

Error in simple user defined function

Hi all,
I have seen one simple user defined function on scenario. Now it is working fine. Same code I have used another place. But it is giving some errors
D:/usr/sap/C08/DVEBMGS00/j2ee/cluster/server0/./temp/classpath_resolver/Mapc6fa0c70297511dbaf7e00c09f4504e7/source/com/sap/xi/tf/_ST_MM_.java:3: package javax.mail.internet does not exist
import com.sap.aii.mappingtool.tf3.;import com.sap.aii.mappingtool.tf3.rt.;import java.util.;import java.io.; import java.lang.reflect.;import javax.mail.internet.;import javax.mail.;import java.util.;import java.util.Date;import javax.activation.;import java.lang.reflect.;import javax.mail.event.*;
Like that it has shown 13 errors. I have given the package names in imports field what previous function has.

Hi,
Please see this from SAP help
<i>a. You can import Java packages to your methods from the Imports input field, by specifying them separated by a comma or semi-colon:
You do not need to import the packages java.lang., java.util., java.io., and java.lang.reflect. since all message mappings require these packages and therefore import them. You should be able to access standard JDK and J2EE packages of the SAP Web Application Server by simply specifying the package under Import. In other words, you do not have to import it as an archive into the Integration Repository. You can also access classes of the SAP XML Toolkit, the SAP Java Connector, and the SAP Logging Service (see also: Runtime Environment (Java-Mappings)).
In addition to the standard packages, you can also specify Java packages that you have imported as archives and that are located in the same, or in an underlying software component version as the message mapping.
b. Create your Java source text in the editor window or copy source text from another editor.</i>
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Regards
Vijaya

User defined function in PI 7.1 compilation error "Recompile with -Xlint"

Hi All,
I have a user defined function in PI 7.1 .,which is throwing the following error.
Do i need to add any import statements like "import java.lang.String" in the beginning.
It is unable to recognize the String methods used in the user defined function.
E:\usr\sap\PID\DVEBMGS30\j2ee\cluster\server0\.\temp\classpath_resolver\Map02580a102a0911deb2b20019990eddfd\source\com\sap\xi\tf\_MM_C_to_Goods_.java:276:
cannot find symbol
symbol : method trim()
location: class java.lang.Object
if(container.getParameter("AdjustmentQuantity").trim().startsWith("-")){ ^
Note: E:\usr\sap\PID\DVEBMGS30\j2ee\cluster\server0\.\temp\classpath_resolver\Map02580a102a0911deb2b20019990eddfd\source\com\sap\xi\tf\_MM_C_to_Goods_.java
uses or overrides a deprecated API.
Note: Recompile with -Xlint:deprecation for details.
Note: E:\usr\sap\PID\DVEBMGS30\j2ee\cluster\server0\.\temp\classpath_resolver\Map02580a102a0911deb2b20019990eddfd\source\com\sap\xi\tf\_MM_C_to_Goods_.java
uses unchecked or unsafe operations.
Note: Recompile with -Xlint:unchecked for details.
Any Help greatly appreciated..
Collins

container.getParameter() returns Object, not String.
try following:
String aq = (String) container.getParameter("AdjustmentQuantity");
if(aq.trim().startsWith("-"))
Regards
Stefan

Need User Defined Function sample

Similar Messages

Maybe you are looking for