Need User-Exit / Badi For CO11N selection screen

Hello Gurus,
I need to add an extra functionality in the selection screen of the Tcode CO11N .Can you suggest some user exit or badi for the same .
The Functionality is : We need to make the field 'Reason' as mandatory whenever there is an entry in the field 'Scarp' .
Waiting for your valuable suggestion on this .
Regards,
Abhijit Mandal

Hi,
Followings are Enhancement or BADI for Tcode-CO11N
CONFPP01                                PP order conf.: Determine customer specific default values
CONFPP02                                PP order conf.: Customer specific input checks 1
CONFPP03                                PP order conf.: Cust. specific check after op. selection
CONFPP04                                PP order conf.: Customer specific input checks 2
CONFPP05                                PP order conf.: Customer specific enhancements when saving
CONFPP06                                PP Order Confirmations: Actual Data Transfer
CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01                                PS confirmation: Determine customer specific default values
CONFPS02                                PS confirmation: Customer specific input checks 1
CONFPS03                                PS confirmation: Customer specific check after op. selection
CONFPS04                                PS confirmation: Customer specific input checks 2
CONFPS05                                PS confirmation: Customer specific enhancements when saving
CONF0001                                Enhancements in order confirmation
CONFPI01                                Process order conf.: Calculate cust.specific default values
CONFPI02                                Process order confirmation: Customer spec. input checks 1
CONFPI03                                Process order conf.: Cust. spec. check after op. selection
CONFPI04                                Process order conf.: Customer specific input checks 2
CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
CONFPI06                                Process order confirmation: Actual data transfer
CONFPM01                                PM/SM order conf.: Determine cust. specific default values
CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04                                PM/SM order conf.: Customer specific input check 2
CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
Regards.

Similar Messages

  • Need user exit, BAdI for acc. determination in PO-multiple a/c assignment

    Hi,
      I am looking for a user exit in ME21N transaction.
      In case of multiple account assignment, I need a user exit where I can calculate the percentage to split the item to post into different G/L accounts. The percentages need to be calculated based on custom configuration tables. The percentage and G/L Account should be defaulted on the screen. Even setting them during save may also be fine.
    Thanks.
    Srinivas.

    Hi,
    U can try this badi:
    ME_PROCESS_PO_CUST.

  • Need user-exit/BADI for my requirement in transaction CRMD_ORDER...

    Hello Experts,
    I was just given a development task under CRM module. The transaction that I would enhance
    would be CRMD_ORDER. What I need to do is that I need to check the customer class
    in table CRMM_BUT_FRG0041-classific if it falls under 09. If true, then search for the
    condition exclusion from the table PRCC_EXCL_PROC for a given combination and by checking the
    fields KAUGR1 and KUAGR2. If found, then bypass this exclusion for customer class 09 so that it will
    be given a trade discount and bypass the pricing procedure.
    Hope you can help me guys as I am fairly new to CRM module. Thank you and take care!

    Hi,
    You will have to put the required Logic there and test.
    But what I feel is you need to use IPC Pricing routines, which are assigned in the Pricing Procedure. They are java routines.
    According to my understanding, you will have to first check the customer class from table CRMM_BUT_FRG0041. If it is 09 than u read the condition exclusion groups, the condition type assigned and bypass it.
    Wish it helps.
    Regards,
    Shalini Chauhan

  • User Exit/Badi for G/L account assignment in ME21n/ME22n

    Hi All,
    I need user exit/badi for account assignment in item details for following requirement.
    If user changes G/L account of the first line item then I have to copy same G/L account to all line items.
    Please suggest me suitable user exit for this.

    hello,
    follow the steps.......
    For User Exit's
    goto to tcode->status->program name->double click on that,
    then goto to-> attribute take the package name and
    Goto SMOD tcode ->Utilities->give the package name and F8
    then a list of exits will display for that tcode as well as that package.
    u can check the table MODSAP
    For BADI's,
    1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
    keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
    then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
    2)Goto to tcode->status->program name->double click on that program will display's
    then  press crtl+F then cl_exithandler
    Thank u,
    santhosh

  • Need User exit/BADI or BTE for FF_5

    Hi,
    My requirement is to enhance the automatic clearing rules for tcode ff_5.
    Program RFEBKA00 will upload bank statement items based on the external transaction codes provided by the banks .
    The standard posting rules will clear a GL bank account using a set of algorithms for further interpretation
    set of standard algorithms do not meet the clearing criteria .hence i need user exit / badi/bte to enhance the automatic clearing rules.
    EXIT ZXF01U01& or FEB_BADI are triggering before posting the document.hence i think we can not use these.
    Please suggest me the alternate solution.

    Hi,
    We are facing a similar requirement. We are trying to enhance the interpretation logarithm using search string. The requirement is to update the text field with a Constant Prefix + a number from the Notes to Payee field. For e.g.:
    The BAI file transaction data is like:
    16,169,94906,V,120108,0000,6008ABS43400024460,783517/
    88,TBS EUROPE LTD   203647 10293164
    88,/ENTRY-06 FEB
    88,TRF/REF  6008ABS43400024475
    88,783517 BANK GIRO CREDIT
    We defined a search string to find the text 'TBS EUROPE LTD' and if it is found, the search string fetches the number '783517' from the Notes to Payee field and thereafter, at the time of posting, the text field has to be updated with '120108 TBS EUROPE LTD 783517', where 120108 is the validity date of the incoming money through this transaction and which does not form part of the Notes to Payee field.
    Also, if just the number '783517' has to be updated in the text field.
    Please suggest how to achieve this functionality.
    Thanks in advance.
    Regards
    Sourabh

  • In ME21N,User Exit/BADI for  Defaulting  Vendor number at item level.

    Hi Experts.
    In ME21N, for every purchase order, we have condtion tab for each line item.
    Many condition typesot taxes  are listed based on the config for the materials.
    My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
    I need a user exit/BADI for defaulting the Vendor number.
    Regards
    Balaji R

    Hi,
    check with below link,
    fo this one you will find both user exit and badis
    https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
    Regards,
    Madhu

  • User exit / badi for transaction appcreate

    Hi,
      Can nyone help me in getting user exit / badi for transaction appcreate .
    Cheers
    kamlesh

    Hi Kamlesh,
    Try below code to know the userexits for the given trxn code.
    Regards,
    Raj
    *& Report  ZTESTRAJ_USEREXITS
    REPORT  ztestraj_userexits
            NO STANDARD PAGE HEADING
            LINE-SIZE 200
            MESSAGE-ID zz.
           T A B L E    D E C L A R A T I O N S                          *
    TABLES: tftit,
            e071,
            e070.
                  S T R U C T U R E  D E C L A R A T I O N S             *
    TYPES: BEGIN OF x_tstc,
            tcode TYPE tcode,
            pgmna TYPE program_id,
           END OF x_tstc.
    TYPES: BEGIN OF x_tadir,
            obj_name TYPE  sobj_name,
            devclass TYPE devclass,
           END OF x_tadir.
    TYPES: BEGIN OF x_slog,
            obj_name TYPE sobj_name,
           END OF x_slog.
    TYPES: BEGIN OF x_final,
            name TYPE smodname,
            member TYPE modmember,
            include(15),            "Include name
           END OF x_final.
           I N T E R N A L    T A B L E    D E C L A R A T I O N S       *
    DATA: it_tstc  TYPE STANDARD TABLE OF x_tstc  WITH HEADER LINE.
    DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
    DATA: it_jtab  TYPE STANDARD TABLE OF x_slog  WITH HEADER LINE.
    DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
               V A R I A B L E S      D E C L A R A T I O N S            *
                    U S E R   I N P U T S   S C R E E N                  *
                      S E L E C T I O N    S C R E E N                   *
    SELECTION-SCREEN:  BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
    PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
    SELECTION-SCREEN END OF BLOCK blk01.
                    S t a r t    o f    S e l e c t i o n                *
    START-OF-SELECTION.
      PERFORM get_tcodes.  "Get Tcodes
      PERFORM get_objects. "Get Objects
                    E n d    o f    S e l e c t i o n                    *
    END-OF-SELECTION.
      PERFORM display_results. "Display Results
    *&      Form  get_tcodes
          Get Tcodes
    FORM get_tcodes.
      SELECT tcode
             pgmna
         INTO TABLE it_tstc
         FROM tstc
         WHERE tcode = p_tcode.
      IF sy-subrc = 0.
        SORT it_tstc BY tcode.
      ENDIF.
    ENDFORM.                    " get_tcodes
    *&      Form  get_objects
          Get Objects
    FORM get_objects.
      DATA: l_fname LIKE rs38l-name,
            l_group LIKE rs38l-area,
            l_include LIKE rs38l-include,
            l_namespace LIKE rs38l-namespace,
            l_str_area LIKE rs38l-str_area.
      DATA: v_include LIKE rodiobj-iobjnm.
      DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
      DATA: l_line TYPE string,
            l_tabix LIKE sy-tabix.
      IF NOT it_tstc[] IS INITIAL.
        SELECT obj_name
               devclass
            INTO TABLE it_tadir
            FROM tadir FOR ALL ENTRIES IN it_tstc
            WHERE pgmid = 'R3TR' AND
                  object = 'PROG' AND
                  obj_name = it_tstc-pgmna.
        IF sy-subrc = 0.
          SORT it_tadir BY obj_name devclass.
          SELECT obj_name
            INTO TABLE it_jtab
            FROM tadir FOR ALL ENTRIES IN it_tadir
            WHERE pgmid = 'R3TR' AND
                  object = 'SMOD' AND
                  devclass = it_tadir-devclass.
          IF sy-subrc = 0.
            SORT it_jtab BY obj_name.
          ENDIF.
        ENDIF.
      ENDIF.
    *- Get UserExit names
      LOOP AT it_jtab.
        SELECT name
               member
           INTO (it_final-name, it_final-member)
           FROM modsap
           WHERE name = it_jtab-obj_name AND
                 typ  = 'E'.
          APPEND it_final.
          CLEAR  it_final.
        ENDSELECT.
      ENDLOOP.
    *- Process it_final contents.
      LOOP AT it_final.
        l_tabix = sy-tabix.
        CLEAR: l_fname,
             l_group,
             l_include,
             l_namespace,
             l_str_area.
        l_fname = it_final-member.
        CALL FUNCTION 'FUNCTION_EXISTS'
          EXPORTING
            funcname           = l_fname
          IMPORTING
            group              = l_group
            include            = l_include
            namespace          = l_namespace
            str_area           = l_str_area
          EXCEPTIONS
            function_not_exist = 1
            OTHERS             = 2.
        IF sy-subrc = 0.
          IF NOT l_include IS INITIAL.
    *- Get Source code of include.
            CLEAR: v_include, e_t_include, e_t_include[].
            v_include = l_include.
            CALL FUNCTION 'MU_INCLUDE_GET'
              EXPORTING
                i_include   = v_include
              TABLES
                e_t_include = e_t_include.
            IF sy-subrc = 0.
              LOOP AT e_t_include.
                IF e_t_include-line CS 'INCLUDE'.
                  CLEAR l_line.
                  l_line = e_t_include-line.
                  CONDENSE l_line NO-GAPS.
                  TRANSLATE l_line USING '. '.
                  l_line = l_line+7(9).
                  it_final-include = l_line.
                  MODIFY it_final INDEX l_tabix TRANSPORTING include.
                ENDIF.
              ENDLOOP.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    " get_objects
    *&      Form  display_results
          Display Results
    FORM display_results.
      FORMAT COLOR COL_HEADING.
      WRITE:/1(150) sy-uline.
      WRITE:/ sy-vline,
            2(23) 'Extension Name',
            24 sy-vline,
            25(39) 'Exit Name',
            64 sy-vline,
            65(74) 'Description',
            140 sy-vline,
            141(9) 'Include',
            150 sy-vline.
      WRITE:/1(150) sy-uline.
      FORMAT RESET.
      SORT it_final BY name member.
      LOOP AT it_final.
        CLEAR tftit.
        SELECT SINGLE  stext
          INTO tftit-stext
          FROM tftit
          WHERE spras = 'EN' AND
                funcname = it_final-member.
        WRITE:/ sy-vline,
                it_final-name COLOR COL_KEY, 24 sy-vline,
                25 it_final-member, 64 sy-vline,
                65 tftit-stext, 140 sy-vline,
                141 it_final-include, 150 sy-vline.
        WRITE:/1(150) sy-uline.
      ENDLOOP.
    ENDFORM.                    " display_results

  • User-Exits/Badis for T.Code Co01 Production Order

    Hi Friends,
    Please can any one give the User-Exits/ Badis For Co01 , I need to link the Material with Documents....
    Thanks,
    Ravi...........

    These are the available user exits..
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines

  • Request for info. on USER EXIT/BADI for FB60

    Hi,
    This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
    ]Please guide some alternative solution rather than user exit and badi.
    I dont think the following user exit and badi are used for withholding tax.
    I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
    F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
    F050S002 FIDCC1: Change IDoc/do not send
    F050S003 FIDCC2: Change IDoc/do not send
    F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
    F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
    F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
    F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
    F180A001 Balance Sheet Adjustment
    FARC0002 Additional Checks for Archiving MM Vendor Master Data
    FEDI0001 Function Exits for EDI in FI
    RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
    RFEPOS00 Line item display: Checking of selection conditions
    RFKORIEX Automatic correspondence
    SAPLF051 Workflow for FI (pre-capture, release for payment)
    Badi
    FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
    Every expert answer will be rewarded.
    Thanks in advance
    Cra

    Try Business Transaction Events. Transaction code BERP.
    Regards,
    Zoltá

  • User Exit / BADI for  F-02 during SAVE to update BSEG Line Items.

    Hi Experts,
    I need a User Exit / BADI for Transaction code F-02 which triggers during save to update  BSEG-SGTXT with Vendor / Customer 
    name in the Tax Line Item.This is to update table BSEG .
    Thanks in Advance,
    Nithy

    Hi,
    Do it with the BTE 00001120 (tcode FIBF).
    I hope this helps you
    Regards,
    Eduardo
    PD: I forgot, check this link. It will tell you how to do it
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
    Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

  • User exit/BADI for Deleting the Empty Handling unit

    Hi All,
    Can anyone give me the suitable User exit/BADI for the below scenario.
    While creating the TO (Transfer order) for a delivery using the transaction code LT12, the system will automatically generate HU (Handling unit) number. If the materials are not found in the storage bin for the selected HU, we have to delete the Handling Unit from the delivery document.
    Thanks in advance.
    Thanks
    Ramesh.

    Find below couple of  User Exits for Transfer Order.
    MWMTO001 - EXIT_SAPLL03T_001 (Enhancements for end of transfer order generation)
    MWMTO002 - EXIT_SAPLL03T_002 (User Exit at End of TO Confirmation (in Update Task))
    The Exits gives you access to LTAK and LTAP.....
    Hope this is helpful to you.
    Vinodh Balakrishnan

  • User Exit & BADI for controling the END user in co06

    Hi
    I HAVE SOME 2 DOUBTS
    1.  I  need a user exit /  BADI  for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
    the control should be actve for specfic order type for specfic users
    2  DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

    Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

  • User Exit / BADI for Transaction IW31 to create a POP-UP.

    Hi,
    I need to have a POP-UP Message in transaction IW31 on the press of ENTER. Could you give me the name of the EXIT or BADI which can be used for this purpose.

    Hi!
    In IW31/IW32, there is no user-exit/badi for pressing Enter. User-exits are attached to well determined event (enabling, closing, saving the order and so on).
    If you wanted to solve it, it seems, you have to modify the standard COIH function group. Use SE80 transaction for it. The first dynpro is 3000.
    Regards
    Tamá

  • USER-EXIT/BADI for "MIRA"

    Hello Gurus,
    My requirement is that I need to change an Invoice Line Item data before the actual posting in Background via Program RMBABG00.
    It would be great if somebody could please tell me, is there any USER-EXIT / BADI for doing the above mentioned task.
    I will be really helpful as it is very urgent!!!!!
    Thanks in advance

    Hi,
    these user exits avialable for Tcode MIRA...
    LMR1M001            User exits in Logistics Invoice Verification
    LMR1M002            Account grouping for GR/IR account maintenance
    LMR1M003            Number assignment in Logistics Invoice Verification
    LMR1M004            Logistics Invoice Verification: item text for follow-on docs
    LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
    LMR1M006            Logistics Invoice Verification: Process XML Invoice
    MRMH0001            Logistics Invoice Verification: ERS procedure
    MRMH0002            Logistics Invoice Verification: EDI inbound
    MRMH0003            Logistics Invoice Verification: Revaluation/RAP
    MRMN0001            Message output and creation: Logistics Invoice Verification
    regds,
    paras

  • User exit / BADI for CO01

    Hi all,
    I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
    Thanks and regards
    Jijo

    Exit Name           Description
    CCOWB001            Customer exit for modifying menu entries
    COIB0001            Customer Exit for As-Built Assignment Tool
    COZF0001            Change purchase req. for externally processed operation
    COZF0002            Change purchase req. for externally procured component
    PPCO0001            Application development: PP orders
    PPCO0002            Check exit for setting delete mark / deletion indicator
    PPCO0003            Check exit for order changes from sales order
    PPCO0004            Sort and processing exit: Mass processing orders
    PPCO0005            Storage location/backflushing when order is created
    PPCO0006            Enhancement to specify defaults for fields in order header
    PPCO0007            Exit when saving production order
    PPCO0008            Enhancement in the adding and changing of components
    PPCO0009            Enhancement in goods movements for prod. process order
    PPCO0010            Enhancement in make-to-order production - Unit of measure
    PPCO0012            Production Order: Display/Change Order Header Data
    PPCO0013            Change priorities of selection crit. for batch determination
    PPCO0015            Additional check for document links from BOMs
    PPCO0016            Additional check for document links from master data
    PPCO0017            Additional check for online processing of document links
    PPCO0018            Check for changes to production order header
    PPCO0019            Checks for changes to order operations
    PPCO0021            Release Control for Automatic Batch Determination
    PPCO0022            Determination of Production Memo
    PPCO0023            Checks Changes to Order Components
    STATTEXT            Modification exit for formatting status text lines

Maybe you are looking for