Need user-exit/BADI for my requirement in transaction CRMD_ORDER...

Hello Experts,
I was just given a development task under CRM module. The transaction that I would enhance
would be CRMD_ORDER. What I need to do is that I need to check the customer class
in table CRMM_BUT_FRG0041-classific if it falls under 09. If true, then search for the
condition exclusion from the table PRCC_EXCL_PROC for a given combination and by checking the
fields KAUGR1 and KUAGR2. If found, then bypass this exclusion for customer class 09 so that it will
be given a trade discount and bypass the pricing procedure.
Hope you can help me guys as I am fairly new to CRM module. Thank you and take care!

Hi,
You will have to put the required Logic there and test.
But what I feel is you need to use IPC Pricing routines, which are assigned in the Pricing Procedure. They are java routines.
According to my understanding, you will have to first check the customer class from table CRMM_BUT_FRG0041. If it is 09 than u read the condition exclusion groups, the condition type assigned and bypass it.
Wish it helps.
Regards,
Shalini Chauhan

Similar Messages

Need user exit, BAdI for acc. determination in PO-multiple a/c assignment

Hi,
I am looking for a user exit in ME21N transaction.
In case of multiple account assignment, I need a user exit where I can calculate the percentage to split the item to post into different G/L accounts. The percentages need to be calculated based on custom configuration tables. The percentage and G/L Account should be defaulted on the screen. Even setting them during save may also be fine.
Thanks.
Srinivas.

Hi,
U can try this badi:
ME_PROCESS_PO_CUST.

User Exit / BADI for Transfer Requirement Create

Hi All,
I have looked into the system and i could not find any User Exit or BADI for creation of Transfer requirement. This is for manual creation through LB01 and not interface with PP or IM. I am aware of the Userexits available for those, but i could not find any for WM TR Manual creation.
Let me know if you are aware of any.
Thanks
Jithin

When you create a transfer requirement, i want to make it mandatory to enter the destination bin, for example. The Transfer Requirement should not be saved if it is not entered.
I know we can do this by creating multiple movement types for each destination, but i want to know if there is a way where the user can enter the destination when creating a TR with a single movement type.
Jithin

Need User-Exit / Badi For CO11N selection screen

Hello Gurus,
I need to add an extra functionality in the selection screen of the Tcode CO11N .Can you suggest some user exit or badi for the same .
The Functionality is : We need to make the field 'Reason' as mandatory whenever there is an entry in the field 'Scarp' .
Waiting for your valuable suggestion on this .
Regards,
Abhijit Mandal

Hi,
Followings are Enhancement or BADI for Tcode-CO11N
CONFPP01                                PP order conf.: Determine customer specific default values
CONFPP02                                PP order conf.: Customer specific input checks 1
CONFPP03                                PP order conf.: Cust. specific check after op. selection
CONFPP04                                PP order conf.: Customer specific input checks 2
CONFPP05                                PP order conf.: Customer specific enhancements when saving
CONFPP06                                PP Order Confirmations: Actual Data Transfer
CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01                                PS confirmation: Determine customer specific default values
CONFPS02                                PS confirmation: Customer specific input checks 1
CONFPS03                                PS confirmation: Customer specific check after op. selection
CONFPS04                                PS confirmation: Customer specific input checks 2
CONFPS05                                PS confirmation: Customer specific enhancements when saving
CONF0001                                Enhancements in order confirmation
CONFPI01                                Process order conf.: Calculate cust.specific default values
CONFPI02                                Process order confirmation: Customer spec. input checks 1
CONFPI03                                Process order conf.: Cust. spec. check after op. selection
CONFPI04                                Process order conf.: Customer specific input checks 2
CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
CONFPI06                                Process order confirmation: Actual data transfer
CONFPM01                                PM/SM order conf.: Determine cust. specific default values
CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04                                PM/SM order conf.: Customer specific input check 2
CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
Regards.

User Exit/Badi for G/L account assignment in ME21n/ME22n

Hi All,
I need user exit/badi for account assignment in item details for following requirement.
If user changes G/L account of the first line item then I have to copy same G/L account to all line items.
Please suggest me suitable user exit for this.

hello,
follow the steps.......
For User Exit's
goto to tcode->status->program name->double click on that,
then goto to-> attribute take the package name and
Goto SMOD tcode ->Utilities->give the package name and F8
then a list of exits will display for that tcode as well as that package.
u can check the table MODSAP
For BADI's,
1)goto to tcode SE24 give the CL_EXITHANDLER and display and then double click on the GET_INSTANCE
keep Break point at this location 'call method cl_exithandler=>get_class_name_by_interface'
then the tcode it will trigger there and we can debugg there we can find badi'for that tcode and then remove the break point.
2)Goto to tcode->status->program name->double click on that program will display's
then press crtl+F then cl_exithandler
Thank u,
santhosh

Need User exit/BADI or BTE for FF_5

Hi,
My requirement is to enhance the automatic clearing rules for tcode ff_5.
Program RFEBKA00 will upload bank statement items based on the external transaction codes provided by the banks .
The standard posting rules will clear a GL bank account using a set of algorithms for further interpretation
set of standard algorithms do not meet the clearing criteria .hence i need user exit / badi/bte to enhance the automatic clearing rules.
EXIT ZXF01U01& or FEB_BADI are triggering before posting the document.hence i think we can not use these.
Please suggest me the alternate solution.

Hi,
We are facing a similar requirement. We are trying to enhance the interpretation logarithm using search string. The requirement is to update the text field with a Constant Prefix + a number from the Notes to Payee field. For e.g.:
The BAI file transaction data is like:
16,169,94906,V,120108,0000,6008ABS43400024460,783517/
88,TBS EUROPE LTD 203647 10293164
88,/ENTRY-06 FEB
88,TRF/REF 6008ABS43400024475
88,783517 BANK GIRO CREDIT
We defined a search string to find the text 'TBS EUROPE LTD' and if it is found, the search string fetches the number '783517' from the Notes to Payee field and thereafter, at the time of posting, the text field has to be updated with '120108 TBS EUROPE LTD 783517', where 120108 is the validity date of the incoming money through this transaction and which does not form part of the Notes to Payee field.
Also, if just the number '783517' has to be updated in the text field.
Please suggest how to achieve this functionality.
Thanks in advance.
Regards
Sourabh

User Exit/ BADI for ME01- Sourcelist creation

Hiii
We need a place exit/ BADi to do vendor validation before saving soource list in transaction ME01.
Please provide suitable exit / badi for above requirement.
Thanks ...in advance.!!
Regards,
Nilesh

EXIT_SAPLMBMP_003     AMPL0001     User subscreen for additional data on AMPL
EXIT_SAPLMEKO_001     LMEKO001     Extend communications structure KOMK for pricing
EXIT_SAPLMEKO_002     LMEKO002     Extend communications structure KOMP for pricing
EXIT_SAPLMEQR_001     LMEQR001     User exit for source determination
EXIT_SAPLMEQR_001     LMEQR001     User exit for source determination
EXIT_SAPLQBCK_002     QBCK0002     Extended check in procurement

In ME21N,User Exit/BADI for Defaulting Vendor number at item level.

Hi Experts.
In ME21N, for every purchase order, we have condtion tab for each line item.
Many condition typesot taxes are listed based on the config for the materials.
My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
I need a user exit/BADI for defaulting the Vendor number.
Regards
Balaji R

Hi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu

USER-EXIT/BADI for "MIRA"

Hello Gurus,
My requirement is that I need to change an Invoice Line Item data before the actual posting in Background via Program RMBABG00.
It would be great if somebody could please tell me, is there any USER-EXIT / BADI for doing the above mentioned task.
I will be really helpful as it is very urgent!!!!!
Thanks in advance

Hi,
these user exits avialable for Tcode MIRA...
LMR1M001            User exits in Logistics Invoice Verification
LMR1M002            Account grouping for GR/IR account maintenance
LMR1M003            Number assignment in Logistics Invoice Verification
LMR1M004            Logistics Invoice Verification: item text for follow-on docs
LMR1M005            Logistics Inv. Verification: Release Parked Doc. for Posting
LMR1M006            Logistics Invoice Verification: Process XML Invoice
MRMH0001            Logistics Invoice Verification: ERS procedure
MRMH0002            Logistics Invoice Verification: EDI inbound
MRMH0003            Logistics Invoice Verification: Revaluation/RAP
MRMN0001            Message output and creation: Logistics Invoice Verification
regds,
paras

User Exit/Badi for VF01

Hi all,
I'm trying do find a user-exit/badi for t-code VF01, that allows me to change at the same time,some fields, of the header structure VBRK and items structure VBRP (all the items available). Until now, all the user-exits i've tried dont allow me to change both structures at the same time, neither badi (SD_CIN_LV60AU02). Regards,
PCastro

Hi,
may be you are trying to chage the some other BADI. to find the exact BADI, follow this procedure.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction
if you follow this 7 steps, you will find a suitable BADI.
pl reward if it helps.
Thanks & Regards
Sadhu Kishore

User Exit / BADI for F-02 during SAVE to update BSEG Line Items.

Hi Experts,
I need a User Exit / BADI for Transaction code F-02 which triggers during save to update BSEG-SGTXT with Vendor / Customer
name in the Tax Line Item.This is to update table BSEG .
Thanks in Advance,
Nithy

Hi,
Do it with the BTE 00001120 (tcode FIBF).
I hope this helps you
Regards,
Eduardo
PD: I forgot, check this link. It will tell you how to do it
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

User Exit & BADI for controling the END user in co06

Hi
I HAVE SOME 2 DOUBTS
1. I need a user exit / BADI for controlling the user to edit a specific document type in co06 (BACKORDER PROCESSING) .
the control should be actve for specfic order type for specfic users
2 DEPENDS ON ORDER TYPE I NEED TO CONTROL THE ALLOCATION , AND HOW TO CHECK THE SAFETY STOCK

Answer cannot be Provided properly , so has to Post more questions . i am jus closing my ques??

User Exit / BADI for Transaction IW31 to create a POP-UP.

Hi,
I need to have a POP-UP Message in transaction IW31 on the press of ENTER. Could you give me the name of the EXIT or BADI which can be used for this purpose.

Hi!
In IW31/IW32, there is no user-exit/badi for pressing Enter. User-exits are attached to well determined event (enabling, closing, saving the order and so on).
If you wanted to solve it, it seems, you have to modify the standard COIH function group. Use SE80 transaction for it. The first dynpro is 3000.
Regards
Tamá

User exit / BADI for CO01

Hi all,
I have a requirement to display Requirement. Plan number: (PLAF-PBDNR) in Co01/02/03. Anyone knows user exit / badi for the same ?
Thanks and regards
Jijo

Exit Name           Description
CCOWB001            Customer exit for modifying menu entries
COIB0001            Customer Exit for As-Built Assignment Tool
COZF0001            Change purchase req. for externally processed operation
COZF0002            Change purchase req. for externally procured component
PPCO0001            Application development: PP orders
PPCO0002            Check exit for setting delete mark / deletion indicator
PPCO0003            Check exit for order changes from sales order
PPCO0004            Sort and processing exit: Mass processing orders
PPCO0005            Storage location/backflushing when order is created
PPCO0006            Enhancement to specify defaults for fields in order header
PPCO0007            Exit when saving production order
PPCO0008            Enhancement in the adding and changing of components
PPCO0009            Enhancement in goods movements for prod. process order
PPCO0010            Enhancement in make-to-order production - Unit of measure
PPCO0012            Production Order: Display/Change Order Header Data
PPCO0013            Change priorities of selection crit. for batch determination
PPCO0015            Additional check for document links from BOMs
PPCO0016            Additional check for document links from master data
PPCO0017            Additional check for online processing of document links
PPCO0018            Check for changes to production order header
PPCO0019            Checks for changes to order operations
PPCO0021            Release Control for Automatic Batch Determination
PPCO0022            Determination of Production Memo
PPCO0023            Checks Changes to Order Components
STATTEXT            Modification exit for formatting status text lines

User Exit / Badi For CJ37, CJ34, CJ38

I want user Exit / Badi For CJ37, CJ34, CJ38 which will execute whenever there is any change for WBS budget (supplement / transfer / return) regardless WBS have assigned values.
This is required to trigger my Workflow.
Available Exit which i know is EXIT_SAPLBPFC_002 is executing only when WBS have assigned values otherwise not.
PLease reply ASAP.

Even you can search all exit and BADI:
https://www.sdn.sap.com/irj/scn/advancedsearch?cat=sdn_all&query=howtofinduserexitandbadi&adv=false&sortby=cm_rnd_rankvalue

Need user-exit/BADI for my requirement in transaction CRMD_ORDER...

Similar Messages

Maybe you are looking for