Need Userexit/Badi after save while creating invoice at VF01

Hi expert,
Can anyone tell me which BADI / USEREXIT i can use for update the custom table
after save while creting invoice at VF01.
Regards,
Manasi

Manasi,
from next time onwards please post it in relevant forums
for now check these links
USSER-EXIT creating the invoice in VF01
Re: user exit at invoice creation Vf01/Vf04
VF01/VF04 user exit
Thanks
Bala Duvvuri

Similar Messages

  • Problem while creating INVOIC idoc

    Dear All,
    I am facing a error messege while creating INVOIC(using MIRO transaction) idoc through EDI for a partner(vendor).
    In MIRO transaction after selecting one Item I clicked GoTo>Messege>Item
    Then I selected output type (Z output type) , Medium EDI,  Function VN ,Partner number (say 123) language EN.
    After that when I presse enter I am geting a messege "Partner 123 does not exist for partner function LF".
    All the configuration is done including partner profile for 123(partner type is LI).
    Please let me know what is the reason for this error. Do i need to make any changes in configuration?
    Regards
    Arindam

    Go to BD54 and maintain table view for ur partner type  
    hope this helps u..
    Thanks,
    Anil
    Edited by: anil sasidharan on Apr 17, 2009 11:42 AM

  • Error while creating Invoice

    Hi Experts,
    While Creating Invoice i am getting below error
    G/L account 0001 11002 cannot be posted to, please correct your entry
    Message no. >0205
    Diagnosis
    This G/L account is blocked against posting or is a reconciliation account and cannot be posted to directly.
    System Response
    The G/L account cannot be posted to.
    Procedure for System Administration
    Check you entry for errors, or change the master record of the G/L account: Proceed.
    I have taken lot of experts advises, but unable to solve. I have checked FS00, EK01 and EK02 and unable to find what problem is with these Tcodes.
    When i was trying to check Tcode FS00 i found G/L Account is "11002 - Constructions" and when i tried to see account group it was Balance Sheet Account and by experts advise i changed it to P&L Statement Acct, when i am opening Initially after saving Account Grp.Tcode FS00 it is showing Acct. Grp. as P&L Statement Acct and when i am choosing other tabs in FS00 the Acct Grp is Changing back to Balance sheet acct.. I am unable to find what wrong with this.
    I want to ask whether the problem is with above mentioned thing or with other, i believe i have explained my error in detail. Please advise how can i overcome this error.
    Regards,
    Kushal
    Moderator note - thread locked, same issue identified in G/L error while posting an amount - TXN: FPE1 - SAP ISU and Error while trying to do Billing

    Hi friends,
    The error thats triggered is "For object RV_BELEGnumber range 19 does not exist".
    I have deleted all the existing no ranges in VN01 and customized the nuber range for invoice doc and set it at Z1(Internal no range :1000-1999) and the existing no range entry in OBA7 for RV is 18(1800000000- 1899999999).
    Z1(Internal no range :1000-1999)  for Invoices
    Z2(Internal no range :2000-2999)  for Deliveries
    Z3 (Internal no range :3000-3999) for sales orders
    So my VN01 entries consists of Z1(Internal no range :1000-1999) ,Z2(Internal no range :2000-2999)  ,Z3 (Internal no range :3000-3999) .
    The sales orders and deliveries are working out fine but while generating the invoice its triggering the above message.
    Pl help on this.
    Thanks
    Ivy

  • Payment release function inactive while creating invoice through FB60

    Hi,
    I am getting message while creating invoice through FB60 as "Payment release function inactive".
    When I select "Free for payment" after going in payment tab, that time only system is allowing me to go further.
    Is there any  mistake I am doing?
    Pls suggest.
    Thanks,
    Taral Patel

    Hi,
    Check in vendor master in FD02 > Company Code Data > Payment Transactions, whether the payment block is active there or not?
    Also check in OBB8 transaction whether any payment block key is linked to the payment term which is being used in the vendor master.
    Regards,
    Gaurav

  • Problem while creating Invoice

    Hi all,
           I am trying to create an invoice in BusinessOne using DI API. While creating invoice i am facing "Exchange Rate not Update "USD" " Error.
                   In BusinessOne Foreign Exchange Rate was given for the docDate. Still i am getting the same error. I am able to create the Invoice from the BusinessOne UI.It is not throwing any Error.  What may be the error. What are the cases for the above error. When this error will occur?
       Thanks in Advance,
    Ramu.

    Hi Ramu,
    Don't set the doc date property of the document. This is system related. Try to add it through the DI API - if is still fails don't set the due date property of the document. This is system calculated...

  • Need userexit / badi / bte to enhance the automatic clearing rules

    Dear All,
    My requirement is to enhance the automatic clearing rules for tcode ff_5.
    Program RFEBKA00 will upload bank statement items based on the external transaction codes provided by the banks .
    The standard posting rules will clear a GL bank account using a set of algorithms for further interpretation set of standard algorithms do not meet the clearing criteria.
    Hence I need userexit / badi / bte to enhance the automatic clearing rules. EXIT ZXF01U01 / FEB_BADI are triggering before posting the document.
    So we cannot use these. Please suggest me regarding the same.
    Thanks in advance
    Somu.

    Hi,
           Did you get a solution for this problem from any other means? Cause I am also facing the same problem. It will be great if you can  help me in this regard.
    Thanks
    Sudheer K

  • Bank account number not reflecting while creating invoice some parties

    Hi All,
    We are facing following issue while creating invoice's for some particular parties.
    Bank account number is not reflecting while creating invoice at invoice work bench from front end. Bank account details are properly attached at party site level.
    Kindly guide us regarding this.
    Thanks,

    Hi Team,
    If you are getting XXXX in place of Bank number then the issue is at (Setup > Payment >Payment Adminstrator).
    Log into Payments Setup > Shared Setup > System Security Options. Now you will find "External Bank Account Masking Setting" & Number of Digits to Disp . Now provide the numer of digits to display.
    Thanks
    Vinod K

  • Item Quantity not Copied exactly from sales order while creating Invoice

    Hi Experts,
    at
    My Functional Guy encountered a strange problem while creating Invoice from Sales Document.Actually there are 6 line material items in the order and the sixth line item is having a quantity of 8EA While trying to generate an invoice from sales order the sixth line item billed quantity gets converted to 70EA automatically  in the invoice .This only happens with the sixth line item and the remaining all are fine.I have checked OSS Notes and could not get a.ny fruitful results.Please let me know if you have any suggestions.I also checked with the functional guy whether its the problem due to copy controls.But everything is fine.Please help
    Best regards,
    Lakshman

    Are your invoices combing multiple delivery line items based upon copy control/invoice split/combine configuration settings?
    If your order was for 8 and you delivered 8, and there is no conversion for units, and the only quantity being included is for a single order line and delivery line, then there must be an error in customer-written exit or enhancement code that you have yet to find.  What do you see in debug when the data for this line is being collected and set?
    Edited by: DaveL on Sep 6, 2011 4:19 PM

  • Error while saving invoice in VF01

    Hi,
    I am facing problem while saving invoice in VF01 for 1 company code, while no problem occurs when save for other company code.
    Text 0040300000 ID 0002 language EN not found
    Message no. TD600
    Diagnosis
    You want to read a text which does not exist in the data base (or update memory).
    System Response
    Reading could not be carried out.
    Procedure
    You need to create this text:
    1. Initialization (module INIT_TEXT)
    2. Save (module SAVE_TEXT)
      403 is my company code
      wat i m missing here
    Regards,
    AMit

    I hope below links may help you to close the thread.
    Service master Long Text Deletion
    Text Id F01 language EN not found message no TD600
    Text id not found
    Regards,
    SaiRam

  • BADI after shoppingcart is created/changed

    Hi Guys,
       I need BADI which will trigger whenever shopping cart is created/changed successfully.  Could you please let me know if you know the BADI at this event.
    Regards,
    Ganesh

    Thanks Pradeep.
    But BADI BBP_DOC_CHANGE_BADI is get triggered after user entry and before saving the document to the database. But I need BADI after shopping cart is saved in DB. Same thing in case of shopping cart is creation.
    Regards.
    Ganesh

  • How to write error log while creating invoice and avoid implicite commit

    Hi,
    I've have written code in exit RV60AFZZ in which I check for some possible errors while invoicing via VF01/VF04. If conditions are met then we create error message and display it to the user. As result we had a lot of missing SD invoices in FI when we did batch/mass invoicing. I've opened OSS note and SAP support team wrote that using statement MESSAGE is forbidden in UE. It can lead to implicite commits.
    Do you have some example how to write error log for invoincing in VF01/VF04 transactions?
    Thanks

    @ sri nath. Please read post before answering. I wouldn't be posting trivial questions. As I wrote before it doesn't work.  Also SAP support would not answer to the question in my OSS.
    In VOFM, SAP is using routine  VBFS_HINZUFUEGEN_ALLG to write to error log.
    Mine is something like this in ue:
          PERFORM ZVBFS_HINZUFUEGEN_ALLG
                     USING VBAP-VBELN VBAP-POSNR  'ZSD' 'E '600'
                           SPACE SPACE SPACE SPACE.
    (we have custom message class)
    As result  XVBFS and VBSK are filled with error, but posting is also done.  Error log is filled but invoice is created and posted in FI.
    That is not OK.
    thanks

  • Unknown user name or bad password issue while creating AD accounts

    Hi All,
    While creating accounts on AD through IdM, I am getting below error. Sometimes I don't see this error while sometimes I do. What could be the actual reason ?
    com.waveset.util.WavesetException: Error opening object 'LDAP://cn=ut9778ug,ou=Employee USA,ou=Users,ou=CorpHQ,dc=corpz,dc=utcz,dc=com': ADsOpenObject(): 0X8007052E: , , Logon failure: unknown user name or bad password.
    Please help me out.
    Thanks,

    Hi,
    I just faced the same problem while provisionning account on AD through Sun Identity Manager Gateway. (I'm in Oracle Waveset 8 patch 6)
    When I test configuration on the configuration page of my AD resource, everything was ok, but when i tried to create / update account on AD, i had the same error. (when i forced a bad password for example, the test configuration was in error, so i know that was ok)
    I resolved the problem using IP address in "LDAP Server Name" instead of url or host name. I don't understand because 'ping' on url and test configuration on resource were ok.
    I hope it will be usefull for you
    Nicolas

  • Err: Budget Exceeded(when int.order changed in asset) while creating invoic

    Hi All,
    Hope you are all doing wonderfull !
    We have created a statistical order type and wanted to assign them to assets as we don't wanna settle thoze expenses,but needed only for statistical purpose.
    It was okay, when we have changed them in asset master. However, we could not change them in already existing PO's, so when we are trying to create Invoices for the PO's having old internal order number, it is shooting us an error " item xxx order xxxxxx budget exceeded?
    Please let me know how to proceed further to clear this problem.
    Thanks
    Sri

    Hi Sri,
    Can you please elaborate a bit on your scenario. Have you assigned an internal order in asset master record.
    The internal order in asset master record has different purpose. It is used when you want to post depreciation of that asset to internal order.
    Regards
    Chetan.

  • Badi/Enhancement to while creating a transport request

    Hi Friends,
    Please let me know if there any enhancement or Badi while creating a transport request to add a additional field while creating a transport request.
    I found below list of badis but are not relevant to my requirement
    CTS_EXPORT_FEEDBACK
    CTS_IMPORT_FEEDBACK
    CTS_INT_REQUEST_CHCK
    CTS_REQUEST_CHECK
    CTS_TASKDOC_TEMPLATE
    Thanks in advance

    solution removed, not correct.
    Edited by: vishal kapoor on Nov 28, 2008 2:41 PM

  • Reg;error message while creating invoice

    Hi Gurus,
    When i am trying to create invoice with reference to sales order (order related billing ) its giving error massege when trying to save the invoice.Its giving the message as:FOR OBJECT RV_BELEG NUMBER RANGE 41 DOES NOT EXIST.
    How to correct this.Pls help me out on this.
    Thanks & Regards,
    Sash.

    Hi Kiran,i assigned number range as u said.But still its giving the same error mesage .See the error in below.
    For object RV_BELEG , number range interval 41 does not exist
    Message no. NR751
    Diagnosis
    The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
    Procedure
    Create the missing number range interval in customizing.
    Transaction code:

Maybe you are looking for