Need userexit while saving the billing document (VF01)

HI Folks,
I need a userexit while saving the VF01 transaction code. My requirement is i need to check if there is any intercompany invoice was created before the delivery related invoice
By default SAP creates delivery related invoice . I have checked lot of userexits with package VF but none is working and also gone through the standard userexits RV60AFZ*, still didn't find any good one for my requirement..
All your help is highly appreciated..
waiting for your replies.
Regards,
raj

Hi,
I have done some analysis before posting the question and one mistake i done is i have checked theUSEREXIT RV60AFZC and i checked XVBRK AND XVBRP instead of VBRK and VBRP...also whie saving this is not called, it is called when we press enter and also when we press SAVE button in the initial screen.
I missed the small thing...
Thanks for the link..
Regards,
Nagaraj

Similar Messages

Userexit while saving the billing document

Hi all,
Is there any userexit while saving the billing document..I want to define minimum invoice value in system.
Regards,
Puneet Makkar

Hi,
In preceding project, i had the same requirement.
Price condition : copy from std price for minimum value.
Use condition category (for specific determination price for invoice).
In price procedure : apply requirement to active only for invoice (std = 22).
Re determination of price during creation of invoice :
use RV61AFZA with the value of condition category to adapt pricing type (ex : X).
modify copy rule (Tcode VTFL) for item : use new value for pricing type (ex : X).
Regards,
Lionel

Retriggering pricing while saving the billing document (vf01)

Hi all,
Please help me in the issue. I want to determine the pricing 'carry out new pricing B' at the time of saving invoice doucment . Can anyone tell me the userexit for doing the same.
Thanks ina advance,

Isn't there a configuration settings in copy control to the billing documents? Why do you need to use a user exit for this?
In any case, please use search here and in the SD forums (all 3 of them). I believe this has already been discussed. Search for 'invoice repricing' as well.

Runtime error while saving the billing document after creation

hi friends ,
while saving the billing document after creation , the fallowing discriptive runtime error has come.
Run time errors -
SAPSQL_INVALID_TABLENAME
Except. -
CX_SY_DYNAMIC_OSQL_SEMANTICS

Dear Unnam,
There may be several reasons...
1. If u have enhanced the tcode with some z tables,and that might not be moved properly to prod or not active in data dictonary.
2. u may not be entering proper data to the input fields.
3. please check if u have added any z tables to the std tcode.I am exepcting this prob.u may not moved the table or enhancement properly to prod server,
Please check it...
Thanks N Regards
SettyKY

Error while saving the billing document

Dear All,
I am getting an Error- "No taxes on sales/purchase are allowed for account 870205 L002, AB is not allowed" when i save the billing document. when i go to the conditions tab under item data in the billing document after saving the document and try to view the detail for the discount condition type it shows that the discount condition type has a tax code AB assigned to it.
I am using the same pricing procedure in another company code where it works fine and I don't get any error. Besides here on viewing the same discount condition type there is no tax code assigned.
Can anybody explain what could be the possible reason?
I searched for the solution in the forum and came to know that if I go to FS00 and assign * to Tax Category under control data then it works fine and i don't encounter the problem after saving the billing document.
Although i have found the solution But what troubles me is that when the same pricing procedure works fine in the first company code without assigning * to the tax category then why do i need to assign * in the second company company code to be able to save the billing document.
Thanks and Regards
Deepak Joshi

First of all let me ask you to indicate the name correctly.
Secondly, the root cause to the issue what you have indicated is in FS00 and you need to compare the settings in both the company codes.
Finally, the issue is not because of your pricing procedure but because of some missing FI settings. Thats all I can say now based on the information you have provided.
thanks
G. Lakshmipathi

Need userexit while saving the material in MM02

Hi folks,
Need a userexit while saving the material in MM02 transaction.Kindly help me out.
Regards,
Raj.

FM while saving the MM02 is 'MAFI_POPUP_TO_CONFIRM_SAVE'.
Regards,
Rajasekhar.

User Exits for transaction VF01 before saving the billing document

Can any one say is there any user exit which exits before saving the billing document since i want to check the net value of the billing with the net value of sales order so that it should not go beyond the total amount specified in sales order.

J_3RSINV
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference numbe
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedu
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lis
V61A0001 Customer enhancement: Pricing
These are the Exits Available in the Package
Jus try finding which will suffice ur Requirement.
Regards,
Mithun

In VF01, before saving the billing document, can we use "issue output to"

In VF01 transaction before saving the billing document, can we use "issue output to" under Billing Document in Menu.
i.e., can we enable the option "Billing Document -> Issue output to -> Issue output to"

Hi,
No as a standard, unless the billing document is created and released to accounting, you can't use issue output to.
Regards,

Error while releasing the billing document to accounting

Dear All,
I need your favor to resolve the below issue:
(System SAP SAP ECC 6.0)
User is getting the below error message while releasing the billing document to accounting in VF02:
This is an inter-company billing document (B. type : IV) created in company code 0151. Payer is "IC0186", verified the customer has been setup in 151.
Corresponding invoice has been successfully posted in company code 0186. (Partner : P0151)
User is able to post the inter-company document in 0151 using other inter- company partner (ex. IC0183). Therefore, seems that Document type can't be an issue here.
"Consolidated companies 151 and 186 are different
Message no. F5080
Diagnosis
The number of the affiliated company must be clear for the selected document type for all the line items. In this case at least two different companies or a company in connection with a business partner who does not belong to a company are stated.
Procedure
If you selected the correct accounts, you must enter the document with a document type that allows cross-company posting. Otherwise, please correct the entered account."
Could anyone please suggest what can be the reason, if any configuration is missing. Any help is this regard will be highly appreciated
Thanks in advance,
Praveen

Hi Murali,
Thanks for the prompt input, however as mentioned document type can't be an issue. Since user is able to post the document (same document type) using other inter-company partner in 0151.
Thanks,
Praveen

Error While Releasing the Billing Document Msg No. KE/AD 243

I am getting error while releasing the billing document
Error No KE/AD 243
This error comes in particular billing document only others are posted correctly.
Rgds
Dhiraj

Dear Anil
We had applied EHP3 enhancement, before EHP3 is working fine with no transfer sign assignment but after EHP 3 it gives the error and not in all billing document but in particular document only. so i think there is no changes required in KE4I.
Rgds
Dhiraj

While releasing the billing document error

Dear TEAM,
While releasing the billing document system was showing the message like NO STANDARD COST ESTIMATE COULDBE FOUND FORTHE MATERIAL.
I have suggested to the user to release the price through ck24.At that time system is showing the message like cost has not been created for the inhouse production.
The samething was tested in Qualiy server and the transaction was through.I have not done any price release for the samematerial.I have checked the table under VBAP the documents was made against to the samematerial.That time we have not faced any issues like this.
Note:Material ledger concept using by client.
Please kindly advice how to proceed further.
Regards,
Suma

have you checked in ck13n if there is a standard cost estimate for the material and what status it has, if there is one? Also, what are the dates in that cost estimate? How do they compare to the date of the billing document? What does the customizing say about the selection of cost estimates for valuation of SD documents? SPRO>Controlling>profitability analysis>master data->valuation-->Set up valuation using material cost estimates
Nikolas

While saving the sales document .this error is coming.

Is there any body to help it out .......
While saving the document this error is coming
**Financial document: No financial document assigned**

Dear dinesh
It seems the field "Financial doc.no" is made as mandatory in VA01. Also if I am right, you are trying to create an export sale order which is against L/C.
To create L/C, go to VX11N, give the required datas and save. While saving, system will generate a reference. Make a note of this reference and now go to VA01, give the required datas and select header Billing tab where you can find a field "Financial doc.no.". Assign the above reference here and now save.
thanks
G. Lakshmipathi

Error while releasing the Billing document

Hi Everyone,
Encountering an error with the description 'Balance in Transaction currency' while trying to release the Billing document from VF02 transaction, still didnt come across the right oss note that can remove this error, can any one give me a clue on this,
Rgds,

hi,
We are facing similar problem, when releasing the billing document to accounting.
Have you been able to find the solution to this problem. If so, kindly suggest the answer
Thanks
Dinesh

BADI after saving the billing document

Hi Experts,
Please tell me the BADI name which will be triggered after saving the billing doc
Here once the customer billing document will be saved, BADI will update the equipment master.
Regards,
Sandeep
Edited by: Sandeep Ballewar on Jul 1, 2010 11:49 AM

Hi,
Can anybody throw some light on below issue?
Regards,
Sandeep

Error while cancelling the billing documents with VF02

Hi,
I am trying to cancell the billing document with VF02 but while cancelling with VF02 i am getting error "For object RF_BELEG MS20, number range interval 62 does not exist FBN1", here MS20 is our company code then in FBN1 i have checke number range for 62 fiscal year 2009, but number range is properly maintain thier.
what can be the problem, the document is made today itself and i am cancelling on same day
regards,
zafar

Hi,
Goto the Transaction code FBN1 and maintain the Number range 62 for the Financial year 2009 in your company code
Check the same is available or not in OBA7 for the Reversal accounting document for your company code
Please check and revert back
regards,
santosh

Need userexit while saving the billing document (VF01)

Similar Messages

Maybe you are looking for