Need video clips to "fall into place" using scale and position, but Premiere isn't cooperating...

Hey guys, I'm working on a project for a client where I need 50 video clips to "fall" from full screen to a "puzzle" in the background, then I have some after effects to do, but my problem is that I can't seem to get a video to play "underneath" another video. Any suggestions?

Yep they are, as each clip needs to continue to play for the full 30 second spot, so I think you're right I'm going to have to move the project to Ae and do some precomps. Premiere started doing some weird stuff with my video clips (After pre-render it would invert the image and shift them all to black and white) which I couldn't find a fix for, so its back to the drawing board as far as prepping them goes.
I think Ann is right, too. The client supplied all the clips, (1280x720 MTS, 60fps) some of which are an hour long, but I only need 30 seconds or less of each clip so it could also be a conforming issue, as a lot of these files are HUGE. I was hoping my machine could handle it (ASUS G73JH, intel 8-Core i7, ATI HD5870, 12 Gigs RAM, 2TB external swap drive/storage, 1TB Internal HD, 512MB SSD Internal swap drive) just because I'm basically lazy and didn't want to have to pre-render each clip, but now it looks like I'm going to have to. I was hoping there was some new sneaky way of only importing select edits of video clips with CS6, but it looks like its manual edit/export for all 50 of 'em.
Good thing I was paid in advance

Similar Messages

  • How can i export video clips in iPhoto into iMovie?

    how can i export video clips in iphoto into imovie?

    Hello andrewmarkp,
    As long as the videos are in a format that can be used by iMovie, they will appear in your Event Browser, under 'iPhoto Videos.'
    iMovie '11: Use video from your iPhoto library
    http://support.apple.com/kb/PH2196
    If you’ve imported video from your digital camera into iPhoto, it appears automatically in your iMovie Event Library (as long as the video is in a compatible format).
    To use iPhoto video in iMovie:
    Click iPhoto Videos in the Event Library.
    The videos appear in the Event browser on the right. You can select and use the video just as you would any other footage.
    To learn about importing video into iPhoto, open iPhoto and choose Help > iPhoto Help.
    Cheers,
    Allen

  • Where can I download short mp4 video clips to put into garage band for my students to put a soundtrack to?

    Where can I download short mp4 video clips to put into garage band for my students to put soundtracks to?

    Theres a program called Bluestacks app player which when installed gives you an Android enviroment to be able to download apps etc and use/play them on a Pc from this you can then install an app which can create a backup of the app in apk format for transfer to a mobile or tablet etc for installation via your file manager app
    For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled.   Richard P. Feynman

  • How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file= export it to them from iPhoto?

    How can I email a video clip I downloaded into my iPhoto library to my friends? I tried creating an email and attaching the clip but there is no sound and no picture when the 5 minute attachment "plays." How can I file=>export it to them from iPhoto?

    Have them install Quicktime on their PC's from Apple's website, that's the easiest fix.

  • Can't select multiple video clips to import into iMovie

    Hi, i can't select multiple video clips to import into iMovie, it only lets me import one video at a time. Apple please fix in next update or if anyone has a solution please post.

    Obviously you can not select the video to import until after iMovie populates the list of videos that are available to be imported
    LN

  • Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both  devices are connected ?

    Trying to transfer a video clip from iPhone to iPad using transfer app it says device not found, I have used this before wifi is fine and both  devices are connected ?

    That does not involve iPhoto for the Mac in any way - try the iPad forum
    I will request your post be moved
    LN

  • I am trying to change the date on an imported home video clip. I entered 9/7/2012 and got 6/9/0339! I checked modify original file, but it is not working. Any ideas?

    I am trying to change the date on an imported home video clip. I entered 9/7/2012 and got 6/9/0339! I checked modify original file, but it is not working. Any ideas?

    Are you using the Adjust Date and Time option or the Batch Change option?  If it's the former try the latter.  If you get the same results  launch iPhoto with the Option key held down and create a new, test library.  Import  the same video file and check to see if the same problem persists.
    OT

  • Hello guys..does anybody know how to install and use adobe master collection with the new lion?   I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...   I am a new mac users and I'd like t

    Hello guys..does anybody know how to install and use adobe master collection with the new lion?
    I need to use Flash and illustratore, but apparently those programmes are incompatible with the new operative sistem...
    I am a new mac users and I'd like to know if there are other similar programmes I can use with lion!

    Lab79 wrote:
    Are you on Apple's payroll?
    well dude I can only let you know that as I work with those programme I don't have to pay for it is my company that pays the programme I whant to use( that's why I was asking if there where other programmes ..that I could use with lion insted that Illustrator and Flash!)..I know Adobe since 2005 and I can say that Adobs products are very good...I think that if it's an Adobe probleme or fault ..they will solve it very soon...but unfortunally I have the impression that after Jobs passed away Appel decided to change politics..and everything started to go very bad! (see FCP X)..
    good luck with apple dude..
    Where is the Apple problem? I have CS4 and CS5 running perfectly fine on my Macbook Pro. Installed 5 after Lion upgrade. Worth every cent. Adobe did have some catching up to do with Lion but with the CS5.5 update all runs fine. But not yours. So it is a problem with the Lion OS? You say you have been with Adobe since 2005. So you would be aware of all the other issues that Adobe had catching up with past Oss in Mac and Windows then. They get it right, but it is up to them. It is not up to Apple, nor Microsoft for that matter, to run around and check that every software developer in the world is running their business properly.
    And what has politics got to do with anything. Some people just have to blame Software for their poor Hardware maintainence of failure of the same.
    <The only think I can really do is to go back on my old windows...give back this orrible lap top and ask for my money back!>
    Great suggestion. You should go with that one, but good luck getting a refund.
    Bye

  • I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.

    I am trying to switch from video to camera and when I push on the photo button, it remains on video.  I've tried turning it on and off, but that doesn't help.  Any suggestions?

    Tapping the words don't work in iOS 7. Just swipe up or down anywhere on the screen until the mode that you want to use appears in yellow type on the right side. Yellow type indicates the selected mode.
    Remember - swipe up or down to get to the mode that you want to use.

  • Installed PE12 in June, but haven't used it since.  Tried to open using shortcut and program, but nothing happens, help?

    Installed PE12 in June, but haven't used it since.  Tried to open using shortcut and program, but nothing happens, help?
    Should I uninstall and reinstall, and if so does that cause additional problems?

    I'm having the same problem.  I used it one day and everything was fine...next day, nothing will open.  Tried uninstalling and re-installing numerous times but no change.  Tried to contact support and they don't support this product (I just purchased it in August).  Am VERY disheartened with their customer support.

  • Ipod nano 5th is unrecognized and rejected after downloading new itunes on Windows 8. Everything works on both- can use ipod and charge, but no recognition, no sync. Whassup? Did something get lost in the itunes update?

    Ipod nano 5th is unrecognized and rejected after downloading new itunes on Windows 8. Everything works on both- can use ipod and charge, but no recognition, no sync. Whassup? Did something get lost in the itunes update?

    I'm having the same problem. I wish someone could respond with a solution for this! I've paid money for new songs and can't listen to them because of this! WTH APPLE?!?!?!?!

  • Whats the best way to import video clips from FCP into a personal template

    Hey all, I'm doing some tests. I see some color shifting going on when I export out of FCP using QT conversion (same settings as sequence), Importing into Motion, then adding lower third graphics, then exporting out of Motion .... and finally back to FCP. I put the new graphic added layer on top and have the original on bottom. I toggle the monitor on both layers and see a slight saturation drop on the graphic layer. Has anyone noticed that ?
    The reason Im doing this is because lets say I have lower thirds that I want to place throughout a hour show. I want to set-up a basic lower third template and just plug in the video clips for the areas that I need those graphics. It would be way to difficult to export out of the timeline in FCP
    and rebuild those lower thirds everytime in Motion. Does anyone know of a better way or does everyone have to export out to the desktop and then into Motion every time they want to use a Motion template.
    Thanks to any replies.

    Try roundtripping from FCP to Motion and back using Send to Motion. In FCP, Control Click your clip>Send To>Motion Project. The clip will open in Motion with the proper project properties. Make your edits there, press Save, and then render back in FCP. No exporting necessary, although you might see a gamma shift. Much easier.
    To do this with an existing Motion template, I'd try copying and pasting in that template's contents once you've sent to Motion from FCP.

  • Bringing random video clips from online into imovie...

    I want to find old 1920's footage of trains and people on trains and put the clips together for a 3 minute music video to go with a song a friend and I wrote. Is it possible to find clips online and bring them into imovie in order to do this? I am very new to imovie so the more info I can get the better.
    Thanks in advance!

    There is a site here. By sure to read the licensing and attribution requirements.
    If you can get a quicktime file that meets your need, you can import into iMovie using the FILE/IMPORT.../MOVIES command.

  • How do I get a quicktime video clips to go into my itunes?

    Hi I have the latest version of itunes and quicktime ( Version 7.1.3) but I can't get itunes to play my quicktime video clips. I've tried dragging and importing them in but nothing happens. If anyone could help it would be greatly appreciated!

    Hi thanks for the help. But I was hoping that I wouldn't have to download or have to convert video files. I have a quicktime video in my itunes now but it was a while back when I added that I can't remember how too. Is there a easy way to do it or will I need to convert the Avi.files to something else? Thanks again for the help!

  • Pick and place using labview and Ni vision acquisitio​n

    Hi everyone,
    I am doing a student project  on Vision guided pick and place of an industrial robot(abb) . I would like to know the steps involved in creating the block.
    I have to locate the object , get its cooordinates through webcam. Then does a pattern matching.. and would send the cooordinates to microcontroller . then from microcontroller to robot controller.. then the industrial robot should pick the object and place it in a predefined place..
    I would be extremely grateful if you guys can help me since  I am new to LabView. 
    Thanks,
    Pradeep.M
    ( [email protected])
    Solved!
    Go to Solution.

    What you are describing is fairly involved, but here's are some tips.  The key is to correlate the robot's coordinate system to the camera's coordinate system.  I assume the camera is statically located above the pick-up area?  I would move the robot to each corner of the frame to its pick position vertically, and note the robot's position at those locations.  These 4 points in space will be correlated to the X,Y coordinates of the camera frame's pixels.  You basically need to write a sub-VI with the inputs being pixel X and Y coordinates, and the output being the robot coordinates.
    Write a test application telling the robot to go to any X,Y pixel location in the frame to test your sub-VI.  If that is working, then you need to set up a pattern match.  You will likely want to do a geometric pattern match.  Have a look at this example:  http://zone.ni.com/devzone/cda/epd/p/id/5555
    You will need your pattern match algorithm to return both the coordinates for your robot, and the orientation of the tool required to properly pick up the object (if the pick and place robot tool requires that it be in a specific orientation).  So its basically up to you to convert the object's X,Y,and rotation angle in the frame that you get from the pattern match to whatever coordinate system the robot uses.  
    The placing algorithm could just be a orientation adjustment to put the object into placement orentation, and then the placement positions could be an array of robot coordinates that you iterate through after each pick.
    Make sure to implement some safety mechanisms in your algorithms so that the robot can never move somewhere outside a safe range of coordinates.
    www.movimed.com - Custom Imaging Solutions

Maybe you are looking for

  • HP AiO Remote app will not recognize scan and copy function of HP Envy 120

    Good morning! HP AiO Remote App is installed on my iPad4 and in the same WiFi network with my HP Envy 120 printer. The printer is recognized by the app and marked with a green led. When I tap on scan or copy in the app menu, it tells me that these fu

  • About the warning about changes message.

    Hi all, There is a messageChoice on the page,and the messageChoice must fire an action.But if the action is fired,then I click on the other tab or link, warning about changes message will not occur and directly farward to the other page.Is that possi

  • Insert performance issue with Partitioned Table.....

    Hi All, I have a performance issue during with a table which is partitioned. without table being partitioned it ran in less time but after partition it took more than double. 1) The table was created initially without any partition and the below inse

  • Vanishing signatures

    I have three email accounts running on mail, two business ones and a personal .mac account. I have a total of four signatures which I use, one for each business account and two associated with the .mac account. Every few weeks I find that the signatu

  • HP 1515

    Hello, my printer 1515 can't print a PDF file. My Adobe Reader doesn't seem to detect the printer. Any help pls?