Need Video HELP PLZZZ!!!

Ok, so i got a music video from iTunes music store and put it on my iPod. When i went to watch it it jus played like any other music song would, no video jus the song and i am clueless on why its doing it???? Help plz.
WoWAddict44

This can happen if you play from the music or playlist menu. On the pod select video, then the video and then play. If this doesn't work, post back.

Similar Messages

Hi i need sum help plzzz, iphone 3gs blackscreen and tryed evrything but wont kick out of dfu mode , much apreicated plz

hi i need sum help plzzz, iphone 3gs blackscreen and tryed evrything but wont kick out of dfu mode , much apreicated plz, it just happen wen i was restoring the screen is balck but wen i restore it from itunes it says erorr 1600 and itunes does not reconise the phone , i have tryed eveything bt still no luck , I NEED UR HELP PLZZZ ,its my disabled daughters thank you

Anyone on this forum can correct me if I am wrong. I am not judging you, but to my knowledge the iTunes error 1600 usually affects products that are jailbroken. again I am not saying that your iPhone 3GS was jailbroken. my only advise off the top of my head to assist you is to download the recent IOS firmware online. I know it is not the the #1 advised option, but it is the only option you have unless you wish to bring it to the Apple Genius bar and see if they can replace the phone or fix it themselves.

Need Video Help Please

Ok here's the scoop, I am a football video manager and we hate using the utility software. Last time I used handbrake to convert every file (I did not realize it did not have batch conversion) and It took hours due to the fact that the clips are shot in widescreen DVD format and each individual clip is about 4-8 seconds (per play basis) and there are around 150 of them.
First question, I need to know the name of a batch converter that will make the conversion process much easier.
Now, once I did convert them, my MacBook would almost crawl to a standstill when importing all of them into iMovie 08' in a .mp4 format. This once again took forever to make sure that the files were put into the correct order and then dragging and dropping every single clip into the storyboard. Then I had to save it as a video file that I could drag into iDVD. The quality is great but the time takes way to long in order for me to want to do this again.
Second part of my question: Where is a better video editing software that makes it much easier to take all of the files and save them into one movie file that does not take so long to drop into a storyboard?
Also, is there such a beast that allows you to batch convert them (aka "queue" them) and it automatically outputs all of the converted files into one big movie file? That way I could drag it into iDVD. Now my limits for the total on the software would be around 70-100 dollars making this endeavor somewhat difficult for me to find. Any help is appreciated and if you have anything ot offer in order to help me I would greatly appreciate it!

sorry, I'm a bit lost in your narration, so in my words, you like to:
• convert DVDs
• you need just a few selections of each DVD
• combine those clips to one movie, not as individual clips on one DVD
right?
1) you could speed-up that process dramatically, if you just want to 'select and combine' by avoiding any conversion (editing mp2 directly).. therefor, you have to learn other, very different (=less convenient) tools than iApps.
2) or, by using a diff. converter, namely Mpeg Streamclip, you can select and convert just the parts you need from DVD, illustrated advice on my site: http://karsten.schluter.googlepages.com/convertdvdstodvs
3) general advice: slow processing indicates a lack of disk-space on internal/'startup' drive.. keep 15-30Gigs free while doing any 'video work'
and, btw, welcome, Mactooth92, to the  iMovie boards..

Need video help

I bought video from iTunes and they show up in my iTunes menu, but they don't show up on my ipod.
I click on the "display options for player" ,I choose the Video tab and nothing is highlighted. I can't change the "donot update video" button. Can anyone help me?
BTW my ipod is video compatible.

hi anibird!
have you checked through these resources yet?
Frequently asked questions about viewing and syncing video with iTunes and iPod
Why can't I transfer videos to my iPod?
Videos labeled TV Shows in iTunes don't appear on iPod
... if no joy with any of those, it's probably worth checking in at the fifth generation (video) ipod forums:
Fifth Generation iPod
love, b

Need Video help (stutters)

I don't know if this is something defective with mine, or if I am doing something wrone, I've got the 30gb iPod, I converted a DVD over and when I play it on my iPod the video "stutters" (best I can describe it) it seems to have a stutter every 3-4 seconds (kinda like a pulse/heartbeat) I have tried reconverting the video with 24 FPS all the way up to 30 FPS and always the same affect, I have seen video running on the store display units smoothly, so I'm not sure if there is something wrong with mine or if I am doing something wrong, if it's a problem with my unit I can exchange it with another that works? any suggestion would be greatly appriciated. Thanks.

Im having the same problem with mine - even with videos/TV shows purchased from the iTunes store. Does anyone have a solution?

Need some help in saving video message from viber to my Iphone. I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery"

Need some help in saving video message from viber to my Iphone 5S with new ios 8's program . I disabled the thing that would save photos and videos automatically then, there comes a video I want to save. After loading and watching it, I press the "save to gallery" thing but it doesn't save in gallery. I tried all, restarting my phone, rebooting then turning on the save automatically thing and when I watch it again, it still wouldn't save.

Probably a good question to ask Viber or look at their support site.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

I have a video in excellent quality (1280x720 23,976 fps) I burn the dvd in encore cs6 with hd menu and I get pixelated. I've done transcoding but It downgrade to 480 I need urgent help.

Hi,
first, sorry if my english sucks jajaa i speach spanish, havent practice my english for a while.
first i edited my video in premier cc
sequence 1280X720, 59,94 fps
48000hz - stereo
the i linked it with dynamik link to after, make some color correction, etc etc etc
i renderd in quicktime animation
my video looks fine in my computer, but when i send my .mov video to encore (cs6) in a HD MENU and standard menú, the image sucks.
i have done the transcoding in encore, but i doesnt work either. i dont know what else to do.

I need a help in reading video file of 80MB into ...

Hello,
I need a help in reading video file of 80MB into a vector storing ByteArrays in it.Please help me soon.
Thank You

Hello,
I was able to solve my problem by thinking & my code goes as follows.I am trying to read a video file in my program.
public Vector getFileMediaContent(RandomAccessFile fileObj){
Runtime runtime = Runtime.getRuntime();
System.out.println ("Free memory : inside Boolean Type Panel" + runtime.freeMemory() );
dataContent.removeAllElements();
System.out.println("dataContent :"+dataContent.size());
try{
int size=(int)fileObj.length();
if(size<2000000){
byte[] data = new byte[size];
fileObj.read(data);
dataContent.addElement(data);
data=null;
System.gc();
else{
int fixedsize=2000000;
int startindex=0;
int read=0;
int remaining=0;
while(read!=-1){
byte[] data=new byte[fixedsize];
read=fileObj.read(data,0,data.length);
dataContent.addElement(data);
startindex=startindex+data.length;
remaining=size-startindex;
fileObj.seek(startindex);
data=null;
System.gc();
if(remaining>0 && remaining<2000000){
byte[] data1=new byte[remaining];
read=fileObj.read(data1,0,data1.length);
dataContent.addElement(data1);
data1=null;
System.gc();
System.out.println("outside while");
System.out.println("dataContent 1 :"+dataContent.size());
System.out.println ("Free memory : inside Boolean Type Panel" + runtime.freeMemory() );
fileObj = null;
System.gc();
}catch(Exception e){
e.printStackTrace();
return dataContent;
Now I am not facing the problem of IndexOut of Bounds Exception But I am getting Out of Memory Error.
Can You suggest me to come out of this,.
As I know I have two solutions.
1.Make the objects Null which is using more space & call System.gc();
2.Increase the Virtual Memory of my System.
Any solutions other than this?
And How to Increase the Virtual Memory?Please do reply.
ThankYou

My videos stuck in workspace but runs good when exported ... need a help please

my videos stuck in workspace but runs good when exported ... need a help please

Hello,
My video slows down in my workspace but runs in normal speed when exported

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute then turn on wifi on iMac before it can reconnect. Need some help please.

Remote App on iPad connects but drops after about 20 mins. Need to turn off wait about 1 minute, then turn on wifi on iMac before it can reconnect. Need some help please.
Already gone through troubleshooting guide a zillion times. Thanks.

This worked for me... A little time consuming but once you get rolling it goes GREAT... Thanks....
I got my artwork and saved it to my Desktop
Opened up Microsoft Paint and clicked on "File" and "Open" and found it to get it on the screen to resize it
Clicked "resize" and a box for changing it opened up
Checked the box "Pixels" and "Unchecked maintain aspect ratio"
Set Horizontal for 640 and Vertical for 480
Clicked on "OK" and went back to "File" and did a "Save As" and chose JPEG Picture
It came up "File Already Existed" and clicked "OK" (really did not care about the original artwork I found because wrong size)
Went to iTunes and on the movie right clicked on "Get Info", clicked on "Details", then "Artwork"
Go to the little box on the top left that shows your old artwork and click on it to get the little blue border to appear around it and hit "Delete" to make it gone
Click on "Add Artwork" and find it where you put the one from above on your Desktop and hit "Open" and OK and your new artwork is now there and all good.
Sounds like a lot of steps to follow but after around 5 or so you will fly through it. This worked perfect on my iPhone 6 Plus and I have artwork on my Home Videos now.

Need some help in Los Angeles

working on a music video that needs some help. I own Final Cut and Color. Done the edit and it looks great but it needs help polishing and I have no idea what to do. Planning on showing the video this friday night in hollywood and I want it to blow people away. Is there anyone in the area would be willing to help? Please contact me ASAP. Thanks Ray

if you can give me a call that would be best, I can tell you what I need to accomplish. Thanks
818 935 5079

Hi! I got movies on my external hard drive that are AVI kind and won't play on my macbook pro? need some help please!!

Hi! I got Movies on my external hard drive that are AVI kind and won't play on my macbook pro? When I start playing the movie a message pops up and says "a required codec is not available". I tried flip4mac, xvid, divx already and still not playing my video. need some help please!! thanks.

Although vlc mentioned above is a much more powerful and better player you could try installing Perian if you insist on using the quicktime player. It may supply the codec it needs.
Not sure why you wouldn't be able to play straight avi files though in quicktime.

In need of help to replicate something and then modify it

I need to recreate an image document that is a bit complex and I need to get some direct feedback regarding how exactly to do this. I'm new to Photoshop. Even though I've watched many of the Photoshop training videos I still need further help for this project. I have a sample of what I need to recreate. Unfortunately what I am trying to replicate has already been grouped or flattened, otherwise it would be easy enough to simply replace and modify each layer as needed. Does this make sense? If a seasoned Photo-shopper is available to assist me briefly I'd be most grateful. I may be contacted at [email protected] Many thanks!

Thank you dj. I thought I was on the Photoshop forum so thanks for alerting me:)

Slow Loading On iWeb Pages - Really in Need of Help! (Thanks!!) :o)

Hi Everyone!
I have been a lurker here, learning from reading other's posts. I am in serious need of help, as I have been struggling with this issue for over a week and I can't move forward to other things until I get it resolved...
Here's what's up: I am creating a single-page website as a landing page for a product I offer. (These are very common now in product marketing). The page is here: http://www.howtogetamazingrelationships.com.
The page that is there is about the 4th iteration of the page in the quest for a faster-loading page. Everytime I test it - no matter what I do - it ends up being about a 24 second load time. Here's a sample test for review: http://tools.pingdom.com/?url=howtogetamazingrelationships.com&treeview=0&column =objectID&order=1&type=0&save=true
Here are the things I have done to try to speed this baby up:
1. Took my youtube video off auto-play.
2. Optimized the site using Web Site Maestro. 27% decrease in size; no load time difference.
3. Took out shapes and graphics.
4. Rebuilt the site on a blank template - now it is actually a little worse!
5. Took out the website.js file - totally messed things up.
6. Eliminated the navigation.
Nothing is even showing the least bit of difference in speed...and it is driving me crazy.
Here's the thing - I have also contacted Web Site Maestro's support for help, and they said that the problem was the size of the site and the length of the page. But here's the thing - I checked the load speed of a page that is about double my page size and length, and it loads in like 4 seconds: http://tools.pingdom.com/?url=http://www.wealthbeyondreason.com/page2.php&treevi ew=0&column=objectID&order=1&type=0&save=true
Anyone have help/advice for me? I am so frustrated with this, as the iWeb is crazy-easy to build, but I can't have a simple one-page product page load that slow. No one is going to stay around for 24 seconds!
I just am at the end up my rope and don't know anything else to do. I really don't want to rebuild the site again and still not see results, so any help would be hugely appreciated.
Thanks so much in advance, and I hope you are all having a beautiful day -
:o) Tara

Okay, more info -
I checked my site on a different web analyzer, and it does seem to be loading quickly - 15.66 seconds for a 56 k, but only 3.6 for T1. So that is good -
One thing I noticed in the recommendations is that there are 6 scripts that are running, that can slow things down. I don't really know how to change that (I am pretty web-savvy, but far from a developer) Here's what they recommended on the page -
Analysis and Recommendations from webanalyzer.com:
TOTAL_OBJECTS - Caution. You have 18 total objects on this page. From 12 to 20 objects per page, the latency due to object overhead makes up from 75% to 80% of the delay of the average web page. See Figure II-3: Relative distribution of latency components showing that object overhead dominates web page latency in Website Optimization Secrets for more details. Consider reducing, eliminating, and combining external objects (graphics, CSS, JavaScript, iFrames and XHTML) to reduce the total number of objects, and thus separate HTTP requests. Consider using CSS sprites to help consolidate decorative images.
TOTAL_IMAGES - Caution. You have a moderate amount of images on this page (10 ). Consider using fewer images on the site or try reusing the same image in multiple pages to take advantage of caching. Using CSS techniques such as colored backgrounds, borders, or spacing instead of graphic techniques can help reduce HTTP requests.
TOTAL_SCRIPT - Warning! The total number of external script files on this page is 6 , consider reducing this to a more reasonable number. Combine, refactor, and minify to optimize your JavaScript files. Ideally you should have one (or even embed scripts for high-traffic pages) on your pages. Consider suturing JavaScript files together at the server to minimize HTTP requests. Placing external JavaScript files at the bottom of your BODY, and CSS files in the HEAD enables progressive display in XHTML web pages.
HTML_SIZE - Caution. The total size of this HTML file is 60492 bytes, which is above 50K but below 100K. With 50K of images and multimedia this means that your page will load in about 20 seconds. Consider optimizing your HTML and eliminating unnecessary features. To give your users feedback, consider layering your page or using positioning to display useful content within the first two seconds.

Need Quick Help if Possible

I have two big questions that I need urgent help with.
1. Can you reference a background image in flash that will
change montly?
2. Can you reference Microsoft Reporting Services to publish
reports through a flash interface in SharePoint?
I know these are crazy questions, but I am working with a
client and need to know whether this is possible ASAP as I have to
get it completed by COB tomorrow if it is possible.
Thanks so much!

Remove all the videos that won't play from your iPod. Go to the Store menu in iTunes, Deauthorize your computer, play one of the videos in question and when prompted enter your Apple ID and password. Resync the videos.

Need Video HELP PLZZZ!!!

Similar Messages

Maybe you are looking for