Need VIs converted from LV 5.1
Could someone please convert the VIs in the zip files attached from LV 5.1 to perhaps LV 7 or 8? I have 8.5 and can't open them because they're "too old".
Attachments:
20hzsqwv.zip 30 KB
loopback.zip 139 KB
Hi Sima,
I can convert these for you, as I have 7.1 and 8.5.1. However, there are many controls missing as I do the converts - so the version in 8.5.1 have large numbers of vi's missing. So a better option maybe to build the vi's in the newer version. Not ideal I know. Let me know what you think, or if you can attach the library which will cause me the problems.
Regards,
Kind Regards
James Hillman
Applications Engineer 2008 to 2009 National Instruments UK & Ireland
Loughborough University UK - 2006 to 2011
Remember Kudos those who help!
Similar Messages
-
Here i need to convert from EA to CS.
Hi Dear friends,
iam having one requirement. that is conversion.
here is need to convert from EA to CS, for that one iam using FM: conversion_factor_get
But this is not converting and when i run program it was showing the error is "conversion of dimensionless units is possible".
Here i need to convert from EA to CS.
this is Eg:
DATA : LV_SS TYPE F,
LV_DEC(100) TYPE N,
LV_NUM(100) TYPE N.
call function 'CONVERSION_FACTOR_GET'
EXPORTING
NO_TYPE_CHECK = ' '
UNIT_IN = 'EA'
UNIT_OUT = 'CS'
IMPORTING
ADD_CONST = LV_SS
DECIMALS = LV_DECI
DENOMINATOR = LV_DEC
DIMENSION =
NUMERATOR = LV_NUM
EXCEPTIONS
CONVERSION_NOT_FOUND = 1
OVERFLOW = 2
TYPE_INVALID = 3
UNITS_MISSING = 4
UNIT_IN_NOT_FOUND = 5
UNIT_OUT_NOT_FOUND = 6
OTHERS = 7
if SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
write : lv_ss, lv_dec, lv_num.Hi
first ensure that the both values CS and EA exist in the table T006
then only the conversion of the units is possible using the fun module
'CONVERSION_FACTOR_GET'
Since the unit CS is not available in T006 table it is not working
This fun module in turn uses the table data T006 for the conversion of units
Regards
Anji -
Need help converting from 4.0 to 2011
hello,
Need help converting files from 4.0 to 2011.
thank you
Solved!
Go to Solution.
Attachments:
noise source.vi 73 KB
8673D.vi 30 KB
8970 FREQ.vi 26 KBattached as 8.2, which you can open
missing some subVIs - not sure if you already have them
Attachments:
8673D.vi 13 KB
8970 FREQ.vi 11 KB
noise source.vi 24 KB -
ABAP code needed to convert from 0calmonth2 & 0calyear to 0calmonth
Hi SAP GURUS,
Can anybody give me the ABAP code to convert from 0calmonth2 and 0calyear to 0calmonth.and please suggest me whether i have to write start routine or end routine in transformations.
Thanks ALL.hi,
in the transformation map 0calmonth2 and 0calyear to the 0calmonth field, and from drop down choose routine.
there will be an area where it will be mentioned write your piece of code below this line.
paste the below code:
Concatenate source_fields-0calmonth2 source_fields-0calyear into result.
also delete the line result = .
save the routine and execute the package.
regards,
Arvind. -
Globals in VIs converted from LV6.1 to LV8.0
All,
IThanks
Hopefully this will work.
All,
I am having a problem with Globals variables.
I have converted our code from LV 6.1 to LV 8.0. In one instance a VI writes some globals which are available for use in other independent VIs. After converting these global values are not reliably available when running the separate VIs. I see LV8.0 uses shared variables and have found info talking about usage and differences but nothing stating traditional globals must be converted to shared variables in LV 8.0.
Is conversion to shared variables the answer or am I missing something else?
Thanks -
[AS] Beast of a script needs help converting from Quark 8 to InDesign CS5
First off, THANK YOU for even reading this post. Here's the dilema. I work in a publishing company that used an AppleScript from Quark 8 to automate our pagination from set text we pull from our sales reps worksheets. About 8 months ago we switched fully to InDesign CS5, but have had to hold onto Quark 8 to be able to keep running our pagination. I'd like to see if the geniuses (yes, I've been trolling these forums looking to solve this myself and seen some great problems fixed) on these forums can help me figure out the proper conversion I would need to be able to leave Quark 8 in the rearview.
Here's our current code... (I warned you it was a beast)
set Ad_Props to {¬
{Ad_Label:"SPREAD – ", Ad_Width:2.495, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"FULL – ", Ad_Width:1.225, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"SPREAD – ", Ad_Width:2.495, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"JUNIOR – ", Ad_Width:0.90625, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/2H – ", Ad_Width:1.225, Ad_Height:0.785, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/2V – ", Ad_Width:0.5875, Ad_Height:1.62, Ad_Text_Angle:90}, ¬
{Ad_Label:"1/3V – ", Ad_Width:0.5875, Ad_Height:1.2025, Ad_Text_Angle:90}, ¬
{Ad_Label:"1/4 – ", Ad_Width:0.5875, Ad_Height:0.785, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/4 Strip – ", Ad_Width:0.26875, Ad_Height:1.62, Ad_Text_Angle:90}, ¬
{Ad_Label:"1/8H – ", Ad_Width:0.5875, Ad_Height:0.3675, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/8V – ", Ad_Width:0.26875, Ad_Height:0.785, Ad_Text_Angle:90}, ¬
{Ad_Label:"Junior (GOLF) – ", Ad_Width:0.8, Ad_Height:1.62, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/3V (GOLF) – ", Ad_Width:0.375, Ad_Height:1.62, Ad_Text_Angle:90}, ¬
{Ad_Label:"1/3sq. (GOLF) – ", Ad_Width:0.8, Ad_Height:0.785, Ad_Text_Angle:0}, ¬
{Ad_Label:"1/6V (GOLF) – ", Ad_Width:0.375, Ad_Height:0.785, Ad_Text_Angle:90}, ¬
{Ad_Label:"Directory Listing Only – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}, ¬
{Ad_Label:"INSERT (# in notes) – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}, ¬
{Ad_Label:"Other (See Notes) – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}, ¬
{Ad_Label:"------------ – ", Ad_Width:0.3, Ad_Height:0.3, Ad_Text_Angle:0}}
set Position_Width to number
set Position_Width to 11.375
set Position_Height to number
set Position_Height to 1.875
set Jump_Height to number
set Jump_Height to 0
set Variable_Count to number
set Variable_Count to 0
set Variable_Height to number
set Variable_Height to (1.875 + (1.62 * Variable_Count))
set Last_Ad to number
set Last_Ad to 0
tell application "QuarkXPress"
activate
try
display dialog "WARNING: This version of 'Dummy Square Maker' runs much slower than the last version, a confirmation will tell you when you are finished. Please be patient." & return & return & "Make sure to have the text box selected" buttons {"Cancel", "Accept"} default button 2 with icon caution
set ThisBox to object reference of current box
tell story 1 of ThisBox
set (every paragraph where it is return) to ""
set style sheet of every text to null
set style sheet of every text to "DUMMY TEXTS"
repeat with i from 1 to (count of paragraphs)
try
tell paragraph i
set ThePage to my get_CurrentPage()
try
if it contains " – " then
set style sheet to "AD SIZE"
set Ad_Size to contents
set {This_Width, This_Height, this_angle} to {"", "", ""}
repeat with This_Ad in Ad_Props
if Ad_Size contains (Ad_Label of This_Ad) then
set This_Width to Ad_Width of This_Ad
set This_Height to Ad_Height of This_Ad
set this_angle to Ad_Text_Angle of This_Ad
exit repeat
end if
end repeat
set Ad_Box to my Make_Box(ThePage, {1.875, 10.875, This_Height + 1.875, This_Width + 10.875}, this_angle)
duplicate contents to (end of Ad_Box)
else if it contains "—" then
set style sheet to "AD REP/PLACEMENT"
duplicate contents to (end of Ad_Box)
else if it starts with "©" then
set style sheet to "AD REP/PLACEMENT"
delete (character 1)
duplicate contents to end of Ad_Box
if Position_Width ≤ 19.75 then
set Jump_Height to Jump_Height + This_Height
(*_________________This is where Ad Boxes Stack_________________*)
if (Jump_Height ≤ 1.62) then
set origin of bounds of Ad_Box to {Position_Height, Position_Width}
set Position_Height to Position_Height + This_Height
(*_________________This is where Ad Boxes more right_________________*)
else
set Position_Height to Variable_Height
(*set Position_Width to Position_Width + This_Width + 0.05*)
set Position_Width to Position_Width + Last_Ad + 0.05
set origin of bounds of Ad_Box to {Position_Height, Position_Width}
set Jump_Height to This_Height
set Position_Height to Variable_Height + This_Height
end if
set Last_Ad to This_Width
(*_________________This is where New Row appears_________________*)
else
set Position_Width to 11.375
set Variable_Count to Variable_Count + 1
set Variable_Height to (1.875 + (1.62 * Variable_Count))
set Position_Height to Variable_Height
set origin of bounds of Ad_Box to {Position_Height, Position_Width}
set Position_Height to Position_Height + This_Height
set Jump_Height to This_Height
set Last_Ad to This_Width
end if
else
duplicate contents to (end of Ad_Box)
end if
end try
end tell
on error errmsg number errnum
display dialog "There has been an error " & "[" & i & "] (" & errmsg & " [" & errnum & "])" buttons {"Okay"} default button 1 with icon stop
end try
end repeat
delete contents
set style sheet of every text to null
end tell
beep 2
display dialog "Automation Finished" & return & return & "IMPORTANT NOTE: Color your Ad Squares according to Sales Rep, and select them all and 'BRING TO FRONT [F5]', this is VITAL." buttons {"Okay"} default button 1 with icon stop
on error errmsg number errnum
beep 3
if errnum ≠ -128 then
beep
display dialog errmsg & " [" & errnum & "]" buttons {"OK"} default button 1 with icon stop
end if
end try
end tell
on Make_Box(ThePage, TheBounds, this_angle)
local ThePage, TheBounds, this_angle
tell application "QuarkXPress"
tell page ThePage of document 1
set Ad_Box to make new text box at end with properties {bounds:TheBounds, vertical justification:centered, color:"Rep_Other", shade:100, opacity:10, text angle:this_angle, frame:{style:solid line, color:"Black", shade:60, width:0.1}}
end tell
end tell
(*end tell*)
return Ad_Box
end Make_Box
on get_CurrentPage()
tell application "QuarkXPress"
tell document 1
return page number of current page
end tell
end tell
end get_CurrentPageHi,
I think with this, you can already make good progress in your work.
Good luck!
global mydocument
tell application "Adobe InDesign CS5.5"
set mydocument to active document
tell mydocument
set myParaStyle to paragraph style "DUMMY TEXTS"
tell page 1
set TheBounds to {0, 0, 20, 50}
set Ad_Box to make text frame
tell Ad_Box
set geometric bounds to TheBounds
set vertical justification of text frame preferences to center align
set contents to "This is the contents"
end tell
set myStory to parent story of Ad_Box
set applied paragraph style of every paragraph of myStory to myParaStyle
end tell
end tell
end tell
Your two handlers then look like this:
on Make_Box(ThePage, TheBounds, this_angle)
local ThePage, TheBounds, this_angle
tell application "Adobe InDesign CS5.5"
tell page ThePage of mydocument
set Ad_Box to make text frame
tell Ad_Box
set geometric bounds to TheBounds
set vertical justification of text frame preferences to center align
end tell
end tell
end tell
return Ad_Box
end Make_Box
on get_CurrentPage(CurrentTextFrame)
tell application "Adobe InDesign CS5.5"
tell mydocument
return name of parent page of parent page of CurrentTextFrame
end tell
end tell
end get_CurrentPage
Shorter version:
on get_CurrentPage(CurrentTextFrame)
tell mydocument of application "Adobe InDesign CS5.5"
return name of parent page of parent page of CurrentTextFrame
end tell
end get_CurrentPage
Ce message a été modifié par: OlivierBerquin -
Need help converting from Actionscript 2.0 to 3.0
I have an old flash file that I need to update. Ufortunately I only ahve access to Flash Pro CC and when I open the file it says the program no longer supports Actionscript 2.0. When I test the file, I get the following compiler errors:
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 7, Column 3
1120: Access of undefined property ratio.
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 7, Column 20
1180: Call to a possibly undefined method number.
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 7, Column 27
1120: Access of undefined property _root.
Symbol 'MoneySlider', Layer 'AS', Frame 1, Line 9, Column 27
1120: Access of undefined property ratio.
And on the MoneySlide layer in Actions:
this.ratio = 0;
this.loadBar._width = 0;
this.dragger.ratio.text= "$0";
dragger.onPress=function(){
this.startDrag(true,0,0,line._width,0);
this.onEnterFrame=function(){
ratio=Math.round(number(_root.transitBenefitLimit/100)*(thi s._x/(line._width/100)));
loadBar._width = Math.round(this._x);
dragger.ratio.text= "$"+ratio;
dragger.onRelease=dragger.onReleaseOutside=stopDrag;
Any help changing the code to be compatible with Actionscript 3? thanks in advance...as3:
this.ratio = 0;
this.loadBar.width = 0;
this.dragger.ratio.text= "$0";
dragger.addEventListener(MouseEvent.MOUSE_DOWN,downF);
var dragged_mc:MovieClip;
function downF(e:MouseEvent):void{
dragged_mc=MovieClip(e.currentTarget);
dragged_mc.startDrag(true,0,0,line.width,0);
dragged_mc.addEventListener(Event.ENTER_FRAME,enterframeF);
stage.addEventListener(MouseEvent.MOUSE_UP,upF);
function enterframeF(e:Event):void{
ratio=Math.round(Number(MovieClip(root).transitBenefitLimit/100)*(dragged_mc.x/(line.widt h/100)));
loadBar.width = Math.round(dragged_mc.x);
dragger.ratio.text= "$"+ratio;
function upF(e:MouseEvent):void{
stage.removeEventListener(MouseEvent.MOUSE_UP,upF);
dragged_mc.removeEventListener(Event.ENTER_FRAME,enterframeF);
dragged_mc.stopDrag(); -
Need to convert to labview 11 from labview 12
hello
I need to convert the following Labview 12 VIs to Labview 11.
thank you in advance
Attachments:
QAM Demodulation.vi 30 KB
QAM Modulation.vi 30 KB
rx QAM.vi 57 KBThe conversion was done here: http://forums.ni.com/t5/Version-Conversion/need-to-convert-from-Labview-12-VI-to-Labview-11/m-p/3021...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
I have a drvier code from Watlow that I need to convert from 2009 to 2013 and is attached. Could someone help with this?
Attachments:
Example Cntl.ctl 5 KBJust open them up in LabVIEW 2013 and save them.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions -
Convert from NVARCHAR2 to Unicode in SQL Plus
I need to convert from NVARCHAR2 column data to Unicode format in a query. How can I do this?
I need to convert from NVARCHAR2 column data to Unicode format in a queryMaybe with convert:
SQL> select convert(n'ABC', 'utf8') abc from dual;
AB
┐
1 row selected.? -
Need to convert language from English to Thailand
Hi Gurus,
Can any one let me know the procedure of language conversion,
like i need to convert the available statement in report from English to Thailand.
Is their any function module to convert, please let me know.
thanks
balu.Hi,
Do you want text in Thailand , when your logon language is English that to dynamic text ? is it so.
If not I think you can do this using Translation .
Mintain text-elements and then GOTO -> Translation.
When you logon in that particular language then it will be displayed in that language only.
Regards,
Rajitha. -
Need to convert VI from 8.0 - 7.1 - 7.0
I have an 8.0 VI that I need to convert to version 7.0. Looks like 8.0 can only convert to 7.1. Does anyone know where I can download the evaluation for 7.1 so I can do the 7.1 -> 7.0 conversion?
Thanks.There is no evaluation version for 7.1. Typically you only get eval versions for the ".0" releases...6.0, 7.0, 8.0, etc. If it's only a few VIs, you can post your 7.1 VI(s) on these forums and someone will surely convert them for you.
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman -
Need to Convert Comma separated data in a column into individual rows from
Hi,
I need to Convert Comma separated data in a column into individual rows from a table.
Eg: JOB1 SMITH,ALLEN,WARD,JONES
OUTPUT required ;-
JOB1 SMITH
JOB1 ALLEN
JOB1 WARD
JOB1 JONES
Got a solution using Oracle provided regexp_substr function, which comes handy for this scenario.
But I need to use a database independent solution
Thanks in advance for your valuable inputs.
GeorgeGo for ETL solution. There are couple of ways to implement.
If helps mark -
Need to convert PageMaker 6.5 Plus files from Windows XP to PDF for Windows 7.
I need to convert PageMaker 6.5 Plus files into PDF from a Windows XP operating system to a Windows 7 operating system. It tells me I need a postscript printer. I don't have a postscript printer and really don't want to print them. I just want to transfer the files from Windows XP to Windows 7. Help!!
No, it isn't telling you that you need a PostScript printer. It's telling you that you need a PostScript printer DRIVER, which is software, not a printer.
Use the Add Printer function to add an Apple LaserWriter IINTX. That's a PostScript printer. Then try again.
I don't quite understand the Windows 7 connection, though. What are you hoping to achieve by making a PDF. You WON'T be able to edit them, if that's the idea. -
Need to convert lab from UNIX to DOS
I need to convert this lab from Unix so that it will run as a batch file in Windows (substitute with the appropriate commands). (I will definitely be starting some UNIX classes soon).
FILE=${1:?'Parameter 1 should be set to file name'}
BLOCK=${2:?'Parameter 2 should be set to block to be corrupted''}
BLOCKSIZE=${3:?Parameter 3 should be set to blocksize'}
dd of=$FILE bs=$BLOCKSIZE conv=notrunc seek=$BLOCK <<EOF
CORRUPT
EOF
dd of=$FILE bs=$BLOCKSIZE conv=notrunc seek='expr 1 + $BLOCK' <<EOF
CORRUPT
EOF
dd of=$FILE bs=$BLOCKSIZE conv=notrunc seek='expr 2 + $BLOCK' <<EOF
CORRUPT
EOF
dd of=$FILE bs=$BLOCKSIZE conv=notrunc seek='expr 3 + $BLOCK' <<EOF
CORRUPT
EOFLook up the SimpleDateFormat class: http://java.sun.com/j2se/1.4.2/docs/api/java/text/SimpleDateFormat.html
Arwinder wrote:
This is absolutely necessary... any help plz..For you maybe, not others. Please refrain from trying to urge others to answer your queries. They'll do it at their own pace ( if at all ).
People on the forum help others voluntarily, it's not their job.
Help them help you.
Learn how to ask questions first: http://faq.javaranch.com/java/HowToAskQuestionsOnJavaRanch
(Yes I know it's on JavaRanch but I think it applies everywhere)
----------------------------------------------------------------
Maybe you are looking for
-
Change "sent from iPhone" in mail
How to change "sent from my iPhone" for mail.
-
Good afternoon, When I run my Oracle Report from my form, Oracle appends random information at the end of the report name saved on the report server. Is there some way of stopping that? or is there some way of finding out the complete output filename
-
...and i am trying to get it unlocked. I cannot get help from applecare online because I don't have the packaging handy and the phone is locked (re: serial number). What do I do? I forget what operating sustem is on it. My son was using it in July
-
Loadsharing between 2 Datacenters
Hi, I have been assigned the following challenge: a customer wants to build 2 datacenters and connect these to a L3 backbone. I have attached a (very) simplified network diagram. Challenge: The customer wants to span a L2 domain across both DCs and
-
Due to unexplained charges to my itunes account I just changed the email address and password associated with the account. Now I cannot access icloud on my iphone 4s or on my ipad. Help!?