Need visio stencils for ASA5525, ASA5545 and ASA5555 firewalls

I've looked at the latest Security-Cisco ASA 55xx stencils on Cisco's website dated Feb 2012 (http://www.cisco.com/en/US/products/hw/prod_cat_visios.html) and they still don't have stencils for the ASA5525, ASA5545 and ASA 5555.  When can those be ready?

Hello,
I also had some problems, this was the path taken;
> http://www.cisco.com/en/US/products/hw/prod_cat_visios.html
> All Visio Products
> product_visio_icon0900aecd80095127.zip
> Security-Cisco ASA 55xx_04.13.11.zip
These did not include the X series.
This however does;
http://www.cisco.com/en/US/prod/assets/visio/products_visio_icon0900aecd8050a7d7.zip
Cheers,
James.

Similar Messages

  • Needing Visio Stencil for WS-X6716-10GE card

    Can't find it in the Catalyst 6500 switches .zip - anybody know where I can find it?

    Hello,
    Indeed, you will need WS-F6k-DFC4-EXL. WS-X6716-10G will be supported with SUP2T with that DFC upgrade.
    Please refer
    http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/15.1SY/release_notes.html
    Haihua

  • I want to download Visio Stencils for ADF Faces

    Dear members
    I read about Visio Stencils for ADF Faces and I really Like it.
    https://blogs.oracle.com/jdeveloperpm/entry/adf_faces_stencils_for_visio_available_on_samplecode
    And I want to download it. Has any one tried it before.Can any one tell me where can I download it.
    The articular says that it is Available through samplecode.oracle.com but i cannot find it
    please help
    thanks

    http://www.oracle.com/technetwork/indexes/samplecode/jdeveloper-adf-sample-522118.html
    Still down to http://download.oracle.com/otn/samplecode/ADF_Faces_Stencils_for_Visio.zip
    you need to accept the license before download.
    Timo

  • Visio stencil for ace module

    I've been searching but i can't find the visio stencil for the ACE-10 or ACE-20 module.
    Can anyone point me in the right direction or is this stencil yet to be made ?

    I don't think they are available yet. I needed them a few months ago, couldn't find them, and ended up making my own.
    In case you need it, here's a link to the stencils Cisco provides.
    http://www.cisco.com/en/US/products/prod_visio_icon_list.html

  • Unable to find visio stencil for 6506-E FourX Adapter

    Hi
    Where can i find the visio stencil for Cisco 6506-E FourX Adapter for 10 Gigabit Ethernet Mode. I found the WS-X6904-40G-2T module but I unable to find the FourX 10G Adapter for it.
    Thanks in advance,
    Martin John

    Hi,
    I was also getting same error, which is solved now.
    For reference following is what we need to check.
    - Proper mapping of source data to endeca dimension is made.
    - You have made entries in "dimension_values.csv" but dimension is not specified in "schema.csv"
    HTH
    MS

  • Update Visio Stencils for UCS

    Hi
    Would it be possible to update the Visio stencils for the Unified Computing System.  There are a number of servers missing as the stencil hasn't been updated since 2012, one in particular is missing and that's the C240M3 LFF chassis.  Also there is no option for disks etc
    Many thanks
    Mike                  

    I too am looking for stencils.  Even the Voice_IP_phone stencil is
    missing all the new series phones, such as the 69xx, 89xx and 99xx models.
    Anyone know where to even open a request for the new ones, or is everyone not using Visio anymore?

  • Visio Stencils for Cisco Equipment

    Does anyone know where you can obtain some good visio stencils for cisco equipment like routers, switches, gateways, cables, ports, etc.  The default ones in Visio leave much to be desired.  Any input appreciated - thanks.

    I too am looking for stencils.  Even the Voice_IP_phone stencil is
    missing all the new series phones, such as the 69xx, 89xx and 99xx models.
    Anyone know where to even open a request for the new ones, or is everyone not using Visio anymore?

  • Visio Stencil for HWIC-1GE-SFP

                     Does anyone know if there is a visio stencil for the HWIC-1GE-SFP for a 2951 router?  I have looked through the index of stencils, but it is not listed there.  Any suggestions would be appreciated.  Thanks!
    Gil

    Hi Bruno,
    I have just emailed the product group to request funding for the following:
    EHWIC-4ESG
    EHWIC-4ESG-P
    EHWIC-D-8ESG
    EHWIC-D-8ESG-
    EHWIC-4SHDSL-EA
    EHWIC-1GE-SFP-CU
    Those are all of the EHWIC module part numbers that I could find. We are dependent upon the product groups to authorize and fund the Visio work and hopefully I will hear from them soon.
    Regards,
    Brett Newman
    Cisco Visio Production
    Visimation Inc.
    www.shapesource.com

  • Does anyone have current Visio stencils for the newer wireless products?

    Does anyone have the latest Visio stencils for Cisco's wireless products?  Specifically looking for 3502 and 1260 series access points and the 5508 series controllers.
    Thanks in advance!

    Cisco does not seem to have an official stencil for the 5508.  However I found this link and it seems to have 5508 stencils:
    http://www.4shared.com/file/m_dueG18/Cisco-WLC-5508.html

  • Visio stencil for a 3500XL

    I need a visio stencil for the 3500XL series switches.  I've found the ones offered on the cisco site for 3500 series switches but they are only for the 3550 switches.  Can anyone point me in the right direction or happen to have the old 3500XL stencils??

    They are similar ... but not the same.  I've heard there are older stencils for the 3500XL out there but can't seem to track it down.

  • I need iOS 5 for "Drive Google" and " i Cloud" where and how do I get to download it?

    I need iOS 5 for "Drive Google" and " i Cloud" where and how do I get to download it?

    You have to update by using a computer via the latest version of iTunes. You can connect the iPad to your computer and launch iTunes. Select the iPad on the left side under the devices heading. Click on the Summary Tab on the right. Click on Check for Update.
    After you update to iOS 5 or later, you will have Software Update in you settings and can update via WiFi OTA. If you have the iPad 2 - you will be updating to iOS 6.0.1.
    If you have the original iPad - iOS 5.1.1 is as high as you can go.
    How to update to iOS 5 or later.
    http://support.apple.com/kb/HT4972

  • Upgrading from 10.4.11 to 10.7. What are the steps and do I also need to pay for 10.5 and 10.6 along the way?

    Hi. I wannt to upgrade from 10.4.11 to 10.7.
    What are the steps and do I also need to pay for 10.5 and 10.6 along the way?
    According to the 10.7 lion page on 'store' it says that you need 10.6 to use it does this mean I'm going to have to do 3 upgrades?
    Thanks

    Why do yoy want Lion/10.7???
    Anyway, if your Mac meets the requirements you can skip 10.5.x, and even 10.6.x if you can afford to erase all your data.
    Snow Leopard/10.6.x Requirements...
    General requirements
       * Mac computer with an Intel processor
        * 1GB of memory (I say 4GB at least)
        * 5GB of available disk space (I say 30GB at least)
        * DVD drive for installation
        * Some features require a compatible Internet service provider; fees may apply.
        * Some features require Apple’s MobileMe service; fees and terms apply.
    Which apps work with Mac OS X 10.6?...
    http://snowleopard.wikidot.com/
    It looks like they might still have it...
    http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
    If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
    Lion/101.7 System requirements
        •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
        •    At least 2GB of memory[14]
        •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
        •    At least 4GB of disk space for downloading[14]
    Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
    Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
    http://en.wikipedia.org/wiki/Mac_OS_X_Lion#System_requirements
    http://www.apple.com/macosx/how-to-buy/
    What applications are not compatible with Mac OS X 10.7 "Lion"?
    http://ow.ly/5Iz09
    http://roaringapps.com/apps:table

  • HT1495 I have moved to live in Abu Dhabi. I have an iPhone with UK chip that I need to keep for UK contact and business, but now want to buy an iPhone in Abu Dhabi with a UAE chip for local use in AUH. Can I have them both sync'd, and also my other device

    I have moved to live in Abu Dhabi. I have an iPhone with UK chip that I need to keep for UK contact and business, but now want to buy an iPhone in Abu Dhabi with a UAE chip for local use in AUH. Can I have them both sync'd, and also my other devices??

    SkyDaughter29 wrote:
    My current situation: I have soooo many texts on my iphone and I haven't deleted many because I need the information contained in them for future reference and for legal purposes.  I would really like to find a means and way to save them other than on the phone itself. I've done searches for various apps yet I'm not finding what I think I would need.  It appears Apple does not sync the texts between the iphone and my MacBook Pro.
    Try the computer apps PhoneView (Mac) or TouchCopy (Mac & PC):
    http://www.ecamm.com/mac/phoneview/
    http://www.wideanglesoftware.com/touchcopy/index.php
    Best of luck.

  • Visio stencil for ASA 5585-X?

    Hello,
    Can anybody help pointing me to where I can get a visio stencil for a asa-5585-x.
    I really appreciate it.
    Thanks,
    John

    Hi John,
    The official Cisco Visio stencils can be found here:
    http://www.cisco.com/en/US/partner/products/hw/prod_cat_visios.html
    I don't see the 5585 there yet, but once it's available that set should be updated.
    -Mike

  • Satellite 1000-Z2: I need a driver for the display and the LAN

    Hi
    I have reformatted my laptop S1000-Z2, and I am having real trouble trying to find any information on this model !
    Basically I need a driver for the display, and the LAN ?
    Best Regards,
    Austin.

    What OS do you use???
    If you use the XP you will not find the LAN driver on the recommended driver site!
    I can not give you any advices where to find such driver because I dont know what LAN card is installed in your oldie.
    But why you dont check this yourself? Try to find out what LAN card you use and googel a little bit for compatible applications ;)

Maybe you are looking for