Need way to add multiple entries in PPOMA_BBP for Buyer reference

We are looking at populating Positions in Organizational Responsibility for a given Purchasing group so that they appear at the top of all buyers. We have 100s of positions that need to be defined for a single buyer, is there an CATT script or tool to populate these entries. PResently this is done within PPOMA_BBP and only 3 blank entries are visible at one time. Please help!!!
SRM 4.0 EBP 5.0
Thanks
Bill Olliver

The issue we have is our org structure spans companies in Europe, of which they have different buyers, assigning the buyers by org structure will not suffice as the users in Austria don't buy from the buyer in Italy for example. We have had ZERO luck defining a way to default a buyer for the user, we are not using commodity codes /product category, so even if we gave everyone in Europe the 9 buyers, the system resets to the top buyer in the list if the category changes. Is there anything we can do to just allow the user to select a buyer for the default and allow that to be it going forward, regardless of product category changes??
If not, then I am assigning the positions of the employees directly into the buyer responsible, this way they will have that buyer at the top. Hence a means to perform this faster.
thanks

Similar Messages

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately.

Is there some way to add multiple addresses to an email I am sending that doesn't close the contact list after I click on an address? This necessitates constantly going back to click the + sign to add each address separately. Is there some way I can open the contact list, click on all of the individual addresses to which I want to send the email without the list closing between each address entry, and have all of my address entries be listed to the email at one time? Something like it works in Gmail. I do not want to use set lists, I want to enter different addresses each time I send an email. And I am a very slow typist, so I don't want to type the first few letters of each recipient's name. It is much faster for me to just click on the e-mail addresses in the list as a group. It doesn't make any sense to me to have to reopen the contact list for each address, when it should be so easy to click on all of the addresses I want at one time and then click once to add them all to the email as a group. If there is a solution to this, please tell me. Thanks.

Vatlily,
Try this:
1. Select Mail>File>New Message.
2. Select Mail>Window>Address Panel.
3. Use (command+click) on the desired addressees in the Address Panel to create the list.
4. Click "To:" on the top left of the Address Panel.
The group that you selected will be added to the "To" field in your New Message.

How to Add multiple entry to the group policy security filtering

How to Add multiple entry to the group policy security filtering
Is there any way we can add multiple entry to the Domain group policy Security filtering tab.Currently its not allowing to add more then one entry at a time.
Getting Error like "only one name can be entered,and the name cannot contain a semicolon.Enter a valid name"

Hi
Are you trying to add more users or groups through Group Policy Management Security Filtering tab?
Try right clicking on the policy and then edit
Then in Editor Right click on the name of the policy and Properties
Security tab and add user or group from this tab. Just make sure if you are adding user or groups "Select this object type" has
the correct option also "From this Location" is set to your entire directory not the local server.
Update us with the above.
Thanks

Is there a way to add multiple borders to a single cell with one click or do I have to add one border at a time for example, one cell with borders on three sides?

I would like to know if there is a way to add multiple borders to a single cell or selection of cells in one click. At this time, if i want to add for example a top border and a bottom border to a single cell I have to do this in two steps: first select the top border, style, thickness, and color, and then next select the bottom border, style, thickness, and color. Is there a way to select the top and bottom border of a cell in one click? Clicking on the top border then holding down the command key while selecting the bottom border does not work, nor does holding down the option key, the control key, or the shift key work. Thanks for your help.

Thank you for the suggestion but this did not work for my Mac. When a cell is selected for which I want borders, the entire cell is lit up. Then when I go to the border tool and select style, thickness, and color, the entire lit up cell takes on the border, that is the Outside Edges of the cell now have a border. So selecting the style, thickness, and color first doesn't work.
If I select the top border first (or any border), the drop down goes away and I can't select multiple borders - I get to choose one at a time. After selecting one border, style, thickness, and color, said border is now on the spreadsheet. Then I go back to the border selection and pick another border and the the previously selected style, thickness, and color reverts to null, so I start over with the new border style, thickness, and color. Yes, it is tedious.
The Fix would allow the user to select multiple borders, say left and right, before the drop down goes away after selecting only one border
Does it have something to do with Allow or Disallow border selection?
I have Numbers '09 version 2.1 (436)

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

Is there a way to add multiple agents to a skill group at once?

Hi All,
Is there a way to add multiple agents to a skill group at once by using bulk edit or some other means?
I am using ICM 8.0
Thanks in advance.

Hi Piyush,
There is a tricky way of doing it in the config manager. Say for example, if you have 100 agents to be added, rename the agent so that they get listed first while adding to the skill group. This will reduce the effort of searching the agents. You can scroll and select the total number of agents till it is renamed and revert back once added to the skill groups
Hope this helps
Cheers,
Dass
Please rate useful posts

Fastest way to add multiple images, one after the other, in DW5.5

There has to be a faster way to add multiple images, one after the other, in a web page rather than just dragging each from the Files tab w/in DW 5.5
I was a little surprized I couldn't select multiple images and just drag a block and have DW just insert an img tag with empty alts and the source path but maybe there is some options I just haven't found?
I tried using Bridge to generate a quick html slideshow/gallery but it creates skads of divs and such... I just have to update an older site and was looking for an efficient way to add a bunch of images (random names ugh so just copying-pasting one and changing names is still more manual) that lie next to each other, no breaks inbetween....seems an ideal automated situation.
I'd settle for an external script or app or something because they come in blocks of 25 approx and I have all my actions in PS set up to size appropriately which is nice so I just wondered if there was something good for this low-level production task.
Thanks

Thanks. Yes, I started writing a script but I just wondered if there were hidden gems in DW....so many programs do more than they are intended to do nowadays, I had to ask people who use it more!
Actually, the fastest was to just dupe one line of code, paste x amount and then just use the pick-wip to point and drag. That at least cut the menu out of the equation.
I thought I remembered doing a batch insert years ago..maybe in GoLive or before Adobe had DW? DW and GoLive are the only GUI html editors I've ever used..but, may it was just something out of an ealier photoshop...they've taken good stuff out and put good stuff in so many times that I can only remember so much!

How do I add multiple rows in Numbers for iPad?

how do I add multiple rows in Numbers for iPad?

Hi James,
On the iPod I can only insert what is on the clipboard but I can insert however many rows I have there. Is it working differently for you? Benjoon seemed to think that he could not do this in Numbers. He was ruling Numbers out because of it. He doesn't need to do that because of this issue.
If I was needing to insert multiple blank rows often I might keep a table of blank rows or just some blank rows at the end of the working table that I could copy/paste. This is no different than Numbers on the Mac.
quinn

How to add multiple entries at once

Hi,
I need to define Tax Jurisdiction codes under tax on sales/purchases node and i have almost thousands of entries. Is there a way to add all at once ????
Please let me know..
Thanks,
adv

Hi,
Tax jurisdiction code can not be defined in mass in customization. You can enter entries by copy paste in a lot of say 12 entries at a time.
If the entries are very huge, you can define a temporary LSMW in dev system to do below steps:-
1. Call SM30 for view V_TTXJ
2. Click on maintain button and enter the work area of your tax procedure
3. Click on "New Entries" button"
4. Pass the enty
5. Save.
Just think whether you really need LSMW for it, as it might be one time needed. and you could also manage to upload the entries manually.
Regards,
Gaurav

Quick way to add multiple transitions?

Hi
I producing a slideshow of about 100 still images and want to put a cross disolve between each picture. Is there a way to add all the transitions in one go?
Many thanks.
Adrian

P.S You may wish to change the duration of each clip to about 5 seconds ,the default I think is 10 which may be a bit too long.
If you know how to do this then please ignore the following. In the browser next to each clip you will see the duration tag - click in the duration and enter 5 instead of 10.
Then drop all the clips in the canvas with the insert with transition option.
To change the length -style of the transition applied to all the clips you then simply select all the clips on the time line (click on timeline and command click + a) then drag them to the viewer. You can now edit the effects parameters.
Also, if you wish to change to the effect applied to all the clips you can by changing the effect from the effects menu at this point. This will then replace the effect displayed in the viewer, to the top right of the viewer you will see a icon with a hand over it, drag and drop this to the canvas and the effect will change on all the clips.
If you know all the above, which you probably do, then sorry for going over old ground.
Im probably doing it wrong anyway.
Thanks
Lee

Need help Setting up Multiple Static Ip , 1 for each port of the fios router

Need help Setting up multiple Static Ip on my fios router
I have been trying to figure out how to set up multiple ip in my fios router.
However I kind of managed how to set up multiple static ip However the way I want it is for each port of my router to have an external ip signed to it. ( like 4 different modem in 1 )
Verizon gave me 5 static ip but they can not help me how to set it up.
Have anyone here done more then one static ip on different ports? I assume that the process will be the after the second static ip.

You want to set up Static Nat. You will not assign the IP to a port, but rather to a local machine. Figure out what machines you want your IP's to go to. Under the firewall section you will see static nat. Pick the machine you want and enter one of the IP's you were assigned.

Multiple entries in TEVEN for one time event created by HR-PDC

Hi experts,
we have a SAP certified time attendance system connected to our ERP 6.0 system by HR-PDC interface.
Now it happens from time to time that exactly one time event causes multiple entries in SAP table TEVEN and therefore is shown in the check report PT40.
The number of duplicate records is always different - up to about 140 entries for one and the same time event in the worst case.
Except the field PDSNR all the other fields contain exactly the same values.
I have checkt many of the problematic bookings and I have always just one correct time event in the source application and there is only one data record in the corresponding IDOC too.
Also the number of transferred records shown in the protocol spool of the report SAPCDT45 is correct and identical to the number of records in the IDOC.
The first place where I can identify the problem with the duplicate records is the table TEVEN.
No records are left in the interface table CC1TEV.
I have seen that within one block of identical time bookings in TEVEN the field PDSNR ist not numbered in one sequence but there are gaps in between that are used for any other entries.
As I can see in historical entries of TEVEN the problem exists already for years so it does not seem to be in direct connection with the latest support pack or something like that.
The relevant jobs run every 15 minutes whereby SAPCDT45 is started 5 minutes after RPTCC106.
Has anyone else experienced this strange behaviour or knows what I could further investigate?
Many thanks for your replies in advance and best regards
Günter

Hi Carlos,
thanks for your fast reply.
It seems that an entry for Status A00 or A05 would solve my problems and of course I will try to handle it by this view.
But do you know whether there is any possibility to find out how it comes to these repeated postings?
I do not know whether the repeated postings happen in the same package (IDOC) or in an earlier package and to be honest I do not think that the record comes from the source application a second time because there I could find only one record that seems to be correct.
I also cannot understand how it comes that I have even 140 "identical" entries for one time event.
Could you please let me know your thoughts about that?
Anyway I thank you for offering a solution - even if I do not understand the reason for the pborlem.
Thanks and best regards
Günter

Is there a way to add multiple outlines on the same layer?

Hi there! I'm trying to add an outline to text or objects through the style fx, then I want to add more outlines. It would be nice if you could just add a new stroke like in illustrator. I don't want copy the layer and just do a thicker outline behind it, the point is to have it all on the same layer .. just wondering if thats possible. Thanks!

You have been given two approaches which may meet your needs. There is another way that offers independent control of the styles, but you do use multiple layers.
Assume you have a path that defines your object and lets say you want to apply three different styles and have independent and ongoing control over each. Create a new blank layer for each style. On each of those layers apply a brush stroke to the path, say a 1 pixel stroke whose color is also the background color as an example. Now on each of those layers apply your chosen layer styles. That is what I have done in this example:
Paulo

Is there a way to add multiple categories columns to my enterprise wiki page

Hi All,
I have the following inside my SharePoint 2013;
Enterprise wiki site collection.
By default I got one category column for my enterprise wiki site.
I link the defualt wiki category (of type managed metadata) to a term store.
I am trying to achieve the following:-
I need to add additional wiki categories (of type managed metadata) and link them to different term store.
For example when a user add a new wiki page , he can select the default wiki , in addition to that he can
a customer , sub-topic, country , etc.
What I tried is :-
I went to the wiki library and from there I added a new site column of type managed meta data.
I link the new column to a second term store, and I did the same for the other wiki categories.
The problem I am facing:-
The new wiki categories were not displayed when adding /editing/viewing the wiki pages?
Can anyone advice how I can add the new wiki categories , so that users can fill them when add/editing a wiki page , also how to show them under the defualt wiki category when reading any wiki page?
Thanks

Number of Chapters in iMovie is not known by me but if You aim to do a DVD then there is a problem.
iDVD has some limitations
• 99 Chapters maximum !
• 60 resp 120 minutes limit (Movie + Menu duration) on SL-DVD and about double on DL-DVDs
I would divide material onto two DVDs then I get 198 Chapters and 120 to 240 minutes on SL-DVDs
Note thar MENU can take up lot's of time - 15 minutes o even more.
I use Old Theme and "Brushed Metal" no Animation and No Audio on Menu - to keep this under one minute.
Yours Bengt W

Is there a way to add multiple search bars visible at the same time (Amazon, Ebay, etc.) rather than clicking through them?

Like, instead of clicking to pick the one you want, have 3 or 4 available on the toolbar all the time. I saw something called Thinger that does it, but that was from Firefox 3.

Is there a way to choose the contacts you want to include in a send field in ONE step like we used to be able to do in the last version of this app?
No. You can kind of do it by dragging from the Contacts app, but the default address (first in list, I think) will be used. I you have contacts with multiple email addresses, you’d have to go to each in the address field and select the correct one.

Need way to add multiple entries in PPOMA_BBP for Buyer reference

Similar Messages

Maybe you are looking for