Need way to share for more than 5 users
I have a ned to be able to share Itunes with more than 5 users.
Is there any way to do this?
Is there other software that will allow me to do this?
Here is why. I have a school that has an internal 100 meg network and only a 1.2 meg to the internet. I want to set up a Mac so that all my users both Mac and PC can share the music on our internal network.
Any suggestions of where i might go to start would be greatly appreciated.
Dual G5, 2.0ghz, Mac OS X (10.4.6)
You may move your audio tracks to a public folder on your network and point each iTunes music folder to it.
It would be very similar to this description: http://docs.info.apple.com/article.html?artnum=93195
Similar Messages
-
I and my brothers and sisters use the same desktop , so we need to subscribe for more than a single sync account , and I don't know how. Thank you
If you each have a separate Windows account then each of you should automatically have a separate Firefox profile.
If you use the same Windows account (not much privacy in that case) then you will have to create a separate profile for each of you and a desktop shortcut to start each profile.
* http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
* http://kb.mozillazine.org/Shortcut_to_a_specific_profile
* http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox -
Lock user ID which are kept idle for more than 30 mints.
Dear All,
My requirement is as follows.I need one batch job to lock all user IDs in producrtion system if the user Id is kept idle for more than 30 mints.
Can you pls let me know how I can do it and under which tables the user Ids are stored and is there any standard program that I can use to fullfill my requirement.
Thanks to all of you for your support.
Rgds,
BabuDear,
First suggestion - contact your BASIS team.
Secondly, please check the below:
Logging off the inactive users is not set up by default. Setting up the feature of logging off the users improves the security as unattended terminals do not stay active indefinitely.
To activate automatic logging off, do the following:
Go to Profile Maintenance by choosing Tools --> CCMS --> Configuration --> Profile Maintenance or the transaction RZ11.
Maintain the parameter rdisp/gui_auto_logout. Enter the required number of seconds of inactivity before the user is logged off automatically.
To deactivate automatic logoff, delete the parameter from the profile(s) or set the value '0'.
Regards,
Syed Hussain. -
Solaris users who did login for more than months
Hello All,
Can any one help me out to find those users who did not login to the system for more than a month or more? I need to do some user clean up.
Thanks..
Edited by: user4027740 on Apr 13, 2011 12:35 AMUSERS=`grep -v NOLOGIN /etc/passwd | cut -d: -f1`
for USER in $USERS
do
echo "---------- $USER --------------"
last -n 1 $USER
done
############this script helps you find out the last login time of all users in /etc/passwd file################### -
Starttransaction for more than one user
Hi,
is there any FM, TCODE or customizing way
to set an starttransaction for more than one user?
I see the starttransaction in table ARR_DATEU under
ID = START_TCD.
Thanks.
Regards, DieterHi Thomas,
thanks for your answer.
I Find (by debugging) FMs: NAVIGATION_GET_START_TCODE and NAVIGATION_SET_START_TCODE.
Regards, Dieter -
SU01 user as reseller for more than one customer?
Hi,
We have a requirement where internet user act as a reseller and can place order for more than one customer in ISA R/3 edition. In the XCM configuration i have selected the user as R3_SU01UserStandalone and then followed the activity given in the SAP Document:
http://help.sap.com/saphelp_crm40/helpdata/en/03/f6ce51eb8e4dbe82b9ca75e5c74fe6/frameset.htm
Can anyone provide a solution what other steps i need to follow for this issue.
Thanks
AnkitDear Shankar
You have not specified whether the scenario is MTO or MTS. If it is MTO, stock will be allocated against sale order as and when MFBF is done. If it is MTS, then go to OMJJ, select Movement Type and give 292 and execute. Now select "Field selection (Enjoy)" tab on your left and there maintain the option as Required Entry for the field "KDAUF" and save.
Now go to MB1A, give movement type 292 with special stock W, plant and storage location and execute so that the system will ask for sold to party code. Give the sold to party code and enter material code, stock to be reserved and save.
If you see in MMBE now, those stocks will be displayed as special stock.
thanks
G. Lakshmipathi -
I need a new Battery for my I POD Touch. I POD will not hold a charge for more than 10 songs.
Model = M9800LL
Version = 1.4.1The battery in the iPod is not user-replaceable. Take your iPod to an Apple Store or contact Apple Support and they can arrange replacement.
http://www.apple.com/support/ipod/service/faq/
Regards. -
How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?
If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards -
I accidentally changed a setting on my ipod touch and now it won't change back. I have had my ipod for more than two years and i dont know what to do. If i go to the apple store, would they fix it, or would i need to get a new one? If it could be fixed, how much would it cost?
If it is still under warranty you can call the 800 number to apple and enter the serial number and it will tell you if it is under warranty or not if not its like $30 basically for them to help or something like that it said today when i called...
Or take it to a genius bar if you have one near?
Or further explain what setting you are needing fixed back and im sure someone here can help you for free! -
My ipod touch 4th generation no longer holds it's charge for more than 40mins from full power, think it needs a new internal battery but have no idea how to go about this and am no longer covered by my guarantee. Can anyone advise me on what's best? Thanks in advance
Using the battery level meter in this manner is comparable to using your car's fuel gauge to calculate miles per gallon. The only thing that matters is the total amount of operating time from full charge to auto-shutdown.
Use an Apple wall-mount charger. Do NOT use a computer's USB port. Then, operate it normally until auto shut-down (ignore any low level alerts that may appear). An irony is that doing that test to determine the total operating time is also the exact procedure necessary to calibrate the battery level meter.
I'm not claiming that you do not have a problem. I am stating, however, that we don't yet know whether or not a battery problem exists.
According to Apple:
Use Your iPod Regularly
For proper reporting of the battery’s state of charge, be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
Elsewhere, Apple elaborates and explains that two half-discharges (or four quarter-discharges, etc.) equals one full discharge. -
Kindly refer to Case Id No. 525700065 in India.I have talked to various people on my case for more than 5 hours ( Total talk time) The people give various different answers and aim really fed up now. What do i do?
Many apple phone users are especially fed up with RSGI Communication , Erandwana, Pune, Maharashtra, India.
Their service report No. 36679.
Allthough Mr Punit ( Technical Dept. Apple.) had requested RSGI to chance the device, still RSGI said they do not have the device ( I phone 5, white ,16GB) in stock.
Today when we contacted them they said they won't be able to replace OR order to Apple unless and until we do not keep the device with them for 3 days.
Mr Deepak of Technical Dept Apple was contacted who's telephonic Transript as proof is available with us.Who exactly are you addressing your screed to
There are no Apple Staff on this forum ,it is User to User -
OATS Load test is not able to scale for more than 10 users
Hi,
I am using OATS load test runner for performance testing Fusion based application on webcenter portal.I am not able to run OATS load tester sucessfully for more than 10 VU's.After that it gives a component not found issue or loop error.Please let me know if anybody faced similar issue and was able to resolve it.Is there some setting to be done?
Thanks,
Ritesh
Edited by: user766882 on Aug 20, 2012 9:07 AMHi Jean,
Our application contains customised retail webcenter portal on which retail application is hosted.This portal application is not able to scale up more than 10 users.I had created portal application without the customised framework and then for a similar usecase it is able to scale upto more than 50 users but once it hits 100 VU mark it starts giving errors.If it were an issue with client tokens or login,I would have been able to have more than 1 user at a time.It seems to be an issue with custom framework developed on top of webcenter portal.I have faced a similar issue while testing for this app with jmeter also.I was able to test for the webcenter portal app without any customisation for more than 100 concurrent users. But I was not able to test for more than 1 user for customised retail webcenter portal
Thanks,
Ritesh
Edited by: user766882 on Aug 21, 2012 8:25 AM
Edited by: user766882 on Aug 21, 2012 8:33 AM -
i cannot sit outside for more than 45 minutes without my ipad shutting down due to heat. is there a way to fix this?
What model iPad? What is the outside temperature?
When outside what are you doing on the iPad - running a graphic intensive app?
iPad operating ambient temperature: 0° to 35° C (32° to 95° F)
Cheers, Tom -
Still nothing about File Vault that needs a bug fix for almost every user. This is becoming even more disappointing!
Apple Enterprise Support is aware of this issue. They have specific instructions which attempt to remediate the issue, however, attempting on two different MBP laptops, so far has not succeeded.
The problem to be specific is - hang at login. The Filevaulted user account gets its password entered, then the "progress bar" mid screen will be seen to halt, never resuming. NVRAM resets dont necessarily cure this issue, but turning off FV2 definitely does.
We are seeing this with 10.10.2 fully Apple-SUS updated machines.
Feedback has been sent to Apple over this as well.
Im recommending:
a. turn off FV2 until such time as a Apple provided update cures it
b. consider the Sophos WDE solution if WDE is absolutely required (disclosure: I havent attempted this, not sure about its workability) -
I have a licence code for Adobe CS6 Master Collection which I'm using for more than a year, suddeny I am in trial mode (all programs) an it seems that this code is not accepted anymore. Help needed!!
Chat Now button near the bottom for Activation and Deactivation problems may help
http://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html
Maybe you are looking for
-
Every time I try to read my newspaper online using adobe it responds that there is a adobe file already open. I have tried to delete adobe and also to repair and neither works. I went to program add/delete and selected it and it won't do anything. He
-
Best way to update 60 iOS devices?
I have about 65 iPOD Touches, a few iPhones, and 6 iPADs. What is the quickest way to perform an iOS update? Currently, we do them one at a time and it takes a few days. Any help would be appreciated. Thanks! Rob
-
Does anyone know if there is a software to convert php to coldfusion or what is the quickest way to do this. We have extremly large sites which are all done in php and we prefer to use cf so my boss wants it converted. Any suggestions
-
Have successfully updated 2 items and Safari the last both are having issues. Safari opens but then stalls. I have reset and restored the iPhone and I am seeing the same issues.
-
How to become Oracle Functional Consutant
Hi I want to switch over to Oracle Functional side. How should I start and what path should I adopt to become an Oracle Functional Consultant? Thanx and regards. Anand