Need wifi network advice
I have an issue that I need help with
I am a musician who uses a MacBook Pro and an iPad for mixing live shows. My Laptop is connected via firewire to a digital mixer (Presonus Studiolive 24.4.2) the Laptop is running Virtual Studio Live (VSL) which lets you control the mixer from the laptop. For front of house mixing I use an iPad which has the VSL remote app on it which allows me to control VSL on the laptop to control the mixer from anywhere in the room. as long as the iPad and the laptop share the same wifi connection they are linked.
When there is no wifi in the area, which happens a lot, I create a network on the laptop and join it on the iPad. this has worked fine untill recently. I bought a new wireless microphone that is digital signal and the signal is up in the 2.4 ghz range, same as my wifi network, so now I am getting connection drop outs between the laptop and iPad.
So my question is, is there a way to set the laptops built in airport to a higher band, like up in the 5k range? I know the new airport base station is dual band, and i believe the MBP and the iPad can use those upper bands, but is there a way to select that on the MBP?
if there is anything else you think might help I am open to seggestions
is there a way to set the laptops built in airport to a higher band, like up in the 5k range?
Yes
I know the new airport base station is dual band...
Correct, but the potential issue you face here is that the base station is simultaneous dual band, meaning that while it can broadcast a 5 GHz signal, it is also broadcasting a 2.4 GHz signal as well....which cannot be turned off....and may still cause some interference issues.
One potential solution might be to enable the option to assign a different network name to the 5 GHz band and then "point" your Mac and the iPad at that network name to connect at 5 GHz.
A simpler, and also less expensive option might be to use the single band AirPort Express and set it to broadcast a 5 GHz network only. Then log on with your Mac and iPad to the network name that you assign when you setup the AirPort Express.
Similar Messages
-
New IPT Now I need wifi network upgrade
Well there are a few good deck days in Iowa. My current Express and original silver saucer Apple Airports just don't give me good coverage outside the house. Time to add another Express or go large with an Extreme. Anyone think there is an advantage with range of the Extreme over the Express? I heard that using a second Airport slows the output of the piggy backed Airport way down. But that has to be better than a one bar signal does it not?
(See guys, this is exactly why I wanted to draw the line at whether or not you can get the job done using CS4. All software will have issues at one point or another. You can't draw the line at does it work perfectly and expect the results to mean anything. The bottom line for potential customers is can they actually produce and collect that paycheck.
When I left the poll the tally was 11 for whom it works, and only 2 for whom it doesn't. That's pretty encouraging. What the hell did you guys do after I left to make Jeffery have to ask this question?) -
Just bought new time capsule- need help setting up WiFi network with another router
Here ismy situation.
I had a wireless network setup up at home using a Belkin wifi router.
I have 2 macBooks (1 pro, 1 air) and 2 iphones that connect wirelessly and a desktop PC that is hard wired to the ethernet port. In addition, I have a Verizon wireless network extender plugged in by ethernet. All of the hard-wired gear is in our 3rd floor attic office (and the wireless signal was strong throughout the house).
The Belkin wifi router was plugged into a wall ethernet jack that is in turn wired into a Linksys router in the basement (along with multiple other ethernet ports througout the house) and is hardwired to the Cable modem next to it. All of the hard-wired ethernet stuff (including the router in the basement) was there when we bought the house, and I have no clue in the tangle of wires how to sort them out (but don't really think I need to)
I just purchased a TimeCapsule to do wireless backups of my 2 macbooks, and tried to set it up alongside the existing wireless modem.
Needless to say, this did not work well. I called AppleCare, and was told that the TimeCapsule needs to be the "1st" wireless adapter, so I went into the basement, and connected the time capsule directly to the cable modem, and then out to the basement router. The Belkin router still needs to be in the attic to supply the PC and the Verizon adapter (so it is near a window for GPS signal).
If I try to name the WiFi network the same SSID on both the TC and the belkin router (to have dual signal strenth coverage) the whole thing gets messed up and the TC cannot be "found" by the aiprort Utility software.
What I have done now is that I have 2 side-by-side wireless networks with 2 unique names (actually 3, because I enabled the 5Ghz signal on the TC), but our wireless devices do not "switch" automatically from one SSID to another stronger signal SSID as we move through the house
Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.Here's the question: How do I name them the same so that the devices will switch effortlessly to the stongest signal? I understand it involves switching the "channels" but don't know how to do it right now. Currently, everything works, so I don't want to mess it up tinkering. Another caveat- there are several other wireless networks from neighbors houses that I can "see". I jsut downloaded a program called iStumbler that shows the channels, but not sure what to do with that info.
Any advice would be appreciated.
OK.. sounds like a mess.. or at least messy and the previous people should have left a log book with all the IP address info in it.. you have far too many routers.. but from here it is impossible to tell how they are configured. Most are probably just setup as AP.
Naming rule for wireless.. Same SSID same security different channel.
SSID ie wireless name to work on the PC side should have no spaces and no special characters. TC name should also follow that rule. So the devices need to all set with fixed channels.
Don't worry too much about iStumbler and what is outside your house.. there isn't enough channels at 2.4ghz anyway. And you are going to need to use them all. There are only three non-overlapping channels. 1, 6, 11 so set each device to one of those channels. The TC should be as close as you can to where you normally use the MacBooks.. and turn on the 5ghz. You will have to leave it to automatic name so the Macbook can also roam across from 2.4 to 5ghz. But if you care to use a different name and force it onto 5ghz the speed is much better as long as you are in the same room.
Roaming is great in theory.. often in practice it just doesn't work.. you need to step in and turn off wireless and then turn it back on.. you can quickly see which router it is connecting to by hold down the option key when you click the airport fan in the top menu area.. and look at bssid.. you will have to figure out which number MAC address relates to which router.
Also do not be surprised if Lion gives you issues. It seems to often drop out and lose connection to the TC as a backup device even if internet is still working. -
I have an AirPort Extreme time capsule . I need to extend my wifi network range. Which devise is better ?? Airport express or AirPort Extreme ??
Since you have the new Time Capsule, then you will need a new AirPort Extreme to match the performance capabilities of the Time Capsule.
If best quality is preferred, you will need to connect the Time Capsule and AirPort Extreme using a wired Ethernet connection between the devices. The advantage of doing it this way is that you can locate the AirPort Extreme exactly where it is needed...and there will be no loss of signal through the Ethernet cable.
A wireless connection will result in a significant drop in performance, but it might be OK for your uses, if you want to try it that way first to see if the performance is acceptable.
It is really important that the AirPort Extreme be located where it can receive a strong wireless signal from the Time Capsule.
A line-of-sight relationship between the Time Capsule and AirPort Extreme would be the goal, with the AirPort Extreme located about half way between the Time Capsule and the general area where you need more wireless signal coverage. -
When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?
Yes, home sharing requires both to be on the same wifi network. As it stands access to the network requires the login via webpage, which cannot be done on Apple TV. You will need to speak to IT in order to grant access for the device.
-
a tech company just set up a wifi network in my house and does not use my existing TC; how do I get it in the network to serve as backup for my iMac? (I don't need it as a wifi access point anymore) thanks
Just bridge the TC and plug it by ethernet into the main router.
Bridge in v5 airport utility.
In v6 it is under network.. change it from DHCP and NAT to Off bridge mode.
Turn off the wireless. -
I just bought "print n share pro" app and it dosen't seem to find our printer on our wifi network (a non-wireless HP printer attached to HP PC). What do I need to do to set this up?
I can only tell you that I had a couple of apps that worked perfect before but when ios 5.0.1, apple closed whatever way the apps used to print....Print Central was one....the developer. at least this one, said they could not do anything about it...they only recommended printing to PDF...
But I have a dedicated file server ( steream music and movies ) and I installed FINGERPRINT on my server and now I can print from my ipad, iphone to any printer on my server -
Problems with wifi networks, need a fix in new iOS 7 update.
Can Apple make a new feature for Wifi networks that has a button for disconnect from this network in new iOS 7 update? Because it irratering me when you want to disconnect from iPhone to iPad shared wifi network, you have to delete the network or it will be stuck for forever until you turn it off on iPhone. So long i know iPad is affected to this, but it can happen to iPhone too.
And one more thing, I want to have a device list that you can kick them out on only shared wifi network like iPhone to iPad.mads1153 wrote:
Because it irratering me when you want to disconnect from iPhone to iPad shared wifi network, you have to delete the network or it will be stuck for forever until you turn it off on iPhone.
Unless I'm missing something obvious, can't you just turn on Airplane mode? Or maybe just turn off Wi-Fi on the device if you need cell access to remain enabled? -
I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV. Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme). What is the correct way to connect these units? It seem self explanitory,but I'm checking my thinking. My HDTV is about 20' from where the airport router will be installed with a wall between them. Has anyone created this network? Is this the best way to create a WiFi network?
I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV. Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme). What is the correct way to connect these units? It seem self explanitory,but I'm checking my thinking. My HDTV is about 20' from where the airport router will be installed with a wall between them. Has anyone created this network? Is this the best way to create a WiFi network?
-
my iphone 4s can not scan any wifi network, i tried everything but still can not scan any wifi connection even though our wifi is working properly in our mac book and ipad. What do i need to do if the problem is the hardware?pls help
When you say it "can not scan any wifi network" do you mean it is not detecting Wi-Fi networks?
Is Wi-Fi turned on in Settings > General > Wi-Fi?
Have you tried Settings > General > Reset > Reset Network Settings?
Is it just the home network that the device will not connect to? or any network? -
Since upgrading to Lion OS 10.7.1, the wifi connectivity keeps blocking up intermittently and we need to manually keep switching on and off the wifi utility to get the connection back. even locking the preferred wifi network in system preferences does not help. This never used to happen with Snow Leopard
This is a big thank you to Rys Sinnefeldt who posted this fix.
Rys has made this fix very easy to do and takes literally 2 mins. It involves replacing the Atheros Lion driver 4.0 and replacing it with the snow leopard driver. Don't worry, Rys has made this so simple to do even I could do it and so far I have had no more wifi drops.
follow this link
http://rys.pixeltards.com/2011/09/04/osx-lion-wifi.html
Thanks again to Rys. -
my macbook pro 15inch running on maverick when i try to click on wi-fi says no hardware installed please help i need wifi and and under network staus wi-fi is fail and under network airport is not connected can anybody help the wifi icon has a x and does not even let me turn it on
Have you attempted to reset the SMC? That would be the first step. Hold the left control, option, shift key and the power button for about 5 seconds and release. Then try to reboot. Might as well reset the PRAM as well. Hold command, option, P, R on start up until the machine restarts. If that doesnt' have any affect we'll have to dig deeper into a potential hardware failure.
If this method doesn't work, check the webcam that will tell the problem is on the iSight & WiFi cable. If your webcam is ok, then it'll be the WiFi card problem. Hope it can help ;-)
- xia_us9 -
Wi-Fi: do I need to register every time I use WiFi network?
This is basic question but I'm not quite sure about using Edge network and WiFi network on my iPhone.
Mostly, I set
- WiFi "on"
- Ask to join networks "on"
So, always available WiFi networks come up when I use my iPhone. But I usually cancel to use it and just use iPhone on Edge network.(feel like internet is slow.)
Do I need to register or sign-up whenever I use Wi Fi network?
And if I see 'lock' sign with Wi Fi network, do I need to know their password? Do I need to join their WiFi network and they charge fee?
Thanks in advance for help!Do I need to register or sign-up whenever I use Wi Fi network?
Depends on the available Wi-Fi network. If at work or at the house of a friend or relative, there is no registration required but if the network is password protected, you must be given the password required to access the network.
And if I see 'lock' sign with Wi Fi network, do I need to know their password?
Yes - this means the network or password protected.
Do I need to join their WiFi network and they charge fee?
This depends on if the provider of the network requires payment for access. As an example, Starbucks uses T-Mobile for their Wi-Fi network available at each store but accessing it is not free and requires payment.
Some independent coffee shops, chain restaurants and businesses offer free Wi-Fi access for their customers and if not password protected, all you need to do is join the network - accept it and you will have access. -
I can't connect to wifi network and bluetooth on iPhone 4S. Need help. Have already rebooted everything and reset network setting
I have the same problem; tried a phone restore, both restoring data and setting up as new phone with factory settings, reset all settings, re-boot, remove apostrophe, put in fridge, you name it!
I think there's quite a few iphone 4s users with the same problem!
I called Apple they said it's a hardware problem, but it has worked for nearly two years; they say go to the Apple store and they can provide a replacement phone for approx. £150!
I've been into the O2 shop where I bought it and they knew the problem exactly; said they had sent a few phones off for repair and had them back awith a report they cannot fix it because it's a software problem!
An assistant in the shop had the same issues; logic says it's a software problem and hopefully Apple will fix it with a patch but at the moment they seem to be avoiding everyones comments!
If anyone else has any ideas these would be appreciated? -
I have a problem with my iPad 1 st. the problem is that I unable to locate even when connected to a WiFi network and the location is activated and restore and same thing happens .. may be I need help!
Thank you ...!Hi there beni_m,
You may find the troubleshooting steps in the articles below helpful.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
iOS: Device not recognized in iTunes for Mac OS X
http://support.apple.com/kb/ts1591
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
-Griff W.
Maybe you are looking for
-
Cannot read content from ipod...
my 30gb ipod was playing on my girlfriends laptop, then she brought the laptop into the kitchen to play and when i looked up, there was music or videos. But there was my photos on the ipod. My ipod is on manually manage and it says that my ipod has t
-
I am trying to load photos from my computer on to my ipad but keep getting the message "the device is no longer connected to the computer". It keeps popping up and I am stuck. This happened after I upgraded to the latest itunes software.
-
Creating an album page does not display all the albums?
I am trying to create a page that has an index with "poster frames" as reference of all the pages that I have with movies. I dragged and dropped all at once 10 video clips onto the album button but on the album page only 7 clips are visible. In my si
-
How to deal with Flex Exceptions ??
Hi , I know how to handle an Exception when dealing with Flex with server side that is , when an Exception comes from the server side (java) i can easily handle that on the fault event with the help of ErrorMessage . But can anybody please let me kno
-
Duplicate language for customer masterdata
Hi @ all, I need your support how to design a routine to duplicate the language key for customer master data in 2 languages 'DE' and 'EN' in the transformation. I know that I've to loop over the resultpackage and duplicate the language key, bt how to