Need wireless lan drivers for(Windows 7 64 bit) HP 15-d009tu Notebook PC

Thanks Sir for Your great Help... I have done it
if possible please also give the link to the following drivers
chipset
audio
vga
lan (Full)
USB driver
thanks again
Manoj Kumar Mohanta

Hi:
HP does not support consumer notebooks for 32 bit operating systems.
Try the W7 32 bit drivers and software from the HP Probook 450 G0, except the BIOS, firmware, audio and graphics drivers.
http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5359406&swLangOid=8&swEnvOid=4052
To install the graphics you need to:
1. Install the Intel chipset installation utility and reboot.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5359406&swItemId=ob_118468_1&swEnvOid=405...
2. Install the Intel HD graphics driver and reboot. First file listed is the auto install.
https://downloadcenter.intel.com/download/24346/Intel-HD-Graphics-Driver-for-Windows-7-8-8-1-32-bit
3. Install the nVidia graphics driver and reboot.
http://www.nvidia.com/download/driverResults.aspx/83081/en-us
Audio: Accept the agreement. Download and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...

Similar Messages

Graphics drivers for windows 7 compatible with hp notebook pc 500

iplz recommend me graphics drivers for windows 7 compatible with hp notebook pc 500

Hi:
Download and run this driver. You will probably get an unsupported operating system error.
http://h20565.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=447304&swItemId=ob_47264_1&swEnvOid=2096
Close out of any error windows.
Go to the device manager and click on the video controller needing drivers.
Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file.
That folder will be located in C:\SWSetup\sp34749.
Make sure the Include Subfolders box is checked and the driver should install.
Reboot and your graphics should be working normally.
You will not have Windows aero because the Intel GMA 900 graphics adapter is not 100% Vista or W7 capable but at least you will be able to change the screen resolution and have graphics acceleration enabled.

Need Palm Bluetooth Drivers For Windows 7 64 Bit

Hi,
I am a long time Palm Pilot user and I have been there through all the trials and tribulations. I have just bought a new computer running Windows 7 Home Premium 64-Bit edition and I am trying to find the drivers for Bluetooth sync.
I am using a Palm Tungsten E2 and the Palm OS 6.2 and with the computer I am currently using (Windows 7 Home Premuim 64-Bit) I sync via Bluetooth and never had any problems and want to keep it that way.
WyreNut and several members did a lot of work when Windows 7 first came out and helped a lot fo people with synch issues. I have searched the Forums and cannot find a link to where I can download the Bluetooth drivers so I can synch my Palm Pilot via Bluetooth to my new computer.
If someone could kindly point me to where I can get the Bluetooth drivers I will be grateful. Thanks so much.

CompDave1 wrote:
I am a long time Palm Pilot user and I have been there through all the trials and tribulations. I have just bought a new computer running Windows 7 Home Premium 64-Bit edition and I am trying to find the drivers for Bluetooth sync.
I am using a Palm Tungsten E2 and the Palm OS 6.2 and with the computer I am currently using (Windows 7 Home Premuim 64-Bit) I sync via Bluetooth and never had any problems and want to keep it that way
WyreNut and several members did a lot of work when Windows 7 first came out and helped a lot fo people with synch issues. I have searched the Forums and cannot find a link to where I can download the Bluetooth drivers so I can synch my Palm Pilot via Bluetooth to my new computer.
If someone could kindly point me to where I can get the Bluetooth drivers I will be grateful. Thanks so much.
Hi, please clarify as it sounds like both your old and new computers are the same OS.
As you know, the E2 has Bluetooth built-in. There are no Bluetooth drivers to download.
smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

HP ENVY 17-j021nr Notebook PC Need Display adapter drivers for Windows 10

I upgraded to Windows 10 64 bit. After the install my side monitor did not come on. I thought I would have to manually update the drivers. After going to the hp support site: http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-17-Notebook-PC-series/5354973/model/5395122?sku=E0K86UA&ssfFlag=true#Z7_3054ICK0KGTE30AQO5O3KA30R1 I do not see any "video drivers" for my laptop. I also went to the Nvidia site, Downloaded and installed the drivers for the Nvidia Geforce GT 740m but that did not work. I did the "clean intall" option. I Called HP support. They said that i needed a higher level of support and transfered me to a different department. This unknown to me named department states that there is a fix for this. That I would have to pay for at least 1 day of support so they could remote into my system and correct the issue. I said how much? They said $100 I simple need drivers that will work for my video card so that I can start using the HDMI output on my laptop. I need the Nvida card to operate at peak performance at some point but for now I am simply asking for compatible display adapter dri vers.

I am having the same problem withmy display adaptors after updating to windows 10. I can't find any fix online. I think HP has not yet built an update for my driver. If anyone can help, please HELP!!! my driver is an AMD Radeon HD 8400 R3 Series.

I Need USB Controller Drivers For My HP Pavillion g6 2235ca Notebook Running Windows 7 Pro 64bit?

So it has been at least a couple of months that I've been using my laptop with only ONE working USB port.
The other two do NOT work. If I go to Computer on the Start menu, and right-click on Computer, then Manage, then i go to Device Manager, there is a yellow exclamation mark next to Universal Serial Bus (USB) Controller.
When I try to update them, Windows 7 tells me that an update could not be found blah blah blah...
This problem happened ever since I installed Windows 7 64bit over Windows 8 64bit.
So, can someone help me find drivers for this USB Controller? Or is this some kind of hardware failure or issue?
Please help? Anyone...!
Thank you!
This question was solved.
View Solution.

Hi,
Try installing the USB 3.0 driver on the following link.
http://ftp.hp.com/pub/softpaq/sp55501-56000/sp55975.exe
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Need Wireless lan card for L100-179

Hi guys can any one advise me where to buy a wireless lan card and any advise and installing one please

Hello
In my opinion the first step is your local dealer where you have bought the unit. This unit is not known to me but I presume unit is WLAN ready and upgrade with mini PCI WLAN card is possible.
Other way to find out which WLAN card is compatible with your unit is to contact service partner in your country.

Need Drivers for windows 10 x64

Hello, I need the proper drivers for windows 10 x64 for my probook 450 g1 laptop. I got the drivers from this page: http://us-support.external.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4192all the drivers are not present here like display, hot keys etc. So it will be very helpful to me if someone helps me to get those drivers. Thanks in advance.

From Boot Camp: System requirements for Microsoft Windows operating systems - Apple Support please use Boot Camp Support Software 5.1.5640.
You can use Boot Camp: Install or repair Boot Camp drivers for Repair.

Cisco Wireless Control System need wireless Lan Controller ?

Cisco Wireless Control System need wireless Lan Controller , for Rogue detection

Hi Joao,
The WCS is used in conjuntion with the WLC (Wireless Lan Controller) for Rogue Detection. It is not a must for this function but more of an add-on :)
The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco wireless LAN controllers and the Cisco Wireless Location Appliance.
From this doc;
http://www.cisco.com/en/US/products/ps6305/index.html
Overview of WCS
The Cisco Wireless Control System (WCS) is a Cisco Unified Wireless Network Solution management tool that adds to the capabilities of the web user interface and command line interface (CLI), moving from individual controllers to a network of controllers. WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
WCS runs on Windows 2003 and Red Hat Enterprise Linux ES 4.0 and AS 4.0 servers. On both Windows and Linux, WCS can run as a normal application or as a service, which runs continuously and resumes running after a reboot.
The WCS user interface enables operators to control all permitted Cisco Unified Wireless Network Solution configuration, monitoring, and control functions through Internet Explorer 6.0 or later. Operator permissions are defined by the administrator using the WCS user interface Administration menu, which enables the administrator to manage user accounts and schedule periodic maintenance tasks.
WCS simplifies controller configuration and monitoring while reducing data entry errors with the Cisco Unified Wireless Network Controller autodiscovery algorithm. WCS uses the industry-standard SNMP protocol to communicate with the controllers.
From this good doc;
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html#wp1131195
Detect and Locate Rogue Access Points
From this WCS doc;
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806f070a.shtml#new5
Rogue Detection under Unified Wireless Networks
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
Hope this helps!
Rob

I need all the drivers for Hp15 r007tx windows 7 32 bit

Dear Team,
I have purchased hp 15 r007tx and need all the drivers for it. I have installed windows 7 32 bit on it.Plz give me the link.
This question was solved.
View Solution.

The above images are the sample of error message that i get once i update windows 7 or i reboot after installing a driver. The images are only sample not the actual error messages.

Drivers for Windows Vista 64-bit on Satellite L300-1AM

When I can get drivers for Windows Vista 64-bit? Or I need to intall 32-bit drivers on my 64-bit Vista operating system?
Please links ;)

[Toshiba - Download Drivers|http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]
In the Drivers Search Page (the link above) select these filters:
_Product type:_ +Notebook+
_Family:_ +Satellite+
_Product Series:_ +Satellite A Series+ (don't try the L series if you want to find anything useful)
_Operating System:_ +Windows Vista 64 Bit+
_Country:_ +World Wide+ (you have to select this in order to get rid of those multiple country options available for the modem)
_Language:_ +English+ (obviously)
Don't modify any other filter. The results will be about 100 (maybe more, but the site is set to show up to 100 results).
Advices:
1. Download the latest versions only (there's no point in downloading multiple versions of the same driver, yet they will be shown in the search results area)
2. Download what's specific to your laptop only (network - RealTek, both wired and wireless; chipset and graphics - Intel; modem - Toshiba; webcam - Chicony; there's no point in downloading anything from otehr vendors - except maybe the touchpad, but Windows can handle it properly without aditional drivers)
3. Don't download any BIOS or Firmware file; they might not be for your notebook, and installing the wrong ones is a sure path to screwing up your notebook (and losing the warranty); if you need them upgraded, go to the download page for your specific model, Windows XP or Windows Vista 32 Bit drivers (since they are OS independent anyway)
Toshiba utilities (DVD Player, ConfigFree, etc.) should be OK too (again, download the latest version only).
BTW, I own 2 Toshiba notebooks (L300-1AM and L300-1AN; quite similar, the differences are in HDD and CPU only) and I had the same problem: no 64-bit drivers (and the same "support"). Quite strange the idea that Toshiba is testing these 64-bit drivers before releasing them (according to a previous post), since the same drivers, for the very same chipsets - but installed on other models - are available. Windows Vista 64-bit is out on the market for nearly 2 years now, the production of these models has already been stopped (and I assume they have not been produced during one night only :) ), yet they had no time to test the drivers... High-class support from Toshiba!

U330 wireless and bluetooth drivers for windows xp. devices not working. drivers already installed

so i did a fresh instal of windows xp pro sp3.
device manager shows yellow question mark and ! for Network Controller and BCM2046 Bluetooth Device. i have tried using lan to windows update, update drivers, but device manager cannot find anything.
i have installed the 2 broadcom drivers for windows xp listed on lenovos website. i made sure that wireless switch is on, and fn+f5 wireless option is set to on as well.
LAN shows up. and so does the 1394 on the network connections, but no wireless.
(note: on my server 2008 os, the new windows troubleshooting instructed me to turn on a specific service, which then enabled my wireless to work.)
however i cant seem to find a way to get the wireless to work.
Could someone tell me all services exactly need to be enabled for the wireless to work? and why does the network controller still show up on device manager even after i have installed the drivers?
please help, totally lost.

Your "yellow" device is Bluetooth, not WiFi.
Fn+F5 utility work depends on both of them, so you need all drivers to be installed before it will work.
Install bluetooth drivers for your model. Also, your WiFI also may be Broadcom (Gemtek) and you may be trying to install Intel WiFi.
//help will save the world

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

I have i mac system, need all drivers for windows?

I have I Mac system and i installed windows vista ultimate edition, i require all drivers for windows vista

It is installed (I installed Windows....)
Everything you need to know was in Boot Camp Assistant, the drivers are on OS X DVD (while in Windows)
HERE:
http://www.apple.com/support/bootcamp has FAQ How To Manual articles and updates for AFTER yu have Boot Camp 3.0 installed
If you bother to read the instructions first would save you and us a lot of repeating.
You also want Microsoft Security Essentials Vista SP2+ (Windows 7 64-bit would be better and supported) and make sure you have about 15-20GB free space on Windows. All the updates will eat up 10GB of temp space, plus page and other items

Simple Question: My Core2Duo MacBook cannot use DRIVERS for 64-bit Windows?

What I thought was a Windows 7-only problem, I think I may have realized that I simply cannot use the drivers for 64-bit Windows anyway. I may need to reinstall Windows 7 using the 32-bit disc instead if I want to use all the features of my MacBook.
The thing is, my MacBook is perfectly capable of running 64-bit software, is this not correct? It's only a matter of paying more if I want everything to work? At least I'll run 64-bit Snow Leopard, I'm sure that will work at least!
Message was edited by: LiQuiD_FuSioN

Are you getting an error saying that Boot Camp x64 isn't supported on your system? If so, try this:
Go here: http://www.sevenforums.com/tutorials/507-built-administrator-account-enable-disa ble.html Follow the instructions in option two, its the easiest way. You'll need an external mouse for right clicking.
Once you've enabled that, log out of your account in Windows 7/Vista, log in to the newly appeared "Administrator" account, put in the appropriate disc with the Boot Camp drivers on it, browse the files on the disc. Go into Drivers, then Apple, then right click and run "BootCamp64"as an administrator. Everything installs just fine.
Then follow the instructions on that page I linked to remove the administrator account.
I have Windows 7 Home Premium x64 installed on my original aluminum unibody MacBook. It runs without a problem. I've even installed newer nvidia GPU (not chipset) drivers. Both to get better performance in the games I do play and because the drivers that ship with Boot Camp 3 are ancient.
Everything works! Should work on any non-ATI x1x00 series Core 2 Duo Mac, since ATI/AMD will not be supporting Windows 7 on those GPUs.
I posted it originally in this thread: http://discussions.apple.com/thread.jspa?threadID=2211248&tstart=15

HP PSC 1400 Drivers for windows 7 Professional X64 (bit) problem

I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!

Suhail wrote:
I have downloaded full printer software and drivers for Windows 7 Professional 64-bit from HP site- but nothing so far has worked I have tried several times, neither i can locate any driver that will work for it, even after attempting to install from the HP program listed for my OS and this printer.Every time at the end of installation it installation stuck at a message configuring printer and it keep saying that for hours and do not finish. Finally I had to terminate the process manually to get out of it! Please Please Please help!Which PSC 1400 are you using? There a few different models: HP PSC 1402 All-in-One PrinterHP PSC 1410v All-in-One PrinterHP PSC 1410xi All-in-One PrinterHP PSC 1417 All-in-One PrinterLet me know which one so I can get you the proper download.Thanks,Sean

Need wireless lan drivers for(Windows 7 64 bit) HP 15-d009tu Notebook PC

Similar Messages

Maybe you are looking for