Need work around! import camera photos, come in huge and low res

since i need good photos for my fce projects and to have only one camera instead of two...i bought a New panisonic 3ccd camcorder, takes video and can take good 1760 x 1320 pics (2.3 mega pixel)...but when i import to iphoto, it comes in as a 24' w by 18' h and at a crummy 72 dpi. called panasonic and they were as mac friendly as bill gates.
they had no suggestions.. reading discussions i tried image capture, no change. i want a 5 x 7 picture with all its detail. it must be a software problem..where to go what to do !!!!!
help!!!!!!

tom, thanks great article..but i'm not concerned about print media..so 2 questions..
1.. are you saying my 1760 x 1320 pixel pic should be fine in fce cause it will scale it down to correct size and look good??
2. if your answer is yes.. then iphoto must be more dpi sensitive than pixel numbers... pics look real fuzzy in iphoto cause it 24'x18' at 72 dpi...if photo size was 5x7 then dpi would go up and look fine in iphoto. but i dont know how..you know that you can enlarge a hi mega pixel pic to a point and still look good BUT. you cant resample in photoshop a large 72 dpi pic to smaller and higher dpi and expect it to look good..??? is so how ???

Similar Messages

My iphone 4s suddenly displays images from Yahoo, Google, and Flickr at low resolution. The camera on my phone works fine, but any web related photo content is now pixelated and low res, what's the deal?

My iphone 4s suddenly displays images from Yahoo, Google, and Flickr at a low resolution. I have IOS 7.0.4. My phone camera works fine, but any web based photo content from Safari, Yahoo images, Google images, and Flickr all come in pixelated and low res. What's the deal?

It happened to me but later I figured out that cellular signal was not that great and so the Internet was very slow. It took me about 2 minutes to get the full resolution picuture on either of the app you've described. Try to get faster internet either by wifi or good signal and then check.

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens. I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

I just imported 70 photos successfully, edited them, and then attempted to upload them to a Facebook album. It did not work and got hung up, so I force quit IPhoto and was going to try again. The 70 photos have DISAPPEARED!! Help !!!!

I just imported 70 photos successfully, edited them, and then attempted to upload them to a Facebook album. It did not work and got hung up, so I force quit IPhoto and was going to try again. The 70 photos have DISAPPEARED!! Help !!!!

What version of iPhoto? Assuming 09 or later...
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I tried to import some photos into iPhoto today and was given a messaged indicating I'm out of room?! I only have 11,800 pics in my library and have been told iPhoto can hold up to 250,000. Help!

I tried to import some photos into iPhoto today and was given a messaged indicating I'm out of room?! I only have 11,800 pics in my library and have been told iPhoto can hold up to 250,000. Help!

Command (right) - click on your hard drive icon on the Desktop and select Get Info from the contestual menu:
In the window that comes up will be the amount of available(free) space:
OT

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is

It's simple... I want the Illustrator pen tool to ALWAYS make corner annchor points and NEVER smooth. Right now I have to convert every single one of them, or I have to do a work around every time I draw a line and make one of the handles disappear. Is there some simple setting out there that will just "make it so?"@

The video I am watching this guy is just dragging every line to make curves. And every anchor point is a corner. He is not switching back and forth between the pen and the anchor points tool, and he is not using the convert points tool. He draws a curved line and starts another straight line only to curve it with a click and a drag. It is super efficient, and I could save a world of time if I could figure out what he is doing.

There was an error importing some photos from my iphone, and since then I can not close the program ... it gives the mesage 'please wait until import is conclued'...but nothing is being tranfered. Any help ? Iphoto version 9.5.1

there was an error importing some photos from my iphone, and since then I can not close the program ... it gives the mesage 'please wait until import is conclued'...but nothing is being tranfered. Any help ? Iphoto version 9.5.1

Force Quit the application from the Apple menu.

I burned photos to a cd and it included all the faces and low res duplicates

I burned photos to a cd from iphoto and it included the ind. faces and low res. images that iphoto created - I only want the originals.

The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
Try these in order - from best option on down...
1. Do you have an up-to-date back up? If so, try copy the library6.iphoto file from the back up to the iPhoto Library (Right Click -> Show Package Contents) allowing it to overwrite the damaged file.
2. Download <a href="http://www.fatcatsoftware.com/iplm/"><b><u>iPhoto Library Manager</b></u></a> and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
3. If neither of these work then you'll need to create and populate a new library.
To create and populate a new *iPhoto 08* library:
Note this will give you a working library with the same Events and pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
In the future, in addition to your usual back up routine, you might like to make a copy of the library6.iPhoto file whenever you have made changes to the library as protection against database corruption.

Camera photos come up blank

i believe ever since i upgraded to the latest january software upgrade, when i take photos all seems well--the shutter goes off, etc. but then when i go to look at my photos, all i see is an empty frame for each photo. then when i click on one of them, the screen goes blank (black) and then goes back to the home screen. then if i go to the photo roll, its totally blank, as if i never took any photos.
help!

ITS FIXED!
thanks to the posting on this page:
http://discussions.apple.com/message.jspa?messageID=6313773
which i will repost here. if you use windows and your camera aint working, try this, it totally worked for me. yeah!
jkeegan
Posts: 2
Registered: Jul 5, 2007
Re: Camera will not save pictures to phone after snapping photo
Posted: Dec 4, 2007 12:30 AM in response to: resourcesforlif...
Click to reply to this topic Reply email Email
I have a third option..
I saw this message, and cringed at option #2 (which is simply to erase all settings and content after syncing).. I didn't want to lose contact photos, calendar events, sms messages, notes, safari bookmarks, etc, etc.
So, I went in and found (on my windows laptop) where iTunes was storing the backup files:
C:\Documents and Settings\jkeegan\Application Data\Apple Computer\MobileSync\Backup
That dir had two directories beneath it, with long hash filenames..
One seemed to be for an earlier version of the software, and the other for the latter. I synced my iPhone with iTunes, and saw the newer of those two directories get updated slightly, so it seems they're storing one backup per version.
I copied the directory (maintaining file permissions and dates etc) into another directory off t the side, to use as a backup if I had to.
Then I went into that newer backup dir and just started looking through these files for anything that looked like it had to do with photos..
One file, which for me was named f1b43d3b3ecf259a3626c13a8b0cebd8ba513117.mdbackup, seemed to talk about image numbers for photos.. The broken version of this file looked roughly like:
============
bplist00<D4>^A^B^C^D^E^F^TPathWVersionTDataXGreylist_^PESCMedia/DCIM/.MISC/Info. plistS1.0O^Q^A><?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>LastFileGroupNumber-100</key>
<integer>1024</integer>
<key>LastFileGroupNumber-101</key>
<integer>170</integer>
</dict>
</plist>
^^@^Q^@^V^@^^^@#^@,^@J^@N^A<90>^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@ ^@^@^@^@^@^@^@^@^@^@^@^@^@^@^A<91>
============
So, I disconnected my iPhone from the dock, and then tried deleting that file from the actual Backup directory that iTunes looks at.. I reset the iPhone according to option #2 (Settings->General->Reset->Erase All Content and Settings).
When I connected it to the dock, it asked which backup I wanted to use, and I said the most recent. It updated everything, and now the camera works (I had no photos on the phone - the initial problem coincided with me deleting all photos on the iPhone after extracting them). I didn't lose any contact photo images, sms messages, etc - nothing.
To find that file for you, you can try doing a "grep Info.plist *" in the backup directory with the most recent modification time after doing a sync to back up. (I'd make a backup of the entire Backup directory before trying what I did).
I hope Apple fixes this, along with the other documented camera problems.. but at least here's a workaround that doesn't result in you losing everything.

Is there a work around to use two Apple IDs across and iPhone and a MB Pro?

iPhone 5 and Macbook Pro Retina late 2013. iOS 8.1 and Yosemite.
It's a company iPhone and a personal MBP. Phone has an Apple ID associated with company credit card and MBP personal Apple ID with personal credit card.
There is a cross platform issue as you cannot use two Apple IDs in Facetime and Messages. Therefore my iPhone and MBP do not interoperate correctly, for example, a text message in messages on the iPhone will not appear in Messages on the MBP. Similar situation for FaceTime. When you try to enter the second email associated with the second Apple ID on either platform you get "cannot verify because email is already in use".
Any work arounds?
This is something Apple should have really anticipated as iPhones become more widespread in corporate use.

Thank you for your continued interest and research on my behalf on this situation. I was on the phone with Apple support (at no charge) for over an hour yesterday. Becasue I have what they cal a "vintage computer"(7 1/2 years old), there are some additional issues. We thought it was solved at teh end of the phone call but aparently it was not. I am going to call them now and see what else can be done. I will keep you posted.
Thanks again.

Import of photos from iPad frozen and cannot close i photo or disconnect iPad

import of photos from i-pad to i-mac has stalled midstream. Cannot close i-photos or disconnect pad from mac. How do I proceed please?

Thank you Nick. I did a version of that by closing the pad, unplugging then force quit i photos. I am very new to i Mac but learning fast. The Mac opened in I photos when I plugged in the pad, not I tunes as normal. As soon as opened I tunes then plugged in the pad, it all fell into place.

Need work around for image gallery with password protected URLs

Is there a way to display an image gallery that has password protected URLs?
I can build the image gallery in Siena using an excel table with a list of the images and when I preview the app inside Siena I get the expected credentials prompt from IE, and I enter the credentials and the images load and display with their captions perfectly.
There are 4-6 images in the gallery.
When I publish and produce a store app, the app errors out with can’t connect and obviously fails on
var GenericInitError = "The app could not connect to the server. Please try again later.",
GenericInitTitle = "Network error";
Most likely because Siena wants to preload everything and there is no way with preload to enter credentials.
I am looking for any alternatives that would let me get around this.
TIA
-- Barb Bowman

On Mon, 24 Mar 2014 05:10:01 +0000, Radu Gruian (MSFT) wrote:
>One possible thing to do would be download and embed the images into your app, eliminating the need for password-based authentication.
Nope. The app accesses a group of IP Security cameras. Static images would not
make any sense. And authentication is required. Not negotiable.
-- Barb Bowman

Cannot import camera photos from iPhone

I have taken a few photos with the iPhone camera. When I connect it to my MacBook and launch iPhoto, it goes into import mode, but only shows three white rectangles where the photos should be. After "Import All", iPhoto says:
*Unreadable files: 3 -- the following files could not be imported (they may be an unrecognized file type or the files may not contain valid data).*
Even when I go to the iPhone and delete all camera roll photos, the above error still shows up. Image Capture also fails to import and/or delete these "unreadable files". New pictures show up on the iPhone camera roll, but not on iPhoto or Image Capture -- I always get these three files.
As a consequence, I can no longer download any picture I took with the iPhone. Any suggestions?

Since photos captured by your iPhone are included with your iPhone's backup, I suggest restoring your iPhone as a new iPhone or not from your iPhone's backup.
This will lose your iPhone settings, but I know of no other way to resolve this problem.

On-Premise SharePoint and Exchange Online -need work around to use My Mail web part.

Due the fact that the My Mail or My Calendar web parts use iFrames they will not display correctly on the page. I get a message "This content cannot be displayed in a frame" and then the option to open this content in a new window.
The issue is the iframe and the Browser security to prevent Click-jacking.
What I've tried - http Response Headers X-Frame-Options -value= Allow-from
https://outlook.com/owa
Plus various IE settings.
Page-viewer web part - same issue.
I would really like to use these web parts on my SharePoint site. Any suggestions?
Thank you,
DLDevine

Hi,
According to your post, my understanding is that you got the "This content cannot be displayed in a frame" error.
You can add the site in trust site to check whether it works.
Open Internet Explorer (the desktop version if you are using Windows 8)
Press Alt + T on your keyboard to show the Tools menu
Click Internet Options
Click the Security tab
Select the Trusted sites zone
Click the Sites button
Type https://login.microsoftonline.com or other site URL into the Add this website to the zone:field
Click Add
Click Close
Click Apply
Click OK
Close Internet Explorer
You can also check the below link, just download the zip and deploy the wsp(Its a web application level feature) and select your web application and activate the feature, in which you want to open the site in an IFrame.
http://ventigrate.codeplex.com/releases/view/79825
There are two similar threads for your reference.
http://social.msdn.microsoft.com/Forums/vstudio/en-US/2f95e434-7b30-4401-925e-0739b6227082/ie-8-frame-issue-this-content-cannot-be-displayed-in-a-frame?forum=netfxjscript
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/69801bab-58d6-45ce-960b-2c3c45a7e2e2/view-sharepoint-2010-pages-in-iframe?forum=sharepointdevelopmentprevious
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

Need work around for "install_flash_player_10_active_x.msi failure.

The Quickbooks Premier 2011 install package fails on a Windows 7 64-bit computer.
When QB stopped supporting this package last May, my QB suddenly failed and I was unable to reinstall it. The QB Tech worked several hours without success.
The issue is that in directory C:\Users\...\flash10\install_flash_10_active_x.msi fails when the installer tries to execute it.
The installation fails because I have (or had) a later version of the flash player installed.
Even when I uninstall the later version flash player, install_flash_10_active_x.msi fails when I double click it.
I even used regedit.exe to remove the left over registry keys (10, 11, 12, 13, 14, and 15) from
HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\FlashPlayer\SafeVersions
I was using Explorer 11 with FlashPlayer 15. I need QB to complete my taxes before the IRS gets me. Please, I am open to suggestions.
What I think might work is getting an ".msi" file that will work with the Explorer 11 that I can rename to trick the QB installer in to getting past this problem.
Any thoughts that might help be get past the point?
Thanks sincerely,
Ed Eibling

This problem is now resolved, thanks to the kind assistance of Klaus Hartnegg [mailto:[email protected]]
searched my computer for *.msi and found "install_flash_player_15_active_x.msi",
Moved it to the directory with "install_flash_player_10_active_x.msi". deleted the 10, renamed 15 to 10 (to fool the QB installer),
deleted HKEY_LOCAL_MACHINE\SOFTWARE\Macromedia\FlashPlayer\SafeVersions from the registry.
The Quick Books Premier 2011 installed normally.

Need work around! import camera photos, come in huge and low res

Similar Messages

Maybe you are looking for