Need WXP install order for Portege R830-10Q

DOES ANYONE HAVE THE INSTALL ORDER OF DRIVERS / SOFTWARE FOR WINDOWS XP FOR TOSHIBA PORTEGE R830-10Q PLEASE?

Hello
I have install order for R700 but for your R830 must be similar.
Order must be as follow:
Windows XP SP3
Synaptics Touch Pad Driver
PatchFiles
USB3.0 Driver
USB-Serial Driver
TOSHIBA Assist
TOSHIBA Security Assist
Trusted Platform Module
TPM Driver
Intel Chipset SW Installation Utility
Intel Management Engine Interface
Intel AMT Software
Intel Display Driver
Realtek Audio Driver
Intel LAN Driver
Ricoh Card Reader
Intel Wireless LAN Driver
TOSHIBA Common Module
TOSHIBA Web Camera Application
Authentec Fingerprint Driver
PatchFiles2 DisableFingerprintSelectiveSuspend
Finger_print_restart
TOSHIBA Smooth View
TOSHIBA PC Diagnostic Tool
TOSHIBA Controls
TouchPad On_Off Utility
Bluetooth Stack for Windows by Toshiba
ConfigFree
TOSHIBA Mobile Extension
TOSHIBA Password Utility
TOSHIBA Utilities
TOSHIBA HDD Protection
TOSHIBA HDD_SSD Alert
TOSHIBA Hotkey Utility for Display Devices
TOSHIBA Display Device Change Utility
TPSReg REG
TOSHIBA Power Saver
Wireless Hotkey
TOSHIBA PC Health Monitor
TOSHIBA Sleep Utility
TOSHIBA Service Station
PatchFiles3
TOSHIBA Network Device ID Registry Setting Tool
PatchFiles4 PatchFiles
I hope this will help you.

Similar Messages

  • Need Vista install order for Satellite A300-1HV

    Hello, could anyone give me or point me to the Vista installation order for a A300-1HV (drivers and utils)
    Many thanks.

    I installed all drivers and apps as above, using latest versions for my particular hardware.
    Regarding the Robson Drivers for the Intel AHCI - Advanced Host Controller Interface for the SATA disk:
    With AHCI turned on in the BIOS I needed to extract Robson Package v1.5.0.1013 onto a USB key (the only version I could extract from exe), then use this when partitioning at the start of Vista install by clicking 'Load Driver' and browsing to the USB key and then the Driver folder.
    NOTE: If you don't do this and AHCI is switched on in the BIOS then the installation will hang at the 'Completing Installation' stage.
    Once Vista is installed and SP1 installed, when you install the Robson driver again from the list above you can use the latest version.
    The latest TVAP v1.1.9 did not install and came up with a 'GetProfString is Failed' error, so I installed v1.1.4 ok.
    Only one issue was the media buttons did not seem to work correctly. The following link fixed the left most 'dimmer' button and the 'media player' button. The rest, control buttons then worked as expected.
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=127192&#127192
    I installed Vista Home Premium first and then I had Vista SP1 on disk which I installed. Then rebooted after every driver and application install to make it clean as possible.
    The entire process was done without internet connection, wireless was switched on but I never connected to my LAN. All drivers and apps were loaded from a USB key following Vista SP1 installation.
    Next stage was to install AntiVirus and then connect to Internet and allow Vista to install all required updates.
    There are 3 drivers that Microsoft is offering me. The first time I tried this installation I installed these and I started to get warning messages upon my WLAN connecting, but these disappeared when I disabled my LAN device.
    I AM NOT INSTALLING THESE, I shall wait for updates from Toshiba. - If it ain't broke, don't fix it.
    All functionality appears to work correctly.
    (p.s. My Vista gets a 4.0 average in the Windows Experience Index. I can't remember the exact results but obviously 4.0 was the lowest and there were a few 5.x's in there)
    Hope this may help someone.

  • ...desperating trying to install itunes 10.7, but it asked me to install Mac OS X 10.6.8.  I did, but then it said that I needed to install Java for Mac OS x 10.6.  I did that and now it keeps saying 'this update requires Mac OS X version 10.6??

    ....desperating trying to install itunes 10.7, but it asked me to install Mac OS X 10.6.8.  I did, but then it said that I needed to install Java for Mac OS x 10.6.  I did that and now it keeps saying 'this update requires Mac OS X version 10.6??

    Upgrading to Snow Leopard
    You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
    After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
         Snow Leopard General Requirements
           1. Mac computer with an Intel processor
           2. 1GB of memory
           3. 5GB of available disk space
           4. DVD drive for installation
           5. Some features require a compatible Internet service provider;
               fees may apply.
           6. Some features require Apple’s MobileMe service; fees and
               terms apply.
    Actually, you cannot download Snow Leopard. You downloaded a Snow Leopard updater.

  • Need to install Iphoto for 10.8.5.

    I need to install Iphoto for 10.8.5. Where can I download it?  I'm willing to pay for it. I just don't know where to get it.  Apple only has the version that works with Mavericks and I have had a bad experience with Mavericks and don't want to go near it.  Thanks.

    If the computer shipped with Mac OS X 10.6.8 or earlier, not including Mac OS X Server, install it from the computer's original disks.
    If the computer shipped with Mac OS X 10.7 or newer, go to the Mac App Store main page, click on Support under Quick Links, contact Apple, and see what they say.
    If desired, buy an iLife 11 DVD from a source such as Amazon or eBay.
    (103048)

  • What is new in BIOS v3.0 for Portege R830, R840 and R850 series

    Hi
    Toshiba released updated BIOS version 3.00-WIn on the 11/08/2011.
    Has anybody installed this and/or know what it covers?
    I hesitate to install without knowing what may be altered.
    Many thanks for any comments.

    Hi
    As far as I know Toshiba European driver page does not provide details what has been changed in the new BIOS versions. But I found the Toshiba US driver page and there you can find all the details about the BIOS changes.
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp
    [ACPI Flash BIOS version 3.00 for Portege/Tecra/Satellite R830/R840/R850(v3.00; 08-11-2011)|http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=3125063&pf=true]
    - Improved thermal control.
    - Improved Hot Undock control in Windows XP.
    - Improved a power-off issue.
    - Improved an issue where the screen may flicker until the OS starts while resuming from hibernation on external GPU models.
    - Improved stability when resuming from hibernation on external GPU models.

  • Win XP Pro drivers and install order for Qosmio E10

    Hello,
    I bought recently Qosmio E10 in Korea. The OS is Korean Win XP Home. I would like to change it, so I guess I have two options:
    1. Get a restore CD in English. But I read that Toshiba has the strange rule not to give restore CD with different language. I wrote them, they don't answer for now.
    2. Install Win XP Pro myself (I have only this license). The issue in this case is to be able to get all the drivers I need. I found good drivers on several locations:
    On http://www.toshiba.co.kr, but I worry that these drivers are for Korean XP.
    The other place is http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
    In this place, most of the drivers are for Media Center edition. There are drivers for XP Pro, but they are not so many and there is no install order. For example, there is no NVidia driver, while such driver is available for the media center. Maybe I can use Media center drivers on XP Pro?
    So my question is: What drivers I have to use and and what order to get a proper working XP Pro. It would be nice to know where to download QosmioUI. I found the Linux player and I will install it, but I want also to have the player in Windows.

    Hello
    As far as I know the software is bundled on notebook and if you buy a notebook you buy automatically OS and license to use it. That means that you can not order a recovery DVD on another language. Qosmio E10 is delivered with Windows MCE2004 SP1a.
    The only possibility is to install Microsoft Windows XP OS (full version, with or without MCE), and then you must install all necessary drivers, tools and utilities separately.
    For English language you can find them on http://eu.computers.toshiba-europe.com under Support & Downloads.
    Bye

  • Install order for GC 10.2.0.3.0

    Hi,
    I read install notes for GC 10.2.0.3.0 and I am confused. Did I understand this order correctly (I have an existing DB 10.2.0.3 on AIX 5.3, but no GC-repo ):
    - numbering as of release note:
    2.1 install GC 10.2.0.1.0 into new DB
    2.2 aplly patch 4329444
    2.3 Install Oracle Enterprise Manager 10g Release 3
    2.4 skipped, I don't have a repository so far in my original DB and don't need to upgrade the new created Repository.
    3. upgrade GC 10.2.0.X.0 to 10.2.0.3.0
    3.3 = 2.3 do I have to install it again ?
    4. what is the differrence to step 3. ? Looks like I don't need that ?
    When do I install the repository into my original DB ? after all the steps as above ?
    I guess, after all I can drop the instance created in step 2.1 ?
    thanks for sorting out the correct order, LaoDe

    Into new Database means your GC repository will be installed into a new Oracle database that will be created alongside the install. So you will have a second instance different from your existing 10.2.0.3 instance. With this option, you do not have to create a database. The installation will do it with the parameters you give it(e.g name)
    Into existing Database means you specify that GC repository is installed into your 10.2.0.3 instance without creating a new database. In this case you must have created a database to give the installer as a parameter during install.

  • AC adapter for Portege R830

    Hi there
    I own a Toshiba Portege R830 (P/N PT321U-04S019B).
    It's original AC adapter was lost a long time ago so I brought chinese analogue, that turned out to be no good.
    Now I want to buy original one. But I can not find out its model. I only remember that it's output was 75W.
    Another point is that I've changed my laptop's battery to 9-cell. Do I need more powerful AC adapter now?
    Would you please tell me what do I need to buy and is there some place where I can buy original parts from Toshiba?
    Thank you!

    Even if you replaced the battery with a stronger one, you dont need another, stronger AC adaptor.
    The battery charging procedure will take longer but I guess this should not be a big issue for you
    As mentioned by Dr.Lamp; the new AC adaptor should support the 19V and 3.42A
    The Volt value is very important and you need exactly the Adaptor which meets this 19V requirement. The Ampere (A) value can be little bit different but should not be too low.

  • Need mobile CD-ROM for Portege 3110ct

    I need a Mobile CD-rom - Portege 3110ct, with pcmcia cable. Can anybody help me?
    Johnny

    Hi Johny
    I have one for you but you must pick it up. I live on NEW ZEALAND and you must pick it up personally. I am kidding!!! ;)
    Jony Google a little bit around and you will find a lot of notebook parts offereors where you can order one. Check also eBay if you want to buy a used one.
    http://www.laptopbits.co.uk/Database_files/PX1052-1816.asp

  • Satellite U400: Need Vista install order and Control buttons don't work

    I bought an Satellite U400-11T model with french windows Vista.
    I want to change the french Vista to hungarian Vista.
    Of course I bought a legal vista HUN and downloaded the drivers etc.
    I am interrested in about the install order called installation instruction like at the XP models.
    My second problem is; I have already installed the new Vista HUN and the 6 easy key touch buttons don't work anymore.
    Where can I switch on it or wich program must i reinstall?
    Thanks
    Schmid

    Hi
    The installations order for Satellite U400 should be as follow:
    Windows Vista SP1
    Intel(R) Chipset Module
    Intel(R) Robson(Intel iMSM Driver)
    Intel(R) Crestline-GM / UMA Driver or AMD M82XT /M86 Driver V8.452.2
    Conexant CX20561 Audio Driver
    Marvell 8040/8055 LAN Driver
    Synaptics Touch Pad Driver
    Alps Touch Pad Driver
    Conexant Modem Driver
    Netwaiting
    Modem Region Select Utility
    Wireless LAN Driver
    Chicony Camera Software
    Bluetooth Stack for Windows by Toshiba
    CIR Port Driver V7.1.62.2012
    TOSHIBA Value Added Package
    TOSHIBA Hardware Setup Utility
    TOSHIBA Supervisor Password
    TOSHIBA SD Memory Utilities
    Authentec AES1610 Fingerprint Utility
    TOSHIBA ConfigFree
    TOSHIBA WPS Library
    TOSHIBA Assist
    TOSHIBA Speech System
    TOSHIBA Extended Tiles for Windows Mobility Center
    TOSHIBA Remote Control Manager
    CD/DVD Drive Acoustic Silencer V2.02.00
    Toshiba HDD Protection
    TOSHIBA Face Recognition
    TOSHIBA TRS Driver
    Broadcom
    HDMI Control Manager
    Please do not ask me about single tools. Install all offered stuff following this list and I hope everything will work well.
    Bye

  • Need to install drivers for my ipod

    I got a new dell laptop w/vista in January. this was my first time connecting to my new computer. i was using it with a xp desktop before. when i connect my ipod i get a message that said "windows needs to install driver software for your unknown device." i click locate and install but it cant find the driver. can someone help me.

    i have found the answer to my problem. the driver can be found in the location c:/Windows/winsxs.

  • Proper software install order for MS-6341

         What is the proper order for loading chipset drivers, etc. after installing the windows 2000 professional operating system for the MS-6341 motherboard ??
         Does the 4 in 1 drivers include everything that has to be install for proper operation and what boxes should be installed during the 4 in 1 install or is it necessary to install the AGP software assuming an AGP video card is being used ??
         Thanks.

    i work for a small oem computer company and we found that if we install the 4in1 first and then the sound and then finally the video. does it make a difference? not sure but thats how we do it. hope it helps. almost forgot.... if it is a via northbridge chip then yes install the agp driver, even with on board video you will want to install it. usually running it with default boxes checked is the best.

  • ABAP & Java Preview install done. Need Post install steps for XI.

    Hi
    Please excuse for the most basic question.
    From the trial downloads, I've installed the
    ABAP and Java and would like to know the
    post-install steps for activating and configuring
    the Exchange Infrastructure component and
    subsequent configuration
    I've installed on the local host along with the
    Microsoft Loopback Adapter. What should be
    the connection parameters for the Visual
    Administrator?
    Any help is appreciated. Thank U.
    Rajendra.

    Hi Rajender
    I think no question is difficult or basic .The severity depends on whether you know it or not,in other terms your comfort level.
    Coming back to your post:Go through the below link
    https://websmp103.sap-ag.de/~sapidb/011000358700001697502004E.PDF
    Re: XI INSTALLATION and POSTINSTALLATION
    If you need the XI configuration guide then visit:
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ac6de690-0201-0010-54ac-8923089dcc97
    Any issues feel free to ask
    Reward with suitable points:

  • Need to get order for Adobe Photoshop 13 amended to reflect 32 bit system and for second order for same system deleted.

    I accidentally deleted partially completed order for for Adobe Photoshop 13.  It had my credit card info filled in but not the size of the computer (32 bit VS 64 bit)  I need order page to reflect 32 bit.  Trying to recover original order, I reordered a second Photoshop 13 by mistake and need it to be deleted . I don't know how to get corrections done?

    contact adobe support, https://helpx.adobe.com/contact.html

  • No need to Install antivirus for Mac?

    We no need to Install Anti Virus for Mac Book?
    If NO ,How to scan data when Insert external HD?
    If YES ,Do we have any good antivirus sw for mac?
    Thanks in advance

    For the full story, see my Mac Malware Guide.
    Note that connecting an external hard drive is not a significant source of concern with the types of malware that are out there right now, unless you got the drive from a real bonehead who might have copied some malware installers onto it.  That's very unlikely.
    Also, note that you'd be wise to turn off Java in your web browser and ensure that all Java updates are installed, due to the appearance of Flashback.G a few weeks ago.  See Flashback using Java vulnerabilities and Flashback infections becoming widespread.
    (Note that my pages contain links to other pages that promote my services, and this should not be taken as an endorsement of my services by Apple.)

Maybe you are looking for