NEED XSAN CONFIG FILE...3.5TB/14Drive

We had a corruption of our 3TBXSAN config file due to a rogue XSAN 1.1 controller on our XSAN1.0 network. We are attempting to reconstitute the XSAN volume, but we don't know the exact parameters of the XSAN. We striped across both Left and Right and put the metadata on the volume. We were running it under 10.3.9 with XSAN 1.0 controller. (We have since upgraded to a XSAN 1.1 controller running 10.4.2) In order for us to attempt to recover the data, we need that config file.
Anyone else out there still running this configuration? If so, please respond or email me at [email protected]
If you need the detailed information on which files and where they live, I can get that to you.
Thanks,
Cody

Depends on the motherboard. This one allows you to enable the onboard graphics only when no external card is found, or always enable. The PCI-E card initialises first, if that helps.
EDIT: Also I can confirm that it can run both cards (all three monitors) at the same time by switching to initialise the onboard card first, however that makes some weird stuff happen so I switched it back. And also the nouveau driver is shown in lsmod, and gets detected in the boot message logs.
Last edited by MisterAnderson (2012-01-26 16:56:58)

Similar Messages

  • Description of parameters need for config files in toplink

    files
    1)editor.properties
    2)editor.xml
    3)packageRename.properties
    4)prbuild.xml
    5)TOPLINK.xml
    6)wasDeploybuild.xml
    Thanks in advance
    liyasath

    From SP1 and beyond, you can use
    -Dweblogic.RootDirectory=<dirname>
    * The property for specifying configuration location:
    * The directory name of the domain from which to load the specified
    * configuration. The default is ".".
    * -Dweblogic.RootDirectory=<dirname>
    * The directory must exist.
    Dion Almaer wrote:
    Hi,
    I would like to point weblogic to a directory NOT under c:\bea\... for it's configuration.
    I used to do this on WLS 5.1 by setting:
    weblogic.home=/weblogic and weblogic.system.home=/projects/wlsconfig
    This way my config was NOT coupled to the weblogic install.
    I want to do the same thing, and have the config directory located in /projects/domainconfig
    for example.
    weblogic.system.home etc doesn't seem to do anything. The
    only variable that does anything is bea.home, but I need weblogic to find it's
    libs etc in /bea, but ONLY the config should be elsewhere.
    Any help would be great.
    Thanks,
    Dion[att1.html]

  • Need Xorg config file for dual graphics cards, triple monitors

    Hey guys, I'm having a bit of trouble getting triple monitors working on my system. The two plugged into the graphics card (radeon x300) work fine, but the one plugged into onboard graphics (geforce 6150SE) refuses to appear in xrandr. I figure I need to make a /etc/X11/xorg.conf.d/10-monitor.conf file but I'm confused about how to do it with separate cards. I find the wiki instructions that I can find confusing, as I've never had to deal with xorg files before (has always autoconfigured for me no problems).
    Relevant code:
    [greg@spacebar ~]$ lspci | grep VGA
    00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
    02:00.0 VGA compatible controller: ATI Technologies Inc RV370 5B60 [Radeon X300 (PCIE)]
    [greg@spacebar ~]$ xrandr
    Screen 0: minimum 320 x 200, current 2960 x 1050, maximum 4096 x 4096
    VGA-0 connected 1280x1024+1680+0 (normal left inverted right x axis y axis) 338mm x 270mm
    1280x1024 60.0*+ 75.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    DVI-0 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 430mm x 270mm
    1680x1050 59.9*+
    1280x1024 75.0 60.0
    1152x864 75.0
    1024x768 75.1 60.0
    800x600 75.0 60.3
    640x480 75.0 60.0
    720x400 70.1
    S-video disconnected (normal left inverted right x axis y axis)
    [greg@spacebar ~]$ pacman -Q | grep xf86-video
    xf86-video-ati 6.14.3-1
    xf86-video-nouveau 0.0.16_git20120106-1
    xf86-video-vesa 2.3.0-7
    [greg@spacebar ~]$ cat /etc/mkinitcpio.conf | grep MODULES=
    MODULES="radeon nouveau"
    I just can't seem to understand how to write the 10-monitor.conf file. I was wondering if anyone could give me a hand?
    Also, the third monitor to be connected via onboard VGA is also 1280x1024 and will be left of the other two.

    Depends on the motherboard. This one allows you to enable the onboard graphics only when no external card is found, or always enable. The PCI-E card initialises first, if that helps.
    EDIT: Also I can confirm that it can run both cards (all three monitors) at the same time by switching to initialise the onboard card first, however that makes some weird stuff happen so I switched it back. And also the nouveau driver is shown in lsmod, and gets detected in the boot message logs.
    Last edited by MisterAnderson (2012-01-26 16:56:58)

  • BIBeans connection with out using config file

    Hi All,
    I am trying to deploy BI Beans but I do not want to use config file. I am establishing connection to OLAP and catalog using connection object and can successfully connect. But the problem arises when I am using JSP to load any presentation as BIThinSession tag needs a config file.
    Can any one tell me how can I get around this problem? How can I present BIBeans presentation with out config file?
    Many thanks
    Shantanu

    try also to run the sql scripts
    AMDPATCH.sql and OLAP.sql,that are in the oracle or jdeveloper folder,launching them i solved this problem
    verify also that the bi_checkconfig don't present any problem loading OLAP metadata
    bye

  • Message missing Essbase config file?

    I am receiving a message saying that missing database config file?<BR><BR>I am not aware of each database needed a config file.

    Have you checked in the bin directory to make sure essbase.cfg file is there?<BR><BR>HTH.<BR>Ricky [email protected]

  • VDE config files change

    Folks after the last update I got the following message:
    vde config files should be placed in /etc/vde, sample files are provided.
    iptables and dhcpd sample files have been installed to '/usr/share/vde2'.
    Looking over its contents:
    cat /usr/share/vde2/dhcpd.conf.sample
    ddns-update-style none;
    subnet 192.168.254.0 netmask 255.255.255.0 {
    range 192.168.254.1 192.168.254.253;
    option routers 192.168.254.254;
    option domain-name "virtual.example.com";
    # find your DNS servers from /etc/resolv.conf
    # otherwise only pure IP addresses will work
    option domain-name-servers 192.168.254.254;
    option broadcast-address 192.168.254.255;
    default-lease-time 86400;
    at /usr/share/vde2/iptables.rules.sample
    *filter
    -A INPUT -i tun -j ACCEPT
    -A FORWARD -s 192.168.254.0/255.255.255.0 -j ACCEPT
    *nat
    -A POSTROUTING -s 192.168.254.0/24 -j MASQUERADE
    My original file:
    cat /etc/conf.d/vde
    # Set options for a vde daemon script
    # Array for your vde config files, eg.: "internal-net external-net"
    # You need a config file in /etc/vde/ with the same name.
    # Sample config file provided: /etc/vde/vde-config.sample
    VDE_CONFIG=""
    # Array for your dpipe connections, eg.: "connect-switches"
    # You need a config file in /etc/vde/ with the same name.
    # Sample config file provided: /etc/vde/vde-connection.sample
    VDE_CONNECTION=""
    Looking for VDE in archwiki:
    https://wiki.archlinux.org/index.php/QEMU
    So do I need to do anything?
    regards.

    For me the same. I think we can ignore it.

  • Why do we need to specify Role baseprovider and membership provider in Central Admin and security config files?

    Hi,
    why do we need to specify role base provider and membership provider files in central admin and securiy config files.
    thanks,
    gaurav

    We use 3 settings in Forms based auth:
    1 Membership = This contains Users and groups information. (This table also has username and password)
    2 ConnectionString = Connetion details to connect to database is stored here(servername, databasename, username, password, port )
    3 Role = This table contains all the Roles (Admin, contibutor, etc of the data source)

  • Need to append the assembly entry in web.config file while installing NuGet

    Hi,
    Consider that I need to create three NuGets. Second and third are dependents for first one. Each one has its own web.config file, which file content is same except one tag's value. While I'm installing the first NuGet, it will install the second and third too
    which is fine. The NuGets are installing one by one. But the issue is while I'm installing the NuGet in an ASP.NET project, the web.cofig file gets replace with one another that means the last NuGet's web.config file is only remains at last. But I need to
    append that tag value one by one. Is there any possibilities to create NuGets in that way? Please help me as soon as possible. Thanks in advance.
    I need this...
    <assemblies>
    <add assembly="Abc.EM, Version=10.0.0.1, Culture=neutral, PublicKeyToken=3d67ed1f87d44c89" />
    <add assembly="Def.EM, Version=10.0.0.1, Culture=neutral, PublicKeyToken=3d67ed1f87d44c89" />
    <add assembly="Ghi.EM, Version=10.0.0.1, Culture=neutral, PublicKeyToken=3d67ed1f87d44c89" />
    </assemblies>
    But I got this...
    <assemblies>
    <add assembly="Ghi.EM, Version=10.0.0.1, Culture=neutral, PublicKeyToken=3d67ed1f87d44c89" />
    </assemblies>

    Hi mathikp,
    One solution is to use the DTE object model to find the ASP.NET project, enumerate all the project items in the project to find the Web.config file. Then change the content by your self. This will be done after you install the Nuget package in the project.
    https://msdn.microsoft.com/en-us/library/envdte.project.projectitems.aspx
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Warning: All config files need conf:/etc/modprobe/sound

    when I boot I get about 20 of these messages which slows my booting way down.
    "Warning: All config files need conf:/etc/modprobe/sound,it will be ignored in future releases"
    What can I do do make it go away?

    You can search the forums and read the news on the frontpage before upgrading - Wonder linked you to the specific message.
    This has been covered over and over.

  • [SOLVED]Warning booting: All config files need .conf

    Recently i get this boot message:
    WARNING: All config files need .conf: /etc/modprobe.d/modprobe.conf.pacnew,
    I have another file called modprobe.conf.
    Do I just need to rename/delete the file??
    Thanks in advance.
    Last edited by Hyugga (2011-11-14 00:05:15)

    Yes... you should ALWAYS vimdiff (or whatever) your pacnew files against their existing counter parts to capture changes from the devs first!
    http://amjith.blogspot.com/2008/08/quic … orial.html

  • Hello disappeared from my version 37.01. Not in customize or config file, Nowhere, Need to restore.

    Hello,
    I was doing other work in my browser, clicked on something in my toolbar and "Hello" button disappeared. So did "Forget me" a short while later. While I've been able to find the forgetme button and put it back, the "Hello" button is no longer anywhere to be found. Not in my "customize" tab, not to be found in the config file under "loop.throttled" which doesn't exist in my config file. Where is the button? Can you tell me how to find it? I've looked for an "update firefox" button to hopefully update with it back but have not been able to manually update--I can't find the link. Thanks for any help!

    Do you mean loop.enabled ? You can double-check that as follows:
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the search box above the list, type or paste '''loop''' and pause while the list is filtered
    (3) If the '''loop.enabled''' preference is bolded and "user set" to false, double-click it to restore the default value of true
    If you change this, it might not have any effect in the current windows. You can launch a new window (Command+n) to see whether Hello returns to the toolbar.
    If Hello is enabled and the icon is still not to be found anywhere, you can reset your toolbar to its default icons. In Customize mode, look for the Restore Default button at the bottom, just right of center.
    Any luck?

  • SQL Agent Job failing - not using credentials in the config file for Data source

    Hi
    We have an SSIS pkg, that is secheduled as SQL Agent job using proxy account. The pkg contanins data source for connecting different SQL servers and the proxy account do not have access to the external DBs. The data source credentials are stored in the Config
    file.
    Why the job is not using the credentials in the config file and try to use the proxy account and failing.
    Do the proxy account need access to all the external dbs in the pkg, and then what is the purpose of the config file.
    I am sorry, i am not SSIS person trying to understand. If any one can explain tha will be great!!
    Thank you!
    VR

    Please take a look at these URLs:
    Schedule a Package by using SQL Server Agent
    SSIS package does not run when called from a SQL Server Agent job step
    Cheers,
    Saeid Hasani
    Database Consultant
    Please feel free to contact me at [email protected] as well as on Twitter and Facebook.
    [My Writings on TechNet Wiki] [T-SQL Blog] [Curah!]
    [Twitter] [Facebook] [Email]

  • Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ?

    Can any one suggest me how can I use relative path inside SSIS pacakge to access config file ? Please help me as its urgent.THanks for your help in advance.

    Hi Jay,
    SSIS can only recognize the absolute path of a XML Configuration file, the relative path is not supported. Furthermore, if the XML Configuration file is already generated, we can use the Environment variable package configuration type instead so that
    SSIS runtime automatically looks for the configuration file from the path defined in the environment variable. This is convenient when we need to deploy a package to different environment. We only need to define the environment variable for package configurations
    once on each server, and then the variable can be used by all the packages on this server.
    Regards,
    Mike Yin
    TechNet Community Support

  • How to specify a different config file for a weblogic 6.1 server

    Hi,
    I have 2 weblogic startup scripts (startWebLogic.sh and
    startWebLogic_recovery.sh) for the same domain.
    startWebLogic.sh uses config.xml file.
    I would like to use config_recovery.xml as the configuration file for startWebLogic_recovery.sh
    How would I do this ?
    I am using WebLogic Server 6.1 on SunOS 5.8 / HP-UX 11.0.
    Appreciate any help.
    Regards
    Gunaseelan Venkateswaran

    Hello Gunaseelan,
    This is not possible because WLS 6.1 needs a config.xml file, exactly this
    name, to start.
    What you can do is to define a recovery domain, called myrecovery_domain for
    instance, and put the config_recovery.xml, renamed "config.xml".
    Hope this helps,
    Ludovic.
    Developer Relations Engineer
    BEA Support.
    "Gunaseelan Venkateswaran" <[email protected]> a écrit dans le message
    news: 3cd6a324$[email protected]..
    >
    Hi,
    I have 2 weblogic startup scripts (startWebLogic.sh and
    startWebLogic_recovery.sh) for the same domain.
    startWebLogic.sh uses config.xml file.
    I would like to use config_recovery.xml as the configuration file forstartWebLogic_recovery.sh
    >
    >
    How would I do this ?
    I am using WebLogic Server 6.1 on SunOS 5.8 / HP-UX 11.0.
    Appreciate any help.
    Regards
    Gunaseelan Venkateswaran

  • Replacing Time Capsule - can I save my old config file to use with new one?

    I have a Time Capsule backing up 3 of my Macs. A couple of nights ago, I started receiving the following: "sparsebundle” could not be created error 22
    on all 3 Macs.Time Machine application fails due to this error and if I access the Time Machine in Finder, I can see the 3 volumes but cannot go any deeper. I get the same sparsebundle error.
    A few minutes ago, my wife called me stating that her MBP gave her a backup error stating that the backup Volume name changed, continue or don't backup. Something weird is obviously going on. I also noticed that the TM fan was kicked up into high gear. I'm suspecting a hardware failure of some sort.
    Thoughts?
    If I do need to replace my TC, is there a way to save the config file from my old one and import/use it on a new TC if I have to purchase one? Would save me from entering a lot of wireless access devices since I use MAC filtering.

    Yes you can easily import/export settings ( I have 6 base stations so do this quite a lot - in fact I always export the configs as a backup anyway)
    As to your TC can you connect it locally and run Disk Utils to see if it need some repairs?
    Regards,
    Shawn

Maybe you are looking for