Need Xserve Replacement Drive

Need a replacement for one of our internal SATA drives on our Xserve Intel. There are no Apple drives out there...what do folks recommend for a replacement that is server-worthy?
Thanks!

Which XServe model do you have? I have been able to use the following drive (actually, 2 of them) in a 2008 XServe, 2.8 GHz quad core.
Seagate Constellation ES 1 TB 7200RPM SATA 2.0 3Gb/s 32 MB Cache 3.5 Inch Internal Hard Drive ST31000524NS - Bare Drive
The Sata III version of the drive was *not* recognized by the XServe.

Similar Messages

Hp g70-467cl: the ts-l633m DVD gives a code 39 error, I need a replacement driver to correct this

I have a HP G70-467CL Notebook PC Computer and I'm getting a (Code 39) error on the TSST corp CDDVDW TS-L633M ATA Device I'm running Windows Vista 64-bit Operating System the error says it is missing or has a corrupted driver issue. and when I checked for a solution nothing came up. Can anyone help me obtain the correct needed device driver? the only device drivers I could locate were for sound, display, chipset, modem, and LAN. I have already exhausted the available troubleshooters onsite HP and Microsoft. Thank you all.

Have you ran "Windows Update"? It can sometimes locate drivers for the hardware that is installed. If that doesn't work for you, let me know and I will see if I can find anything for you.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have a macbook air from mid 2012. After installing the MacBook Air Flash Storage Firmware Update 1.1 my computer shuts down instead of restarting. Does my macbook need a replacement drive?

Anyone experience the same result after installing MacBook Air Flash Storage Firmware Update 1.1? Why did my macbook shut down?

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
If this does not help, contact Apple.
Best.

I need a replacement hard drive for my iPod Classic 80GB ... where???????

I have accidently damaged the hard drive in 80GB Classic iPod. I need a replacement drive , where can i get that from. There is a slight dint at the back of the unit, right where the hard drive sits, because of this Apple Warranty is not valid.

http://www.ifixit.com
Google not working on your computer?

Finding replacement xServe RAID Drive Modules for sale

I've just started a new IT job and inherited an xServe (snow leopard) and xServe RAID
I'm not an expert on either. I've some experience with OS X Server, but I've never been a full on server admin.
One drive is dead. I believe they're 500GB units in the first six bays.
I also believe this is the most recent xServe RAID hardware. Purchased in 2008 or so.
So, first, where on earth would I buy a replacement?
And assuming that's possible, what are people's suggestions for buying drive modules for the other bays, and replacement parts for the xServe itself (power suppies, etc.).
Thanks!

first of all i don't have experience with proprietary Apple products, but typically i believe you can buy any hard drive so long as the interface is compatible (SATA or SAS for example) and the size is the same. there should not be a need to buy 'special Apple xserve hard drives'. if you buy a drive larger than 500 GB then the extra space beyond 500 GB will just be ignored depending on the type of RAID you have setup. definitely do not buy a disk smaller than 500 GB. pull out the disk that is bad and see what the make/model is. my xserve uses Seagate drives so you could probably just search eBay or whatever for the model number of the drive and use that. the hard drive should be able to be removed from the caddy so you don't really need a whole new "module".
as for power supplies those are proprietary and will need to be purchased thru apple or somewhere else like eBay, just search for the part number...

Proper procedure for replacing drive in Xserve RAID RAID5 set

I've got a five-drive RAID-5 set (with a sixth hot spare) in an Xserve RAID running the 1.5/1.50f firmware. One of the drives in the RAID-5 set has an amber/orange status light on and has been getting occasional errors like to following:
Timestamp: 11/10/10 10:34:53 AM
Priority: Warning
Controller: Upper Controller
Type: 112
Event ID: 1000
Event: Disk 5 Reported An Error. COMMAND:0x35 ERROR:0x10 STATUS:0x51 LBA:0x19B80
Description: The drive reported an ATA error. This is a failure in the communication from the RAID Controller to the drive.
I have double checked the drives in RAID Admin and, as the drive is only in a warning state, the hot spare has not been pulled into the RAID set yet. As this is an old drive, I'd like to replace that particular drive first. I have a current, full backup of the data, but want to make sure I understand the process correctly.
I understand the "Installing or Replacing an Apple Drive Module" section of http://manuals.info.apple.com/en/XserveRAID_UserGuide.PDF, but it and RAID Admin's built-in help don't describe what will happen when replacing a drive in a RAID set that has a hot spare. When I pull out the drive and replace it, will it correctly use the newly inserted drive or will it use the hot spare? If it uses the hot spare, will the hot spare revert back to a hot spare once the new drive is inserted or will it permanently become a member of the RAID set and need to be moved to the original drive's slot? Or, should I just pull out the hot spare, pull out the failing drive, and pop the hot spare into the failing drive's slot?

Hello, makkintosshu, and welcome to the AppleBoards,
If you pull out the drive the RAID should/will immediately start rebuilding using the hot spare. The hot spare will become a new permanent member of the RAID and the new replacement drive will become the new hot spare. The physical slot locations of the drives don't matter you can build a RAID from any combination of drives as long as they are on the same side.
If you pull the hot spare and then the failing drive the RAID will wait for a new drive before taking action. I find it hard to recommend this course of action unless there is a really good reason for you not wanting the hot spare to become part of the RAID. Rebuilding is going to take a good long while and you want it to start as soon as possible - as long as the RAID is not rebuilt your data is at risk. Letting the RAID rebuild hang as you physically swap out the failed the drive strikes me as bad idea that needs a really good justification.
HTH,
=Tod

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

I need to replace my laptop Hard drive. How do I get my iTunes off the old hard drive to an external so I can put it back on the new hard drive?

Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy?

Do I need to replace my Hard Drive?

My Mid 2012 13" MacBook Pro recently was not able to boot on startup when I reset the NVRAM. I looked on the commands and there was something to do with a hard drive error. I had to reinstall OS X for me to use it again.
Since then my computer has been unusably laggy at times and performance has dropped. YouTube and other videos will lag uncontrollably and Minecraft runs at about 1 FPS. I am also running bootcamp and problems are consistent on Windows 7 as well. Do I need to replace the Hard Drive or just completely reformat it and reinstall OS X from a bootable disk?
THANKYOU

You shoudn't consider replacing your drive unless you know that's the problem. AHT, to the best of my knowledge, does not do surface scans on drives and it can't tell you if you have bad sectors. It can, however, identify other problems so running tests on the system might help you.
Other things to consider are the following:
How much free disk space do you have? If you're running out of disk space the system will not be able to swap out properly or easily and your system will bog down.
How much memory are you using? If you're using a lot then swapping will be rampant and your system will slow down.
Are there problematic applications that don't work properly that are consuming too much memory or hitting your system with a lot of disk reads and writes?
If you're using Mountain Lion, have you upgraded to 10.8.4? If not, do so. A lot of your problems may disappear.
The easiest way to check the first 3 above is with Activity Monitor. You can find a good write up on it with the following link:
http://www.scsc-online.com/Activity%20Monitor.html
I'm sure there are others on the web that are every bit as good as well. If you're still convinced your drive is the problem then check out this link for a list of drive testing tools:
http://forums.macrumors.com/showthread.php?t=1544280
That list is pretty much the web's de facto standard list of reliable hard drive testing tools currently available for Macs, and it's reasonably up to date, unlike some of the other lists on the web that are 5 years old or older. I really wouldn't assume it's the drive until you check out other stuff first.
Good luck, diddypants.

I need to replace my late 2006 20" imac hard drive

here's what i have
VIN,IMAC (20-INCH LATE 2006)
running leopard 10.5.8
Hardware Overview:
Model Name: iMac
Model Identifier:    iMac5,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 3 GB
Bus Speed:    667 MHz
Boot ROM Version: IM51.0090.B09
SMC Version (system): 1.9f4
Serial Number (system): W8******VUV
WDC WD2500JS-40TGB0:
Capacity: 232.89 GB
Model:    WDC WD2500JS-40TGB0
Partition Map Type: GPT (GUID Partition Table)
S.M.A.R.T. status: Failing
Volumes: Macintosh HD:
Capacity: 232.57 GB
Available: 106.04 GB
Writable: Yes
File System: Journaled HFS+
BSD Name:    disk0s2
disk utility shows this:
my mac is still running like a champ but as the pictures above show it's time
i've found a lot of people with the same question i have on this site with answers but most links that people suggest are broken or 2 of the hard drives they've recommended are discontiued
i've got a frys electronics and best buy near by or internet if that's the best way to go about it
what exactly do i need to look for when i'm at a store or online?
what size hard drive, any? 250GB, 500GB, 750GB, 1TB
3.5" SATA
7200RPM
does cache matter?
anything else?
people's responses to: Need to replace my late 2006 imac hard drive - what should i be looking for to replace it?
1. You can use any 3.5" Sata drive, WD or Seagate would be good choices.
2. Do not use "green" drives like the WD Blue series. WD Black are fine as are Seagates.
3. The 2T green will work fine in the Intel iMac's. I always suggest using the quieter and cooler running Blue's or Green's in the iMac's.
4. Personally I have upgraded the Hard Drive in several Early Core Duo's using both 320GB and 500GB WD Cavair Blue's.
5. WD Caviar Blue or WD Caviar Green, they run cooler and quieter than the WD Black or Seagate's.
6. I'm very happy with the WD Caviar Blue that replaced my factory installed 160GB Seagate HD a few months ago.
i've found some good DIY tutorials for install
http://www.youtube.com/watch?v=ShY8zuT-wPg&feature=player_embedded
http://www.ifixit.com/Guide/iMac+Intel+20-Inch+EMC+2105+and+2118+Hard+Drive+Repl acement/1092/1
any help will be appreciated,
sean k
<Edited by Host>

thanks for the quick reply kappy,
i plan to purchase a new imac when they are actually shipped, in stores, and i know all my handicap assisted devises will work on it
you say "Do not buy a drive designed for SATA 3 6 Gb/s interfaces as some may not work on the controller in your iMac"
at frys it breaks the groups like this:
Interface (32)
SATA/300 (17)
SATA/600 (9)
PATA/100 (6)
could you take a look at this link to frys and recommend a hard drive
http://www.frys.com/search?cat=-69564&pType=pDisplay&fq=100413%203.5-100415%2072 00
or bestbuy internal hard drives
like you said it's got a limited life and just need something to get by till the new imacs arrive

I I have a late 2005 power PC G5 that I want to bring back to life. I need to replace the original hard drive, a Maxtor 250 GB Sata. Can I replace it with modern drives, SATA 5-6 etc?

I have a late 2005 power PC G5 that I want to bring back to life. I need to replace the original hard drive, a Maxtor 250 GB Sata. Can I replace it with modern drives, SATA 5-6 etc?

I knew I should never get rid of my old G5's. By the way, there is a browser still supported for the PPC, TenFourFox, if you're not using it already. Go to the Floodgap website (they author it) download it for free. The only thing it doesn't support is the Flash plugin, but the browser works great. Other video types are supported. It's based on Firefox, and runs most of the plugins and add-ons. It's very fast, and beats all other browsers on the browser compatibility and speed test. That's now my default on my G5's. Firefox and Safari are no longer supported. As far as the OS, both Tiger and Leopard were solid for me. The reason, as I stated before, was iMovie. The version in Tiger with iLife was far superior to what Apple changed it to. They 'dumbed it down' for the masses. Even the newest iLife 11 on my Mac Pro quad isn't is good, in my opinion. So Leopard should be fine for you. It's a much larger browser in terms of sheer megabytes and disk space, but it's fine. As far as getting an OS disc, I'm seeing Tiger for about $45.00, Leopard for $50 - 60.00 on that famous auction site. As far as RAM, I have 8GB in my G5 2.3, but you should check Activity Monitor when you are running your apps. See how much green slice you have left (unused RAM). You might find you don't need eight. A Mac Pro will grab more free RAM than a PPC machine will. I have a hard time maxing out use of my 8 on the PPC. Not true with the eight on my Mac Pro. The OS doesn't hesitate to grab and use it. You might be OK with 6GB on your PPC. More will not make you faster, as long as you still have free RAM available. As far as backup on your resurrected machine: look for a firewire enabled backup if can. Use CCC (Carbon Copy Cloner) and make a clone backup. Next time your PPC machine wipes out the hard drive, just take your Firewire drive and plug it into another PPC machine, and you can select it as your boot drive. You'll be back and running in five minutes. You can also take the physical drive out of your enclosure, and put it in your tower to replace the failed drive, and you'll be back to where you were in less than ten minutes, OS and all. The PowerMac has an 800 port, so you can do the 800 on the machine to an 800 port on your backup. A firewire 800 to 800 cable is only about $8.00. It runs nice and fast through the 800 port. I like the OWC Mercury Extreme enclosures. They use USB, Firewire 800, and eSATA, so all your options are open.

Pioneer DVD-RW DVR-K06 replacement drive needed

My iMac started having problem ejecting DVD/CDs and now the drive is damaged. I need to find a replacement drive (AppleCare expired). I know there are 2 possible types of superdrives were used on the late 2006 24" iMac. One is with a 12.7mm slot and the other one is 9.5mm. I am not sure which one I should get but here is my specs. I think the DVR-K0-6 is discontinued. Could someone tell me what replacement drive I can use? thx CK
Pioneer DVD-RW DVR-K06 Firmware: Q609 ATAPI
Model Identifier: iMac6,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.16 GHz
Message was edited by: calvin ki

Hi calvin ki
You can get either new or refurbished OEM drive from WeLoveMacs
New Apple Original Part > http://www.welovemacs.com/6614391.html
Refurbished pulled from a working machine > http://www.welovemacs.com/6614391r.html
Or for way less $'s an External Drive > http://eshop.macsales.com/shop/firewire/optical-drives/
Dennis

I have a HP G71 Model#G71-329WM. I need to replace the optical drive. What is the part Number?

My HP G71 Model#G71-329WM will not load a CD or DVD so I need to replace the optical drive. What is the correct Part number? Thanks
This question was solved.
View Solution.

Hi:
Below is the link to the service manual for your notebook.
http://h10032.www1.hp.com/ctg/Manual/c01713747.pdf
Replacement optical drives with HP part numbers can be found in Chapter 3, page 33.
You can also read the instructions in chapter 4 on removing the drive and getting the part number off of it which will be normally found on a white sticker. A 6 digit-3 digit part number (123456-001)
You can search by the part number on eBay for a used but working device or you can probably buy one new from HP by entering the part number at the link below.
http://h20141.www2.hp.com/hpparts/Default.aspx?mscssid=6287767FBDD34F3696CF3D0837BDBC96
Paul

Needed to replace Hard Drive, bookmarks gone, Tried restore but no files found.

Needed to replace my hard drive, lost my bookmarks, tired restore, only had one old file, but did not obtain any old bookmarks. Any suggestions?

Hello Anonymous.
Although possibly not related to your problem, I will remind you that the version of Firefox you are using at the moment has been discontinued and is no longer supported. Furthermore, it has known bugs and security problems. I urge you to update to the latest version of Firefox, for maximum stability, performance, security and usability. You can get it for free, as always, at [http://www.getfirefox.com getfirefox.com].
As for restoring your old data, hopefully this support article will help you understand what you should do (should have done):
https://support.mozilla.com/en-US/kb/Backing+up+your+information

Hard drive crashed, replaced drive and need to reinstall CS5 Extended but I don't have serial number, only product code on box. How do i get my serial number?

hard drive crashed, replaced drive and need to reinstall CS5 Extended but I don't have serial number, only product code on box. How do i get my serial number?

Beamer96 if the software has been registered then it will be under your account at http://www.adobe.com/. You can find more details at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Need to replace my DVD drive please help

I need to replace my DVD drive for my Power G5 (bought in 2002), is ATAPI the right connector?

Ok, I have bought one as suggested, I thought there have 2 types of cable connectors i.e. ATA or IDE. Will try to replace it later today when I finish from the work

Need Xserve Replacement Drive

Similar Messages

Maybe you are looking for