Need your assistance in mapping Structure and Field in DME Tree

Hello Friends - I need your help in "Mapping from structure field" in DME.
In the existing format tree, It is mapped Structure as "FPAYP" and Field name "BNAME" to populate Company Code name in the Payment file.
Now I am asked to change this to populate value either from OX02 or OX15.
When Company Code name was maintained, It was maintained in short and in the address tab, Full name is maintained.
Please let me know which Structue and Field I should assign to pull the value either from OX02 or OX15.
Thanks for your help.

Thanks a lot Henri/Lakshmi.
I have maintained mapping procedure Sturecture/field - FPAYHX/AUST1 to get the CoCd name in the file. In AUST1, Length of the CoCd is more than 18, and as per Bank format, It should be 18 characters in length.
User is not happy that complete CoCd name is not populated in the file. He has come up with an alternative and shortened the CoCd name that needs to be populated in the file and suggested us to get the value into the payment file. We should not replace CoCd name with the name he suggested in OX02/OX15,FBZP.
My doubt is that if there is any filed I can use to maintain the name he suggested and assign it in mapping procedure.
Thanks

Similar Messages

I need your assistance? Verizon won't port old phone number over to my new FIOS

Need your help on resolving this issue with Verizon.  I switched from COX cable. Had Verizon FIOS triple play installed at my house about 3 days ago. I signed up online for Verizon FIOS and selected a new telephone number because I was told online that my old number cannot be ported over to new FIOS.
Earlier today, I was contacting my friends for a new phone number and learned from them that it is violation of FCC regulation that the Verizon FIOS could not port my old number. They said that the Verizon should be able to port my old number... In my realization, I contacted Verizon customer service, but the rep said that the Verizon FIOS cannot do it because the installation is completed.
I wanted to keep my old telephone number that I had years originally with Verizon and then Cox.
Any ideas on how to get or make Verizon port over my old telephone number to my Verizon FIOS? Again, I was told by a Verizon rep or online during the sign up process that it can't be done and/or they won't do it.

Need your help on resolving this issue with Verizon.  I switched from COX cable. Had Verizon FIOS triple play installed at my house about 3 days ago. I signed up online for Verizon FIOS and selected a new telephone number because I was told online that my old number cannot be ported over to new FIOS.
Earlier today, I was contacting my friends for a new phone number and learned from them that it is violation of FCC regulation that the Verizon FIOS could not port my old number. They said that the Verizon should be able to port my old number... In my realization, I contacted Verizon customer service, but the rep said that the Verizon FIOS cannot do it because the installation is completed.
I wanted to keep my old telephone number that I had years originally with Verizon and then Cox.
Any ideas on how to get or make Verizon port over my old telephone number to my Verizon FIOS? Again, I was told by a Verizon rep or online during the sign up process that it can't be done and/or they won't do it.

HT201320 Dear all, while i was trying to dowload an application i received an error "your apple id has been disabled" . I need your assistance

Dear all, while i was trying to dowload an application i received an error "your apple id has been disabled" . I need your assistance

You will need to contact Apple support: http://www.apple.com/support/itunes/contact/

Mapping 0currency and field RTCUR and CURRUNIT

Hello Everyone,
We are using 0EC_PCA_4 and there are two fields in the transfer structure:
1. Currency Key RTCUR
2. Currency Unit CURRUNIT
What do these fields get mapped to? Does 0CURRENCY get mapped to RTCUR, and if so, then what does CURRUNIT get mapped to in BW?
0UNIT in BW is already mapped to QUANUNIT.
Thanks, Colleen

I have the same issue. 0CURRENCY is mapped to CURR UNIT. But, I do not have a value in the Currency field of the Infocube. How do I get the right currency into the cube/ODS. Do I need to map this any other object or is there any special setting for this...
Thanks,
RR
Message was edited by: R R

Need some assistance in binary streaming and reading

Hi,
altough I studied the examples delivered with LabView (my current version is 6i) I have some challenges to face and I hope someone could help me. This challenges
may be simple for professionals but I'm not already that experienced. I have an one channel AI input via a DAQ-card (E-series) and I want to write it to a binary file with only the really necessary headers. The data then stored in the binary shall than be displayed after user request to a graph and my client wants to have the possibility to srcoll through the hole stored data to seek some charakteristiks and then mark the area of interest with cursor to move this area to another graph for further analysis. My program is structured in a way that in a whi
le loop I wait for user interaction i.e. buttons for saving and displaying data. It's for that, that I think I have to split the binary streaming in a sub-Vi that makes the needed preparation and another sub-Vi assosiated to the first that makes the file writuing and thats placed within the loop described above. Maybe I'm with my thoughts on the woodway and someone has better ideas. I tried many things but the result were always frustrating. I would be glad someone could give me some hints based on experience, and not just saying "Look to the delivered examples" as I already read in questions from other users. Thanks for your support.
Chris

I think you're going at this in a good way. One issue I see is that you are using version 6i and waiting for user input. Since Event Structures were not available in 6i, you will have to poll for user input and that could make your application slower. An upgrade to 6.1 would help you there.
Besides that, I like your ideas. If you're sticking with 6i, use a case structure inside your while loop which executes a particular case based upon which button the user pressed. Then, in these cases, call the subVIs which you built. I hope this helps out.
J.R. Allen

Archiving: Info-structures and field catalogues

Hi there.
My question concerns the field catalogues which are used to configure info-structures for archiving objects.
As far as I understand it, I can only run reports via the Archive Explorer on the fields which I have included in the info-structure for an archiving object - is this correct? Or can I only use the fields in the info-structure for selection, but display all fields available in the archive-object?
As a last question: Can I create field catalogues with theoretically all of the available fields of an archiving object?
Thank you very much.
Andreas

Hello Andreas,
The fields that are transferred from the field catalog into the infostructure are used to assist with selecting the relevant archived data. The infostructure will contain the fields that have been transferred, plus the archive file name and the offset of where the archived data is stored. This gives you access to all of the data that was archived.
Technically, you can create a field catalog and relevant infostructure with all of the available fields, but I would not recommend that approach. The infostructure is a table in the database. So, the more fields that are used, the bigger this table will become and may defeat the purpose of archiving the data in the first place :-).
I hope this helps.
Regards,
Karin Tillotson
Message was edited by: Karin Tillotson

CProjects Fields - Structures and field Controls

Hi,
On the Project -Additional Data tab on cProjects, we have a field which is called Project "Created by". I am trying to locate where is that field stored in the tables. I saw that under the field controls ,an external structure is maintained and this feild is available there but not sure how to view the data in that structure ( i guess we can't view this data as its under a structure).
Since we have the accounting integeration on, so when we transfer the Project ,the Projects gets created in the backend ( ECC) with a "created by" of the repsective cProjects server name.
All I am looking for is who created the Project ( as in cProjects) and the date on which it was created.
Thanks.

Hi,
The structure is DPR_TS_UI_PRJ_DATA.
If you need to get the values you should use method get_detail_data of class cl_dpr_ui_log_project_detail.
Regards,

I Need your help, can you read and help me? Thank You

I purchased a macbook pro retina in December 2014 , Yosemite original . I need instead of Mavericks 10.9.5 to use protools 10. I do not know how to download the installer of mavericks . My girlfriend has a macbook pro retina instead of 2013 with Mavericks . I might download to you by your computer the installer on a USB 16-gigabyte , but we do not know where to find the installer of mavericks on his computer . Can you help ?

Either connect a regular external drive to the older MacBook Pro or use the Disk Utility to partition the new one's internal drive, connect the two computers through FireWire or Thunderbolt, restart the new one with the T key held down, start the older one from the recovery partition(press the Command and R keys at startup), and install the OS.
If you're actually able to download the installer from the Mac App Store, you can use it instead of restarting from the recovery partition.
(125224)

Please, I need your assistance...

Please, I have an ipad 4 cellular wireless. I downloaded some songs with a browser and a downloader. I want to move it to iTunes so that I will be able to always play it from there, but I seem not to be able to do it. Any assistance on that from anybody. Thank you.

Depending upon what app that you downloaded them with then you might be able to copy them from that to your computer's iTunes via the file sharing section : http://support.apple.com/kb/ht4094
If they are in a compatible format you can then add them to your computer's iTunes library via File > Add To Library and you can then sync them to the Music app on your iPad - syncing, and downloading from the iTunes store app directly on your iPad, are the only ways to get music into the Music app.

Options Screen - Need your assistance.

Hello,
When you click on "Options" in the menu section, are you able to see "General Options"? I want to change the default volume for calls but the instructions for the 8900 Curve is telling me to do the following:
1. In the phone application press Menu key.
2. CLick Options
3. General Options (Which I don't see)
4. Default Call Volume field
5. Press Menu Key
6. Click Save
IS there a different route to take? Or do I have a software problem.
Also, can I change my ringtone or alert tone for my text messages? If so, how do can I do that.
Thanks for your help!
Solved!
Go to Solution.

The Profiles are the volume settings for your phone. So you can change the profile settings to Loud, Normal, Vibrate, etc. You can either go to your profile settings from the main screen or the Application Menu screen.
From the Main Screen scroll up to go to your Profiles
In your Profiles, scroll all the way down and select Advanced
In the Advanced settings, you can edit each profile. Scroll to the profile you'd like to edit, such as Normal. Hit the menu key, and select Edit.
You will then be taken to a list of all the applications that requires a ringtone. You can edit the tone, volume, etc for each one.
To edit the ringtone for your voice calls, select Phone. When done editing, hit menu to save your changes.
To edit the ringtone for your text messages, select SMS Text. When done editing, hit menu to save your changes.
Please Kudos me if that helped and mark as resolved if I did so
Message Edited by mizmellyjelly on 01-11-2009 11:50 PM
..miz melly jelly.. - click to follow on Twitter!
Don't forget to Kudos me

Purchased QNAP 469-Pro NAS, need your assistance upgrading my home network components

Hi everyone,
First of all, I apologize if I am posting my question in a wrong sub-forum. Having said that, I've recently purchased a QNAP 469-Pro NAS -- http://www.qnap.com/en/index.php?lang=en&sn=822&c=351&sc=513&t=520&n=9786 -- that has dual gigabit lan ports. The unit also supports link aggregation ( otherwise known as port trunking or IEEE 802.3ad). Currently I have a WRT 610N wireless router and a TP-Link 8 port gigabit switch that does NOT support link aggregation. Now, I would very much appreciate it, if you helped me by teaching me how to best upgrade my network components so as to fully utilize the performance (or come close as much as possible to the advertised performance) of 221.8 MB/sec Reading, 220.8 MB/sec Writing mentioned on QNAP's website. I have all of my files (movies, music, personal data files, etc) stored on the NAS. I get roughly an abysmal ~38Mbs right now. My household uses the NAS constantly to stream from and download to the NAS. Any help would be greatly appreciated. Many thanks in advance....
P.S.. There are two MB Pros (2010 Core I7, 8GB ram) and two iPads (2) that are most of the time connected to the networking either watching something or browsing the web.
Amir

What if I use SLM2008 for the switch? Then all i need is a wireless router that gives me a perfomance closer to the rates I have mentioned in my original post ( actual throughput, not advertised rates).

It me agian i need your assistance.

well i tried to build a Active X for OUTLOOK 2000 and 97 and i seem
not to have success. what i'm trying to do is have a MAX and MIN Limit on
data capture VI and then if the project goes out of specification alarm then
goto to a email or pager capability of course when i activate the OUTLOOK
this will call my modem then send the numeric page???? please help anyone...
i'm at the final of my project i seem to be stuck at this section.
i use LV 5.0.1 with the G code.

Hi mark,
If, once you follow Steve's instructions, you find that the App says "Downloaded" next to it instead of the cloud, go back into your Apps tab (not in the store, but the one for your computer in iTunes), and drag the offending app into the trash - delete it from iTunes when the question comes up.
At that point, you should quit iTunes, then reopen it, and follow Steve's instructions again. This time you should see the cloud...proceed with Steve's instructions.
Cheers,
GB

Attn: deathstalker i need your assistance

i checked the athlon recommended motherboards a while back for the 2200xp's. the board meets qualification according to amd (then), but it used to say for bios 2.6. now after not able to boot up at all with the 2200 i replaced my 1600 in there and did a look back. it says that bios 2.7 is what is needed. i was wondering if it is possible to be sent a beta bios? i will comply with certain agreements if need be. please, give me a reply to my msn account [email protected] this way i can give you my preferred address for easier transfer and communication. tia
note bios 2.6 max mult is 12.5 needed is 13.5.

thanks i did when i got in from work, but no go at all. diag lights all red and no post. i checked the bios multipliers before i did it anyway and it only went up to 12.5. anyone have any knowledge as to why they say bios 2.7 is needed and i have it but it is not capable to run that multiplier?
thanks again

I need your assistance,can you please help?

Hello to all,
To make a long story short, I had installed the software "Net Nanny" but had to take it off as it was creating too many problems.Anyhow, I think something happened with an Adobe _____??
When I RIGHT click on my desk top or on some of my folders I get the following message:
Explorer EXE Fatal Application Exit
"The specified module could not be found. C:\Program Files\Common Files\Adobe\Adobe Version Cue CS4\Client\4.01\Version Cue DLL."
I reinstalled by Adobe 9.0 Professional but I keep getting this message and it's horrible. For example, I cannot right click to do a "scan disk" because this message pops-up.
Thank you for any assistance!

Sounds like the problem mentioned in.
http://kb2.adobe.com/cps/408/kb408524.html
This is probably unrelated to Acrobat but related to Creative suite. Please try the Version Cue forum:
http://forums.adobe.com/community/creativesuites/version_cue_windows?view=discussions

How to do Query optimization?It takes more time to fetch the record from db. Very urgent, I need your assistance

Hi all
I want to fetch just twenty thousands records from table. My query take more time to fetch twenty thousands records. I post my working query, Could you correct the query for me. thanks in advance.
Query
select
b.Concatenated_account Account,
b.Account_description description,
SUM(case when(Bl.ACTUAL_FLAG='B') then
((NVL(Bl.PERIOD_NET_DR, 0)- NVL(Bl.PERIOD_NET_CR, 0)) + (NVL(Bl.PROJECT_TO_DATE_DR, 0)- NVL(Bl.PROJECT_TO_DATE_CR, 0)))end) "Budget_2011"
from
gl_balances Bl,
gl_code_combinations GCC,
psb_ws_line_balances_i b ,
gl_budget_versions bv,
gl_budgets_v gv
where
b.CODE_COMBINATION_ID=gcc.CODE_COMBINATION_ID and bl.CODE_COMBINATION_ID=gcc.CODE_COMBINATION_ID and
bl.budget_version_id =bv.BUDGET_VERSION_ID and gv.budget_version_id= bv.budget_version_id
and gv.latest_opened_year in (select latest_opened_year-3 from gl_budgets_v where latest_opened_year=:BUDGET_YEAR )
group by b.Concatenated_account ,b.Account_description

Hi,
If this question is related to SQL then please post in SQL forum.
Otherwise provide more information how this sql is being used and do you want to tune the SQL or the way it fetches the information from DB and display in OAF.
Regards,
Sandeep M.

Need your assistance in mapping Structure and Field in DME Tree

Similar Messages

Maybe you are looking for