Need your ears for a moment
Hi all,
I was wondering if the pros out there who understand guitar recording might be willing to lend me their ears for a moment. I did an acoustic guitar track yesterday using the ORTF method, mics about 8" away from the guitar, and I like what it sounds like (which I know is probably the most important thing) but would like an opinion from the opinionated and critical on this list.
So if you have a moment to lend, please email me to the address on my profile and I will post the acoustic guitar track for you to listen to. I won't post the whole song, it will get repetitive but a selection of parts.
Thanks in advance.
Hi,
I am curious to hear the results of your recording. ORTF is really a room technique for live tracking, eg. in a concert hall. At 8" distance from the source, and 110 degrees for ORTF, your signal will mainly comprise off-axis colouration. The trade-off is that it has a good chance of having a more balanced spectrum. The caveat here is the room. Was this done in a big room? Iso booth? Concert hall?
The other consideration is the mix. If it is solo, the situation is much easier. What else will be in this mix?
I would suggest mid/side for a good stereo balance in closer situations . If you are using a pair of 414s, as I do, I can guarantee good results. M/S has perfect mono capability, and might even be a good idea for a mix of several instruments, depending on what how much room sound you are looking for for each instrument.
In the end, the two most important factors will be 1) the room sound you are looking for, and 2) the mix you intend to create.
PowerBook G4 1.67 2GB Mac OS X (10.4.5) Logic 7.2 / MOTU Traveler / RME Octamic-D / Tascam US-2400
Similar Messages
-
HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS IN ADVANCE
try this website this should help you http://helpme.viber.com/index.php?/Knowledgebase/List/Index/1/iphone
-
Need rack ears for SR224 series switch. Please help.
I need a pair of rack ears for an SR224 series switch. (11-inch wide chassis)
Please direct me to a part-number and a source.
Thank you!You have posted exactly the same question on the WAN Routing and Switching forum where it has already gotten some response. I suggest that we consolidate any discussion to that forum.
HTH
Rick -
I need Your Help for CAF/EU/GP/API Guided Procedures
Hi everyone, I need your help about Guided procedures CAF API, I am developing an WEB DYNPRO Callable Object for Guided Procedures, but I need to get the task name of the running proceess on Guided Procedure once time a user initiated it, if is possible? Do you have an examples?
Thenk you very muchHi,
Yes you can retrieve the task name of the running process. Here is what you need to do.
1. Get the process instance - IGPRuntimeManager - > getInstance()
2. Get the IGPActivityInstance(s) from the process instance - processInstance.getChildrenInformation().
3. Optionaly check if these child activities are Blocks or Actions. If Block drill further to get the Actions using getChildrenInformation().
4. Retreive the IGPActionInstance(s) from the Block Activities.
5. Get the IGPActivity object for these Actions using IGPActionInstance.getTemplate() method.
6. This object will have a method getTitle() which will retrive you the activity name.
Hope this helps.
Thanks
Kiran -
I need Id apple free i dont have a vise please i need your support for this issue
Dears
please i need your support to get a new apple ID for my account
and my country is lebanon i receive only by visa
best regards
<E-mail Edited by Host>All iTunes accounts are free to create, there are instructions on this page for how to create one (any content that you downloaded via your current account will remain tied to that account) : http://support.apple.com/kb/HT2731
If you want to create one without giving credit card details (if your visa card is a debit card then I don't think that it will be accepted) then follow the instructions on this page for creating it : http://support.apple.com/kb/HT2534 -
Need your guidance for format and mount the hard disk in linux
Hi All,
I presented 100GB in server (RHEL5.6) through SAN. Now I can able to see the hard disk,
Disk /dev/sda: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sda doesn't contain a valid partition table
Disk /dev/sdb: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdb doesn't contain a valid partition table
Disk /dev/sdc: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdc doesn't contain a valid partition table
Disk /dev/sdd: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdd doesn't contain a valid partition table
Disk /dev/sde: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sde doesn't contain a valid partition table
Disk /dev/sdf: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdf doesn't contain a valid partition table
Disk /dev/sdg: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdg doesn't contain a valid partition table
Now how to configure the multipath and how to use this allocated space.
Kindly guide me.
Thanks,
MuthuLinux DM multipath determines whether or not discovered devices are individual devices or whether they are separate paths to one and the same device. This is accomplished by querying the device serial number. To install and configure multipath, please see the DM Multipath Guide available for your OS version installed: https://linux.oracle.com/documentation/.
If you need more help and examples, check the following thread: multipath -ll command doesn't give any output
I'm afraid no one can answer your question how to partition and mount your storage space without you giving any information about its purpose. -
Need your suggestions for developing a Forum Site using Adobe Flex
Hi ,
I want to develop a small Forum Site where people can post questions and reply to questions .
I want to develop the whole thing using Adobe Flex , Is there any plugin avialable for this .
Means i mean to ask , if i go for normal J2EE there is a JForum avialable as far as i know .
Please share your ideas .I meant "Don't use flex" unless you have some superb new design for a forum. I suspect that if you already had such a design, you wouldn't need to ask the question. Flex for Flex sake isn't good.
There are already great html forum solutions out there.
Basically, there's no point in duplicating in Flex what is already done in HTML, unless the Flex version offers a significant improvement to the user experience in some way.
I am not aware of any Flex forum implementations and there is probably a good reason for that.
Maybe someone else will know of one. -
Need your help for ORA-01242 error
Hi,
Data base Relaease : 9.2.0.4.0
OS release: Suse linux 2.4.21-198-smp
Today morning i have faced one problem in my database. Today i tried to create statspack schema in my production environment from my login (my linux login is in DBA group)... so i just tried to create a tablespace. Once issued create tablespace command my production database gets down... after that i started my database (Database is started with out any problem....). In my alery log i have seen below entries
Thu Mar 29 11:08:31 2007
create tablespace stats
datafile '/sw01/oracle/oradata/cargainz/stat.dbf' size 100M
Thu Mar 29 11:08:49 2007
KCF: write/open error block=0x3 online=1
file=17 /sw01/oracle/oradata/cargainz/stat.dbf
error=27072 txt: 'Linux Error: 9: Bad file descriptor
Additional information: 2'
Thu Mar 29 11:08:49 2007
Errors in file /sw01/oracle/admin/cargainz/bdump/cargainz_dbw0_1292.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01114: IO error writing block to file 17 (block # 3)
ORA-01110: data file 17: '/sw01/oracle/oradata/cargainz/stat.dbf'
ORA-27072: skgfdisp: I/O error
Linux Error: 9: Bad file descriptor
Additional information: 2
DBW0: terminating instance due to error 1242
Thu Mar 29 11:08:49 2007
Errors in file /sw01/oracle/admin/cargainz/bdump/cargainz_ckpt_1296.trc:
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Thu Mar 29 11:08:49 2007
ORA-1242 signalled during: create tablespace stats
datafile '/sw01/oracle/ora...
Thu Mar 29 11:08:49 2007
Instance terminated by DBW0, pid = 1292
Thu Mar 29 11:08:54 2007
USER: terminating instance due to error 1092
Instance terminated by USER, pid = 24370
Thu Mar 29 11:10:14 2007
Starting ORACLE instance (normal)
=================================================
In cargainz_dbw0_1292.trc
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
ORACLE_HOME = /sw01/oracle/9.0.2
System name: Linux
Node name: ICM02006
Release: 2.4.21-198-smp
Version: #1 SMP Thu Mar 11 17:56:49 UTC 2004
Machine: i686
Instance name: cargainz
Redo thread mounted by this instance: 1
Oracle process number: 3
Unix process pid: 1292, image: oracle@ICM02006 (DBW0)
*** 2007-03-29 11:08:49.159
*** SESSION ID:(2.1) 2007-03-29 11:08:49.146
KCF: write/open error block=0x3 online=1
file=17 /sw01/oracle/oradata/cargainz/stat.dbf
error=27072 txt: 'Linux Error: 9: Bad file descriptor
Additional information: 2'
error 1242 detected in background process
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
ORA-01114: IO error writing block to file 17 (block # 3)
ORA-01110: data file 17: '/sw01/oracle/oradata/cargainz/stat.dbf'
ORA-27072: skgfdisp: I/O error
Linux Error: 9: Bad file descriptor
Additional information: 2
=====================================================
in cargainz_ckpt_1296.trc
/sw01/oracle/admin/cargainz/bdump/cargainz_ckpt_1296.trc
Oracle9i Enterprise Edition Release 9.2.0.4.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.4.0 - Production
ORACLE_HOME = /sw01/oracle/9.0.2
System name: Linux
Node name: ICM02006
Release: 2.4.21-198-smp
Version: #1 SMP Thu Mar 11 17:56:49 UTC 2004
Machine: i686
Instance name: cargainz
Redo thread mounted by this instance: 1
Oracle process number: 5
Unix process pid: 1296, image: oracle@ICM02006 (CKPT)
*** 2007-03-29 11:08:49.182
*** SESSION ID:(4.1) 2007-03-29 11:08:49.182
error 1242 detected in background process
ORA-01242: data file suffered media failure: database in NOARCHIVELOG mode
Can you please any one explain me the reason for this problem?.....
Regards,
KarthikYour database faced media failure.
Oracle says...
ORA-01242 data file suffered media failure: database in NOARCHIVELOG mode
Cause: The database is in NOARCHIVELOG mode and a database file was detected as inaccessible due to media failure.
Action: Restore accessibility to the file mentioned in the error stack and restart the instance.
Oracle was unable to write to the file and instance got terminated.
Is this your production database ? Your first step is to keep the database in archivelog mode. -
Need your experience for a trigger.
Hi everyone,
I am trying to pass the :new value of a column from a trigger to a procedure that I am calling within the trigger. I have tried to pass it as a variable (varchar2)after assign to it':new'| |column_name. I even try to do the same to a variable table.col%type. I tried different ways with the DBMS_SQL package, but all around I only get the string :new.column_name. If I could get that string to produce the value under it...
Any suggestion? I don't know what else to do ;(!!
Thanks.
nullThanks Rick,
Yes that code would work but not for what I need. Here is my code:
/*All variables have been globally defined on the Package declaration*/
create or replace trigger ATrigger after insert on
ATable for each row
begin
If INSERTING THEN
APackage.Log_Ins ('ATable);
For each_r in APackage.PK_Cursor(ATable)
Loop
/* nwVal pass the string :new.ID instead of the new value of the column ID; there is my problem*/
nwVal := ':new.'| |each_r.Column_Name;
colName : = each_r.Column_Name;
APackage.Log_Val (colName, nwVal);
End Loop;
End If;
end;
create or replace package body APackage AS
/*This cursor makes sure I get all the columns that are part of the Primary Key.*/
Cursor PK_Cursor (curTable varchar2)
RETURN User_Cons_Columns%RowType IS
Select *
from USER_CONS_COLUMNS
where TABLE_NAME = curTable and CONSTRAINT_NAME LIKE 'PK_%';
procedure Log_Ins (curTable in varchar2) is
begin
actualTable := LTRIM(RTRIM(currentTable, ''''), '''');
insert into LOG
values (ID.NEXTVAL,
SysDate,
User,
actualTable,
'INSERT');
procedure Log_Val (PKcol in varchar2,
newVal in varchar2) is
begin
insert into LOG_VALUES
values (ID.CURRVAL,
PKcol, -- PK column
NULL, -- old val of the
column for
delete,update
newVal);-- new value
end;
end APackage;
alter package APackage compile;
Any help would be greatly appreciated.
Thanks,
cip -
Plz need your help for this error code :1 (FBAPIErrorDomain)
After installed IOS7 i can not use Facebook application and i'm already remove the application and re install again but when i login found this message Sorry , an unexpected error occurred please try again lare , error code :1 (FBAPIErrorDomain)
Here is the solution. I like to play candy crush saga on my iPhone five. I cannot wait the allotted time frame to get extra lives. So what I have done is gone into the date and time settings of my phone and made the date in the future to speed up the process. All you have to do to fix this problem is to make the time and date on your phone or your iPad or your computer the correct time and date for today. The server certificates for most websites have expiration dates. How are machines are set up to revoke permission if you are trying to access the websites after the certificate expiration date. It's a real easy fix. Summary: make the time and date on your phone, computer, iPad today's date and current time, it should work after that.
-
SD Friends I need your inputs for below
Hi..
I need guidance related to below issues...request you to reply me at the earliest..
1)Fields in Customer master recoreds are not populating properly while taking printouts...
what camn be wrong in configuration/printer settings....it is basis settings or sd has to change some settings?
2)In generation of pro-forma invoice service material is not getting picked up? where shud be settings/improvments?
3)customers reference doc no is different from SAP Number ranges...can I maintain any PO settings in inquiry,quotation,sales order so that customer can get WHATEVER NO IS DESIRED TO GET?
4)CIN- Can J1id entries be made mandatory for customer/material with respect to sales order?How
5)My client want report which displays all billing documents which doent have any accounting documents/entries?is any report possible wrt ABAP?Any logic need to developed?
6)Pro-forma invoice shd not pick up the completed billing item values from sales order.....IS ANY setting exist in VTFA/Other cpy control for this....or do I need to develop any report with the help of ABAP for this?
7)Requirement is for a report which shows output with Item Code,Description,Qunatity,Unit,Cost Price,Raw material cost,shop cost & total cost...is such report possible to develope? what will I have to do that?
Request you to suggest me any guidelines/solution for above.......
(If not for all above ..for at least for those areas you have idea/expertise...)
Thanks
Manoj<b>1)Fields in Customer master recoreds are not populating properly while taking printouts...
what camn be wrong in configuration/printer settings....it is basis settings or sd has to change some settings?</b>
Give the appropriate requirement to Abaper to incorporate in SAP Script / Smart forms.
<b>2)In generation of pro-forma invoice service material is not getting picked up? where shud be settings/improvments?</b>
Give the appropriate requirement to Abaper to incorporate in SAP Script / Smart forms.
<b>3)customers reference doc no is different from SAP Number ranges...can I maintain any PO settings in inquiry,quotation,sales order so that customer can get WHATEVER NO IS DESIRED TO GET?</b>
No. Not Possible in Standard SAP.
<b>4)CIN- Can J1id entries be made mandatory for customer/material with respect to sales order?How</b>
Just check in Account Group setting, if you can make the required fields mandatory. The SAP IMG path is as under:
Financial Accounting (New)  Accounts Receivable and Accounts Payable  Customer Accounts  Master Data  Preparations for Creating Customer Master Data  Define Account Groups with Screen Layout (Customers)
<b>5)My client want report which displays all billing documents which doent have any accounting documents/entries?is any report possible wrt ABAP?Any logic need to developed?</b>
You will have give the logic to Abaper to check if the the billing document is released to accounting, then it should be excluded in 'Z' report & only include Those billing documents which are not released to accounts.
There is a standrad report also with Transaction Code: VFX3 Check if this servers the purpose.
<b>6)Pro-forma invoice shd not pick up the completed billing item values from sales order.....IS ANY setting exist in VTFA/Other cpy control for this....or do I need to develop any report with the help of ABAP for this?</b>
If you refer to Proforma Invoice WRT Order, it will pick by default all the items in sales Order. This is Standard SAP. I suppose that Abap development may also not be helpful, as what logic will you provide to select the required items.
<b>7)Requirement is for a report which shows output with Item Code,Description,Qunatity,Unit,Cost Price,Raw material cost,shop cost & total cost...is such report possible to develope? what will I have to do that?</b>
Abap Development.
Regards,
Rajesh Banka
Reward points if helpful. -
Hi Everyone,I need your help for Recovery as I face APPCRASH issue :(
Hi,
since I bought my laptop I noticed that no application of Cyberlink was working like DVD Suite or Power2go.But I did not pay attention to that.
But nowafter one and hal years when I want to refresh my laptop by using Recovery Manager and recovery Disc Creation, it is giving me same APPCRASH error as it has been giving for Power2go or DVD Suite.
F11 does not work as well it says something like drive is inaccessible or software/hardware issue...
Still my laptop is fine but a little heavy that s why I wanted to refresh it
No hardware or sofware changes were made ever.
Laptop specs. are:
HP Pavilion dv4i 2100, Notebook PC
Serial # {Removed for privacy}
Product # VN673AV
Warranty has been expired
At HP website regarding this issue they say to turn on wireless before Recovery but it does not work for me.
Please anyone HELP me out please.
waiting anxiously for any positive reply!!!
Kind Regards,
JawwadI did exactly as I described in my loaner Envy17-3002ea's Disk management. see the image
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
Hi friends need your help for the following !
How to populate an idoc type.
Is it only by writting a report program like
"master idoc distribute" or also by NACE.
When i am using NACE then i must have the baic idoc type cretaed with ALE configured ??Hi,
It is not always by using NACE. If ur making use of standard IDOC types Like
ORDERS05
MATMAS06
DEBMAS etc for the salesorder and purchase orders etc then u can go for the
T.codes : BD10 for MATMAS05,
BD12 for CREMAS06,
BD14 for DEBMAS04 for the MM01, VD01 and MK01/XK01 T.codes Respectively.
If u r dealing with NACE then u should know the basic idoc for which u r using NACE and Messgae type .
There u will cofigure and assign the OUTPUTYPE and assign those outputtype to the respective T.code.
Regards. -
Help, I need to search for duplicate photos in my external hard drive
Hi Mr. Toad and others who have been answering questions in these forums:
Thank you very much for all your help so far. I have been using a mac for the last few years and LOVE IT! I was wondering if I could pick your brain for a moment. I have backed up my iphoto library onto my external hard drive...a few times...once or twice before I really knew what I was doing. There are a couple of folders that I fear have duplicates and I wasn't diligent about naming pics after having a baby (and now I know the errors of my ways). Now I have lots of folders like 01, 02, 03, etc and within each, there are the different days of the month. So, my question to you is do you know of a program that can seek on my external hard drive and show me duplicates and ask me if I want to remove them? I am trying a program right now called DupeGuru, but it has been running for abot 6 hours already and is only 1/4 done!!! It isn't even showing me that it's found any dupes yet. I've looked at iphoto diet and duplicate annihilator and both seem to only work with iphoto.
I really need an application or workflow to search my iomega 80g usb drive. if you have any thoughts, I'd love to hear them. My brain hurts trying to figure all of this out. Thanks again for your help!!!
ibook G4 Mac OS X (10.4.8)well PhillyPhan, I can't tell that you're better looking just by your iphoto icon, now can I? Although it is a lovely sunset you've got there.
Thanks for your response to my question, I see your point and will do that, however, I have another folder that was created before I had a Mac, which has all sorts of lovely titles and labels and some of those pictures I brought over to my ibook when I first started. So there are some duplicates in my iphoto library that I already have backed up in that other folder. I guess I shouldn't really obsess about those. I guess I am just nervous about deleting all my prior iphoto library, but I should have faith that it will all be there in my pictures library. Just trying to clean up the virtual mess.
I'll hold my breath and take the plunge.
Thanks!
ibook G4 -
okay i want to go to smart phone with 2 year contract. i am wavoring between the 2g to 4g plan. verizon has decided not to chat with me for the moment. because i'm annoying. my question is, can i alter the G factor as i go if i need more need less and leave everything else the same?
you can start out low and increase your data allowance as you need throughout the month, backdating it to the beginning of the billing cycle so you don't have overages; however, I found out the hard way that you cannot decrease your data allowance during the month and backdate it so you don't overpay for unused data.
what I do now is reset my data allowance to 2GB at the beginning of every bill cycle and then increase it if I get warnings that I'm going to go over... and I check it 3 days before my bill cycle ends to see if I think I might need to bump it up before the end of the bill cycle
it's annoying, but otherwise I end up paying thru the nose for overages or overpaying for data I don't use
BTW, I'm on the More Everything plan, which is the same plan you'll get unless you go Edge (where you pay the full price for the phone but don't get the 2-year commitment to it)
Maybe you are looking for
-
Multiple users sharing one set of ARD preferences
I need to be able to have multiple users share a common set of ARD preferences which are stored in a central location. Is this possible with ARD? If so is there a difinitive description on how to do this? All users will be using MacOs 10.9.2 and ARD
-
I have an XSLT where I want to strip out the SOAP envelope and just have the body.I am using the following code: <?xml version="1.0" encoding="UTF-8"?> <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:a="urn:test.c
-
How can I found out the No. of Psocess running and How can I Release them
Dear experts, How can I found out the No. of Psocess running and How can I Release them. I have 1GB RAM with oracle 10G. and please tell me How many processes can run with this RAM.
-
The GP for Production order Rescheduling
Hi Folks I have finished executing the Production order Rescheduling scenario in the DS. Now I want to find out how the blocks, the actions and the callable objects of it has been arranged. I am logged in as username j2ee_admin. I cannot see folder f
-
Hello Guru, First time I have started Netwever in my server ecc6.0 in that I have done everything but one problem is coming that one I am not able to find out custom tool through that I can design the screen , when I double click