Need your guidance for format and mount the hard disk in linux
Hi All,
I presented 100GB in server (RHEL5.6) through SAN. Now I can able to see the hard disk,
Disk /dev/sda: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sda doesn't contain a valid partition table
Disk /dev/sdb: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdb doesn't contain a valid partition table
Disk /dev/sdc: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdc doesn't contain a valid partition table
Disk /dev/sdd: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdd doesn't contain a valid partition table
Disk /dev/sde: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sde doesn't contain a valid partition table
Disk /dev/sdf: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdf doesn't contain a valid partition table
Disk /dev/sdg: 107.3 GB, 107374182400 bytes
255 heads, 63 sectors/track, 13054 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/sdg doesn't contain a valid partition table
Now how to configure the multipath and how to use this allocated space.
Kindly guide me.
Thanks,
Muthu
Linux DM multipath determines whether or not discovered devices are individual devices or whether they are separate paths to one and the same device. This is accomplished by querying the device serial number. To install and configure multipath, please see the DM Multipath Guide available for your OS version installed: https://linux.oracle.com/documentation/.
If you need more help and examples, check the following thread: multipath -ll command doesn't give any output
I'm afraid no one can answer your question how to partition and mount your storage space without you giving any information about its purpose.
Similar Messages
-
How do I format and mount a hard drive?
I was successfully using Time Machine to back up my MacBook Pro to an iomega USB portable hard drive. I was doing it the low-tech way by simply plugging the HD into the USB port of my laptop and letting Time Machine run to its heart content. Then I decided to get smart, or dumb. I plugged the HD into a Netgear Router thinking I could use the wireless network to access the iomega for Time Machine backups. That didn't work as well as I expected so I tried to revert back to the old low tech system of plugging the HD into the USB port. Unfortunately, now the disk won't mount and all efforts using disk utility to verify and repair the disk have failed. How do I get back to where I was? Or, have I messed this up to the point where I shoud just buy a new HD at the Apple Store and start from scratch?
Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
The drive should now be properly partitioned and formatted for the Mac. You can now use it as you wish.
Note that you cannot us Time Machine to backup to an external drive connected to a router unless it's an 802.11ac AEBS model. Prior to that model Time Machine was not reliable when used to backup to a drive connected to the AEBS even though it seems to work. You could consider replacing the Netgear Router with a Time Capsule. -
I have hp 2000-299 wm notebook that failed the hard disk test. what can be done?
Message said: " SMART hard disk error. The SMART hard disk check has detected an immintent failure. To ensure not data loss, please back up the content immediately and run the Hard Disk Test in system diagnostics. Hard Disk 1 (301) F2 System Diagnostics ENTER-continue setup."
I ran the Hard Disk Test and the following message appeared:
"Testing Drive 1
SMART check: passed
Short DST: passed
Long DST: FAILED
Failure ID: UAGF7T-5SP669- MFKR4K-618MO3
Product ID: QE282UA# ABA
Hard disk 1
Hard Disk Test : FAILED
for more info... go to this websiteYour notebook hard drive has failed, you need to get it replaced to fix your notebook.
If covered under Warranty, you may contact the HP Tech Support and have them ship you a replacement drive, or else you may purchase a new one.
If you would like to purchase a new Hard Drive, any of the below will work.
500-GB, 5400-rpm Part Number: 634932-001
320-GB, 5400-rpm Part Number: 622643-001(the one shipped with the notebook)
250-GB, 5400-rpm Part Number: 622641-001
You can contact the HP Support Team(Phone, chat, email) from the below link:
http://h10025.www1.hp.com/ewfrf/wc/contacthp?cc=us&dlc=en&lc=en&product=5166284 -
Is it the Hard Disk?Or something more serious?
Recently I have had several problems with my Mini (1.47 super drive with 512mb.) It started with very very slow response time and then would sit at the start up screen for a very long time before booting up.. and then hang up on various apps for a very long time. I started by cheching the HD for errors and was getting Leaf error and other errors. I can usually get this to repair - and the mac will boot a little better but after 30 or so minutes of use.. it starts all over again. iTunes and the iPod Video no longer will Sync and agaim the hard disk needs repaired.
I installed a system on an external firewire drive to test a theory and that seemed to fix the problem for about 2 weeks.. then the problem started with it and now that drive will not repair with anything I have - Disk Warrior and of course Disk Utility. (do not have Tech Tool Pro)
Does this sound like the HD simple needs to be replaced? If so - what help is there on doing that? I have been in there before when the Super Drive stopped working and it turned out to be a simple fix and off I went with no problems for almost a year. Now this issue has arrisen. Any advice or things to try I am open to. When I boot from DVD - it comes right up - that is why I am curious if it is the HD vs mother board or ram or something else.
Thank you in advance for any help!!With the disk utility it says the SMART status is verified. Disk utlity after repair will still say that the disk it o.k. but it still will not boot.... sits in the apple window and does not go further. Everything works well with the DVD installed (after as booting and working around and does not seem to take to long.) I did bring over my iTunes files and photos.. but everything else is a clean install. I even did the 30+ drive clean before installing. Now the Firewire drive is also having issues.. and says that Disk Utlity can not repair the drive.
I thought I read somewhere that external drives are not a good idea for running the system from so I assumed that was what caused the issue witht he bad drive. Would that still be the case? How do I check the RAM with the install disk through utilities? I am afraid I have never done that before in all my years of working with MACS. It does show up in the system info as a 512 MB RAM.....
Thank you for you advice - and I really appreciate you trying to help me out with this.. I have all about given up. I am actually using a PC right now. YUCK!!!! MY Fingers are burning!! -
Mountain Lion has broke the hard disk
I have a Macbook Pro 13' (Mid 2010) with LION which has always worked very properly.
-Wednesday 25th
On Wednesday 25th I've bought (16€) and instald Mac OS X Mountain Lion. The laptop seems too slow for me but I didn't mind at that moment, before going to sleep I shutted down the macbook pro.
-Thursday 26th
The next day, when I tried to turn on, it stayed at the white screen with the apple and thinking. I tried it for several times, and at one of them after 10 minutes the os started but it worked incredibly slow (It was imposible to shut down it normaly). I called to apple care, they told me to enter in recovery mode and verify the disk. I do it and all was ok. I restarted and as before the mac didn't started or at least started and worked very slow.
-Friday 27th
I tried to turn on the laptop with the recovery mode, but I had no response of the macbook pro,it stayed with the white screen. I called again to apple care and after some times I could enter to the recovery mode, but this time the were important errors at verifing the disk and it was impossible to fix it.
So I went to apple premium reseller near to my home. They found all the hardware ok with their test but they told me to open the laptop and change the hard disk (paying 200€) to solve the problem. I sayed thank you very much and I took a quote at the Genius Bar in the Apple Store for the afternoon. They found all the hardware ok again but they weren't able to fix the problem by this moment. So they told my to leave the computer and they would reinstall mountain lion from 0, without any cost.
After 3 hours I've recevied a call from the Apple Store telling my that the hard disk was broken and I've to pay for a new one (150€).
They are not taking into account that the laptop was ok and by installing the new OS and making all the test and restarts that they told me to do are the cause of hard disk's rupture.
What can I do? What do you recomend to me?
Thank you very much.
P.S. : I've always loved my Macbook Pro and I haven't had any problem with it or with Apple, all have worked perfect until this moment and know I feel helpless.I have a Macbook Pro 13' (Mid 2010) with LION which has always worked very properly.
-Wednesday 25th
On Wednesday 25th I've bought (16€) and instald Mac OS X Mountain Lion. The laptop seems too slow for me but I didn't mind at that moment, before going to sleep I shutted down the macbook pro.
-Thursday 26th
The next day, when I tried to turn on, it stayed at the white screen with the apple and thinking. I tried it for several times, and at one of them after 10 minutes the os started but it worked incredibly slow (It was imposible to shut down it normaly). I called to apple care, they told me to enter in recovery mode and verify the disk. I do it and all was ok. I restarted and as before the mac didn't started or at least started and worked very slow.
-Friday 27th
I tried to turn on the laptop with the recovery mode, but I had no response of the macbook pro,it stayed with the white screen. I called again to apple care and after some times I could enter to the recovery mode, but this time the were important errors at verifing the disk and it was impossible to fix it.
So I went to apple premium reseller near to my home. They found all the hardware ok with their test but they told me to open the laptop and change the hard disk (paying 200€) to solve the problem. I sayed thank you very much and I took a quote at the Genius Bar in the Apple Store for the afternoon. They found all the hardware ok again but they weren't able to fix the problem by this moment. So they told my to leave the computer and they would reinstall mountain lion from 0, without any cost.
After 3 hours I've recevied a call from the Apple Store telling my that the hard disk was broken and I've to pay for a new one (150€).
They are not taking into account that the laptop was ok and by installing the new OS and making all the test and restarts that they told me to do are the cause of hard disk's rupture.
What can I do? What do you recomend to me?
Thank you very much.
P.S. : I've always loved my Macbook Pro and I haven't had any problem with it or with Apple, all have worked perfect until this moment and know I feel helpless. -
HI ALL SINCE TWO DAYS I AM DOWNLOADING VIBER BUT I AM NOT HAVING MY ACCESS CODE AND EVERY TIME I DELETE THE APPLICATION AND DOWNLOADING IT AGAIN BUT ALWAYS THE SAME RESULT PLEASE I NEED YOUR HELP FOR THE ACCESS CODE.MY PHONE NUMBER IS 0022996969896.THANKS IN ADVANCE
try this website this should help you http://helpme.viber.com/index.php?/Knowledgebase/List/Index/1/iphone
-
Hi All,
I am configuring RSS Viewer webpart to SP 2013.
But i am getting an error "An unexpected error occurred processing your request. Check the logs for details and correct the problem."
I looked for solution of this error. i got to know, we need to set proxy server in web.config file.
So, in order to resolve this i put the following set of code in web.config and save the file
<system.net>
<defaultProxy>
<proxy usesystemdefault="True" proxyaddress="http://myproxyserver" bypassonlocal="True" />
</defaultProxy>
</system.net>
But, still i am getting the error.
What could be the problem now.
Any help is much appreciated.
Thanks,
RakeshHi Rakesh,
According to your description, my understanding is that you got an error when you used RSS viewer web part in SharePoint 2013.
The RSS viewer web part uses authentication delegation and is using the current user's credentials to access the proxy. However, the RSS viewer only supports anonymous and Kerberos authentication. So if you are using NTLM authentication, the RSS viewer will
not be able to authenticate the user through the proxy. More information, please refer to the link:
http://kalsing.blogspot.com/2007/11/troubleshooting-rss-viewer-web-part.html
Also see:
http://blogs.technet.com/b/sharepointdse/archive/2007/04/13/fun-with-rss.aspx
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
When I try to connect to a WiFi network that I need a screen pops up and says "The network you're attempting to join requires you to install a profile on your Apple TV." What does this mean?
Yes, home sharing requires both to be on the same wifi network. As it stands access to the network requires the login via webpage, which cannot be done on Apple TV. You will need to speak to IT in order to grant access for the device.
-
when i watch videos on my iphone 5 my wifi buffers the video and then halfway through it just stops and all wifi stops working on my device. i need to switch back off and on the wifi then it works but the same thing happens every time for videos. NOT A ROUTER PROBLEM. all my other apple devices dont have this problem
iOS: Importing personal photos and videos from iOS devices to your computer
iOS: Unable to import photos or device not recognized as a camera -
Dear Gents ,
till now i can't reset my security questions and i forget the answers please do something for me and find the below as per your request .
note : i can't purchase any thing also , thanks in advance.
BR
i sent my issue to you under this subject :
RE: Please verify that we have the right address for you
my email in [email protected]Copied from the link provided.
Note: The option to send an email to reset your security questions and answers will not be available if a rescue email address is not provided. You will need to contact iTunes Store support in order to do so. -
I need to show grouped id and only the max order value for each unique id
select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select #Temp1.id, max(#Temp1.[OrderOfVisit]), #Temp1.VisitNote
from #Temp1
group by #Temp1.id, #Temp1.OrderOfVisit, #Temp1.[VisitNote]
ORDER BY #Temp1.id
drop table #Temp1
---I need to show grouped id and only the max OrderOfVisit for each unique id, and the VisitNote for each OrderOfVisit
----------------need help-------------Sounds like this
select distinct
Table1.id,
Table1.id +' - '+ Table1.VisitNumber +' : '+ Table1.Priority as UidVisitKey,
Table1.VisitNumber,
DATEDIFF(d, [dob],[Visite_dte])/365.25 as Age_On_Visit,
Table1.Priority,
Table1.OrderOfVisit,
Table1.OrderOfVisit + ' - ' + Table1.Notes AS VisitNote,
Table1.Visitor_FName,
Table1.Visitor_SName,
Table2.dob,
Table2.sex,
Table1.Visit_dte,
into #Temp1
FROM Table1 INNER JOIN
Table2 ON Table1.id = Table2.id
WHERE Table1.LeaveDate IS NOT NULL
and Table1.LeaveDate between DATEADD(mm,-1,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0))
and DATEADD(ms,-3,DATEADD(mm,0,DATEADD(mm,DATEDIFF(mm,0,GETDATE()),0)))
select id,OrderOfVisit,VisitNote
from
select #Temp1.id, #Temp1.[OrderOfVisit], #Temp1.VisitNote,ROW_NUMBER() OVER (PARTITION BY #Temp1.id ORDER BY #Temp1.[OrderOfVisit] DESC) AS Seq
from #Temp1
)t
WHERE Seq = 1
ORDER BY id
drop table #Temp1
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
I need a help from you. All my movies are in 4:3 scale.
I use always the same Easy SepUp in Final Cut. My movies is compressed as DV NTSC in 4:3 format.
I need to finalize a dvd, and when the movie enters in iDVD, the preview appears already written in green "widescreen preview", and so the finallized dvd goes to 16:9 format.
I checked in Idvd, and the size is choosed to 4:3.
Interestingly, I've used iDVD several times, including by using templatesmade to 16:9, and changing the format to 4:3 it always worked well.
Maybe is an Idvd update that causes it?Sorry,I know this is a month late, but I think I remember this happening to myself some time ago. As I can best recall, I believe I had used an MP3 music file in my project (exported from FCP 7) and that was the cause in some strange way. I remember deleting a file (again, I believe the mp3 file) and then it worked fine as 4:3.Not positive, but I hope this helps.
-
trying to sell my ipad2 and i cant delete all the data as i need a password for icloud and i dont know what it is and i didnt know i had i cloud account what do i do ?
Settings-general -reset-erase all content and settings.
iCloud ID and password should be same as Apple ID. -
your rite its mistek and iam learn
iam learning the lesson but you guys sholuld take them of action this kind of people who tourist come your contry for visit and they Cheating and stolen mooney like this sale fake stufffff is this **** all ......we are 10000 time better then you then bcz if we sale and we give all proff must you help us ....
thankshi,,,,
yes its my mistek by second hand phone and now this stupid man not answer my call and my messages iam back now dubai iam never think this us people cheating me ...and this man give me him id and paper on rite i have all APPLE people also not ready to help me i dont no what should i do its mean We united arab emirates people goood 100000000000000 % time honest and good bcz we never cheated like this ......i send him messages pleas send login password but he cant also i send email ples apple people if they want him id or copy of college and paper as he write sale to me but they said you learn what i learn if i buy second and myu mistek .....plea spleas apple people i request you help me to remove my phone this man icloud id and password pleas iam not offerd ...
Thansk iphone 5 -
After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?" I've reformatted in Disk Utilities...not sure what I did wrong. Any help would be appreciated.
Not sure what you mean by "booted" from it.
If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again.
Maybe you are looking for
-
Problem with K9N Ultra and Windows 7!!
Hello, I have the following system: - K9N Ultra (MS7250 - Version:2.0) - AMD Athlon 64 3500+ - 4x Kingston KVR533D2N4/512 - NVIDIA GForce 7300GS - Seagate Baracuda: ST3120827AS (7200rpm) - NEC DVDRW ND4571A I am running Windows XP SP3 but when I try
-
HT1751 i can't open itunes. how can i back up my library? i need file MSVCR80.dll
i can't open itunes. says i need file MSVCR80.dll. then to get that file apple recomends uninstalling itunes and reinstalling itunes. i'd like to back up my library before i uninstall but i can't open it to backup without that file. help. please and
-
How to fill the "budget" in an initiative in SEM BSC
Good Afternoon for all! We have a Balanced Scorecard implemented in SAP SEM BSC, using SAP BW. Our Balanced Scorecard actually manages ratios, objectives, perspectives, strategy and scorecard. Now, we are trying to use "iniatiatives" and we have usin
-
There are a few web sites that for some reason the menu to save username and password did not come up. Is there a way I can save these setting for certain websites? Thanks
-
Need Help! every single time i start muse the program crashes. when i use a project to open up muse, it shows this warning: