Need your help I am color blind and need help ASAP

I am color blind and need help with this issue. I have the 8520 and t-mobile service. I went to the accessibility wizard and chose the reverse color mode. That is black background with white font. Here starts the problem when you select this option it changes your photos into negatives and also changes the home screen to bright gray . I can not see these colors. What I need is almost like looking at old DOS font Black backgrounds with white or yellow fonts. I have been trying to find a theme but no luck.
The option of reverse contrast would be great if it did not flip photos or the home screen.
Can someone please help me
I would be happy to talk to you in detail to better explain the problem.
Thanks in advance
TJ
I posted t this message in the wrong area before. I hope this is the correct area.
Mods please remove the message posted in the 8300 series area thanks TJ

Just a follow up on this matter. I spent most of the day and a few hours at work on  this problem.
I called T-mobile and was transfered to Blackberry support within T-mobile then to Blackberry RIM . They asked the same questions as everyone else said how much they wanted to help. After about an hour they gave up. They could find no apps or themes that are basic black with white font. The tech could not explain why the designers fell short with reverse contrast . I ask this question why would a programmer or anyone want to see all photos in negative media. I spoke with a local news station about this whole matter and they said give the store one more attempt to make it right. T-mobile said they would sell me another phone at a discount but would not take the Blackberry back because I was out of my7 14 day window. note I have been trying to fix this with T-mobile starting 12/04/09 when I bought the phone. So buyer beware....
Back to the matter. a very simple fix could be done by BLACKBERRY  make a theme for the 8520 that is black background white font in all areas. Leave the internet as normal ie: browser let photos look like they should and sell the theme or app like everyone else.
To be honest if I knew how to do it I would build it myself and give it away for free people need this type of theme.
Thanks for reading my rant everyone.
TJ
colorblindguy

Similar Messages

  • Why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

    why can't i connect to my iphone after updating to 7.1.1? i don't even get the screen that lets me login into my apple account??? plz help my phone was stolen and through help of the police i recovered it and now i can't access my phone

    You must have had find my iPhone on, or it was locked by your phone carrier.
    Call your our cell carrier first.
    then log on to a computer to iCloud to erase your iPhone.  
    NOW... You will be able to setup with a backup.

  • Help if you can, student and need phone now.

    Hi, yesterday morning when I unplugged my phone from the wall charger I noticed there were too small black oval shapes on the top center of my screen. Being late for school I didn't really mind it.. Through out the day do, it's as if it extended to my right side of the screen and to my left. There are still two black oval circles on the top, now one side of the screen flips from different colors and lines and the other flips from white to black. I can't see anything!!
    How can i fix this? Will blackberry cover me for this? I run my hand over the screen and I can't feel any scratches or bumps or marks. I dropped it once the first time I got it, but it was less than a foot, and nothing happened to it. I'm with telus and in canada.. Any and all help is appreciated.
    Thank you. 

    Perhaps i was not really good with my language.
    I don't speak english as an english.
    I m' french and i don't know why you send me to this
    adresse!
    My question was not a joke. It just concerned image
    manipulation.
    I was just looking for a programm with a threshold
    exemple.(i found it!)
    Sorry not to be understood.The poster cknelsen was telling you that your subject line "Need help if you can." is not going to draw the attention of people who may be able to answer your questions. It does not tell the viewer anything. Only someone who is curious and has time on his hands will look at your question.
    Your initial post did not really describe the problem and your question. You don't provide the reader with specifics.
    I am explaining what I think cknelsen meant because we probably is trying to be helpful but the language barrier is getting in the way.
    I suggest you read the link. Be more specific in telling the reader what you need help with. Repost your question with a subject like "Need help with modifications to a BufferedImage object".
    Good luck

  • Finished my composition but it's too big, I need to scale to a fixed height and width - help?

    Hi everyone,
    This is quite urgent - I've finished my project in Edge Animate, but it is too large and needs to be scaled down. I tried to place it in a separate DIV element in the HTML and scale it down with the CSS but this doesn't work.
    I want to scale it from the 1024px wide it currently is down to a fixed width of 800px. Can anyone help me do this? All of the tutorials I have found are to do with making the composition responsive to the user resizing the browser, and this isn't what I need at the moment.
    Any help would be greatly appreciated! Thanks!

    Can you explain a bit further what you need this for? Are you just trying to center the Stage on your page?
    Asking because when writing out this script I ran into some weird browser issues setting the transform origin to the center (IE and FF IIRC). You can give it a shot though by changing the transform origin in the code to:
    “transform-origin”:”50% 0″, (for all prefixed instances)
    Not guaranteeing results, but you can try
    Sarah

  • Help! I know nothing and need to get my info from my Curve onto my Pre

    Ok first off I know nothing so please don't use any techincal terms or assume that I know what an OS something is because I promise I don't.  What I need is to simplely get the info off my Blackberry Desktop Manager onto my new Palm Pre.  I've been at it for days and trying to decipher all the lingo on here and I guess I'm not smarter than a 5th grader because I can't figure it out.
    What I need to know is step by step instructions.  Don't tell me I can save 19.99 if I do certain steps myself because I really just want the easy way out.  Please people have pity on me - I can't even figure out my kids PS3.
    So I don't have anything important in Outlook or any other program than my Blackberry Desktop Manager.  I appreciate any help from those willing to help my lost self.  Thanks a bunch!

    In order to transfer your data to the PRE you will need to have your data in Outlook. Once you have your data in Outlook, you can use the Palm Data Transfer Assistant to transfer your data to the PRE.
    Here is an article on how to setup your Blackberry to sync with Outlook. If you have trouble with this, you will need to call Blackberry support for assistance.
    http://www.ehow.com/how_4502616_sync-outlook-blackberry-via-usb.html
    Once you have the data in Outlook, you can call Palm for setup assistance at the following number, 1-866-750-PALM.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/pre/p100eww/sprint/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • Help! Intalled i tunes and need help with syncing

    I have successfully installed iTunes on my compaq cpu (windows xp) and have purchased a couple of audio books. However, when I plug in my Sony MP3 playing to my CPU via the USB cord. My MP3 player icon does not show up on my items tool bar so I am unable to sync it. How do I create the connection between my MP3 player and itunes?
    Hope I am making sense! any help would be appreciated..
    FP

    iTunes for Windows is only compatible with the iPod/iPhone range and the iTunes enabled phones from Motorola. You may be able to get your player working with the aid of a third party helper program. Have a look at this one and see what you think: iTunes Agent -Windows
    If your player supports drag and drop through Windows Explorer you can drag tracks from the iTunes Music folder rather than through the iTunes interface. Also remember that many players will not work with AAC (MP4) format at present so if you imported anything from CD into iTunes using the AAc encoder then they will need to be converted to MP3: How to convert a song to a different format

  • Help! Having Serious Issues and need to save my data!!!

    This is probably going to be a long post, and I apologie in advance, but before I give up completely, I need to see if there's anything that I can do to save the data on my computer. Also, I'm writing this from work and don't have access to the system right now, so I'm going to have to rely on my questionable memory to relay the situation.
    Since the battery update was installed, I was having intermittent issues with my MBP battery - when I was fully charged, it only showed about 1:45 of time left (down from a usual 3:00 or so). When it would get down to about 50 minutes left, the system would shut off with no warning. I was about to take the system into the Apple Store to get the battery replaced last week, but just to make sure, I followed the instructions to reset the battery and after that was done, it seemed like the battery was fine (showed up as about 3:00 fully charged). But... the system started working very slowly.
    As a result, I decided to try to back up the system (I use SuperDuper and backup to an external USB drive). The backup failed mid-stream and my backup file was now useless (that's the last time I use the erase before backing up option). So now I don't have a backup of my data (all of my data is on that laptop).
    I tried running Disk Utility, by booting from the installation DVD, to Repair the disk and it stopped with an invalid node error. I tried again, but no joy. A third time, it appears to have completed. However, now when I boot the system, not only is it really slow, but it boots into some unfamiliar linux prompt ("I don't have a name#:", or something like that.
    Since I still think that there was a file system problem, I bought a copy of DiskWarrior 4. However, I don't want to wait for the bootable CD, so I tried to install the OS on the external USB drive so I could run it from there. Everytime I tried to install to the USB drive, I got a kernel panic when the IT Tunes install script was loaded. Every time. I tried removing the second (add-on) RAM stick, removing the battery, etc. No joy. Finally on about the 10th attempt, this time on battery power only (no power cable connected), I managed to get the OS to install on the USB drive.
    Okay, so now I can boot to the USB drive. I installed Disk Warrior 4 and ran it on the internal hard drive. Kernel Panic. Every time I've run it (error is about unlocking mutex). Even more frustrated now, I tried to backup the disk again (since all my data is on there, I can't afford to lose any of it). No joy. The backup (using SuperDuper or CloneCopyX) fails at various spots. I have some folders on the drive that I tried to copy off (about 7GB) that contain disk images and the like. That copy failed.
    So now, I have un-backupable (is that a word) hard drive that I can't repair without kernel panics (although, now as I write this, I didn't try DW without the power cord). And what I need to know is if anyone can think of anything that I haven't tried to save my user data off of the system before I have to take it in to the Apple Store and potentially lose everything that's on it.
    My number 1 concern right now is losing the data on the drive.
    Can anyone help me at all?
    Again, sorry for the long post...
    Thanks!
    Jim
    17" MacBookPro   Mac OS X (10.4.9)   2GB RAM, 120GB HD, Glossy Screen

    You may not have the luxury of having another Mac but you must know someone who does. You need to boot your Mac into target disk mode. This is going to be your best bet as far as saving your files. Keep in mind that everytime you mess with this computer you are further endangering your data. Also, once your Mac is booted as a target disk, it may be possible to mount it on a windoze computer just to copy your files to another drive. I used to have one here and if i still did I would try this for you but I "offed" it in favor on running windoze (Parallels) on my MBP. But, one way or another, you need to get next to another computer.

  • Help i locked a device and need to unlock it

    Help My boyfriends I mac pro was on my I phone 5 under devices I erased it can I unlock it?

    Could you please explain... you erased your iPhone 5 when syncing to your iMac?
    If this is the case and you erased it, you will need to restore the device provided you have a recent backup. See this help article for more information about restoring a device: http://support.apple.com/kb/ht1766

  • Blue screen error /Blue screen of death(Your pc ran into a problem and needs to be restart)

    Hello, 
            About 15 days ago,my laptop is showing blue screen errors,really this is very frustrating.
             I use a lenovo laptop,
    Processor
    Core i3 (3rd Generation)
    System Memory
    4 GB DDR3
    HDD Capacity
    320 GB
    Operating System
    Windows 8
    System Architecture
    64-bit
    Dedicated Graphics Memory Type
    DDR3
    Dedicated Graphics Memory Capacity
    1 GB
    Graphic Processor
    NVIDIA GeForce 610M
    i have tried methods like , 1) un installing the anti virus (Quick Heal Total Security) and re installing again
                                              2)Turning Firewall on and off. Because someon said that this could be a cause of Anti virus..
                                              3)Optiminzing the disk drives...
                                              4)i have used a software called "Blue screen view".which shows all the daetails of blue screen errors
    and all dumps files.And also i deleted all the dump files and folder , but also the problem persists.
                                             5)in Google search someone told that to update all the drivers. i have also done that
                                             6)i have uninstalled and reinstalled the graphics driver.
      So, i have tried all the methods given online,but i didnt get any help from it.
    So please help me . I am tired of all this 
    *Sorry for poor english

    Without the Minidump Files to help us isolate the cause of the errors you are experiencing there is no way to provide assistance specific to your situation.
    One of the most common causes of errors are drivers. You have already mentioned that you have upgraded your graphics driver to the latest version provided by the manufacturer, updating other drivers like network, chipset, and storage controllers is a good
    next step. If no driver updates resolve your issue and you have already looked into security software as a possible cause, another direction to take would be to review your hardware for possible failures. You can diagnose your memory by
    entering “Diagnose your computer’s memory problems” at the start screen and selecting the result. You can also diagnose your storage devices by
    right clicking the storage device in File Explorer, selecting properties, and selecting Error Checking.
    Brandon
    Windows Outreach Team- IT Pro
    The Springboard Series on TechNet

  • Help Am New To Apples And Need HELP With Wireless Conenction Imac Mini

    Hi
    First time here, i think i am running myself in circles here reading hundreds od different threads and pdf's.
    What i want to do is share my broadband connection with the Imac intel dual core (Wifes), My PC and an XBOX 360. Have the pc and the xbox already connected to the router which is a belkin wirelss pre-n router. the Pc is connected by cable to back of router port 1, the xbox 360 is wireless to the router.
    What i want to know is do i need to get anything else for the imac to connect it to the router as it says it has airport extreme wireless networking.
    My way of looking at it is that i neeed nothing else and it should just see a wirelless network from the router and connect to that, is that right?
    If i am way off do i need something else to plug into the router to make the apple go wireless.
    I haven't trierd it yet as we only just got it (the mac) and like to be in charge of all the facts first before setting networks up
    MAny thanks for looking and thanks in advance of any help

    My way of looking at it is that i neeed nothing else
    and it should just see a wirelless network from the
    router and connect to that, is that right?
    Yes.

  • How can I change the color in a search window for visited sites? I'm partially color blind and the default colors are very difficult to tell from one another.

    When I'm looking at a search engine results page, I would like the colors of visited results to be a color that is much more different than they are now. Like blue v.s. black or blue v.s. yellow.

    You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages, including the visit color.
    *NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

  • HELP :( Unable to repair HD and needs to know a way to back up using disk utility via boot up.

    I currently require assistance as I was thinking about sending my Macbook to the repair centre tomorrow but I decided to apporach here first before I send it over.
    Anyway, my Macbook suddenly hanged one day and I switched it off. When I switched it on , it gave me an icon file with a ? in the centre icon. I do not have the CD for the OS or anything. I am currently assessing safari via command + R when I booted up my computer. I tried to repair my Macintosh HD but it failed and I am afraid of losing my data when I send it over to the repair centre. How do I back up my HD when it's corrupted? Please also tell me how to restore my data when I receive it from the repair centre (most likely scenario) as well! If you know how to fix this problem as well without losing my data (and no CD) as well , I would really appreciate it!

    Sorry to say this but it is a little late now to start thinking about backing up your files. Should of done that all along for just this type of situation.
    About the only thing you can do now is connect an external drive and use the Command + r boot system to install a copy of OS X on the external. then once that is done try to access the internal drive and copy your files over to the external

  • Need help badly! In Africa and need to know...

    if I can update, change or add to my iWeb from my laptop if I built the site on my home system. I'm shooting a documentary on my in-laws that are adopting two children from Africa. We just landed in Addis Ababa and I would like to continue the "blogg" page on my iWeb site (www.themarkjacobs.com). I have copied the site folder from my iDisk and have tried every combination and nothing seems to work. Can I edit, update, change or add via my mac book pro while on the road??? Someone help! The last thing I want to do is rebuild my site from Africa.
    Thanks in advance!

    You are out of luck unless you brought a copy of the Domain file with you, or can get one sent to you.
    http://alyeska.altervista.org/en/iWebTwocomputers.html

  • Help - had to rebuild computer and need help w/ song transfer

    OK, so my computer had to be entirely rebuilt. Everything was wiped clean. I did back up all of my iTunes music files (had to reinstall iTunes though), and I still have all of the songs on my iPod. My question is this: what is the best way to resynn my ipod with my computer? If I connect my iPod to iTunes, will everything transfer from my iPod to iTunes (i.e. will iPod overwrite iTunes)? Just looking for the easiest way to do this - thanks!

    Open iTunes and select edit/preferences/advanced/general. Put a check mark in the box marked "copy files to iTunes music folder when adding to library" and also "keep iTunes music folder organized", then click 'ok'.
    Connect the iPod whilst holding down the shift/ctrl keys to prevent any auto sync, and if you see the dialogue window asking if you want to sync to this itunes library, click 'no'.
    Then go to file/add folder, open 'my computer', select your iPod and click 'ok'.
    The music files should transfer to your iTunes.
    However it appears that no playlists or any other info such as ratings/last played etc will transfer.
    If this is important to you, you may want to use other options.
    There's Yamipod. This is a free program that transfers music and playlists etc from iPod to iTunes.

  • Your Office database index is missing and needs to be rebuilt.

    I got this after recent security update.  I go to rebuild but nothing happens.  I do not have time machine.
    I have a macbook

    Support - Office.com

Maybe you are looking for

  • Problem in WIP

    Hai Friends, I have a doubt regarding WIP in SAP. When i view the open items in WIP stock account in General Ledger (FBL3N), i get a list of orders that are still in WIP. In these orders there are certain items shown as WIP for which the Technical Co

  • Stock lying in Quality from LQUA

    Hi All,    How  do  i determine the  Stock lying in Quality/Returns/Blocked from LQUA  ....? I mean among  the below set of fields  which can give me Q- stock , Blocked , return stock etc (for WM) LQUA-BESTQ  = space   available stock Q     Stock in

  • How to get structure from Idoc using function module?

    Hi all, I am looking for a function module in order to get the structure of a message type used for iDoc. The aim is to get the data element from the different fields in order to check authority if the data element is BUKRS. Thanks for your help! Dav

  • HT2497 secure connection for software updates

    Several days ago, I began to do a software update to see if there are any updates for the OS.  I have done this many times over many years.  When I began an OS software update several days ago, I got a mesage that said, more or less, that a secure co

  • BAPI or IDOC to upload quality info record transaction QI01

    Hi, If any one knows any BAPI or IDOC to upload quality info record do let me know. regards Ranveer