Need your help plz with new HD 250 gb

Ok I went to fry's and picked up a nice 250 gig Maxtor HD. So I was setting up the drive I used the maxblaster tool to format the new driver and partition it in to 2 125 then we used the tool to copy the old info on my HD c driver on to the new HD. everything went well till we shut down the system and switch out the cables and set the new HD to master and took out the old HD. On boot up it went to the Win xp blue screen where the icons with your names should be but there were no icons I could use the mouse but that was it. The icon never came on with do I need to do to get this 250 HD to work? I read on the installation guide that xp and win 2000 cant see HD larger than 137 GB Im using win xp pro with sp1 is there something Im missing? Im using the MSI KT3 Ultra ARU
and the Newest bios with Win xp pro with sp1

Hello,
If you use only 1 partition and re install from the XP CD to the new 250GB hard drive, does it work?
http://www.seagate.com/support/kb/disc/capacity/137/os/winxp.html
Yes you do require SP1 to be able to use over 137GB.
That would mean it must be integrated to the XP CD.
Does your winXP cd have sp1 integrated to it?
If not then you must integrate SP2 to it.
http://www.microsoft.com/downloads/details.aspx?FamilyId=049C9DBE-3B8E-4F30-8245-9E368D3CDB5A&displaylang=en
How to integrate/slipstream
http://www.winsupersite.com/showcase/windowsxp_sp2_slipstream.asp

Similar Messages

Hello..i have IPhone 4S i did reset to factory settings by fault and till now after a 2 hours there is nothing just a waiting icon in the middle of the screen and none of home or turn off button are response so i do need your help plz

hello..i have IPhone 4S i did reset to factory settings by fault and till now after a 2 hours waiting (as known it takes a 1 to 2 minutes maximum) there is nothing just a blank screen and a running waiting icon in the middle of the screen and none of home or turn off button are responsed so i do need your help plz & thanks in advance..

Try to reset it by holding the power an home buttons at the same time until you see the Apple logo, then release. If it won't reset, you'll probably have to force it into recovery mode and restore it, as explained here: http://support.apple.com/kb/ht1808.

I need your help plz

Hi every one
I have one form depend on table for client details (code , name ,tel,address , ,,,,,)
I need to
when try to entering (name or code ) for one client system must
check if this name Already exists then do query to get other data for this client and doesn't enter new record
but if this name doesn't exist then
enter this data as new record
plz help me to solve this problem with any solve or work around or any thing

You can query data and also at the same time validate for example if a client exists, in a WHEN-VALIDATE-ITEM of an item do this:
BEGIN
     SELECT NAME
     INTO :CLIENTS.NAME
     FROM CLIENTS
     WHERE CODE_CLIENT = :CLIENTS.CODE_CLIENT;
EXCEPTION
     WHEN NO_DATA_FOUND THEN
     MESSAGE('NO CLIENT FOUND');
     MESSAGE(' ');
     RAISE FORM_TRIGGER_FAILURE;
END;the RAISE FORM_TRIGGER_FAILURE is optional.
Regards
Carlos

Could really use your help- BSOD with new Samsung ssd in a GX660r

I recently put a new Samsung 830 series 128 gb ssd into my MSI GX660r. It'll work fine for about a day, then start crashing constantly (BSOD) whenever it's in normal mode. If I start it up in safe mode it seems to be working fine, I haven't had a BSOD in it yet, but in normal mode it's crashing. Any help? I'm hoping its just a driver issue or something, but I really have no idea what to do and since I'm in grad school it's really not a good time (since I have no time to take care of the problem myself) I'll paste in the most recent crash log that it gave me:
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7601.2.1.0.768.3
Locale ID:   1033
Additional information about the problem:
BCCode:   3b
BCP1:   00000000C0000005
BCP2:   FFFFF880010F8626
BCP3:   FFFFF8800BBCAE10
BCP4:   0000000000000000
OS Version:   6_1_7601
Service Pack:   1_0
Product:   768_1
Files that help describe the problem:
C:\Windows\Minidump\102112-11325-02.dmp
C:\Users\Joseph Trees\AppData\Local\Temp\WER-18439-0.sysdata.xml

here's what all my dmp files say if it helps
==================================================
Dump File : 102112-11325-02.dmp
Crash Time : 10/21/2012 9:01:50 PM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter 1 : 00000000`c0000005
Parameter 2 : fffff880`010f8626
Parameter 3 : fffff880`0bbcae10
Parameter 4 : 00000000`00000000
Caused By Driver : Ntfs.sys
Caused By Address : Ntfs.sys+99065
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7efc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\102112-11325-02.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 277,296
==================================================
==================================================
Dump File : 102112-11263-01.dmp
Crash Time : 10/21/2012 8:50:25 PM
Bug Check String : NTFS_FILE_SYSTEM
Bug Check Code : 0x00000024
Parameter 1 : 00000000`001904fb
Parameter 2 : fffff880`09714e08
Parameter 3 : fffff880`09714660
Parameter 4 : fffff800`030a6d60
Caused By Driver : Ntfs.sys
Caused By Address : Ntfs.sys+48d8
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7efc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\102112-11263-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 277,288
==================================================
==================================================
Dump File : 102112-11325-01.dmp
Crash Time : 10/21/2012 8:41:41 PM
Bug Check String : SYSTEM_SERVICE_EXCEPTION
Bug Check Code : 0x0000003b
Parameter 1 : 00000000`c0000005
Parameter 2 : fffff880`03cbcc1a
Parameter 3 : fffff880`02a85be0
Parameter 4 : 00000000`00000000
Caused By Driver : aswSP.SYS
Caused By Address : aswSP.SYS+bc1a
File Description :
Product Name :
Company :
File Version :
Processor : x64
Crash Address : ntoskrnl.exe+7efc0
Stack Address 1 :
Stack Address 2 :
Stack Address 3 :
Computer Name :
Full Path : C:\Windows\Minidump\102112-11325-01.dmp
Processors Count : 8
Major Version : 15
Minor Version : 7601
Dump File Size : 280,856
==================================================

HT4061 i have lost my iphone need your help plz

please provide me the the serial number !!!

No one here could possibly know your serial number.
Read the article you linked

Need Your Help, Plz ...

Dear Friends,
Greetings,
I'm Using Forms6i,
1- Can You Tell Me How Can I Count The Number Of Returned Records From A Table Into A Tabular Form Using Control Block ?
2- And Can You Please Tell Me How Can I Move The Cursor To A Specific Record ? Like :Go_record (:Block_name, Rec_No );
3- If I've Retrived Multiple Records From A Table Into A Control Block , How Can I Know Wich Records Had Been Updated , The How Can I Just Reflect ( Save ) The Changes To The Table ??
Thank You All .

1. Function COUNT_QUERY can do that for you.
Or you can go to the last record with LAST_RECORD and check the record number in SYSTEM.CURSOR_RECORD.
2. First GO_BLOCK(block);
Then GO_RECORD (record number);
3. A control block is not meant to hold database records. Make a database block to query and update records from the database. Forms will do all the commit processing for you when you issue a COMMIT_FORM (or the user saves the changes).

Hello plz i need yours help i have problem with my i cloud back up when i restore old back up t

hello >> plz i need yours help i have problem with my i cloud back up when i restore old back up my problem exact with contact cause it disappears from contact list

iPhone: Transferring information from your current iPhone to a new iPhone

Need your help with the SaveAs function plz

Good day everyone,
I need your help yet again to figure out if what im trying to acomplish is even possible within Livecycle designer.
My issue is simple in nature, prevent the SaveAs "open window" to show up when they press the disk icon or use the saveAs option from the File menu if some of my fields are not fill-in.
To do so, i placed the code into the Pre-save area of my form and that code checks if certain fileds are filled-in are not.
If there not, i want to tell the user to fix this before the SaveAs occurs.
But right now, the problem is that the "SaveAs open" window shows up FIRST i have to tell where i will save the file and all that good stuff and THEN my code gets activated.
I was able to create my onw SaveAs button and it works well, the problem is that i want to also capture any save's that are executed around the form (the disk icon, the SaveAs in the FileMenu and the Ctrl+s)
Is there a way to do just that? right now i would be ok in just being able to tell Livecycle to cancel the SaveAs action if that was possible, but i cant find anyway of doing that neither
Your help is always appreciated
Thanx a lot.

I am having same problem with a 2011 year tax PDF fill in form I JUST got from IRS website.
The actual form is the 2011 8829.
I am running Windows 7 64 bit, Adobe Reader X version 10.1.4.
After trying to open the doc (nothing displays) I go to properties, and it says ...
Title: 2011 Form 8829
Author: SE:W:CAR:MP
Created: 12/23/2008
PDF Producer: Adobe LiveCycle DSesigner ES 8.2.
PDF Version: 1.7 (Acrobat 8.x)
Tagged PDF: No
Fast Web View: No
Yikes ... was hospitalized last year ... now I have 9 days to file.

HT201401 I need your help. I use iPhone 4 . I've just downloaded new iOS for while. Today my phone couldn't on and off . When I' was home and tried to connected with USB ,but it wasn't necessary. Pls help me.

I Need your help ,pls. I can't use my iPhone . It can't on and off , no display anymore.

Hello Apple_Addict22,
Thank you for your question. iOS 7 requires iTunes 11.1. First, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/ht5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M.

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

I want to get iBook, Facebook and Skype to my iphone 4.2.1 through my iTune, but I coudn't because it is said that it requires a newer version of iOS. Please I need your help. Thanks

If your iPhone can't be updated to a higher iOS version then the only way to get them is if you downloaded versions of them which were compatible with iOS 4.2.1 and you still have copies of those versions somewhere e.g. on your computer or on a backup - only the current version of each app is available in the store, and as apps (and other content) are tied to the account that downloads them, you will need to have older copies that are linked to your id

HT3743 plz i need your help

i need ur help plz i have an Iphone 4s it doesn't start to home screen there is just the Apple icon appears and that's all..i started it with dfu mode to restore to it's original software and still nothing could anyone helps me and i'll be so gratefull

Hi, Gaza898, and welcome to the Community,
We here in the Community do not have the tools to diagnose and rectify problems with Skype Numbers, however Skype Customer Service does. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service Skype is aware of lingering website issues. Temporarily enabling scripts, pop-up dialog boxes, and disabling plug-ins which could prohibit pop-ups may help get past website problems.
If you still experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and choosing a different path through the various drop-down menu options presented.
Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also block reaching an agent.
Last and not least, when you reach the last step of the process, remember to click on the "Start Chat" link when you are provided the choice of visiting the Community or starting an instant message chat with a customer service agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Plz i need your help - Skype Number not working.

i need your help 2 days a go i brought polanda number it was working good now its not working i dont no why plz could you help me this is my phone number
[removed for privacy and security] which i brought

Hi, Gaza898, and welcome to the Community,
We here in the Community do not have the tools to diagnose and rectify problems with Skype Numbers, however Skype Customer Service does. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service Skype is aware of lingering website issues. Temporarily enabling scripts, pop-up dialog boxes, and disabling plug-ins which could prohibit pop-ups may help get past website problems.
If you still experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and choosing a different path through the various drop-down menu options presented.
Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also block reaching an agent.
Last and not least, when you reach the last step of the process, remember to click on the "Start Chat" link when you are provided the choice of visiting the Community or starting an instant message chat with a customer service agent.
Regards,
Elaine
Was your question answered? Please click on the Accept as a Solution link so everyone can quickly find what works! Like a post or want to say, "Thank You" - ?? Click on the Kudos button!
Trustworthy information: Brian Krebs: 3 Basic Rules for Online Safety and Consumer Reports: Guide to Internet Security Online Safety Tip: Change your passwords often!

Absolue beginner need your help with basics of shell / applescript and xode

Guys,
I'm an absolute beginner in both xcode and applescript trying to wrap a few shell commands with some basic graphical elements.
I will need your help after 2 days of tests and un-successful trials.
Trying to display "$ifconfig en0" shell results into a text box.
Here is what I'm doing:
property networkif : missing value
property dhcpview : missing value
set the dhcpview to do shell script "/sbin/ifconfig " & networkif
I can't have this accepted:
set contents of text field "hmmm" to "DHCP " & dhcpview
hmm is the name I have set under Interface Builder to a text box (NSTextView object)
Xcode compiler returns me an error :
ToolAppDelegate.applescript:99: error: A “"” can’t go after this identifier. (-2740)
Command /usr/bin/osacompile failed with exit code 1
while doing this is absolutely working but on a separate popup window:
display dialog " Here is your IP address in ALU's network: " & dhcpview
I have no clue what I'm doing wrong.

It looks like you are trying to use *AppleScript Studio* syntax in an AppleScriptObjectiveC project - the way you connect the user interface items to your script is different in the new framework. If you are creating a new ASOC project, take a look at MacScripter's entry level tutorial AppleScriptObjC in Xcode for some examples.

Hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 :) what should i do need your help. thanks

hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 what should i do need your help. thanks

Have you charged ipad Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo You may need to do this more than once. Bsydd uk

Need your help plz with new HD 250 gb

Similar Messages

Maybe you are looking for