Needed areport for a material with its length & width
Hi friends i need a report in which i am to show material , plant , storage location , batch no , & material length & material width ( its charcteristics are defined by using a class ) , i have found table AUSP in which
field ATFLV field is populated with length & width details but i am not getting how to link this with material no & batch kindly anybody send me elaborated steps will be very thankful if with appropriate codes ,bcoz m new to abap .
Regards
Digvijay rai
HI SOURAV ,
i tried this you are saying what is correct but when i m taking the cuobj = internal object no , there is problem that but have differnt no as cuobj of 50 char & internal object no is of 18 & numc so there is problem
regards
digvijay rai
Similar Messages
-
Serial Number creation for a material with stock type
Hi,
I am not able to create the serial number for a material which should have valuation type, plant and storage location using the function module ITOB_SERIALNO_CREATE_SINGLE.
There is no export or changing parametre for this function module for Valuation type(EQBS-LBBSA),
Plant(EQBS-B_WERK) and
Storage Location(EQBS-B_LAGER)
Can any one suggest me the BAPI or function module to create a serial number for a material with valudation type, plant and storage location rather tan going for BDC to transaction code IQ01.
(Note: We can create the serial number with valuation type manually using the transaction code "IQ01" for agiven material.)
For suitable answers would be rewarded.
Regards
Badari
Edited by: badari Narayana on Feb 10, 2008 5:20 PMI have the solution below.
- Don't change Serial no. profile
- Goods issue all stock with mvt 201 or 261 into temporary cost object and note your text.
- Change Serial no. profile in material master
- Goods receipt all stock (You may ref. material doc.) and you need to input serial number for all materials.
Hope this solution can help you.
Edited by: Saiyaman on Dec 9, 2009 5:33 PM -
Problem with an enter inventory count for a material with serial number
Hi all,
I must post an Enter inventory count with the transaction MI04 for a material with serial number that it has more 250,000 of serial number, but the system give an error message of dump.
Are there any alternatives to post the inventory document?
Thanks.
Best regards,
Gaetanoyou can't but uplaod using LSMW rather entering manually otherwise you need coremod
-
Creation of Material Master for a material with Material Type NLAG
Hello Sirs,
I have to create a material which will be consumed directly. I would use the
material type NLAG (Non stock material). If I create a material with this material type, will it contain an Accounting view where in I can maintain the price of the
material? If it contains an Accounting view, which type of Price control should be
used (Moving average or Standard)? Further, can we maintain an info record for
a material with material type NLAG?How the price updation happens?
Regards
YogaHi Madhu,
Thanks for your reply. But, I have one more doubt. For non stock materials, we
will specify the cost centre and G/L account at the time of creation of Purchase order. Then, do we have to specify the valuation class at the time of creation of
Material Master since there is no automatic account determination?
Regards
Yoga -
Costing run for a material with alternative BOM
Hi Friends,
My requirement is to have product costing for a material with 3 different BOMs, in CK11N i can change the alternative BOM number to have costing run for 3 differesnt boms, but in ck24 how to proceed, My client requirement is such that the standard price should be the average price of the costing run from 3 different boms, and they are not interested in manual price change in MR21
Regards,
Arun Kumar R VHi Arun,
You can have a Standard cost estimate based on only one of the alternative BOM and Routing. This alternative is selected based on the business ie., whichever alternative is generally used in production frequently. This will be the std cost and whenever you do the production using the other alternatives, the difference in cost will be captured as Variance.
There is no option of having average or cost estimate for each alternative at the same time.
There is absolutely no use in maintaining price in MR21 for an in house produced material, since during Prod Order process the planned costs will be arrived at based on the quantity structure of BOM & Route only.
Thanks & Regards,
Vijaya Bhaskar A
Edited by: Vijaya Bhaskar A on Jan 7, 2009 8:57 AM -
MRP run for header material with bom usage-3
Dear All,
We have header material with bom usage-3.We maintain the stock at child components only ,not at header
I have created the planned independent requirement for header material.I have created a sales order but sales order is not shown in md04.
What can be the further setting I am missing for mrp run of above scenario.
with regards,
pradeepDear ,
Couple of checks points for you :
1.Check the material master Sales Org Veie-Item Categoery .As you have mentioned Item Categoery -TAQ which is not relevent for requirement planning throgh schedule line category -CT ( CT means there will not be any inventory or good movement and requirement will not be passed for MRP ) .Only CP -line item categoery does requirement passing through MRP and it will show u in MD04. So the summery is if you want to generate an MTO order for the same FG material , you should matian the Sales Line item categoery as MTO in sales Org View and it will pop up in VA01 whiel logging Sales Order .
Generally , TAQ item categoery are used in Project Billing or Delivery .ok and they will not be having any availabilit check so it KP ( no check ) .
But for MTO order , you should have availablty chek 02/01 in MRP3 view and also MTO Sales Item categoery .
Based on the above information logg an sales order , release credit chek in VKM3, SAVE and check in MD04.
Create PIR in MD61 and Run MRP on the both cases .I have tested its working .but noit with TAQ item categoery ok
2.Why do you need to create Sales Order for dependent Item-Y because it will be in X-BOM item ? Make sure that Y- should have Sales Item categoery in material master -MM02-Sales Org View as NORM item .If you really want to create sale sorder for this item , it should TAN or NORM .
3.Other PIR detail is fine .
Try and revert back
Regards
JH -
Creation of Sale Order for configurable material with availability check.
Hi,
We have a scenario in which the material is configurable. The configurable material (X) has few variants (Ex: X1, X2, X3, X4, X5). While booking the sale order, we use the material number (X).
Further, the material planning is done for the variants X1, X2, X3, X4, X5. The standard variants are planned for production in advance.
1. While booking the sale order, we want the availability check of the stock (type matching to happen). What needs to be done in configuration?
2. While booking the sale order, there is a possibility that the configuration selected will not match with any of the standard variants due to some additional requirements of the optional features, in such cases how to link the standard variants to the sale order & create requirement for additional requirements.
Regards,
UmeshHi Umesh,
1.Create material master for configurable material and variants in mm01.
2.Maintain BOM for the configurable material in CS01
3. Configur the variant configuration steps
a. Create charecteristics T.code CT04
b. Create values and assign classes
c. assign the values to charecteristics
d . Maitain dependence T.code CU01
e.create configuration profile t.code CU41
f.stimulate the configuration profile.
4. Do the availability check configuration through this path
IMG --> Sales and distribution > Basic functions ,> Availabilty check and Transfer of requirements.
5. Maintain the Availbility check field and MRP views in the material masters other wise you sit with PP people and do that
I hope it will help you
Regards,
Murali. -
Create inbound delivery for same material with multiple batches
Hi Experts,
An ASN( advanced shipping notification) contains multiple batch numbers for same material or line item.An IDOC has different segments with batch numbers but in SAP while creating Inbound delivery(VL31N) only batch number ( segment) get posted automatically in SAP other batches are need to post manuaaly.
I am using IDoc type : Delivery03 ,Message type: DESADV
How to resolve this problem?
Thanks,
AnilHi Anil,
Welcome to SCN for your first post. Did you check with your functional people about this.
Regards,
Madhu. -
Multiple EAN maintainance with one material with its stock quantity
Hi,
I have a question with regards to EAN.
Basically, I would like to maintain multiple EAN number and its correspondent stock figure of a material into the material master (see following example):
Material: 100200
EAN1 1234903948193 stock quantity 100pcs
EAN2 8374772990291 stock quantity 130pcs
EAN3 1378882990201 stock quantity 163pcs
Does the above possible to be maintain in material master basis view in the additional view with its relevant quantity?
The business rational for maintaining multiple EAN for this material is because this material can be produced in UK, Germany, & France:
EAN1 UK, EAN2 Germany, EAN3 France.
And further, business would like to keep track of how much stock quantity it has on each of these EAN:
EAN1 100pcs, EAN2 130pcs, EAN3 163pcs.
Please advise. Thanks
tuffyHi,
Multiple EANs can be maintained for a material in material master but the stock number cannot be tied to it.
For this you can use alternate methods like split valuation where in the valuation type refers to the EAN and this way you can maintain an indirect reference between EAN and stock numbers.
Hope this helps. -
GR for BOM Material with Serial number
Hi all
I have 2 serialised materials A and B, A is the Parent Material and B the child material (BOM Scenario), both having serial numbers
I want to do GR without PO (501movement type) for the A material with the serial number, while doing GR i want BOM to be trigerred and at the same time i need to enter the serial number for the child material also.
This is not a subcontracting scenario, here i am not issuing any goods to vendor, i am getting some used parts which i want to track individual accessiroes wise with serial numbers.
Kindly suggest the backend settings
Regards
Amuthan MTry MASE. it hold the last serial number.
-
Table for HU material with packed material
Hi all friends
In my business scenario i need to print the Handling Unit in Export invoice where i need to print the HU (Boxes) with all material pack in this HU (Box). Eg. one Box have packed material X, Y, Z,
Please tell me which table i can found that material with HU (Box) no.
full marks will be givenHi
Try this function module HU_GET_HUS.
In the ET_ITEMS table you will get all the child items.
If the child item ET_ITEMS-MATNR is having value means, that is the lowest level.
If you are looking specifically for tables means, you will get the details in VEKP and VEPO table.
Regards
Madhan D
Edited by: Madhan Doraikannan on Nov 12, 2008 10:47 AM -
How to raise PO for a material with transport cost but no material cost?
Hi experts,
My client wants to raise a PO in SAP for a material that will be purchased free of cost.
He only wants to invoice the vendor for delivery/transport costs.
Now, as I see it, a free-of-cost PO is not possible because it does not allow adding any pricing conditions. May be I am not aware of some tweak that is available.
Please provide your help on this. Thank you.Hello,
Firstly Prepare a Po with a line item that you want, then chick the Free check box.
then go to the Item tab (below), go to conditions & add freight (Freight % or Freight (Value) ) with the required amount.
you can change the Assignment from the Vendor to a Transporter / Freight forwarder, that you want.
That is it. you will have a Po with no Commercial Value but just Transport Cost.
Thanks & Regards,
Atul Sabnis
Edited by: Atul29 on Jul 7, 2011 1:52 PM -
GATP allocation check for configurable material with characteristic
Hi APO Gurus,
We are using configurable products and wanted to go for GATP allocation check based on Characteristics.
The scenario is goiven below,
All our products are configurable materials. At the entry of sales order , the characteristic values are updated and then the sales order is checked for GATP.
When the order come to APO-GATP for allocation check , here I want to check the allocation for configurable material.
But the allocation quantities are given for a combination of Configurable material and its characteristics.
How can we map such scenario?
Do I to create the CVC at family level that is configurable material level ?
How the characteristic values are considered in allocation.
Waiting for your reply.
regards,
Ravianswered.
-
I need Air for desktop application either in .exe or in .air with embedded captive runtime just like .apk . I don't want to install adobe air separate . everything should come in installer
I have adobe flash professional cc development tool , let me know whether I have to go with other development tool???
your reply will increase my confidential level
please anyone can help me to solve this problem
Thanks®ards
NiranjanAdobe Flash Professional CC manual
1) Create new project
2) Configure your Project properties
3) Embed runtime, so you users can use Adobe AIR without pre-installed Adobe AIR runtime
4) After publishing you will receive %APP_NAME%.app folder that contain your project files -
Cancel insp.lot for batch material with serial number?
We have a problem with an inspection lot....
A few months ago we made a goods receipt for batch material... it ended up in Q- stock.
The weeks went by and the material was changed ito a serial number material... that process works fine...
But now we want to scrap the material that is batch-handeled ... the inspection dont want to let go.. it want serial numbers... even if I create serial numbers for this the inspection lot
dont let me register any numbers.. So I cant cancel/delete it... And after all I just want to scrap the batch...
Can someone help me?
// Andreasif stock of that material with serial numbers exist, then scrap that stock and disable the serial number for the material by deleting the serial number profile in the work scheduling view of the material master.
then try cancelling the inspection lot. After cancelling the inspection lot, activate the serial number for that material again and bring back the scrapped stock into the unrestricted use.
Note: please advice the users not to post any stock for that material till you complete this or else block the posting t.code for all the users.
Maybe you are looking for
-
Backlit keys no longer working...
After recent SMC? firmware auto update, my backlit keys no longer work. When I try to turn them on (dim/bright) via keyboard shortcut keys, I get a circle with a slash thru it on the on-screen keyboard logo...
-
Need to format a vpn log text file into a format that can be written directly to a SQL table
I am trying to do two thing inside of powershell 1. Take a vpnlog text file "C:\temp\ps3\vpnlogs\testlog.txt" formatted as such and be able to directly add the columns to a sql table "Number" "Date" "Time" "Interface" "Origin" "Type" "Action" "Servi
-
The ipad music app does not allow me to play certain tracks that i have synced via my itunes. The tracks are clearly visibly in the music app but when tap on them to play they wont play. what do i do?
-
Since the software update 2.55 needs to be downloaded I can't sign in and I can't download it because my connection is not working becuase I am not signed into psn can someone help
-
Multiple instances of iTunes library in Computers menu
Since upgrading to Yosemite/iTunes 12, I see two instances of my iTunes library in the Apple TV "Computers" menu. The thing is, they're there even when iTunes isn't running, and home sharing is off for that library. I've tried restarting the ATV and