Needed clarification on RWRKBENCH and CACHE

Hi,
        I'm new to SAP-XI, Ihave some doubts regarding runtime work bench and cache refreshing
               1.what is difference between complete cache refresh and delta cache refresh in SXI_CACHE transaction.If delta cache refresh is choosen then which components cache will be refreshed?
2.In which case we have to go for complete cache or delta cache refresh ?
3.what is difference between monitoring on RUNTIME WORK BENCH & SXMB_MONI?
               Plz if any body knows anwers to this questions kindly provide explanations.
Good answers will be rewarded.
                                                                                Regards,
                                                                                Monica.

Hi Monica,
1.what is difference between complete cache refresh and delta cache refresh in SXI_CACHE transaction.If delta cache refresh is choosen then which components cache will be refreshed?
1.Delta Cache Refresh: Any new objects that have been created/modified during the design/configuration activities are inserted into the temporary database tables when we use delta cache refresh option.
2.Full Cache Refresh: All entries in temporary cache tables are deleted and a background program for inserting the complete information about all the design/configuration objects.
2.In which case we have to go for complete cache or delta cache refresh ?
check this
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off
How to handle cache
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
SXI_CACHE
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off%3Fpage%3Dlast
3.what is difference between monitoring on RUNTIME WORK BENCH & SXMB_MONI?
In RWB we monitor messages whic goes via Adapter Engine.. i.e we monitor messages which r in JAVA stack
In SXMB_MONI we monitor messages of Integartion Engine i.e messages of ABAP stack!!
Hope u r now clear!!!
regards
biplab
Use a Good Subject Line, One Question Per Posting - Award Points
Message was edited by:
biplab das

Similar Messages

Need Clarification on sga_target and sga_max_size

HI,
I need some clarification in SGA_TARGET and SGA_MAX_SIZE.
I have the parameter like below.
SGA_MAX_SIZE=10G
SGA_TARGET=9G
And I spread the 9G to all components like (DB_CACHE,SHARE_POOL etc.,).
My doubt, Incase db need the memory more than 9GB, Whether it automatically take the extra 1G from sga_max_size
or we have to change the sga_target to 10G.

Unless and untill, we set the sga_taget=10G, The extra 1G(from sga_max_size) is not used.
Am i correct?No - its wrong. Any change in the value of SGA_TARGET affects only the sizes of the auto-tuned components. If you increases its value then increased memory will be distributed in only among the components controlled. So, yes 1GB will be used, because have sga_max_size=10G. If you decrease the value then reduced memory is taken back by the auto-tuning policy from one or more of the auto-tuned components.
If SGA_MAX_SIZE is greater than SGA_TARGET, you can increase SGA_TARGET without restarting the instance. Otherwise, you'd need to shutdown and restart the instance if you wanted to increase SGA_TARGET.
Regards
Girish Sharma

Need Clarification On Unicode and Upgrade-ECC6.0

Dear All,
I need some clarification unicode and upgrade . It would be great help if you give your time .
We had 2 code pages - 1100,1401 in 4.6B system. We had languages - FR,EN,ES,PT and PL. The system has been upgraded to ECC6.0 non-unicode now.
Now in I18N->System configuration (RSCPINST), only EN is listed. SPUMG asked for activation of I18N to proceed. When the I18N activation was done, it has knocked out the code page 1401 from TCPDB table.
Is this normal?
But, the code pages 1401 is shown as consistent in SCP transaction.
The system setting has changed to Single code page. Will this affect unicode migration? How did the additonal code page 1401 which was in 4.6B get knocked out
now? How did the languages ES,FR,PT, IT and PL which were in 4.6B get knocked out of RCPINST?
We are manually filling the vocabulary since SPUMG is not showing Scanning tabs. The language key in vocabulary is not completely set. The reprocess logs are not completely green. Will this allow unicode migration now? Can we start unicode migration even with this status.
Regards,
Santosh
Edited by: santosh suryavanshi on Nov 18, 2010 11:11 PM
Edited by: santosh suryavanshi on Nov 18, 2010 11:11 PM

Hi Santosh,
SAP ECC 6.0 is not supported with MDMP. This is the reason for the behaviour in RSCPINST.
The standard way for an upgrade based on start release 4.6B with MDMP would be TU&UC (see SAP note 959698).
Do you follow this procedure ?
Best regards,
Nils Buerckel
SAP AG

Need clarification on Project professional CACHE

Hi
I am opening Project plan from cache location in MS Project 2010 (not from retrieve list of all projects from project server)
but the issue is can see updated project plan (as like open from project server)
Steps which i performed below
1. Created project plan "My Test Project"with 10 tasks and published
2. other user added couple of tasks in same project plan "My Test Project" and published (in different machine)
3. Now i opened project plan from CACHE location, ideally i should able to see 10 tasks instead of 12
Even though i opened project plan from CACHE location why its showing updated copy
Any Suggestions
Regards
Santosh

Hi Santosh,
You are indeed misunderstanding the local cache. If you publish a 10 tasks project and then other PM adds 2 tasks to the project, eventhough you open the project from you cache, you'll have the 12 tasks.
Basically Project will check if the version on the server has been updated AFTER your version on your local cache. If not, it will open your cache version. Otherwise (meaining other PMs have made changes to the project), Project will retrieve the changes
from the server, meaning you'll see the 12 tasks. Think that if Project Server would not do that, you'll just have your 10 tasks, you could update the project plan and publish it, loosing the other PM's 2 tasks.
Here is a clear article about the local cache:
http://www.epmcentral.com/msproject/cacheoverview.php
Hope this helps,
Guillaume Rouyre, MBA, MVP, MCP |

Need clarification on SATA and PC3200

First of all thanks to all who replied to my first question, I robbed a 3.5 drive out of an old computer and will use it to load driver then remove it. Or I may copy those drivers to cd and see what happens. Is it possible to do this and not have to install a floppy at all? My main question is when I install the Sata hard drive on a brand new system will it work for me to install the OS (win xp) then install the drivers? Whats with using either promise or intel SATA controller? Also should I expect a problem using OCZ pc3200 dual channel ram on the first startup? Sorry to be so dumb but I cant find this info on the net in any detail and I really need this to go smoothly my first time. Here is a rundown on what I am putting together:
Full tower ATX case, loaded with 5 fans
420 watt PS with dual fans
MSI neo FIS2R
P4 3Ghz 800fsb
MSI ti4800se 128mb ddr
Seagate 80GB SATA
Lite on 16x dvd rom
logitech wireless optical moue and keyboard
Win XP oem full version
OCZ pc3200 1GB dual channel copper heat spreader
ancient 3.5" floppy drive circa early 90's (will be removed)
Thank you again for your help.

Copying the drivers on the Windows CD will not be suffient i'm afraid. My best guess is install the driver from an old floppy drive and afterwards you can remove it and disable the FDC controller in your BIOS.
As for the dual channel DDR setup, i didn't experience any problems, so i don't think you will get any either.
Last, the promise S-ATA/ATA controller is only for expansion. I've tested the speed of both controllers (ICH5R and the promise) and didn't find any shocking differences.

Needs Clarification Regarding Segments and Datafiles

Hi,
I want clarification regarding Segments, Datafiles and extents.
As we know that A segment is made of one or more extents and extents are composed of one or more datablocks in the HD.
Since all data are store in Datafiles which are composed of extents and datablocks. I want to know weather a table(Segment) can span to multiple datafiles or in a sigle datafile.
Regards,
D.Abbasi

And an easy way to check it by yourself :
SQL> create tablespace abbasi_tbs
2 datafile 'E:\ORADATA\DEMO111P\abbasi_01.dbf' size 1m autoextend off,
3 'E:\ORADATA\DEMO111P\abbasi_02.dbf' size 1m autoextend off;
Tablespace created.
SQL> create table abbasi_tbl (id number)
2 tablespace abbasi_tbs;
Table created.
SQL> insert into abbasi_tbl
2 select rownum as rn
3 from dual
4 connect by level <=10000;
10000 rows created.
SQL> commit;
Commit complete.
SQL> select distinct file_id
2 from dba_extents
3 where segment_name ='ABBASI_TBL';
 FILE_ID
 6
 7
or...
SQL> select distinct DBMS_ROWID.ROWID_RELATIVE_FNO(rowid)
2 from abbasi_tbl;
DBMS_ROWID.ROWID_RELATIVE_FNO(ROWID)
 6
 7
SQL> select file_name from dba_data_files where file_id in (6,7);
FILE_NAME
E:\ORADATA\DEMO111P\ABBASI_01.DBF
E:\ORADATA\DEMO111P\ABBASI_02.DBF
SQL>Nicolas.
added the ROWID function usage
Edited by: N. Gasparotto on Jun 21, 2009 11:02 AM

BPM, Workflow and Netweaver - Need Clarification

Hi Guru,
I am new to workflow, BPM and Netweaver. I have several questions about those concepts.
1. What is/are the different between workflow and webflow. Which scenario should take workflow into consideration? Which scenario webflow can be applied to?
2. What is/are the different between workflow and BPM. If I am going to implement workflow in a company, do I need to implement business workflow as well as BPM?
3. I need clarification on Netweaver platform and concept.
4. What is/are the different between workflow in R/3 and workflow under Netweaver?
5. If I am going to implement workflow integrated with R/3 and Outlook email, do I need to buy new wrokflow for Netweaver and Netweaver platform or alternatively, I can use business workflow module under R/3 system?
Sorry for many questions asked. I am new to those products. I am now working on software selection for workflow technology. My company is going to implement new workflow to client. Thank you very much.
Cheers,

Please ask only one (or closely related) questions per thread. This makes it a lot easier to get a good structure in the database of previously answered questions. While we are on the subject of previously answered questions, I think you should have a look at them....
My suggestion is therefore:
1. Close this thread
2. Read the Frequently Answered Questions. Before you ask (here are many workflow answers)
3. Search the forum.
4. Create new threads if you have questions afterwards.

Cookie settings are correct;history,cookies and cache have been cleared.Still some sites say I need to enable cookies

Cookie settings are correct;history,cookies and cache have been cleared.Still some sites say I need to enable cookies.

You need to enable third-party cookies if you want to logout from Hotmail. If you do not want to enable third-party cookies (I don't) then you need to remove the live.login and passport.net cookies yourself.
See also [[Disabling third party cookies]]

Hi, I have an early 2008 24" iMac, I need more storage space and was wondering if I could fit a 3TB Western Digital Caviar Green HDD into it with out any problems? This is the one I've seen, Western Digital Caviar 3TB SATA 6 GB/s 64MB Cache 3.5 inch

Hi, I have an early 2008 24" iMac, I need more storage space and was wondering if I could fit a 3TB Western Digital Caviar Green HDD into it with out any problems? This is the one I've seen, Western Digital Caviar 3TB SATA 6 GB/s 64MB Cache 3.5 inch

My bad?
You're original response was questions/post about an iMac. Now you've edited it to ask about a Mac Pro?
You can more easily add internal drives in a Mac Pro.
Not too terribly easy to add/replace drives in an iMac.
If younhave questions about a Mac Pro, try posting in the Mac Pro forums.
Much more knowledgeable users there.

Domain Guideance and Clarification using SVN and an Export suggestion

Hello Oracle SQL Data Modeler Support,
Apologies if this has been documented somehwere and I have missed reading it, but have gone through the User Guide and cannot find the clarification I want regarding domains.
1) WHAT IS BEST PRACTICE TO SAVE WHEN USING SVN
From the forum I have picked up that the domains file is in the following directory:
~\datamodeler\datamodeler\types
File name is 'defaultdomains.xml'
When I come to save the file using SVN I get 'Choose versioned folder for storing system types'
I assume this is where the domains file is stored.
I require the Domains to be avialable centrally to all Designs I create, what should I do?
a) Set the folder to ~\datamodeler\datamodeler\types
b) Create a design called 'Domains' and store it in this folder
c) Any thing you may suggest
2) EXPORT OF DOMAIN FILE SUGGESTION
This should be a quick win for you, can you please add an Export Domains function, seems this needs to do no more than make a copy of the defaultdomains.xml file and create it in a specified export directory.
Will avoid having to go through the forum to pick up that the defaultdomains.xml file needs to be copied and transfered over for new SQL Data Modeler installations.

Hello,
I require the Domains to be avialable centrally to all Designs I create, what should I do?Default location is fine if SVN is not used and if all designs are used only on that computer.
If versioning is used then it's better to have separate directory for domains and this directory shouldn't be part of any design's directory - i.e. for designs you can have directories c:\des_1, c:\des_2 ...c:\des_n - one directory per each design and that directory will contain design DMD file and design folder. For domains you can have directory c:\DM_Sys_types and you need to set this directory in "Tools>Preferences>Data Modeler>system types directory" - logical types, RDBMS sites and scripts also will be stored there.
Philip

Lenovo U310: Clean Windows 7 Installation Guide (including Rapid Start and Caching)

Hi there,
this is the first time that I am writing such a guide/tutorial/whatever you may call it – there are probably better ones, but though not being a total computer noob, it took me almost one week to get this pretty (now again) little beast running again. So hopefully this helps some others to avoid such stupid downtimes.
A brief overview on what has happened to my original win 7 Home Premium:
As some may know, this laptop is very well usable as a “Hackintosh” called Macbook clone. So that’s what I did. It turned out to be nice, but I wanted to go back to Windows after a while, using a clean W7 Pro installation to start over. Actually an easy task, format all drives, install Windows, be happy. Just as I had been doing this for years. Unfortunately, it turned out to be a real challenge. First, I couldn’t “see” my drives during installation (and thus not install), then I got random errors during installation aborting it at different points and finally rapid start and caching didn’t work. Every time I tried to activate them (after Win installation), it crashed my PC. I even found an (official Lenovo!) guide stating to install W7 on the SSD, which worked, but sucks due to space limitations. Oh and another very nice thing: The SSD showed up during WIN installation (but not the classical hard drive) stating it was about 60 GB. So as you can see, I have had a lot of different tries and errors. Why I didn’t use Lenovo Easy Recover? As said before, I erased all partitions…
Before we start: If you have a good Windows running on the Laptop, do yourself a favor and disconnect the RAID 0 disks using the Intel Rapid Storage Application before(!!!) proceeding. It will make things much easier. And don’t forget to get all you data on an external drive or something.
Ok, now let’s start.
1.) Prepare a USB Stick with the following driver
 http://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=21730 (choose f6flpy-x64.zip If you’re running a
 64-bit system (standard nowadays), take f6flpy-x86.zip if it is a 32-bit Windows, just download and copy them
 into the stick’s root directory) and plug this stick in one of the left side USB ports.
2.) You’ll need Win 7 on either a DVD (plus external drive, for sure) or (bootable) USB stick
3.) Connect your drive/stick (with W7) to the right side USB port.
4.) Switch the computer on, immediately hit FN and F2. That will open the BIOS.
5.) In the BIOS, navigate to the very right section (“save and exit”) and navigate the cursor to “load setup defaults”.
 Hit enter to approve.
6.) After that, go to the “boot” tab and disable UEFI-boot.
7.) Next, go one more tab to the left and set the controller setting to RAID (NOT AHCI or Compatible!!!).
8.) Navigate the cursor down to “Intel Rapid Start” and hit enter. A submenu will pop up-
9.) Disable the first entry in that window, that will make the rest be disabled as well.
10.) Navigate to the very right tab, this time hit save and exit.
11.) The PC restarts.
12.) Immediately hit FN and F12 to open the boot selection menu. Select to boot from your W7 DVD drive or USB
 stick.
13.) Click yourself through the whole process of installing Windows 7 until the page comes up where you will have
 to select where to install it.
14.) Click on “load drivers” and after a few seconds your downloaded driver should be there. Click ok to use them.
 Please do this step even if you can see your drives (SSD Disk 0, 32 GB and HDD Disk 1, 465(<-?) GB) as you
 would expect them – otherwise you’re very likely to get an error during the install process.
15.) Now erase all partitions on both drives and select the HDD as the drive to install W7 to – NOT THE SSD!!!!!
 Seriously, don’t choose the SSD.
16.) Windows will probably say that some extra partitions are necessary and so on, click ok and install Windows.
17.) After the installation has finished and you see your Desktop, I suggest you to proceed with the next steps in the
 following order to see as early as possible if you are on the right way.
18.) Install the Chipset driver, restart.
19.) Install the Intel Rapid Storage “driver” and check the box where it asks to additionally install the control center.
 Reboot.
20.) Go into BIOS (FN and F2) and enable Intel Rapid Start (the one you disabled in Step 8 and 9)
21.) Boot into Windows.
22.) Click on the Windows button, type cmd and right klick on the cmd.exe, select to run it as Admin.
23.) Now you’ll create a hibernation partition on the SSD. (which by now should be completely empty as we’ve
 deleted all partitions in step 15)
24.) In the command prompt that we have just opened, type: (without quotas, for sure)
“diskpart” and hit the enter button
“list disk” and hit the enter button
Now you should see your ssd as disk 0 and your hdd as disk 1
If your ssd is disk 0 (that would be standard), write “select disk 0”, otherwise write: “select disk 1”, and hit the enter button.
Now write “create partition primary size=4096” and hit enter again. [if you have 4GB of ram, type 4096, if you have 8 GB of ram, use 8192]
Now write “detail disk” and hit enter to see the volume number behind the volume that we have just created (it is 4 GB or 8 respectively, should be easy to find), in my case that was “2”
Now type “select volume 2” if your 4 or 8 GB volume has number 2 as well, otherwise use the number you found out in step f. Hit enter.
Finally, type: “set id=84 override” and hit enter for one last time.
It should now say back that the id has been set successfully.
Exit the command prompt. (close)
25.) Reboot
26.) Install the Rapid Start driver. Reboot.
27.) Open the Intel Rapid Storage Application.
28.) Click on accelerate and approve the settings. Two RAID’s will be created. Reboot.
29.) Install the remaining drivers, have fun with Windows Update and that’s it!
Good luck to all of you… And hey Lenovo - wouldn't that have been your job after all these posts showing your costumers in trouble? Just my two cents...
If you want, you can now turn on UEFI-boot in BIOS.
PS: If, after installing all drivers, you happen to see one unknown device in your device manager – this one belongs to Lenovo Connect Software that came with your Laptop. (Updates FB, Email etc when PC is in sleep mode) If you install Lenovo Connect it’s going to be fine, however, I would not recommend it as it is said to use a lot of energy and cause some other problems. So just live with it, your PC is totally fine without it.
Kind regards from Shanghai

Seriously guys, I can't use my 3 days old laptop. Some help would be mostly appreciated. At this point, the network connection issue doesn't show up anymore, it's just a blank screen after reboot. I reinstall windows and do it all over again just to achieve the same result.
Now couple of things caught my attention: as I load the "6flpy-x64.zip" driver from step 14, I get a message saying I need to install signed drivers, because unsigned ones are likely to mess up the system.
Secondly, I could not find any Rapid Storage Technology drivers for Windows 7 (particularly for U310 model), so I use the Windows 8 ones (http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS031455), which seems a silly thing, yet I know of no alternatives.
Could it be any of these issues to cause my problem? Or smth else? Please help!

What is the diffrence between cookies and cache, is it safe to remove cache?

what is the difference between cookies and cache , is it safe to remove cache ? . I had cleaned cookies many times but I have not removed cache , does it goes on increasing day by day ? please let me know

Cookies are small files that contain information useful to a web site -- such as password, preferences, last date visited, etc. You may remove the cookies that you don't want adn since some of them are a privacy issue, many people remove them all.
Cache is just a collection of data downloaded to help display a web page. After you leave a site, much of the cache is left on your computer and is no longer needed. You can always remove the cache because it will be replaced as needed.

Problems in SLD and Cache refresh (SXI_CACHE).

Dear Experts,
I am facing SLD and Cache refresh problems in PI 7.0 on HP-UX.
1) SXI_CACHE : Last Error During Cache refresh is showing LCR_GET_OWN_BUSINESS_SYSTEM - NO_BUSINESS_SYSTEM error. And also Start Delta Cache Refresh / Start Complete Cache refresh are in deactive mode (Frozen).
2) SLDCHECK : Log says No Business System for ABC Client 100 ".
where ABC=SID. Business System INTEGRATION_SERVER_ABC is declared in SLD and client 100 is assigned.
My question is : Is this a BASIS or DEVELOPER issue? Also please let me know if you have any solutions for the above mentioned issue. Thanks in Advance.
SLDCHECK Log Snippet:
SLD server access settings:
host name: ABCXIDEV
port number: 50000
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call terminated sucessfully
List of business systems maintained in the SLD:
INTEGRATION_SERVER_ABC
ERP_DEV_100
Calling function LCR_GET_OWN_BUSINESS_SYSTEM
Retrieving data from the SLD server...
No corresponding business system found for system ABC client 100
=> Check and maintain the SLD content for the current client

Hello,
Since this is an PI system, your XI consultant must have created/will need to create business systems in SLD for the scenario to work properly. This error is because it cannot find the business system.
You cannot point out the fingers on Basis or XI and say that it is THEIR issue. Please consult with the consultant who is doing the XI interface and check if the business systems he require are properly created in SLD. If not, create them or ask them to create it (if they are allowed to..).
From the error, what i can see is that you have defined an integration server INTEGRATION_SERVER_ABC in SLD . the XI interface is checking the required business system in the integration server INTEGRATION_SERVER_ABC in SLD but cannot find it over there. Please check the integration server INTEGRATION_SERVER_ABC in SLD and talk to the XI consultant and you will be able to fix this with their help.
Hope this helps you..
Regards,
Jazz

I want to use a mac mini as a server supporting storage. Can I pair my macair to it for when I need to perform updates and maintenance ?

I want to use a mac mini as a server supporting storage. I have other devices such as an iMac and iPad that will access information from the server. I do not want to purchase a monitor and keyboard as the unit will sit in a cupboard out of sight. Can I pair my macair to it for when I need to perform updates and maintenance ?

I have a 2010 Mac Mini running Yosemite and Server which I use
as a headless home server.
I have is set up to allow screen sharing and can connect to it and
control it with my iMac, Macbook Pro, iPhone, and a 2011 Mini Server
that I use as an HTPC.
You can check this out for all the Yosemite Server capabilities:
https://help.apple.com/advancedserveradmin/mac/4.0/
I have iTunes Home Sharing set up on it and have my entire iTunes
library on it. I can then use any of my Macs to play Movies or Songs
from it and only keep locally a select subset of that on my individual
devices.
Rather than and update server, I utilize Server's Caching Service. The caching
server will duplicate any update download (system or MacApp Store purchases)
any time a device that is connected to my network down loads one. The update will
then be stored locally and all other devices will download the update from it which
can be faster than from Apple directly. This has the advantage of only having to download
once with limited bandwidth internet connections. There is also an Update Server service
available, but it is some what more involved in setting up. However, it will download
and store all available updates.
There is another thing as well if you do not care for syncing things like Contacts, Calendar, etc.
to iCloud, you can set Server up to sync these items across devices locally.

I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?

I want to upgrade my MacBook Pro 5,2 to Lion, but specs says i need intel core 3 and i have intel core 2, there will be a problem? my computer will run slow? I will need to reinstall my programs again?
Hardware Overview:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro5,2
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          6 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP52.008E.B05
SMC Version (system):          1.42f4
Sudden Motion Sensor:
State:          Enabled

Check to make sure your applications are compatible. PowerPC applications are no longer supported after 10.6.
Application Compatibility
Applications Compatibility (2)

Needed clarification on RWRKBENCH and CACHE

Similar Messages

Maybe you are looking for