Needed: Lightbox like behaviour for single images

Hi there.
CS5 with PHP MySql.
My question refers to this link as an example:
http://www.energywa.co.za/engines/index.php
I want visitors, after clicking on the engine, to have in opened in lightbox style. The thing is that I could, up to now, only find Lightboxes that work with gallaries with more than one image.
I will appreciate it if someone could help me, please.
Regards,
Deon

Have a look here http://www.adobe.com/cfusion/exchange/index.cfm?event=extensionDetail&extid=1990024
If I remember right, this can be configured for just one image or for a gallery of images.
Gramps

Similar Messages

Explosion effect for single Image in Flash CS5

Hello All,
I was hoping for assistance on how to recreate an explosion effect like Flash 8 adn MX used to have. It seems to be missing now. It is not in the presets. I tried to break apart but something is missing. How can I accomplish this? I am trying to explode and IMAGE not TEXT. Particle tutorials seem to explode into hundreds of parts. Im looking for 12 to 16 exploded pieces. I'm not the great at AS2 or 3 but any assistance would be appreciation. Again this is for an image not text so the simple Break apart doesnt seem to be working. Please note I am Using Flash CS5.
Thanks in advance.

Thanks for the response but that is not what I need. I need to explode or better yet Break apart a simple image into maybe 12 or 16 pieces and move them off the screen. This used to be done by a Explode effect that was in an older version of Flash. I do not want to download additional software (tweenmax?). but I am ready to try simple AS3 or AS2 code if there is not way to do this. Again this in NOT text and I already tried to break it apart in small symbols but the whole image moves instead of the small piece I broke apart. Please help
Thanks in advance.

Explosion effect for single Image in CS5

Hello All,
I was hoping for assistance on how to recreate an explosion effect like Flash 8 adn MX used to have. It seems to be missing now. It is not in the presets. I tried to break apart but something is missing. How can I accomplish this? I am trying to explode and IMAGE not TEXT. Particle tutorials seem to explode into hundreds of parts. Im looking for 12 to 16 exploded pieces. I'm not the great at AS2 or 3 but any assistance would be appreciation. Again this is for an image not text so the simple Break apart doesnt seem to be working. Please note I am Using Flash CS5.
Thanks in advance.

http://active.tutsplus.com/tutorials/effects/create-your-own-pixel-explosion-effect/

Resampling/sharpening script for single images

I ask a lot of questions in this forum, but rarely have anything to offer back. Here's an offering that may come in useful in certain situations.
Muppet Mark, a talented Applescript writer, has put together a script to my specifications for resampling and sharpening single images in InDesign. It works in CS2, 3 and 4.
The operation is as follows:
1. You select the image in InDesign.
2. The script resamples to an effective ppi (at printed size) of 300.
3. The script then calls on an Action SHARPEN which applies sharpening via a Smart Unsharp Mask. An edge mask is also applied.
The process is non-destructive, so if the default sharpening is not quite right, it can easily be changed by opening the image in PS.
The script, action and details of operation (148 kB) can be downloaded from:
http://www.mediafire.com/?mij5dnyhtcl
A CS4 test file (88 MB) to see the effect of the script can be downloaded from:
http://www.mediafire.com/?yeymmdievnv

Let me be the first to thank you. Not sure when I'll get a chance to test it, but it could come in handy.

How do I change filename for single-image HTML pages in web gallery for LR 3

Hi,
I would like to change the default filename for the HTML pages produced by Lightroom 3 in the web gallery. Specifically, I would like to remove the string "_large" from the HTML filename, so it corresponds exactly to the image filename.
Specifically, the URL by default is like this:
http://www.mysite.com/content/_c_EMT2146_large.html
and I would like it to be like this
http://www.mysite.com/content/_c_EMT2146.html
I assume there is some way to make this change using the template editors, but I can't figure it out.
thanks,
James Riemermann

Turns out there's a fairly easy way to change that on Windows, but I can't figure out an equivalent on a Mac, which is where the need is. On windows, I can edit (after backing up) the following two config files:
C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.6\Shared\webengines\default_html.lrwebengine\grid.html
C:\Program Files\Adobe\Adobe Photoshop Lightroom 3.6\Shared\webengines\default_html.lrwebengine\manifest.lrweb
In which the "_large" string is appended and can be removed, following which the gallery works exactly as I would hope.
But I can't find the equivalent files on the Mac, though I would assume they exist.

I need help with searching for an image inside another image

I need to write a program that checks for a specific image (a jpg) inside another, larger, image (a jpg). If so, it returns a value of true. Can anyone help me?
Winner takes all. First person to solve this gets 10 dukes.
Please help.

Hi,
I would use a full screen image Sequence made with png for transparency and put your article behind. no auto play, stop at first and last image. and information for swipe to display article.

We need a "random" option for sorting images

I often need to randomly sort huge collections of images for web sites. This is a pain to use the "user sort" mode. Dragging and dropping is to slow.

I tried to make my onw order of pictures into a slide show,
but I do not find how to move them.
can you help me ?
thx
An

Set default behaviour for pasting images?

I often am faced with copying images from pdfs and placing them in pages. I then have to select each image and in the inspector choose 'floating' as pages always inserts as inline. Is there a way to switch Pages to always insert image data as floating? It is a pain and a real interruption of my work flow.
Pages 09.

Brian,
If you Command-Click in the margin of the document prior to pasting or dragging the image to the document, it will be inserted as Floating. If you leave the Text Insertion cursor active in the Text Layer, the graphic will come in as Inline.
You have the control over this behavior with a simple click of the mouse prior to the import.
Jerry

Do I need spyware protection like norton for the ipad

do I need spyware like norton for ipad

Also, go to Settings and disable in-app purchases. Though there are many legitimate reasons to purchase something from within an app, in-app purchases include various methods of extracting money from you that completely bypass the App Store. Many of them are blatantly fraudulent.

Lightbox 2 -size & position of image

By default, the new image opens in the centre of the page and
is cropped to a default size. How can I adjust the code so that it
opens at a specific location and expands to specific size, please?
I want to use the code for single images of same size and to open
always at the same location..

thanks. they have a forum, named huddletogether, but that is
pretty well useless. Although same problem has been posted many
times, the developer and others have not replied.... Apparently,
the developer is TOO BUSY to attend to trivia like replying to
questions about his OWN product. Pretty poor... I say...Not
everyone wants the box to open in the centre of the page..:-((
Hence my post here, in hope that someone might have the solution?
UPDATE at 16.00gmt. I have played around with the code in the
lightbox.js file. Line 237 has a line :
this.lightbox.setStyle({ top: lightboxTop + 'px', left:
lightboxLeft + 'px' }).show();
I have added couple values, which position the image exactly
where I want it. As:
this.lightbox.setStyle({ top:160+ 'px',
left:(-100+lightboxLeft)+ 'px' }).show();
However, I am still looking for the code which gets the
image's dimensions.... Maybe, there is no such a thing, as the
enlarged images are always shown the same size; they are
increased/decreased to the default value...
Any ideas, please?
UPDATE: That's all sorted. But as a result, the 'close' and
'load' images are now showing far, far too big and in wrong
position...

Automated removal of Office 2010 Single Image

I need to remove 32bit version of Office 2010 Home and Business from 400+ Windows 7 (x64). I have tried running MsiExec.exe /X{90140000-003D-0000-0000-0000000FF1CE}, but as others pointed out it does not work for installs from Single Image
http://answers.microsoft.com/en-us/office/forum/office_2010-office_install/need-to-uninstall-ms-office-single-image-2010-32/69962e2c-ba90-49d5-934f-3c6d50b51e8c
Running MicrosoftFixit50450.msi works, however it would take a lot of time to remove the software using the manual method.
Does anyone have more practical solution for this issue?

an a couple of sample machines, use regedit to check the following registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall
This is the registry location where Windows records software installations, and this information is used for display of data in Add/Remove Programs (Programs and Features->Uninstall or change a program)
Browse through the various registry keys/values until you find the entry which relates to the software you want to uninstall.
Examine the registry value named "UninstallString" - this should be the command required for your goal.
Note that there may be multiple entries, depending upon the nature of the software, so check all the registry keys under the "Uninstall" key.
Perform a test uninstallation on a sample or test machine.
You could then write a script to perform the uninstallation. Many scripting methods provide remote-execution possibilities, or you may be able to use AD Group Policy startup-scripts or AD logon-scripts.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

How do you set up and work single image variations?

Howdy Forum,
My question is L4 workflow related.
As everyone else, I select an image file and fiddled about in the `Develop` mode until I am happy with the result which is great.
The modified image is in the catalog which is also great.
On other occasions I may wish to revisit the `original`image file and perhaps fiddle about for a different result to that above.
What or how is the best way set up a process for single image variations?
Should I simply be creating a few `copies` in advance on my hard drive, then import them in the usual way?
Cheers

Read up on virtual copies and history states

Using photoshop elements 13 but the option to crop a single image is grayed out and also the option to crop a scanned image into individual pictures is grayed out - any ideas?

The option to crop an image is always grayed out or unavailable - both for single images and when I want to crop scanned images into individual pictures. Any idea what I may be doing wrong?

Did you try using the crop tool to see if it is working? See the tool I am talking about.
I suspect you are in Guided Mode rather than in Quick Mode or Expert Mode.

Is there a way to use a single bitmapdata for multiple images with GPU mode?

With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData?
I have an app that runs in GPU mode - but I want to optimize the image management.
I am making three sets of images in the orders of 2048, 1024 and 512 px.
The app is a book app and each page has around 4 to 5 bitmaps. I would like to bring in one single image and slice it up - but just refer to the original bitMapData in the memory.
Is there a way to do this - e.g. using a masking technique?
I think it is possible using textures in direct mode - but that is not an ideal solution for me - as the app is already in the appstore - and I would have to entirely refactor it for stage3D. Also I use very large bitmaps which have some masking animations applied to them dynamically: http://youtu.be/Nm0T1jLCTz8?t=42s
Currently, I use jpgs and a jpeg mask file for each image which I composite to get the alpha - then I scale them.
PNGs may be better for GPU - (no compositing) but they make for a huge app file.
Now I am converting it to use diffent sized assets depending on the device, then scaling them if need, and then compositing them for apha. What I was hoping was to find a technique that could reduce the number of bitmapdata objects used and reduce the operations in general.
Any thoughts on optimizing would be appreciated. I can add my code here if it helps.

Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you.

How to export a whole process for a single image.

Good morning.
I would like to know how I can export a whole process for a single image. Is it possible? With that I can print of the way that goes better.
Thanks.

Hi Raghavendra,
Thanks for answering my query. I have created a transport request and exported the folder I need to take backup of. But when I tried testing import of the same request I am getting following error. Do you have any idea what is the cause of this error?
com.sap.security.core.server.destinations.itsam.DestinationRuntimeException: com.sap.security.core.server.destinations.api.DestinationException: [_DestinationServiceAuthorization1005] Code-based destination service access denied to component sap.com/cafeugpuiadmin. Access to security-relevant internal destination properties (e.g. passwords, tickets, etc.) is restricted to few selected engine components and not generally available to any service or application.
Kind Regards,
Urvashi

Needed: Lightbox like behaviour for single images

Similar Messages

Maybe you are looking for