Needed: Power Cord For AC Adapter 90W

In Brooklyn, NY, where can I get a USA standard power cord for a 90W 20V AC Adapter for a Lenovo T400 ?
The connection on the adapter brick looks like two overlapping circles.    I believe it may be what is commonly called the figure 8 connection.
Solved!
Go to Solution.

Radio Shack carries these cords.
 2-prong: Enercell™ 6-Ft. AC Power Cord (Black) Model: 61-210 | Catalog #: 61-210
3-prong: Enercell™ 6-Ft. 3-Wire Detachable AC Power Cord (Black) Model: 61-205 | Catalog #: 61-205
Cheers... Dorian Hausman
X1C2, TPT2, T430s, SL500, X61s, T60p, A21p, 770, 760ED... 5160, 5150... S360/30

Similar Messages

  • Need power cord for my Pavilion Entertainm​ent PC mod #dv6753cl

    Where can I get a power cord for 4 year old Pavilion Entertainment PC mod# dv6753cl?

    Hi,
    You need the power cord ONLY or the whole PSU ? Please try these for the whole unit:
      http://www.aliexpress.com/store/100504/201061498-2​85200129/Original-AC-Power-Adapter-Charger-for-HP-​...
      http://www.sparepartswarehouse.com/HP,Pavilion,dv6​700,KC424UA,Laptop,AC-Adapters.aspx
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Need Power Cord For Old Nomad Jukebox, PLE

    I need the a.c power cord, it is a 9v cord and I can really use one, Any help ?
    Please email if you have one, THANKS !!

    i think that will be pretty hard to come by.
    try ebay you may be able to get one.
    but if you cant...
    go out and get yourself a REGULATED multivoltage power supply.
    you know, those battery elimators with the 8 or so interchangeable plugs.
    if its not regulated you run the risk of putting too much power into your jukebox.
    just make sure it has a plug that fits your jukebox and you match up the polarity then your set.
    go for something with at least a amp output however.
    go for more then that if you can...
    good luck

  • USA iMac model A1224 needs power cord for Belgium

    Hello,
    I have a US iMac Model A1224 I need a power cord that will work in Belgium.  My power cord has a tag that reads: 10A 125V~ .  Will any power cord work, a friend in Amsterdam has a cable with the same interface as my iMac with the European wall mont  (2 round prongs)... Will this work or do I need to look at the voltage settings? 
    Help, Please and THANK YOU.

    Newer Mac models switch voltage automatically.  What does it say after the "125-"?  Probably 220 or 240V.  All you need in that case is a European plug or an adaptor for a US plug ( you can get them in the travel section of any department store or they are easily found in Europe) .

  • I went to the apple store to get a power cord for my husband's mac pro and the technician gave me a power adapter instead. My husband has a conference call before the stores open and I can exchange the adapter but he needs power for his computer before th

    My husband needs a new power cord for his Mac Pro. I went to the apple store and the clerk gave me a power adapter by mistake. He has a conference call before the store opens and I can't get him another power cord. Is there a way to power up his computer?

    You posted in the MacBookPro forum. Is this a Mac Pro or MacBook Pro? If it's the latter, it has a battery.

  • Need power schematics for a 20" cinema display a1038 (four pronged cord)

    need power schematics for a 20" cinema display a1038
    missing the power adapter for the cinema display,need to know what the leads are for the power cord.
    There is a Edison power cord that plugs into a little square box, then a 4 pronged cord plugs into that box.
    I have a 24 volt power supply with the same amps, and want to hook it up to the 4 pronged plug since I don't have the little power supply box. I don't know what each lead is.
    The easy answer is to buy the power supply. I bought the cinema display cheap and want to see if its worth buying the little box power supply that costs around 70$ on e-bay. If it works with the 24 volt power supply Ill go ahead and buy the little box.

    Hi
    If the monitor is a clear acrylic model with three feet (which it seems to be), and your computer is an original AGP Graphics/Sawtooth model, you'll need a DVI to ADC adapter.
    You can identify your exact computer model from the following link:
    http://docs.info.apple.com/article.html?artnum=58418
    The ADC connector, which the older 20" Cinema Display uses, wasn't introduced until the later Gigabit Ethernet models. Unfortunately a newer graphics card with an ADC port won't work either, as the Sawtooth lacks an extra connector on the logic board required to power the monitor through the ADC cable.
    DVI to ADC adapters are fairly expensive as they include an integral power supply to drive the monitor. It may also be worth checking your graphics card supports the resolution of the 20" display (1680 by 1050). In the worst case you may need a new graphics card (with a DVI port) and the adapter.

  • I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    Are you in the US? Order one from here:  http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
    Or check out Best Buy.

  • I need a power cord for a sony CFD-G700CP

    I need a power cord for a Sony boombox CFD-G700CP.  Where can I purchase one.

    The power cord of the CFD-G700CP Boombox is no longer available at our Parts Center. You may check for it from any of our Authorized distributors below: 
    Andrews Electronics Inc.
    1-800-289-0300
    www.andrewselectronics.com
    Encompass Parts Distribution
    1-800-638-3328
    www.encompassparts.com
    Fox International
    1-800-321-6993
    www.fox-international.com
    Union Electronics
    1-800-648-6657
    www.ued.net
    If my post answers your question, please mark it as "Accept as Solution"
    http://bit.ly/Win-4K

  • DC power cord for T60 power adapter 92P1109

    Does anyone know where I can purchase a DC power cord for my T60 AC/DC power adapter (92P1109}? I have lost mine and do not want to purchase a completely new adapter. Thanks.

    The part numbers for the power cord itself can be found here. You might be able to find that FRU for purchase online, but the easiest way is to call IBM Spare parts. Info about that is here.
    Tim Supples
    Lenovo Social Media
    Got a question? Don't PM me, post it on the forum!
    Lenovo Blogs
    X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

  • I need to purchase a power cord for my intel based 27" iMac.  I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

    I need to purchase a power cord for my intel based 27" iMac.  I have had it for almost 2 years, I don't have apple care and I don't want to take it in to the genius bar. I know it's the power cord and I just want to purchase one.

    iMacs take generic power cords. If it fits into the back of the iMac and an electrical socket, it'll work.
    Good luck.
    Dr. C.

  • HT201897 Does a Mac Mini purchased in the USA require a power converter for operation in Europe or should I only purchase a different power cord for it?

    Does a Mac Mini purchased in the USA require a power converter to operate outside of the USA or can I simply purchase a different power cord for it?

    Depending on which European country (should their mains access plug/port shape vary) the
    cord set with correct ends on it has to match. You can buy a cord that plugs into the Mini
    where the factory cord goes, and the other end has one for the wall source shape. The wire
    for the application should be able to support 110~240VAC.
    With the cord or an accurate image in hand, you could either get a new cable to match both
    realities (mini + wall supply mains local) or an adapter (US/Standard to EU/Local) for just
    the head or input part of the original Apple cable. One plugs into the other, then into wall.
    If you have a new Mini with a small modular plug/port on the computer end of the power wire,
    it would have only two holes and no ground; the other end would have two prongs of equal
    shape and size. Not a polarized plug and not a grounded three-prong. To get a replacement
    power wire for the MINI to go from power source to the Mini is recommended, if you are going
    to be staying in one location for awhile. A Travel Kit that offers no electrical conversion but only
    the physical shape adapter kit, should a available in travel stores, airports; big box discount
    stores, computer and electronic stores. This page shows the cord end of the appliance shapes.
    The other end would be the mains shape for whichever country you are going to....
    http://www.signalandpower.com/European-Power-Cords/
    So to match the country or regional power mains type is a primary concern for obtaining the
    correct replacement cord to supply the Mini with local mains power. The end which plugs into
    the Mini is of a certain type (numbers for EU and elsewhere are published, see link + images)
    & the end that gets plugged into the mains or utility side, needs to match the local specification.
    The link to Apple, to contact for Support and Service information in prior post, should be able
    to help find a source for the local replacement type cord they'd sell local people with a Mini.
    Apple local sources offer replacements for this purpose; and for travelers, a second cord for
    a direct use (not adapter plugs) is a better bet. For those who only need a cord in two places.
    If you are traveling to Denmark, UK, Swiss or other EU countries require different adapters.
    Even places where the power itself may be somewhat similar. However your MINI has an
    automatic power supply that will conform to that energy standard, you only need to supply a
    correct non-transforming adapter. Simply a connection to adapt one shape to another.
    The general purpose travel kit that is not specialized to Apple power adapters, would have a
    plastic plug/adapter with the local pins on one side, and the US/standard two slots on the other.
    So, no circuitry nor any other change of electrical power inside this device would be required.
    http://www.signalandpower.com/2-Prong-Plug-Adapters/
    http://www.signalandpower.com/Convert-to-Europe-CEE-716-plug/
    http://www.signalandpower.com/Swiss-AC-Power-Cords/
    In other words, I believe my other post already covered this. On the ground on either end of the
    path, adapters are common and the Mini does not use proprietary electrical components IF you
    have one of the more recent shape aluminum models with the power supply built in. The older
    Mini has the power brick and two wires. A US/Standard plug adapter to EU/Local would work in
    either case, since all you'd do is plug the adapter plug into the local mains and the US plug into
    that one... I see these kinds of discards for as little as 25¢ in thrift stores in Alaska. Or you can
    buy a new one. Or you could get a complete cord with correct ends on it, for Mini + local mains.
    Hopefully this helps somewhat. The only info missing is which EU country or region is involved.
    Their shapes of plug are different, so the adapter end for local supply has to match their standard.
    Swiss, Denmark, UK, and others offer different shapes and so on.
    The Apple store in the location you are traveling should be able to supply you with a replacement
    cable for a modern MINI, that has the correct local mains end, and the correct Apple mini end on
    the opposite. Since the unit is automatically switching, the magic is done.
    Since I supplied a means to locate any number of Apple stores, authorized service providers &
    other Apple related vendors in my earlier reply: https://locate.apple.com/country you could contact
    any of them along your route in the City in whichever EU country, to find a local MINI power cable.
    In any event, I'm done...
    Good luck and happy trails...

  • Power Cord for Italy/Europe?

    Hi folks. I have the 85w AC adapter with the power cord for the US.
    I realize I can get an adapter for the plugs in Italy, but I was wondering if I could order the AC cord that goes from the wall to the adapter.
    Basically I'm looking for the Euro version of 922-5463 AC Adapter Power Cord.
    This isn't a huge priority, since I have the world travel kit and a set of adapters, but I figure since I'll be travelling alot (if I get the job) it might be a good idea to have the native cord rather than constantly use adapters.
    I'd also like to keep the machine grounded as often as possible. The travel set doesn't appear to support grounding.

    Nevermind, I found what I needed on eBay.
    I went to eBay's Italian portal and searched for AC cord un the Apple section.

  • Power cord for 9216i

    I have a customer looking for a replacement power cord for a 9216i.
    We need a cord with a C15 female end with a notch in it on one end and the hooded connection C14 connector on the other.
    Do we have such a cord available?

    The hooded C14 is an IEC cable. If you look in the list you will see that No IEC cables are available for purchase.
    The list of supported cables is available here -
    http://www.cisco.com/univercd/cc/td/doc/product/sn5000/mds9000/9200_hig/portcabl.htm#wp1058250
    You have Three options.
    1. Get a pdu that matches your available power cable choices.
    http://www.apc.com
    2. have a custom cable made
    http://www.cypressindustries.com/products/power.html
    3. use an adapter - note if you do, please make sure that the cable in the middle supports the needed amperage.
    http://www.stayonline.com/searchresult.aspx?categoryid=2317
    If you find this helpful, please rate it.
    --Colin

  • Where can I get a replacement power cord for my 13" Mac book, Where can I get a replacement power cord for my 13" Mac book

    Where can I get a replacement apple charger/power cord for my 13" Mac book?

    here are some examples: https://www.google.com/#q=macbook+magsafe+adapter&hl=en&prmd=imvns&source=univ&t bm=shop&tbo=u&sa=X&ei=i6nhTrvTO6q22gWIpuTcBA&sqi=2&ved=0CHkQrQQ&bav=on.2,or.r_gc .r_pw.r_cp.,cf.osb&fp=e0f7ed75ce37ea0c&biw=1280&bih=679

  • Power cords for older hardware?

    Hi,
    Anyone know where I can get power cords for
    a PowerMac G3 (beige short desktop) and
    an Apple Multiple Scan 15 AV Display?
    Willing to pay a fair price!
    Thanks in advance,
    --Prahas

    The Beige G3 uses a generic , 3-conductor power cord that is available new and for cheap. I believe the monitor uses the same type. Some of the 16 Macs in our family have old power cords salvaged from dead PC computers. They are interchangeable
    Like this:
    Micro Accessories 6' Power Cord connects Computer or AC Adapter to wall outlets - US/North America

Maybe you are looking for

  • How to populate the whole path of the button in a field when the button is clicked.

    Hi, I have around 5 uploads in my file. I kept a hidden field on the header of the form. When ever i click on the upload button, the path of it needs to be populated in the hidden text field. by using   this.parent we can get the parent name of the e

  • Driver program for the Dunning letter SAP Script

    Hello All, Can someone please tell me how to find the "Driver program for the Dunning letter SAP Script". I checked the Transaction OB96 but I dont find any Dunning scripts here i.e., the standard Dunning letter SAP Script F150_DUNN_01. Is there any

  • ERROR while checking standard program for SAP NOTE 175482(QM)

    HI, experts i am implementing sap note 175842 QM MODULE . My note is successfully implemented ,for that i created standard program RQEVAC50 USING ACCES KEY. but in se38 report comes like this REPORT  RQEVAC50. REPORT RQEVAC50 MESSAGE-ID QA. so while

  • Problem with TOC pages and books

    I'm using RH 8 and generate Webhelp. I created a project and had to change some TOC pages and create TOC books instead. I deleted the pages and added books, with the same name. In RH it looks fine but when I generate the TOC displays the page instead

  • Music files are skipp

    I just reformatted my computer with Win XP SP yesterday and I decided to wait a bit before I install my sound drivers. BTW, I am using a 2-3 year old Audigy Gamer sound card (can't remember exactly when I bought it). So I first try using the CD that