Needed urgent help for user creation in security manager in ODI 11g
Hi Gurus,
I have an urgent requirement in ODI security manager and i am completely helpless. We need specific steps for the user creation with sufficient priviledges. The detailed requirements are:
1. There is a group of users under the framework team and these users should be able to edit the Knowledge modules only. All other objects (e.g. projects, interface, procedures or development related objects) should only be in read only mode for them.
2. There is a group of users under the development team. The priviledges of these users should be mutually exclusive to that of the framework team users. i.e. the development team should be able to edit or delete all development related objects (e.g. projects, interface, proc etc.) but the knowledge modules should only be in read only mode for them.
Now I will explain what i have tried out:
I am working on ODI 11.1.1.5.
I have created a user with NG DESIGNER and CONNECT profile. Dragged and dropped all the projects on the user and selected all methods in all repositories (check sign). However when i connect with that user i cannot open the KMs (as far as development team is concerned its fine) but i can also not open interfaces as well as procedures (which is not acceptable from development point of view).
Also when i tried creating a user from the framework team point of view i could not see any option related to KMs (To give edit priviledge).
Please help me out guys. I have also searched oracle documentation and believe me the security manager section is not very good. If you guys can help me out with specific steps it would be great (I have tried the hints given in oracle documentation and they dont work, the ODI security manager behaves strangely :-(
Thanks in advance,
SB
Similar requirement here guys. Any pointers. I was able to achieve this by restricting development user from supervisor access. In that case the development user can not edit the interfaces. Any known defefct?
Similar Messages
-
Need urgently help for OBIEE Installation (11g)
Hi all,
I am having problems trying to install Oracle Business Intelligence 11g on Windows 7.
The Installation Wizard hangs on the step: Domain Configuration (0%). The Creating Domain shows In progress.
The log under the Inventory directory shows me only following:
INFO: Ending the inventory Session
INFO: Using an existing InstallAreaControl for this Inventory Session with existing access level 1
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
INFO: The ORACLE_CONFIG_HOME env var is set to
I really don't know what to do. I am searching for a solution on Internet, but I don't find it.
I need urgently help. I would appreciate someone could help me.
We can do together via Webex or something similar. It doesnt worth it for me to type here and wait till someone give me an answer (if any), trying to find out how I did.
I hope to find the help I need. I am desperated :-(Can I install the OBIEE 10g version?I am not sure but i think OBIEE is not certified with windows 7. i could not find any MOS doc confirming same. Please log a call with oracle to confirm this.
would it work fine with the Oracle Database 11g and the RCUs?. Yes OBIEE 10g will work with oracle database 11g.
Thanks,
JD -
Help for user creation for Webshop
Hi ,
I am working on SAP CRM 2007 Ecommerce. I want to log into the webshop.
Please help me with the procedure for creation of users to log into the webshop.
Regards,
SumitHi Sumit,
I think it should be the same one for shopadmin/admin/xcm/init.do, XCM user.
The XCM user is the J2EE visual admin user. J2EE guys know how to create this user based on relevent document, and this has to be done on J2EE server. :P
Usually, the default user is Administrator with password blank. It maight be different for each J2EE version.
Hongyan -
Need urgent Help for Kernel upgrade......
Hi Gurus,
I have recently upgraded SAP kernel from Release 6.40 Patch 109 to Release 6.40 Patch 175. My System is SAP ERP Central Component 5.0 and Release is 6.40 and Kernel Stataus is showing below details:
Kernel release 640
Compilation SunOS 5.8 G
Patch Level 175
ABAP Load 1521
CUA load 16
Mode opt
~
I have total 8 Application servers. today I have genereated EWA report and in that report, for SAP kernel section it has reported that <b>"You are running different SAP kernel releases on your instances. This situation may lead to severe problems and is not supported by SAP.
Recommendation: Use only one kernel release for all instances."</b>
Actaully I have updated kernel in my central instance (/sapmnt/<SID>/exe) and this directory is NFS mount in all the application server. So I am not sure why the SAP EWA is repoting this that you are running difference SAP Kerenl release.
If this is correct then how to rectify it ? what action I need to take to resolve this ?
Appreciate your help.
Thanks & Regards
BasisI will plan to do that as early as possible. Even I
am going to write to SAP to release that note in
english for better understanding.
yes - that note should be translated giving the importance.
My question is: Am I on HIGH ALERT for this issue ?
Since it is production server, will it going to
affect my system in any aspect ??
No, you will just see a slightly higher usage of "nfsd" when you start the application servers for the first time since they will all copy parts of the kernel locally.
2nd thing, This is applicable only to NW ? Because I
have upgraded SAP Kernel to Patch 175 to other R/3
system having more application server, but I didn't
get this comment in my EWA report ?
The comment isn´t related to to usage of sapcpe. The comment means, that you have at least one application server, that uses local binaries with a different patchlevel instead of those on the central instance. I would consider that more critical. Maybe you installed one of the servers later and used a newer installation CD set which creates that new structure for using sapcpe by default... don´t know, just a guess. To check, go to SM51 and select each server and press on "Release Information", you will see which one is affected.
This week I am planning to upgrade kernel for 4.6D
release to Patch 2307. Will this be gona issue for
that also ?
Kernels lower than 6.10 use a different approach (the "ctrun directory" mentioned in that note) - technically it´s the same. The installation guides for 4.6c should tell you how to set that up.
Markus -
Need urgent Help for setting up iCal Server
I will move the iCal portion here, maybe I will get some help.
Okay first my setup:
Two XServe with the latest 10.5 (one is the backup)
Six Mac Pros with Leopard
Three Macbook Pros with Snow Leopard
All Macs are on an Windows 2003 Active Directory network. Also we have our accounts locally (on each workstation and laptop).
*So I have installed the advanced settings for the Server OS.
*Created a account for every user on the server
*The FTP, Web (for the local webpage), Open Directory and iCal services are on. (iCal would only activate with Open Directory service??)
*The iCal server destination (for the calendars) are on a separate drive with +Ignore Permissions+
Still can not link a account through iCal with the server!
Could somebody give me a walkthrough how to setup the iCal server?
Oh yeah another issue I had I can't get the calendaring checkbox in the user account to stick! Is this just a bug?Hi Umesh,
I would not use the repository on a database that was cloned. In my experience this leads to problems.
A better way is to clone the database and then create a new repository on the clone:
1. export the repository on the windows server to an mdl file
2. unregister all target users on solaris
3. drop the repository on solarais
4. create a new repository on solaris
5. Import the data from the mdl file you exported in step 1
6. register target users
7. configure and register the locations
This way requires some manual work, but I do not see another way.
Regards,
Carsten. -
I need urgent help for the logic
hi all,
Initially, the requirement was to create PO regardless the Purchase Requisition based on the formula
If (Open Qty + Current Stock) < Safety Stock ==>> THEN A PO NEEDS TO BE CREATED
This is absolutely fine, this created the PO as per the above condition.
OUR REQUIREMENT
Modify the same program to create PO's only if there is any PR for that material . Meaning, turn all the PR's into PO. Also, when creating PO, the delivery date should be = (Current date - 7 days) when creating a PO for an PR(I think the table name is VETVG.) Nothing else. We need to change the IF condition in the following code .
so can any one let me that what modification i need to do ie what logic i should use to get the requirement fullfilled.
*Report Z_STO_SAFETY_STOCK *
Program Name : Z_STO_SAFETY_STOCK *
Date : 09.03.2007 *
Programmer : Rajdeep Kumar
Last Change : Van Tran 22/03/2007 *
Specification: *
Program Type : Report *
Description : Create STO requirement for Plant
Transaction : None *
Input Files : None *
Output Files : None *
Scheduling Issues : *
Run Frequency : *
Mod# Date By Description *
New 09.03.2007 Rajdeep Kumar Created *
DEVK905890 *
M01 20.03.2007 Rajdeep Kumar Material Group Added to *
DEVK905892 Selection Screen *
*Update 05.04.2007 DEVK906082 Added two new selection *
fields beskz and sobsl *
and is select statement *
REPORT z_sto_safety_stock NO STANDARD PAGE HEADING.
*& TABLES
TABLES:
t001w,
marc. " M01
marc, " M01
mara. " M01
*& DATA DECLARATION
DATA: BEGIN OF it_marc OCCURS 0,
matnr LIKE marc-matnr,
werks LIKE marc-werks,
eisbe LIKE marc-eisbe,
bstmi LIKE marc-bstmi,
bstrf LIKE marc-bstrf,
beskz LIKE marc-beskz,
sobsl LIKE marc-sobsl,
END OF it_marc.
DATA: BEGIN OF it_mard OCCURS 0,
matnr LIKE mard-matnr,
werks LIKE mard-werks,
labst LIKE mard-labst,
END OF it_mard.
DATA: BEGIN OF it_po OCCURS 0,
ebeln LIKE ekko-ebeln,
werks LIKE ekpo-werks,
ebelp LIKE ekpo-ebelp,
loekz LIKE ekpo-loekz,
etenr LIKE eket-etenr,
matnr LIKE ekpo-matnr,
menge LIKE eket-menge,
wemng LIKE eket-wemng,
END OF it_po.
DATA: BEGIN OF it_po_2 OCCURS 0,
matnr LIKE ekpo-matnr,
werks LIKE ekpo-werks,
ebeln LIKE ekko-ebeln,
ebelp LIKE ekpo-ebelp,
loekz LIKE ekpo-loekz,
etenr LIKE eket-etenr,
menge LIKE eket-menge,
wemng LIKE eket-wemng,
END OF it_po_2.
DATA: BEGIN OF it_po_pend OCCURS 0,
matnr LIKE ekpo-matnr,
werks LIKE ekpo-werks,
pendi LIKE eket-menge,
END OF it_po_pend.
DATA: BEGIN OF wa_join OCCURS 0,
ebeln LIKE ekko-ebeln,
werks LIKE ekpo-werks,
ebelp LIKE ekpo-ebelp,
loekz LIKE ekpo-loekz,
etenr LIKE eket-etenr,
matnr LIKE ekpo-matnr,
menge LIKE eket-menge,
wemng LIKE eket-wemng,
END OF wa_join.
DATA : BEGIN OF itab_marc_mard OCCURS 0,
werks LIKE marc-werks,
matnr LIKE marc-matnr,
eisbe LIKE marc-eisbe,
bstmi LIKE marc-bstmi,
bstrf LIKE marc-bstrf,
beskz LIKE marc-beskz,
sobsl LIKE marc-sobsl,
labst LIKE mard-labst,
menge LIKE ekpo-menge,
ordqty LIKE ekpo-menge,
END OF itab_marc_mard.
DATA: BEGIN OF it_sto OCCURS 0,
werks LIKE mard-werks,
matnr LIKE mard-matnr,
orqty LIKE ekpo-menge,
eisbe LIKE marc-eisbe,
bstmi LIKE marc-bstmi,
bstrf LIKE marc-bstrf,
beskz LIKE marc-beskz,
sobsl LIKE marc-sobsl,
labst LIKE mard-labst,
pendi LIKE eket-menge,
END OF it_sto.
DATA: ws_poheader LIKE bapimepoheader.
DATA: ws_poheaderx LIKE bapimepoheaderx .
DATA: ws_ebeln TYPE mepoheader-ebeln.
DATA: ws_posnr LIKE ekpo-ebelp.
DATA: ws_etenr LIKE eket-etenr VALUE '0001'.
DATA: ws_purchaseorder LIKE ekko-ebeln.
DATA: ws_flg1 TYPE c. " VALUE 'X'.
DATA: ws_flg2 TYPE c.
DATA: ws_flg3 TYPE c.
*-- For Handling Error Messages in BAPI
DATA: tbl_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
*-- For Item Details
DATA: tbl_poitem LIKE bapimepoitem OCCURS 0 WITH HEADER LINE.
DATA: tbl_poitemx LIKE bapimepoitemx OCCURS 0 WITH HEADER LINE.
DATA: tbl_posched LIKE bapimeposchedule OCCURS 0 WITH HEADER LINE.
DATA: tbl_poschedx LIKE bapimeposchedulx OCCURS 0 WITH HEADER LINE.
*& CONSTANTS
CONSTANTS: ws_flg TYPE c VALUE 'X'.
CONSTANTS: c_unistruct(2) TYPE c VALUE 'Z3'. "For UNISTRUCT STO
*& SELECTION-SCREEN
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_werks FOR t001w-werks,
s_matnr FOR marc-matnr. " M01
s_matnr FOR marc-matnr, " M01
s_matkl FOR mara-matkl, " M01
s_beskz FOR marc-beskz,
s_sobsl FOR marc-sobsl.
PARAMETERS: p_test TYPE check.
SELECTION-SCREEN : END OF BLOCK b1.
*& START OF SELECTION EVENT
START-OF-SELECTION.
Get the Safety Stock & Minimum Lot Size for the materials
PERFORM get_plant_data.
Get the Quantities in stock
PERFORM get_stock_data.
Determine the open quantities for the materials concerned
[EKKO, EKET, EKPO]
PERFORM get_open_quantities.
PERFORM open_quantities.
Determine overall the quantities required for each material
PERFORM determine_mat_qty_required.
Print the details
PERFORM print_details.
IF p_test EQ space.
PO is created for each plant.
Create the PO required.
PERFORM create_po.
Create the PO's for each plant with the materials required
PERFORM create_header_item.
Bapi call to create a Purchase order
PERFORM create_purhase_order.
ENDIF.
END-OF-SELECTION.
TOP-OF-PAGE.
PERFORM print_header.
*& Form get_plant_data
To get the Safety Stock
--> p1 text
<-- p2 text
FORM get_plant_data .
start " M01
SELECT matnr werks eisbe bstmi
INTO TABLE it_marc
FROM marc
WHERE matnr IN s_matnr AND
werks IN s_werks AND
eisbe GT 0.
end " M01
start " M01
SELECT marc~matnr werks eisbe bstrf beskz sobsl
" bstmi
INTO TABLE it_marc
FROM marc AS marc
INNER JOIN mara AS mara
ON maramatnr EQ marcmatnr
WHERE marc~matnr IN s_matnr AND
werks IN s_werks AND
matkl IN s_matkl AND
beskz IN s_beskz AND
sobsl IN s_sobsl AND
eisbe GT 0.
end " M01
ENDFORM. " get_plant_data
*& Form get_stock_data
To get the Current Stock
--> p1 text
<-- p2 text
FORM get_stock_data .
DATA: BEGIN OF lt_mard OCCURS 0,
matnr LIKE mard-matnr,
werks LIKE mard-werks,
lgort LIKE mard-lgort,
labst LIKE mard-labst,
END OF lt_mard.
CHECK NOT it_marc[] IS INITIAL.
SELECT matnr werks lgort labst
INTO TABLE lt_mard
FROM mard
FOR ALL ENTRIES IN it_marc
WHERE matnr EQ it_marc-matnr AND
werks EQ it_marc-werks.
SORT lt_mard BY matnr werks.
LOOP AT lt_mard.
AT NEW werks.
it_mard-matnr = lt_mard-matnr.
it_mard-werks = lt_mard-werks.
ENDAT.
it_mard-labst = it_mard-labst + lt_mard-labst.
AT END OF werks.
APPEND it_mard.
CLEAR it_mard.
ENDAT.
ENDLOOP.
ENDFORM. " get_stock_data
*& Form open_quantities
text
--> p1 text
<-- p2 text
FORM open_quantities .
Storing MARC and MARD data in an internal table to find the open
quantities
LOOP AT it_marc.
itab_marc_mard-matnr = it_marc-matnr.
itab_marc_mard-werks = it_marc-werks.
itab_marc_mard-eisbe = it_marc-eisbe.
itab_marc_mard-bstmi = it_marc-bstmi.
itab_marc_mard-bstrf = it_marc-bstrf.
itab_marc_mard-beskz = it_marc-beskz.
itab_marc_mard-sobsl = it_marc-sobsl.
READ TABLE it_mard WITH KEY matnr = it_marc-matnr.
IF sy-subrc EQ 0.
itab_marc_mard-labst = it_mard-labst.
ENDIF.
APPEND itab_marc_mard.
CLEAR itab_marc_mard.
ENDLOOP.
CHECK NOT itab_marc_mard[] IS INITIAL.
Join EKKO EKPO
SELECT a~ebeln
b~ebelp
b~werks
b~matnr
b~menge
c~etenr
c~wamng
INTO CORRESPONDING FIELDS OF TABLE it_po
FROM ekpo AS b
INNER JOIN ekko AS a
ON aebeln = bebeln
INNER JOIN eket AS c
ON bebeln = cebeln AND bebelp = cebelp
FOR ALL ENTRIES IN itab_marc_mard
WHERE b~matnr = itab_marc_mard-matnr AND
b~werks IN s_werks .
DATA : t_menge TYPE ekpo-menge . "local variable
*Store the contents of it_po to the work area to get the minimum order
*quantity
wa_join[] = it_po[].
LOOP AT it_po.
delete the entries where MENGE = WAMNG
DELETE it_po WHERE menge = it_po-wemng.
LOOP AT wa_join WHERE matnr = it_po-matnr
AND werks = it_po-werks.
t_menge = t_menge + wa_join-menge.
ENDLOOP.
it_po-menge = t_menge.
MODIFY TABLE it_po TRANSPORTING menge.
CLEAR :t_menge.
ENDLOOP.
Once you get the quantities delete the repeating materials for the
plant.
DELETE ADJACENT DUPLICATES FROM it_po COMPARING werks matnr.
SORT it_po BY matnr.
LOOP AT itab_marc_mard.
READ TABLE it_po WITH KEY matnr = itab_marc_mard-matnr
APPEND it_sto.
ELSE.
WRITE:/ 'There are no open quantities to create Purchase order'.
ENDIF.
CLEAR it_sto.
ENDLOOP. werks = itab_marc_mard-werks BINARY
SEARCH.
itab_marc_mard-ordqty = itab_marc_mard-labst + it_po-menge .
If Open quantiy + Current Stock < Safety Stock
IF itab_marc_mard-ordqty LE itab_marc_mard-eisbe.
Minimum order qty = Safety Stock - (Open qty + current stock)
itab_marc_mard-ordqty = itab_marc_mard-eisbe - ( it_po-menge +
itab_marc_mard-labst ) .
Move all the contents to the internal table it_sto ie Plant,
Material and the Min Order Qty
so that we can create PO based on this internal table
it_sto-matnr = itab_marc_mard-matnr.
it_sto-werks = itab_marc_mard-werks.
it_sto-orqty = itab_marc_mard-ordqty.
ENDFORM. " open_quantities
*& Form CREATE_HEADER_ITEM
text
FORM create_header_item.
LOOP AT it_sto.
*--- Document date with flag
ws_poheader-doc_date = sy-datum.
ws_poheaderx-doc_date = ws_flg.
*--- Document type with flag
ws_poheader-doc_type = 'Z3'(c01).
ws_poheaderx-doc_type = ws_flg.
*--- Purchasing group with Flag
ws_poheader-pur_group = '005'. " hardcoded
ws_poheaderx-pur_group = ws_flg.
*--- Purchasing Organization with flag
ws_poheader-purch_org = '2000'.
ws_poheaderx-purch_org = ws_flg.
*--- Supply plant with flag
ws_poheader-suppl_plnt = '2000'.
ws_poheaderx-suppl_plnt = ws_flg.
*--- Company Code with flag
ws_poheader-comp_code = '2000'.
ws_poheaderx-comp_code = ws_flg.
*<--- assinging new item No.
ws_posnr = ws_posnr + 10.
*POPULATE ITEM DATA.
tbl_poitem-po_item = ws_posnr.
tbl_poitem-material = it_sto-matnr.
tbl_poitem-item_cat = 'U'(c02).
tbl_poitem-plant = it_sto-werks.
tbl_poitem-quantity = it_sto-orqty.
APPEND tbl_poitem.
CLEAR tbl_poitem.
*POPULATE ITEM FLAG TABLE
tbl_poitemx-po_item = ws_posnr.
tbl_poitemx-po_itemx = ws_flg.
tbl_poitemx-material = ws_flg.
tbl_poitemx-plant = ws_flg.
tbl_poitemx-item_cat = ws_flg.
tbl_poitemx-quantity = ws_flg.
APPEND tbl_poitemx.
CLEAR tbl_poitemx.
ENDLOOP.
ENDFORM. "CREATE_PO
*& Form
text
--> p1 text
<-- p2 text
FORM create_purhase_order .
CLEAR: tbl_poitem,
tbl_poitemx,
ws_poheader,
ws_poheaderx.
REFRESH: tbl_poitem,
tbl_poitemx.
CLEAR : tbl_return.
REFRESH: tbl_return.
*<--- Bapi to create Purchase order
IF NOT tbl_poitem[] IS INITIAL.
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = ws_poheader
poheaderx = ws_poheaderx
IMPORTING
exppurchaseorder = ws_purchaseorder
TABLES
return = tbl_return
poitem = tbl_poitem
poitemx = tbl_poitemx.
READ TABLE tbl_return WITH KEY type = 'E'.
*<--- Bapi to commit the changes
IF sy-subrc <> 0.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
ENDIF.
LOOP AT tbl_return.
*<--- Ignore the warning messages
IF tbl_return-type = 'W'.
CONTINUE.
ENDIF.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
IF tbl_return-type = 'S'.
FORMAT COLOR COL_POSITIVE ON.
ELSEIF tbl_return-type = 'W'.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
ELSEIF tbl_return-type = 'E'.
FORMAT COLOR COL_NEGATIVE INTENSIFIED OFF.
ENDIF.
WRITE:/3 tbl_return-type,12 tbl_return-id,20(85) tbl_return-message
86(10) tbl_return-field,95(20) tbl_return-system.
FORMAT COLOR OFF.
ENDLOOP.
ENDFORM. " create_purhase_order
*& Form get_open_quantities
text
--> p1 text
<-- p2 text
FORM get_open_quantities .
CHECK NOT it_mard[] IS INITIAL.
SELECT ekkoebeln ekpoebelp ekpowerks ekpomatnr
ekpomenge eketetenr eket~wemng
INTO CORRESPONDING FIELDS OF TABLE it_po
FROM ekko AS ekko
INNER JOIN ekpo AS ekpo
ON ekpoebeln EQ ekkoebeln
INNER JOIN eket AS eket
ON eketebeln EQ ekpoebeln AND
eketebelp EQ ekpoebelp
FOR ALL ENTRIES IN it_mard
WHERE ekko~bstyp EQ 'F' AND
ekko~bsart EQ 'Z3' AND
ekko~bsakz EQ 'T' AND
ekko~loekz EQ space AND
ekpo~matnr EQ it_mard-matnr AND
ekpo~werks EQ it_mard-werks AND
ekpo~loekz EQ space AND
ekpo~elikz EQ space.
SORT it_po BY ebeln ebelp etenr.
delete entries where the schedule is complete, else copy to new table
LOOP AT it_po.
IF it_po-wemng GE it_po-menge.
DELETE it_po.
ELSE.
MOVE-CORRESPONDING it_po TO it_po_2.
APPEND it_po_2.
CLEAR it_po_2.
ENDIF.
ENDLOOP.
SORT it_po_2 BY matnr werks.
To determine the pending quantities of the materials at plant level
LOOP AT it_po_2.
AT NEW werks.
it_po_pend-matnr = it_po_2-matnr.
it_po_pend-werks = it_po_2-werks.
ENDAT.
it_po_pend-pendi = it_po_pend-pendi + it_po_2-menge - it_po_2-wemng.
AT END OF werks.
APPEND it_po_pend.
CLEAR it_po_pend.
ENDAT.
ENDLOOP.
ENDFORM. " get_open_quantities
*& Form determine_mat_qty_required
text
--> p1 text
<-- p2 text
FORM determine_mat_qty_required .
DATA: lv_eisbe LIKE marc-eisbe,
lv_labst LIKE mard-labst,
lv_menge LIKE eket-menge,
lv_bstmi_old LIKE marc-bstmi,
lv_bstrf_old LIKE marc-bstrf,
lv_beskz_old LIKE marc-beskz,
lv_sobsl_old LIKE marc-sobsl,
lv_pendi LIKE eket-menge,
lv_total_conf LIKE ekpo-menge,
lv_bstmi LIKE marc-bstmi,
lv_min_qty LIKE marc-bstmi,
lv_bstrf LIKE marc-bstrf,
lv_min_qty LIKE marc-bstrf,
lv_qty_req LIKE mard-labst,
lv_remainder TYPE i.
LOOP AT it_marc.
safety stock
lv_eisbe = it_marc-eisbe.
lv_bstmi_old = it_marc-bstmi.
lv_bstrf_old = it_marc-bstrf.
lv_beskz_old = it_marc-beskz.
lv_sobsl_old = it_marc-beskz.
READ TABLE it_mard
WITH KEY matnr = it_marc-matnr
werks = it_marc-werks
BINARY SEARCH.
IF sy-subrc EQ 0.
qty onhand
lv_labst = it_mard-labst.
ELSE.
CLEAR lv_labst.
ENDIF.
READ TABLE it_po_pend
WITH KEY matnr = it_marc-matnr
werks = it_marc-werks
BINARY SEARCH.
IF sy-subrc EQ 0.
PO pending qty
lv_pendi = it_po_pend-pendi.
ELSE.
CLEAR lv_pendi.
ENDIF.
Total qty on hand & PO qty pending
lv_total_conf = lv_labst + lv_pendi.
Now determine if a PO is required for the material concerned.
IF lv_total_conf < lv_eisbe.
it_sto-matnr = it_marc-matnr.
it_sto-werks = it_marc-werks.
it_sto-eisbe = lv_eisbe.
it_sto-bstmi = lv_bstmi_old.
it_sto-bstrf = lv_bstrf_old.
it_sto-beskz = lv_beskz_old.
it_sto-sobsl = lv_sobsl_old.
it_sto-labst = lv_labst.
it_sto-pendi = lv_pendi.
Actual Qty Required
lv_qty_req = lv_eisbe - lv_total_conf.
IF it_marc-bstmi IS INITIAL.
IF it_marc-bstrf IS INITIAL.
it_sto-orqty = lv_qty_req.
ELSE.
lv_bstmi = it_marc-bstmi.
lv_min_qty = it_marc-bstmi.
lv_bstrf = it_marc-bstrf.
lv_min_qty = it_marc-bstrf.
DO.
IF lv_qty_req <= lv_min_qty.
lv_qty_req = lv_min_qty.
it_sto-orqty = lv_qty_req.
EXIT.
ELSE.
lv_min_qty = lv_min_qty + lv_bstmi.
lv_min_qty = lv_min_qty + lv_bstrf.
ENDIF.
ENDDO.
ENDIF.
APPEND it_sto.
CLEAR it_sto.
ENDIF.
ENDLOOP.
SORT it_sto BY werks matnr.
ENDFORM. " determine_mat_qty_required
*& Form print_details
text
--> p1 text
<-- p2 text
FORM print_details .
LOOP AT it_sto.
WRITE:/ it_sto-werks UNDER text-h01,
it_sto-matnr UNDER text-h02,
it_sto-orqty UNDER text-h03,
it_sto-eisbe UNDER text-h04,
it_sto-bstmi UNDER text-h05,
it_sto-bstrf UNDER text-h05,
it_sto-labst UNDER text-h06,
it_sto-pendi UNDER text-h07.
ENDLOOP.
ENDFORM. " print_details
*& Form print_header
text
--> p1 text
<-- p2 text
FORM print_header .
WRITE: AT 001 text-h01,
015 text-h02,
030 text-h03,
050 text-h04,
070 text-h05,
090 text-h06,
110 text-h07.
030 text-h03 RIGHT-JUSTIFIED,
050 text-h04 RIGHT-JUSTIFIED,
070 text-h05 RIGHT-JUSTIFIED,
090 text-h06 RIGHT-JUSTIFIED,
110 text-h07 RIGHT-JUSTIFIED.
NEW-LINE.
ENDFORM. " print_header
*& Form create_po
text
--> p1 text
<-- p2 text
FORM create_po .
*-Document date with flag
ws_poheader-doc_date = sy-datum.
ws_poheaderx-doc_date = ws_flg.
*-Document type with flag
ws_poheader-doc_type = 'Z3'(c01).
ws_poheaderx-doc_type = ws_flg.
*-Purchasing group with Flag
ws_poheader-pur_group = '005'. " hardcoded
ws_poheaderx-pur_group = ws_flg.
*-Purchasing Organization with flag
ws_poheader-purch_org = '2000'.
ws_poheaderx-purch_org = ws_flg.
*-Supply plant with flag
ws_poheader-suppl_plnt = '2000'.
ws_poheaderx-suppl_plnt = ws_flg.
*-Company Code with flag
ws_poheader-comp_code = '2000'.
ws_poheaderx-comp_code = ws_flg.
LOOP AT it_sto.
AT NEW werks.
CLEAR tbl_poitem.
CLEAR tbl_poitemx.
CLEAR tbl_return.
CLEAR tbl_posched.
CLEAR tbl_poschedx.
REFRESH tbl_poitem.
REFRESH tbl_poitemx.
REFRESH tbl_return.
REFRESH tbl_posched.
REFRESH tbl_poschedx.
CLEAR ws_posnr.
ENDAT.
ws_posnr = ws_posnr + 10.
Item Data
tbl_poitem-po_item = ws_posnr.
tbl_poitem-material = it_sto-matnr.
tbl_poitem-item_cat = 'U'(c02).
tbl_poitem-plant = it_sto-werks.
tbl_poitem-quantity = it_sto-orqty.
APPEND tbl_poitem.
CLEAR tbl_poitem.
Item X Data
tbl_poitemx-po_item = ws_posnr.
tbl_poitemx-po_itemx = ws_flg.
tbl_poitemx-material = ws_flg.
tbl_poitemx-plant = ws_flg.
tbl_poitemx-item_cat = ws_flg.
tbl_poitemx-quantity = ws_flg.
APPEND tbl_poitemx.
CLEAR tbl_poitemx.
Schedule Data
tbl_posched-po_item = ws_posnr.
tbl_posched-sched_line = '0001'.
tbl_posched-delivery_date = sy-datum.
tbl_posched-quantity = it_sto-orqty.
APPEND tbl_posched.
CLEAR tbl_posched.
Schedule Data X
tbl_poschedx-po_item = ws_posnr.
tbl_poschedx-po_itemx = ws_flg.
tbl_poschedx-sched_line = '0001'.
tbl_poschedx-sched_linex = ws_flg.
tbl_poschedx-delivery_date = ws_flg.
tbl_poschedx-quantity = ws_flg.
APPEND tbl_poschedx.
CLEAR tbl_poschedx.
AT END OF werks.
Create the PO
CALL FUNCTION 'BAPI_PO_CREATE1'
EXPORTING
poheader = ws_poheader
poheaderx = ws_poheaderx
IMPORTING
exppurchaseorder = ws_purchaseorder
TABLES
return = tbl_return
poitem = tbl_poitem
poitemx = tbl_poitemx
poschedule = tbl_posched
poschedulex = tbl_poschedx.
LOOP AT tbl_return WHERE type EQ 'E' OR type EQ 'A'.
EXIT.
ENDLOOP.
If Loop is false - then no error occurred
IF sy-subrc NE 0.
No Errors - Commit
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDIF.
SKIP.
LOOP AT tbl_return.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
IF tbl_return-type = 'E' OR tbl_return-type = 'A'.
FORMAT COLOR COL_NEGATIVE INTENSIFIED OFF.
ELSEIF tbl_return-type = 'W'.
FORMAT COLOR COL_TOTAL INTENSIFIED OFF.
ELSE.
FORMAT COLOR COL_POSITIVE ON.
ENDIF.
WRITE:/3 tbl_return-type,12 tbl_return-id,20(85)
tbl_return-message,
86(10) tbl_return-field,95(20) tbl_return-system.
FORMAT COLOR OFF.
ENDLOOP.
ENDAT.
ENDLOOP.
ENDFORM. " create_poHi,
first you can store these 2 dates into some internal table sat it_sobid and it_ObjectID.Now
sort it_sobid ascending.
loop at it_ObjectID.
Read date from it_sobid binary search index sy-index.
it_ObjectID-date = it_sobid-date.
flag = 'y'.
endloop.
you can write some logic like this. Its just a rough idea you can modify according to ur need.
Regards,
Ravi -
Need urgent help for solving issue with my audio output.
It seems that all of sudden my integrated speakers started to make buzzing sound for a minute of a sec. and the sound comes randomly only during playback. Same thing also happens even on headphone. So any suggestions? Why it is happening??
Hi
Try to update the driver from hp.com website for Audio & Bios.
Last step is to run a recovery on the unit before this please back up your data as it will be lost.
If still does not work speaker on the unit has gone bad needs to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the speaker replaced.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath -
Need urgent help for (Message file sp1 lang .msb not found)
sir
c:\oracle9i this is my database folder name
c:\oraform this is my form folder name
which one my oracle_home name
sir i test this command
c:\ set ORACLE_HOME=c:\ORACLE9I
c:\ set ORACLE_SID=AAMIR
c:\ sqlplus / as sysdba
AND RUN SQL PLUS THEN SYSTEM GIVE ME THIS ERROR
incorrect environment variable plus_dflt program execution error
please give me idea how i run my system
thankDuplicate post:
''Urgent'' incorrect environment variable plus_dflt program execution erro -
Need urgent help in listing out checklist from DBA prespective for BI Implementation Project
Hello Guys,
We are in Designing phase Data Modeling of PDW/APS Implementation Project.
I need urgent help in making a checklist from a DBA perspective.
Like what are things ill be needing at a time of implementation/Deployment.
Your expert comments and help will be highly appreciated.
Thank you,
Anish.S
AsandeenYou can get good summary of checklist from this article about
DBA checklist for data warehousing.
Which highlights on below pointers:
New system or old. (I.e. Up-gradation vs starting from scratch)
Complexity of SQL Server architecture
SQL Server storage
Determining SQL Server processing power
SQL Server installation consideration
SQL Server configuration parameter
SQL Server security
SQL Server Database property
SQL Server jobs and automation
Protecting SQL Server data
SQL Server health monitoring and check ups
SQL Server ownership and control
based on my real time experience, I will suggest you to keep an eye on
Load performance (It will be useful when your database(Warehouse) will have huge amount of data)
System availability (Check for Windows update and up time configuration)
Deployment methodology should be planned in advance. Development of packages and respective objects should be done systematically.
Source control mechanism
Disk space and memory usage
You might or might not have full rights on production environment, so be prepared to analyze production environment via Select statements [I guess you got my point]
Proper implementation of Landing , Staging and Mart tables.
Column size (this can drastically decrease your database size)
Usage of indexes (Index are good, but at what cost?)
I hope this will assist you in building your check list. -
Need help for user exit mereq001
Hi,
I need help for user exit mereq001. I think I messed up with include table CI_EBANDB and CI_EBANMEM. And When I tried to check the syntax . It gives me error like : <b>Class IF_PURCHASE_REQUISITION. Inconsistency in the dictionary for the structure mereq_item_s_cust_data.</b> Anyone had experience for this exit? I just need to extract costcenter information of the each item from the requisition and block the requisiton if the costcenter are differents from each other before the requisition is saved. Any one has idea about it?
Thanks.biao,
Have you checked this struture consistency from SE11. Also check the activation log.
If there are any errors and you are not able to rectify the same use RSDDCHECK program, give your table name and run the report.
This will list down the error structures releated this table and also prompts for you to activate it.
Regds
Manohar -
What does a new non-DE user need? | Help for a Wiki page
Hey Archers,
I'm using Arch with the Compiz Standalone Window Manager and I need some help for a project.
It turns out (who knew) that computers need a lot more to run smoothly than just a desktop and applications. You need network managers, gtk themes and much much more. Now, Desktop Environments such as GNOME and KDE provide a lot of these programs built-in, good for them, but I'm looking to build my system as dependency-free as I can and the big DE's don't really provide that. Especially GNOME just ropes me in whenever I want to use the tiniest piece of it (darn you gnome-keyring).
So I come to you fora, with a quest for information. I want to compile an overview of essential and useful applications with minimal dependencies that allow a CompizIndy user to build his system freely. And if I get enough information, I want to turn it into its own page for the Wiki so it becomes easier to get started with a birds-eye view of what you need to flesh out your system (not exclusively for CompizIndy btw). So please help me!
What applications/daemons/tools should a new system install? I'm not asking which ones are the best or worst or your favorites, just which kinds do you need --that aren't covered in the install guide--?
For example it's advisable to get:
Panel/dock
desktop manager
network manager
compositing manager
a tool for managing removable devices (ntfs-3g etc)
a packer/unpacker
a screensaver
power management
alt-F2 runcommand
custom keybindings
a user switch/logout manager
a volume manager
etc.
So what do you recommend? What do you need to get up and going?
Hoping to hear from you guys and girls,
Matthias
PS: if I'm doubling up on anything, please let me know and save me effort and embarassment ^_^
Last edited by Matsjo (2011-01-28 20:37:26)There are many threads on this, although individual ones asking for "the best app to do XXX". You could try searching those. Also Search for the LnF Awards threads. you might find a few ideas there. We also have wiki pages for light-weight applications which might be useful
Panel/dock none
desktop manager none
network manager netcfg
compositing manager none or xcompmgr (for basic compositing)
a tool for managing removable devices (ntfs-3g etc) udiskie or udev rules or devmon
a packer/unpacker coreutils eg - tar, bzip etc with an alias called "ex" in .aliases
a screensaver none
power management ???
alt-F2 runcommand gmrun
custom keybindings xbindkeys
a user switch/logout manager none
a volume manager see udiskie....
BTW, if this is for you, then simply install Arch and use a non DE based WM --- eventually you will figure out what you are missing -
Dear All,
I need to use bulk user creation through API. Please advice which API i use to resolve this issue.
Thanks
RehanI need to use bulk user creation through API. Please advice which API i use to resolve this issue.FND_USER_PKG.CREATEUSER
FND_USER_PKG
https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_USER_PKG&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
PACKAGE: APPS.FND_USER_PKG
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=FND_USER_PKG&c_owner=APPS&c_type=PACKAGE
Thanks,
Hussein -
Need urgent help! - I accidentally sync my friend's iphone account to my company's iphone. I could not switch back to my own icloud account because of the icloud password i enter was incorrect. My friend does not use this icloud account since age only remember 1 password which i already try but iphone shown that " incorrect password" I checked on icloud ID and try to log in but it shown as " You Apple ID was disable for security reason. To enable your account must reset password" but so bad again, the email address that he used to create icloud ID also lock for security reason. May Apple Supporter please help reset it ASAP? I can verify that I am the iphone's owner, as it belong to company's phone.
Have your company IT department get proof that the company was the
original purchaser of the iPhone and visit a physical Apple store with
proof of original purchase, proof that person is company representative,
and the iPhone - Apple may be able to help. If no physical Apple store,
contact Apple - you will still need the same items of proof. -
BW error. Need urgent Help( I will give out full points).
We have BW version 3.1 and content 3.3.
We are doing loads to ODS and getting oracle partition error. It gives Oracle partition error ORA-14400. inserted partition key doesn't map to any parititon.
The exception must either be prevented, caught within the procedure
"INSERT_ODS"
(FORM)", or declared in the procedure's RAISING clause.
o prevent the exception, note the following:
atabase error text........: "ORA-14400: inserted partition key does not map to
any partition"
nternal call code.........: "[RSQL/INSR//BIC/B0000401000 ]"
lease check the entries in the system log (Transaction SM21).
ou may able to find an interim solution to the problem
n the SAP note system. If you have access to the note system yourself,
se the following search criteria:
The termination occurred in the ABAP program "GP3WRFMGVS1D8IW16LLGSL4QQKH " in
"INSERT_ODS".
he main program was "SAPMSSY1 ".
he termination occurred in line 41 of the source code of the (Include)
program "GP3WRFMGVS1D8IW16LLGSL4QQKH "
f the source code of program "GP3WRFMGVS1D8IW16LLGSL4QQKH " (when calling the
editor 410).
rocessing was terminated because the exception "CX_SY_OPEN_SQL_DB" occurred in
the
rocedure "INSERT_ODS" "(FORM)" but was not handled locally, not declared in
the
AISING clause of the procedure.
he procedure is in the program "GP3WRFMGVS1D8IW16LLGSL4QQKH ". Its source code
starts in line 21
f the (Include) program "GP3WRFMGVS1D8IW16LLGSL4QQKH ".
Please help me guys. I will award points for good answers.Dear Sir,
Now I have got the problem like yours (load to ODS and ORACLE partition error ORA-14400 with INSERT_ODS). Tell me, please - did you solve this problem?
Can you recommend me something? What did you do with partitions?
Help me, please - I need urgent help too.
GLEB ([email protected])
P.S. Sorry for my English, I havent got any language practice for a long time. -
No active writeable datasource found for user creation, check your Persiste
HI SAP Guru's
Suddenly when I am login in Portal with J2EE_ADMIN or any user , I am getting error
You are not authorized to access this application; contact your system administrator
and when I am going to create user in identity management I am getting below error
Current user has user creation permissions in the UME, but cannot create users in the back-end system (data source). The original and possibly untranslated message was: "No active writeable datasource found for user creation, check your Persistence Configuration.".
I have searched all related treads in SDN but no success
Please help.
Thanks & Regards
Vinay PatelDear all,
I was searching the community because I had this same error and there was no answer of how it was fixed. So I'm sending how I fixed today in a customer environment.
1. Go to portal http://<portal>/webdynpro/dispatcher/sap.com/tcsecumewdumeadmin/UmeAdminApp
- select configuration
- folder "sap system based in abap"
- do the conection test
If the test fails, log on in client 001 and change user SAPJSF:
- assign role SAP_BC_JSF_COMMUNICATION (only this one) and one profile that has permission to RFC logon
- you can change the password too
STOP/START ABAP+JAVA
Go again to the portal above and test connection again. The tests should now be OK.
2. Go to portal http://<portal>/irj
- Log on with administrator user
Now you should be able to create an user.
Maybe you are looking for
-
Adobe Reader 10.1.7 crashing with memory access violation
After upgrading to 10.1.7 on some Windows Server 2003 SP2 (32-bit) terminal servers, we get Adobe Reader X unable to open any PDF. It launches for a brief second and then closes, apparently with exit code -1073741819 which I was able to get from runn
-
hi all can u give me table name and link between sales billing documents and transporter name. thanks in advance.
-
Asx displays plain text not mms stream
I have used the Mac's Web Sharing Apache server to make a little page that you can click on and loads a asx playlist with a mms entry. This can be played with Flip4Mac on my computer locally through safari or it can be played on a PC with WMP10 or it
-
OT question re: Firmtek vs Internal
Good evening all. I have a firmtek SATA card in my DP 2.3 system and a firmtek 4 Drive SATA case running 3 500 GB and 1 150 10k drive which is running all audio files while the 3 500 is running sample libraries. Will I get better audio performance fr
-
I have been using elements 9 fine for a few months now without any concerns until today. I can load the organiser fine but when it comes to selecting edit in photoshop and the system trys to lad i get the following error - Could notmopen a scract fil