NeedHelp Is it bug at IDSM-2 with IPS-K9-7.0-2-E3.pkg??

Dear All,
i have idsm with IPS-K9-7.0-2-E3.pkg installed,
i use inline mode for this idsm, and idsm place is front on server farm
but i have some problem that one segment in my network cant access the server
but another segment can access that server,
that server is oracle database aplication (real time)
in this is happend only for that server.
when i filter the traffic with idsm, the result that transaction match with
signature number 7000, evenly that signature dont have action to deny the traffic,
the traffic still cannot bypass, then ill try to disable but nothing impact to that segment
evenly other segment can access that server normally.
anyone can explain to me why this happen??
ill try to downgrade to IPS-K9-7.0-2-E3.pkg with IME but always error..
anyone can help me please..

Hi Josh..
This is my answer
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
First off, you cannot downgrade the version without a re-image. You can only downgrade signatures. Second, you mention 7.0(2)E3 as the version you are on and the version you want to downgrade to. Can you verify what version you are running?
Im not yet downgrade to 7.0(2) because I don’t have yet permission from my bos . And now my isdm still use 7.0(2)E3
This is capture from my isdm
OTIDSM# sh ver
Application Partition:
Cisco Intrusion Prevention System, Version 7.0(2)E3
Host:
    Realm Keys          key1.0
Signature Definition:
    Signature Update    S425.0                   2009-08-17
    Virus Update        V1.4                     2007-03-02
OS Version:             2.4.30-IDS-smp-bigphys
Platform:               WS-SVC-IDSM-2
Serial Number:          SAD132802TL
Licensed, expires:      20-Oct-2010 UTC
Sensor up-time is 2 days.
Using 1415421952 out of 1983504384 bytes of available memory (71% usage)
system is using 17.4M out of 38.5M bytes of available disk space (45% usage)
application-data is using 38.6M out of 166.8M bytes of available disk space (24% usage)
boot is using 41.5M out of 68.6M bytes of available disk space (64% usage)
MainApp            B-BEAU_2009_OCT_15_08_07_7_0_1_111   (Ipsbuild)   2009-10-15T08:09:06-0500   Running
AnalysisEngine     B-BEAU_2009_OCT_15_08_07_7_0_1_111   (Ipsbuild)   2009-10-15T08:09:06-0500   Running
CollaborationApp   B-BEAU_2009_OCT_15_08_07_7_0_1_111   (Ipsbuild)   2009-10-15T08:09:06-0500   Running
CLI                B-BEAU_2009_OCT_15_08_07_7_0_1_111   (Ipsbuild)   2009-10-15T08:09:06-0500
Upgrade History:
IPS-K9-7.0-2-E3   07:43:07 UTC Thu Oct 15 2009
Maintenance Partition Version 2.1(3)
Recovery Partition Version 1.1 - 7.0(2)E3
Host Certificate Valid from: 27-Apr-2010 to 27-Apr-2012
On the traffic not passing issue, if you put the sensor in bypass does that resolve the issue. That will eliminate any signature related actions from impacting the traffic. If you are still unable to access the servers then you should look for a routing or network layer issue
What you mean about bypass? Is it to released the idsm from network? If that so, I had do that and the server can access from segment that before cant access it. I had done to check the network layer problem but everything is ok,
And I want to clarify the other segment that cant access the server only for some application (real time application) in that server but the server can ping and telnet from that segment ( I think this is to clarify the network issue problem)
If that clears things up, the next step would be to create an Event Action Override to produce alert for all signatures. Then you can review IME for any signatures firing related to these servers. Please remove the Override once you are done testing as this can have a performance impact on the sensor over time and should only be used temporarily to troubleshoot a specific issue.
Well, I will try your suggestion, But I will wait permission to execute it. I hope this is work for my idsm-2
If you are still having trouble, if may help to get some info about the config of the sensor and the switch. Specifically, how the VLAN or Interface Pairs are setup, etc.
Oke, I will…
Btw, thanks for your help boss
GBU …

Similar Messages

Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5

Is anyone else having a weird bug in MobileMe gallery with volume on iOS 5? I am having a weird problem, where if I view a video I have uploaded and change the volume, I used the on-screen slider and It changed the volume but it also popped up like I was controlling it from the side. I thought that was kind of weird. If you want to see my problem, there will be a video up on Contemputech.com within a half-hour of me writing this.
Thanks!
Nolan

Hello everyone!
I'm hoping you are no longer having problems with your iPhone visual voice mail.
I can understand how frustrating it is to not be able to access such a great feature on your iPhone.
We did determine customers not being able to access Visual Voicemail on their iPhones.
Common errors are "visual voicemail is not available" or it just keeps loading the message.
(In the meantime, you can still review voicemail messages by dialing *86)
This issue should have been resolved for everyone effective 3/2/12.
Please let me know if you are still having problems with iPhone Visual Voicemail by sending me a direct message.
Thanks for your patience with this.
Tamara H.
Follow us on Twitter @VZWSupport

[svn] 4793: Fix bug SDK-17734 Path with width and height set different than path data has incorrect bounds

Revision: 4793
Author: [email protected]
Date: 2009-02-02 11:20:06 -0800 (Mon, 02 Feb 2009)
Log Message:
Fix bug SDK-17734 Path with width and height set different than path data has incorrect bounds
Fix: When calculating the bounds position we should take into account the implicit scaling factor actualSize/naturalSize. Also did some refactoring, getting rid of the protected method calculateTopLeft.
QE Notes: None
Doc Notes: None
Bugs: SDK-17734
Reviewer: Ryan
tests: mustella gumbo/layout/GraphicElement
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17734
http://bugs.adobe.com/jira/browse/SDK-17734
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/Ellipse.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/Path.as
flex/sdk/trunk/frameworks/projects/flex4/src/mx/graphics/graphicsClasses/GraphicElement.a s

Thank you so much for replying.
Yes I have removed and reinstalled WMP.
I had good results with the PD6 application installed on the default path onto the C: drive with the one exception that if the application was launched by accident and the user data path was not available, the PD6 application would blow away my custom user path registry settings. Now that I know what they are I have made a .reg file to repair my registry to my desired user data paths.
Installing the application on the removable drive appeared to help prevent me from launching the application by accident and overwriting my registry with default user paths.
So which is the less of the two evils?
If the application directory is not available, windows media player still tries to launch the .msi for installing PD6.
If I install the application to the C: drive but the user data to the removable drive, launching the PD6 application without the user data drive will still corrupt my registry settings for a user data path.
Both these issues seem like a logical (if not easy) fix that should be done in the PD6 application and installation package. I mean really, cannot anyone tell me why windows media player is checking the PD6 application directory? Why in PD4 did we have an option control for setting the user data path from the PD4 application? Why is this option not in the PD6 application, just the installer?
I am given a choice during installation to move the user data to another non default location. Why else would this be provided if not to accommodate my kind of request to store the user data into an alternate location other than “My Document”. Certainly Palm is not trying to force the users on how to protect and store their personal data?
Post relates to: Centro (Verizon)

Bug in ResultSet#getDate() with ojdbc7-12.1.0.1

As "documented" here java - ResultSet#getDate() semantics - Stack Overflow there seems to be a bug in ResultSet#getDate() with ojdbc7-12.1.0.1.
The java.sql.Date condition
To conform with the definition of SQL DATE, the millisecond values wrapped by a java.sql.Date instance must be 'normalized' by setting the hours, minutes, seconds, and milliseconds to zero
is violated.
How can we report that to Oracle?

Hello Hwang
1/ I don't know for your first question. Have you checked all the RUEI rpm prerequisites? One should be missing probably.
2/ One solutions consists of installing and configuring Squid proxy on the RUEI server. Then you can use your own browser with ruei server as a proxy and surf. You also need to tweak RUEI to collect traffic within the right network card.
as $RUEI_USER :
execsql config_set_profile_value wg profile_wg_localhost_1 config ForceInterface add eth0
replace wg by the name of your profle (probably wg anyay) and eth0 by the proper network card (also eth0 probably).
GL & HF
JB

Bug Appeal: LV6 activeX with Excel; Error -2147319784

At Thu, 16 Nov 2000 14:55:00
"Dominic Lavoie" wrote:
<-2147319784 Old format or invalid type library.
Dominic and others
This is an old bug in LabVIEW that I have been fighting
with for several years. The problem (as I have seen it) is that
LabVIEW for some reason on some PC's suddenly becomes unable to read
from the (NT-) registry that Excel is installed as an
available ActiveX component on the machine. In my case the
Excel8.olb file.
Under earlier verion of LabVIEW no error messages
was generated, but you could see the problem when entering
the list over ActiveX classes, Type library. Suddenly the Excel
would be gone from this list, and it will not come back no matter
how you try to install, reinstall or reconfigure the Excel (or Office)
system. (And the Regsvr32 program does not handle OLB files.)
The only way I have heard to fix it, is to reformat the
harddisk and install the OS and everything fresh. But you might
see the problem coming back again.
There might be a possibility that this bug is not NI's, but one
in the OS. When I use other programs to View/Edit the registry,
these programs have no problems of detecting the Excel library.
So I believe it is a LabVIEW bug !
When working with Excel and ActiveX with this problem
meant that you had to manually browse to the OLB file each time you
would want to work with it, or you would sometimes get messed up
the wires and VI's working against the Excel library.
Now, under LabVIEW 6i, this situation creates the error message
-2147319784, and the problem suddenly seems much bigger.
I have reported this bug two month ago to NI, together with some
other people that has seen the same problem. So far NI has not
been able to locate the problem in detail or done anything with it,
as far as I have been informed.
This has been a very frustrating experience for me, because there are
many other features under 6i that I would like to use right away.
But since I am working a lot with Excel as a data format from LabVIEW,
I cannot proceed with 6i before they have broken this bug.
So now I would like the LabVIEW community to help me push NI
a little in their effort to debug this one.
All questions of course assuming that you have installed Excel
on your PC.
Could as many as possible out there check out if,
when testing the ActiveX/Excel examples;
A) under 6i; do you get the Error -2147319784 ? (YES or NO)
B) under 5.1.1 or earlier; can you run the example Write Table to XL.vi ?
(YES or NO)
C) if B=NO, can you locate the Excel library in the ActiveX class list ?
(YES or NO)
D) Where in the world are you located (country) ?
(Some has speculated that this bug might be connected to a problem
with different OS versions in different parts of the world.)
E) What version of Excel are you using ?
F) What OS are you running ?
If you can't do both A and B/C, send me the one you can.
Please report your results directly to me.
DO NOT REPLY TO THIS LIST. I will send a
summary after a couple of weeks, to let you know
the results. And also if NI seems to make any progress here.
best regards
Martin Plassen

"[email protected]" wrote in message
news:[email protected]...
> Martin, I'm not sure how to reply directly to you. (I can't find your
> email address or anything.) I may be experiencing a very similar
> problem. I am trying to generate Excel reports using LabVIEW 6.0
> under a Windows 2000 OS. Under Win95 in LabVIEW 4 I had no problem
> but I recently updated. Now I can't even open Excel using the NI
> distributed LabVIEW 6i Excel toolkits from ni.com. When I execute the
> Open Excel vi I get a Windows error message, "Labview.exe has
> generated errors and will be closed by windows. An error log is being
> created." Could this be the same problem dominic was having under WIN
> NT?
dmbillings
It seems NI has been so kind as to remove the fix on this problem
from their Knowledgebase. Well, I dug up some old e-mails on the subject,
and here's one you should look through. According to NI this problem
should have been fixed under LV 6, so I really hope this is not what you are
facing...
Martin
Good news for all of you,
we have a bug-fix that seems to do the trick.
Here's the recipe , with my words:
Do You have the bug ?
You can confirm that the bug is there, by opening a new file in LabVIEW,
in the diagram, insert an Automation Open.VI, right-click on it,
Select ActiveX class, Browse, and check the Type Library list.
You should not see the Microsoft Excel5 and 8 library in the list,
if the bug is there.
As I have suspected for a long time, the whole bug was related to
how LabVIEW read the registry at startup to locate all ActiveX
components on the machine.
Here's the fix to try out;
1. Open the RegEdit program
2. Under HKEY_CLASSES_ROOT locate the TypeLib
3. Locate the Excel-key
On my machine this is {00020813-0000-0000-C000-000000000046}
(You will find it on top part, I think, not necessary to browse long
down.)
4. There are two base keys there, named "1.0" and "1.2".
Under the "1.0"-key, right-click and create new key, name it "0"
(zero).
5. Under the new "0"-key, create a new key kalled "win32".
6. Under the "1.0"-"9"-"win32" key you will find the link to the
Excel5-library on the machine, copy this link into the key you created
under pt 5.)
On my machine this is "C:\Program Files\Microsoft
Office\Office\XL5EN32.OLB".
That's all. Exit RegEdit.
Afterwards, check again that the Microsoft Excel5 and 8 libraries
is on the LabVIEW list mentioned above. After restarting LabVIEW of
course. It is not necessary to restart the PC.
Attached you wil find two gifs showing how this should look
in RegEdit before and after the described operation.
Good luck
PS: hacking around is the registry are do be done with
caution. The wrong actions here could have large consequences.
The two attached pictures should help you out,
but if you feel uncomfortable by working with the registry,
try to hook on to some hacker around that has been there before.
As I understand it, this is the reason that NI asked me also not to
give this info directly to the List-server. So please don't do it
you either. I plan to put the word out about the fix, not with these
details, but with a reference to the NI Knowledgebase that soon will
have this info.
You are welcome to send me a conformation that you see the
fix is working, or worst case, not.
Martin

[svn:fx-trunk] 6993: * Fixed a duplicate Bindable metadata bug that showed up with

Revision: 6993
Author:   [email protected]
Date:     2009-05-16 23:57:42 -0700 (Sat, 16 May 2009)
Log Message:
Fixed a duplicate Bindable metadata bug that showed up with
describeType().
tests Passed: checkintests
Needs QA: YES, just confirm the bug fix, please.
Needs DOC: NO
Bug fixes: SDK-21133
API Change: NO
Reviewer: Pete F.
Code-level description of changes:
BindableSecondPassEvaluator.java
    Modified moveMetaDataToNewDefinition() to no longer insert the new
    Bindable metadata into the definition's statement list, because
    prepMetaDataNode() already handles this.
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-21133
Modified Paths:
    flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/binding/BindableSecondPassEva luator.java

I just noticed that for some reason the project is using an old path to my SVN repository. I recreated it and reimported the project but for some reason Xcode didn't realize that. I'm betting there's some little file somewhere that's causing my problem.

Diverting traffic to IDSM for inline IPS mode

I have a catalyst 6500 swtich containing FWSM and IDSM-2 module. Vlan 1000 is the outside interface for the fwsm to which all bussiness servers are mapped (vlan 900, inside interface of fwsm).
I want to inline IPS all the traffic going to these bussiness servers.
I have no issue with IPS configuration.
Could you please guide me with a configuration for 6500 switch for diverting this traffic.
I can provide 6500 configs if required.
An example would be appreciated.

I'm not sure if this is relevant to your situation, but here is how I have a gateway 6K switch set up with an external 4255 IPS device. You should be able to substitute the IDMS2 though.
Internet -> port 1/2 Vlan 5 -> port 3/1 Vlan 5 -> 4255 vlan pair to -> port 3/2 Vlan 2 -> MSFC Route Module -> rest of vlans internal...
What I am doing in bringing my uplink in on a physical port that is in Vlan 5. I put one side of my IPS sensor into Vlan 5. These two ports are the only ports in Vlan 5. The IPS sensor port is vlan paired through the sensor to a port in Vlan 2. From this point, my MSFC route module has virtual interfaces for Vlan 2 and all of the rest of my internal Vlans. There is no route entry for Vlan 5, it is a pure switching vlan.
What I like about this setup is that the IPS is transparent. If I have a problem with my IPS device or if I am doing an image upgrade, I can move the vlan for port 1/2 into Vlan 2 and logically bypass the IPS device...taking it out of inline without having to change anything else in the switch config and only having to wait for the spanning tree to converge.
For the IDSM2, since the ports are trunk ports, you'd want to set the native vlan to the target vlan of each port and set the allowed vlans to just the target vlan of each port (ports 7 & 8).
Hope this is useful,
Scott

How do I use Cisco MARS to monitor two ASA (active/stby) with IPS modules?

Hi
The two ASA with IPS modules are in active/standby mode. When I try to add both the two IP (active/standby) into the MARS, the MARS will complain duplicated hostnames.
How to setup MARS to monitor ASA with IPS with active standby topology?
Thanks!

Hi,
The fundamental problem with this scenario is that you have non-failover capable modules in a failover chassis - think of the ASA failover pair as one device and the IPS modules as two completely separate devices.
Then, as already mentioned, add only the primary ASA. (The secondary will never be passing traffic in standby mode so it's not actually needed in MARS) Then, with the first IPS module you can add it as a module of the ASA or as a standalone device (MARS doesn't care). With the second IPS module the only option is to add it as a separate device anyway.
In a failover scenario the ASA's swap IP's but the IPS's don't so whereas you'll only ever get messages from the active ASA you'll get messages from both IPS IP's depending on which one happens to be in the active ASA at the time.
Don't forget that you have to manually replicate all IPS configuration every time you make a change.
HTH
Andrew.

Looking for a List of GT72 with IPS screen

hi guys !
I'm looking to buy a GT72 with a 970M or 980M , but my main focus is on the screen . i really want a IPS screen with my GT 72 , and i know that there is a few which got one.
when i look on website a lot of information are missing and i'm never sure if there is actually a IPS screen or not.
My budget is like between 1.7k€ and 1.9k€ so if someone could make a list of GT72 with IPS screen in this price average it would be nice
sorry for my bad english
thanks

Hi Ann Thanks for that. I did come across that list too. There is a wiki site started also that has bugn to show how each works too. That's what I'd love to create for the entire list with a thumbnail as a visual When I have time!
http://premierepro.wikia.com/wiki/Transitions

Configure ASA5515-X with IPS as standalone IPS.

There are instances in our organization when our customers need to have a standalone IPS device due to environment restrictions. In the past we used the 4240 sensors which are now, or soon to be, EOL. The upgrade path is the ASA 5515-X with IPS services and I have heard that the device will be able to operate as a standalone IPS device.
Does anyone know if this is indeed possible or does anyone have experience configuring the device this way? It'd definitely be cheaper than going with the 4300 devices so I'd be interested in feedback on this.

We've done this with ASA5500 models, so it's a safe bet you could do this with the ASA5500x devices as well.
The difference between using an ASA and an appliance for an IPS sensor is there's all sorts of firewall technology that you'll need to disable (as much as possible at least, you can't turn it all off) and I believe the sensor will be blind to layer 2 attacks.
- Bob

IPS Tech Tips - Introducing NGFW with IPS

Robert Albach invites you to attend a 30-45 minute Web seminar on the Cisco new NGFW with IPS and its operations. This event requires registration.
Topic: Cisco IPS Tech Tips - Introducing NGFW with IPS
Host: Cisco Security Group
Date and Time:
Thursday, December 19, 2013 10:00 am, Central Standard Time (Chicago, GMT-06:00)
To register for the online event
1. Go to https://cisco.webex.com/ciscosales/onstage/g.php?d=207672622&t=a&EA=ralbach%40cisco.com&ET=5a30e5f0d7b86e89044459f4fac9065e&ETR=6d878102a33643d67bc6b9d3df08da27&RT=MiM3&p
2. Click "Register".
3. On the registration form, enter your information and then click "Submit".
Once the host approves your registration, you will receive a confirmation email message with instructions on how to join the event.

The recordings and the presentation slides are placed here on the Cisco Support Community. I think if you roll the threads back some you will see the prior month's Tech Tips (then called Tech Talks) posted.
This one will be posted a few days after the event.
-Robert

BUG: File History fails with no warning- Event ID 201

I apologize for the long post but I want to summarize everything I've learned about this so far, as it looks like a critical bug.
I am unable to get File History to backup my files with Windows 8.1. I set up a 1 TB USB HDD as the target drive and it seemed to run for a minute or two, and then quit completely without any warning. It created two empty folders on the target
HDD, but no data was backed up. I then clicked "Run Now" to try and get it going again, but nothing happened.
Under "Advanced Settings" I opened the event log, and saw an Event ID 201 was created each time File History attempted to run: "Unable to scan user libraries for changes and perform backup of modified files for configuration C:\Users\MyUserName\AppData\Local\Microsoft\Windows\FileHistory\Configuration\Config".
I've pasted the entire error below. The "Event Log Online Help" link opens to "Page not Found" on TechNet.
A Google search revealed other users are experiencing this problem, too (links below). Some people have been able to solve it by excluding libraries and/or moving all of their data out of the libraries then replacing it one folder at time, running
FH, and repeating until they find the "offending" file by error 201 occurring.
There are reports of similar problems with Event IDs 202, 203 and 204. A similar, but separate error is "Unusual condition was encountered during scanning user libraries for changes and performing backup of modified files for configuration C:\Users\MyUserName\AppData\Local\Microsoft\Windows\FileHistory\Configuration\Config".
Based on others' posts, the problem appears to be a bug in how FH handles files/folder names that are similar,
contain unusual (but legal) characters, and shortcuts ("reparse error").   The second bug is, regardless of which Event ID, that
FH does not alert the user when it fails, so you have no idea your files are not being backed up. Even if you are able to eliminate the problem once, there is no guarantee that it won't happen again. Once error 201 occurs, File
History is dead in the water and unfortunately since Windows 7 File Backup was removed, there is no alternative data backup method available.
If anyone has an idea of how to solve or work around this problem (i.e. under exactly what filename conditions FH fails), please post. I have Windows 8.1 installed on drive C, Windows 7 on drive D, and a data partition E onto which I moved all my Libraries.
The Win 7 and 8.1 libraries are in separate folders and not linked in any way, so 8.1 is not trying to back up 7's data. However, the partition arrangement does not appear relevant.
Thanks!
Related links:
http://answers.microsoft.com/en-us/windows/forum/windows_8-files/filehistory-unable-to-scan-user-libraries-for/b43183bc-eeaa-4d1a-bda4-0ab9dcf061be
http://social.technet.microsoft.com/Forums/windows/en-US/ccd27fbc-2d95-4ab7-bdd1-2c0c6a43bd2f/file-history
My Event Log:
Log Name:      Microsoft-Windows-FileHistory-Engine/BackupLog
Source:        Microsoft-Windows-FileHistory-Core
Date:          4/3/2014 11:01:19 PM
Event ID:      201
Task Category: None
Level:         Error
Keywords:
User:          SYSTEM
Computer:      ThinkPad-Edge
Description:
Unable to scan user libraries for changes and perform backup of modified files for configuration C:\Users\inert_000\AppData\Local\Microsoft\Windows\FileHistory\Configuration\Config
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-FileHistory-Core" Guid="{B447B4DB-7780-11E0-ADA3-18A90531A85A}" />
    <EventID>201</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x1000000000000000</Keywords>
    <TimeCreated SystemTime="2014-04-03T14:01:19.267846200Z" />
    <EventRecordID>12</EventRecordID>
    <Correlation ActivityID="{388E273A-4F3D-0001-022B-8E383D4FCF01}" />
    <Execution ProcessID="556" ThreadID="5128" />
    <Channel>Microsoft-Windows-FileHistory-Engine/BackupLog</Channel>
    <Computer>ThinkPad-Edge</Computer>
    <Security UserID="S-1-5-18" />
</System>
<EventData>
    <Data Name="Hr">2147747327</Data>
    <Data Name="ConfigFilePath">C:\Users\inert_000\AppData\Local\Microsoft\Windows\FileHistory\Configuration\Config</Data>
</EventData>
</Event>

Hi, thanx for the post. It helped me to fix my Problem with file history.
In my case it was the spelling of some files. I'm German and we have some Special chars like ä,ö,ü and ß.
The "Problem" is that You can spell These also in a different way for example "ä" is same like "ae" and "ß" is same like "ss" .
If I Name one file like "groß.txt" and the other one "gross.txt" file history won't work! I don't know why, probably MS conversts the Name in the background or whatever - but this really
sucks!
Even more that You don't get informed! Only when checking the eventlog - and not even in the "normal" eventlog - You have to go to "Microsoft-Windows-FileHistory-Engine/BackupLog" - well, how often does one look up this??
I think file history is quite useless in this state as it does not inform the user about Problems with the backup. And I really don't want to get "informed" when I Need to restore some files...
Cheers
To life is christ, to die is gain...

A lot of CS4 bugs I need help with....

The list of bugs I am about to post that are ongoing issues with my CS4... I have tried searching for solutions but to no avail...
Corrupt frames Sometimes for no reason, a frame in the timeline will corrupt. everytime you 'scrub' or try to edit a certain frame it crashes. even if you restart flash, open the fle again, without fail that frame will cause it to crash. meaning you
have to back step and get rid of the offending frame. and start again. I knows so many people that ths has happened to. resulting n drasticlly closely missing deadlines.
Ghost frames: It will, for me, CONSTANTLY leave ghost frames. a solid 'onion' frame as if you have accidentally copied and pasted a previous frame
over the top, there is no way of getting rid of it unless you leave the symbol and re-renter, but it will shortly return.it's a solid image that doesnt move, you just can't see what you're doing.
The onion skin often refuses to work also. - I worked out for myself this was a problem with other layers being locked below it. which is ridiculous. I can work around this but it still shouldn't happen.
Deleting fills: When I move shapes with more than one fill, it will often delete a fill, or fill some in a different colour. If I am drawing with the brush tool it sometimes will delete other sections I have drawn with the same tool.
Not to mention the thousands of times it will crash unexpectedly. and I mean this happens a LOT.
These all happen with no correlation to previous things I have done.
I'm a professional animator and I'm sure everyone has heard this all the time but I think it's very important. I rely on Flash as my main piece of software. As a freelancer affording software (as everyone knows) is VERY difficult so when you shell out the thousands, you expect to be given
good quality software that you can rely on. I can't afford an upgrade right now. and certainly don't want to upgrade purely because Adobe has decided to issue a faulty product.
I am close to missing deadlines because of the bugs. I have downloaded EVERY update hoping they will fix this stuff but it doesn't. CS3 was mainly fine, why is this so bad? I really think they should offer a free upgrade to CS5 for people with CS4 issues. I am reduced to tears with stress when working on projects that are corrupting and crashing for no apparent reason. If you bought any other peice of equipment that was faulty you wouldn't be expected to pay for one that works.
Anyone know of any answers to any of the above bugs? MAINLY avoiding the corrupt frame problem?

iWork is probably not the best way to keep track of photos if you want to have clickable thumbnails and links to full size images. I say that only because I once had such an idea and after playing with it for some time I reverted to using the tools in iPhoto; Events, People, Keywords, etc.
As an adjunct to iPhoto or Aperture to reference events and photos it might be useful to keep track of photo shoot sessions in Numbers. What types of information are you seeking to track?
Jerry

IPod bug on iPhone 4 with iOS 4.2.1

This has happened a few times with different albums/tracks:
I'll play an album and realize that a track has skipped and/or a track starts playing a few seconds into the track. Hitting "back" doesn't fix the problem; the track just starts playing at the wrong spot again no matter what I do. Basically the "start" position for certain songs gets set to the very end of the track (resulting in the track immediately ending and moving on to the next track) or the start position gets set to a few seconds into the track. Only an iPhone reboot fixes this. I can't figure out any reason why certain tracks are affected. There is nothing wrong with the tracks. They are fine on the computer and fine after an iPhone reboot.
Anyone else having this problem? I'm close to doing a restore of my phone because of wifi and AirPlay related issues. This problem just pushes me closer.
Erik

I'm having the same exact problem with my iPod Touch with iOS 4.2.1.
Also the album art doesn't always show on the lock screen and the videos and songs sometime start from the position I left them to, even if I listened to something else after.
Apple better release their 4.2.2 or 4.3 soon and correct these bugs because 4.1 was just fine for me.

Possible bug in Photoshop CS6 with app.activeDocument.path.

JavaScript running in Photoshop CS6 under OS X 10.7.5 returns the wrong result for app.activeDocument.path when the file is located on the boot drive. The result is undefined and an error message incorrectly states that the document has not been saved yet. If the file is located on a remote volume, the correct path is returned.
To reproduce this problem, create a new file in Photoshop CS6 on a Mac. Save the file to the desktop. With the file still open, run the following script in ExtendScript Toolkit.
// start script
var thePath = app.activeDocument.path;
alert(thePath);
// end script
Running the same script with a file located on a server volume open in Photoshop correctly returns "/path/to/file.psd" instead of undefined and no error occurs.
This appears to be a bug in Photoshop CS6's JavaScript implementation. This problem did not exist in Photoshop CS3.
A similar issue prevents Photoshop CS6 from saving files to the boot drive using activeDocument.saveAs.
Has anyone else experienced this problem? If so, have you discovered an alternate method to determine the file path or save a file on the boot drive?

Don't know if this will help much but at least you can use it to check a document's filepath without throwing an error. And maybe tell if the problem is with the Photoshop DOM.
function hasFilePath(){// returns true/false
    var ref = new ActionReference();
    ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
    return executeActionGet(ref).hasKey(stringIDToTypeID('fileReference'));
function getFilePath(){// returns path as a string if exists, undefined if not
    var ref = new ActionReference();
    ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
    var desc = executeActionGet(ref);
    if(desc.hasKey(stringIDToTypeID('fileReference'))) return decodeURI(desc.getPath(stringIDToTypeID('fileReference')));

NeedHelp Is it bug at IDSM-2 with IPS-K9-7.0-2-E3.pkg??

Similar Messages

Maybe you are looking for