Needing AdjTrans field in OJDT to get ticked when doing a JE import via DTW

Hi
I am importing Journal Entries and am needing to have the Field AdjTrans = Adj Trans (Period 13) ticked, when going through the DIAPI Reference help this field is not listed as well as not being listed in the DTW Template, I have added this to the DTW Template gone to my mapping under "Map Rule" tab, the Source Fields have my AdjTrans because of the DTW Template but can't map it on Target Fields(B1).
This field exists when looking in MSSQL (OJDT,AdjTrans)
Is it possible for me to do an import to tick this field or is it going to have to be done manually?
Regards
Kurt Walters
Edited by: Kurt Walters on Feb 4, 2010 12:21 PM

Hi Kurt Walters,
DTW is based on DI. Only the fields exposed to DI will be available. If you could not find the field, you will have no option to DTW it.
Thanks,
Gordon

Similar Messages

Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram, Lately Photoshop CC 2014 in my PC gets blocked when doing

Últimamente Photoshop CC 2014 se detiene fusionando las capas al hacer panoramas. Primero edito mis fotos Raw en Lightroom luego las paso a Photoshop para hacer panoramas. Photoshop las abre y fusionando las capas se detiene.
Según el administrador de tareas cuando se bloquea tiene ocupado el 81 % de memoria 25% de CPU y 1% del disco.
Mi PC tiene Windows 8.1 de 64 bits y tiene 8 Gb de ram
Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram

Últimamente Photoshop CC 2014 se detiene fusionando las capas al hacer panoramas. Primero edito mis fotos Raw en Lightroom luego las paso a Photoshop para hacer panoramas. Photoshop las abre y fusionando las capas se detiene.
Según el administrador de tareas cuando se bloquea tiene ocupado el 81 % de memoria 25% de CPU y 1% del disco.
Mi PC tiene Windows 8.1 de 64 bits y tiene 8 Gb de ram
Lately Photoshop CC 2014 in my PC gets blocked when doing panoramas. First I edit my raw photos in Lightroom, then export to Photoshop for making panoramas. My Pc runs Windows 8.1 64 bits 8Gb Ram

After downloading the IOS5 my phone gets stuck when doing the back up. What should I do?, After downloading the IOS5 my phone gets stuck when doing the back up. What should I do?

My iphone gets stuck when doing the back up of the IOS 5. What should I do? Any ideas?

I'm having the same issue on the 3Gs. I get a message "an error occurred while backing up this phone (-43)." It tells me if I continue the contents of the phone while be deleted. Is it safe to continue and restore from my current backup? I can do a manual backup without any issues.

Getting error when I try to import images into my application

I get this error when I try to import an Image file exported from my application on another PC, everythign else has moved over fine except the images:
ORA-20001: GET_BLOCK Error. ORA-20001: Execution of the statement was unsuccessful. ORA-01003: no statement parsed <pre>begin wwv_flow.g_import_in_progress := true; end; </pre>
Error installing image.
Return to application.
Please help.
user5607453
Edited by: user5607453 on Jun 23, 2009 12:50 PM

I tried to use an external hard drive from my windows computer that was formatted in NTFS Windows format. Mac Pro sees that hard drive as "read only". Itunes works on existing media on the hard drive to play music or movies, but when you try to purchase from itunes store and download you get the above message. You need to move your library to a library that is formatted in exFAT format (which can be used both by "windows" and mac computers.

Getting error when running PRC: Transaction Import

Hi Folks
Am getting an error when running PRC: Transaction Import to transfer time entries from OTL to Projects.
Has anybody encountered this before?
"MSG-20002: ORA-20002: pre_import:ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "APPS.PA_TRX_IMPORT", line 7549"
If yes, please let me know the resolution.
Kind Regards
Srini.

Pl see if MOS Doc 117395.1 (Transaction Import Interface Troubleshooting Guide) can help
HTH
Srini

I keep getting errors when iTunes uploads newly-imported music to iCloud through iTunes Match. Is there something that needs to be corrected when importing my music?

Here is the what the message window says when I click on the iCloud symbol with an exclamation point:
"This item was not added to iCloud because an error occurred."
It happens erratically. I thought it was my computer at home (a PC), so I tried importing the music on my work computer (an iMac).
It happens on both, and the same songs. Sometimes it's up to half of the songs on a CD.
I can't figure out why it's doing this.

Sounds like your library database may be being corrupted. With iTunes 11 an "empty" library will show the previous purchases of the account that is currently signed in. To prevent this go to iTunes Preferences > Store and untick Show iTunes in the Cloud purchases. Have you actually checked the hard drive to see if the media is still present? Chances are you need to restore an older library file in the way set out below...
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
The images are from Windows XP, but the principle is the same. Depending on the age of you library the library file may not include the .itl extension.
tt2

Need help: Distribution demand is not getting created when Iu2019m using Purch

Friends,
When Iu2019m running the heurisitic plan distribution demand is not getting created. Iu2019m working on SCM 5.1
I have a transportation lane which are automatically created using the Purchase inforecords. Iu2019m not
facing any issues tranfering this purchase info records (PIR). Iu2019m able to see this as transportation lanes
in APO. When I run the heuristic plan run purchase requsition are getting created but distribution
demand is not getting created. I have tested the same scenario by manually creating transportation
lanes. The manually created transportation lanes are generating distribution demand but purchase info
record transportaton lanes are not generating the distribution demand. What may the cause? I would really appreciate for
your input in advance.
Regards
KRN

Friend,
I have maintained the means of transport to the tranportation lane
Regards
KRN

Data getting deleted when doing the validation

Hi all,
I have a web dynpro application to park an accounting document and I want the following functionality to it.
When a user enters fund starting with 'P' then the cost center field should be greyed out and if WBS element field is not entered then I should see the error on the screen that it's a mandatory field.. For this I have written the following code:
LOOP AT lt_el_tbseg INTO lo_el_tbseg.
    lo_el_tbseg->get_static_attributes(
                           IMPORTING static_attributes = lv_bseg ).
    CLEAR lv_bseg-lifnr.
    CHECK NOT lv_bseg IS INITIAL.
    TRANSLATE lv_bseg-geber TO UPPER CASE.
    IF lv_bseg-geber(1) = 'P'
                       *       navigate from <CONTEXT> to <EDIT_PROPERTY> via lead selection
      lo_nd_edit_property = wd_context->path_get_node( path = `Z_POSTING.CHANGING.T_BSEG.EDIT_PROPERTY` ).
*       get element via lead selection
      lo_el_edit_property = lo_nd_edit_property->get_element( ).
      lo_el_edit_property->set_attribute(
        name = `EDIT_WBS`
        value = 'ABAP_TRUE' ).
      DATA lv_projk TYPE wd_this->element_t_bseg-projk.
      IF lv_bseg-projk IS INITIAL.
        lv_error = 'E'.
        CALL METHOD lo_api_controller->get_message_manager
          RECEIVING
            message_manager = lo_message_manager.
        lv_message_string = 'WBS Element is a mandatory field'.
*     report message
        CALL METHOD lo_message_manager->report_error_message
          EXPORTING
            message_text = lv_message_string.
        EXIT.
      ENDIF.
    ENDIF.
    wa_bseg = lv_bseg.
    w_amt_line = wa_bseg-dmbtr + w_amt_line.
    wa_bseg-lifnr = lv_lifnr.
    APPEND wa_bseg TO lt_bseg.
    CLEAR wa_bseg,lv_bseg.
endloop.
but right now two things are happening in correctly:
1. It's doing the correct validation and throwing the correct error message but it's clearing out the content of the item table that user entered on the screen.
2. it's not making cost center as an non editable field.
can you please suggest me what I am doing wrong here.
Thanks,
Rajat
Edited by: rajatg on Jul 7, 2011 4:04 PM

    report message
        CALL METHOD lo_message_manager->report_error_message
          EXPORTING
            message_text = lv_message_string.
        EXIT.
your EXIT statement will get you out of the loop. rest of the records in internal table will nto be read

Action on hyperlink keeps getting called when doing other actions

Hello.
I have a jsf application created mostly with visual web pack, but with some custom code added. I have a table where one of the columns contains a hyperlink, which I created a custom action for. This action gets an HttpServletResponse and write urls to it with content type "audio/x-mpegurl".
Once this action has been called, any attempt to click on another link which calls this action will call the action twice. A third link click will cause it to be called three times. Any attempt to use a search button on the screen, or a table reorder link, will cause the action to be called (the number of times it was called from the last link click).
Is there some method I need to be called in order to clear something out?
Thanks in advance, and here's the code.
First the action
    public String recordingHyperlink_action() {
        try {
            String url;
            List<WarehouseQuestion> questions = null;
            Boolean isFullCase;
            isFullCase = getSessionBean1().isIsFullCall();
            log.debug("url is" + FacesContext.getCurrentInstance().getExternalContext().getRequestParameterMap().get("url"));
            if (FacesContext.getCurrentInstance().getExternalContext().getRequestParameterMap().get("url") == null) {
                url = null;
            } else {
                url = (String) FacesContext.getCurrentInstance().getExternalContext().getRequestParameterMap().get("url");
            if (isFullCase && url != null) {
                if (getSessionBean1().getKludgeKeyToDetail() != null) {
                    log.debug("In hyperlink action, getting key from url: " + url);
                    WarehouseDetail wd = getSessionBean1().getKludgeKeyToDetail().get(url);
                    if (wd != null) {
                        questions = wd.getQuestions();
                    } else {
                        log.error("warehouseDetail is null in hyperlink action but want full case is true");
                } else {
                    log.error("keyToDetail is null, but want full case is true... should be no results");
            getApplicationBean1().returnRecording(questions,url,isFullCase);
        } catch (IOException ex) {
            log.error("Error in hyperlink action for playing recording", ex);
        return null;
    }Then the writing to the response.
    public void returnRecording(List<WarehouseQuestion> questions, String url, Boolean isFullCall) throws IOException {
        ExternalContext econtext = getExternalContext();
        HttpServletResponse response = (HttpServletResponse) econtext.getResponse();
        ServletOutputStream sos = null;
        FacesContext fcontext = FacesContext.getCurrentInstance();
        try {
            sos = response.getOutputStream();
            if (isFullCall == null || isFullCall == false) {
                response.setContentType("audio/x-mpegurl");
                try {
                    sos.println(url);
                } catch (IOException ex) {
                    log.error("Error adding url to response: " + url, ex);
            } else {
                response.setContentType("audio/x-mpegurl");
                if (questions != null) {
                    for (WarehouseQuestion wq : questions) {
                        try {
                            sos.println(wq.getUrl());
                        } catch (IOException ex) {
                            log.error("Error adding url to playlist: " + wq.getUrl(), ex);
                } else {
                    log.error("returning playlist, questions is NULL!");
            sos.close();
        } catch (IOException ex) {
            log.error("Error setting output stream to response: " + url, ex);
        fcontext.responseComplete();
    }Sorry for the messy code, and thanks in advance for any help, this is really driving me nuts!

How odd.. this works as intended when called from a button with a static url, but now I can't access the param in the button, which I could in the hyperlink. Here's the jsp code for the two.
<ui:tableColumn binding="#{resultsPage.tableColumn7}" headerText="Recording" id="tableColumn7" sort="questionName">
    <ui:hyperlink action="#{resultsPage.recordingHyperlink_action}" binding="#{resultsPage.recordingHyperlink}"
                  id="recordingHyperlink" immediate="true" text="#{currentRow.value['questionName']}">
        
        <f:param name="url" value="#{currentRow.value['url']}"/>
    </ui:hyperlink>
    <ui:button action="#{resultsPage.recordingHyperlink_action}" binding="#{resultsPage.playRecordingButton}" escape="false"
               id="playRecordingButton" mini="true" text="Play">
        <f:param name="url" value="#{currentRow.value['url']}"/>
    </ui:button>
</ui:tableColumn>

ITunes getting "stuck" when I try to import my CD's

I see a lot of forums on this, but no clear answers. Has anyone found an answer?
I have a brand new ipod nano and my husband has a new IPod Classic we just bought for xmas

Why not put a CD in the drive, iTunes > Help >Run CD diagnostics
Then post the results here.

Why do I keep getting 'error' when I try to import .mov and .mp4?

I tried to import a mp4 clip into iMovie HD. Got an unknown error message. Then I converted the file from .mp4 to .mov. I got the same unknown error message.
How on earth do I import these files? Thansk

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Field in ALV not getting populated

Hi all,
           I need some help. I am displaying an ALV with fields.
    GROUP     G/L ACCOUNT     Local currency       USD     Period
       100              10                       5                       5           12
       100               11                      6                       4            12
now i have added an extra field TXT20 in the as last field of structure
    GROUP     G/L ACCOUNT     Local currency       USD     Period      TXT
       100              10                       5                       5           12          aa
       100               11                      6                       4            12         ab
TXT should come as 3rd coloumn in the output.
EXAMPLE:
     GROUP     G/L ACCOUNT       TXT      Local currency USD     Period
       100              10                      aa                  5              5           12
       100               11                     ab                   6             4            12
I have changed the coloumn positions in the field catalog accordingly and I have not written or changed any select queries from earlier output.
now my problem is PERIOD field is not getting populated in the ALv,the data is visible in the IT_FINAL which I am passing to Reuse_alv_grid_display. the field catalog is also getting build properly.
so plz suggest some changes so that I can move ahead.

Hi
I don't know what's the reason and now I have no environment to test it, but you can try other way:
1. define your fieldcate one by one as the sequence of your output like
      GROUP         G/L ACCOUNT          TXT           Local currency         USD          Period
      In this situation, you needn't use component -- position of fieldcate structure. Pay attention to
      fieldname in upper case.
   2. If only doing step1 has no effect, then adjust your structure of internal table. Sequence your
       component of IT_FINAL as the output field like step1.
   If still no effect, please let me know.

Currency Field - KOMK-WAERK not getting populated

Dear All,
In my infoset, i am reading the value from KONV table. But when i generate the infoset, system prompts a Warning Message saying:
Currency Field KOMK-WAERK will not be filled. Affected currency amount fields: (& it gives out the list of fields).
In my data section when i put TABLES KOMK, then the message does not appear, but the currency field still does not get populated when i execute the query.
Any suggestions as to how i can make the currency field populate in my output?
Await inputs.
Anyone to help?
Edited by: Vivek on Feb 9, 2008 8:51 PM

Is not KOMK a structure, you need to fill this structure. Try to map required fields as following :
CLEAR KOMK.
KOMK-MANDT = SY-MANDT.
KOMK-KALSM = VBDKR-KALSM.
KOMK-FKART = VBDKR-FKART.
KOMK-KAPPL = 'V'.
IF VBDKR-KAPPL NE SPACE.
KOMK-KAPPL = VBDKR-KAPPL.
ENDIF.
KOMK-WAERK = VBDKR-WAERK.
KOMK-KNUMV = VBDKR-KNUMV.
KOMK-VBTYP = VBDKR-VBTYP.
KOMK-BUKRS = VBDKR-BUKRS.
KOMK-BELNR = VBDKR-VBELN.
Regards

Need a field for purchase order quantity

We need a field that is fixed once the PO is created and is never updated even if the qty is changed later on.

Hi Chandra
Not clear with your query...
Are you looking for a field to act as a constant where you can store the PO Item Quantity which was initially created???
If so, not really sure on the reason but you can get the orginal qty value from Change Documents.
OBJECTID for Purchase Orders is <b>EINKBELEG</b>.
Kind Regards
Eswar

Autodetect text form fields-How do you get it to find all field areas?

I have 50 pages, all identical. I created in InDesign and its simply just a chart that is about 50 lines with 4 columns. It was created as a table also and very clean. I want each of those cells to be converted to text form fields in Acrobat. When I run the auto detect, it finds every one except the column on the far right and one of the cells on the very bottom with all 50 pages. I really need this to autodetect these or else I will have to do all those missing ones manually and that is a TON I will have to do and give unique names also which I really dont want to do! I have attached a screenshot of the form as is and another showing all the detected fields.

I don't think that there is a way to do, I think your only option is to add manually. If that column is the same size as last one on the right that it detected then you can copy>paste. But beware you may have to rename the field and double check your tabbing order when doing so.
If all your 50 pages have the exact same fields then get your 1st page setup. Then create page 2 and open your pdf with the correct fields, go to Document>Replaces Pages, and select page 2, so the same for all pages and then combine all pages into 1 pdf when finished (seems like a lot of steps but in my opinion faster then doing 50+ pages and however many fields). As long as your 1st page is the exact same field setup as all the rest this should prevent you from having to redo all 50 pages.

Needing AdjTrans field in OJDT to get ticked when doing a JE import via DTW

Similar Messages

Maybe you are looking for