Needing help with a simple button

Hey everyone
I'm wanting to put a link on my flash banner to an external website. I have followed the example here: http://help.adobe.com/en_US/FlashPlatform/reference/actionscript/2/help.html?content=00000 394.html
but it still doesnt seem to work as when I click the button I get the Adobe Flash Player Security box seen in the screenshot I have attached. I have click settings and added the website as a trusted source but the link still doesnt take me to the website. I'm using actionscript 2 on request.
Thanks in advance

You should test using a browser. I rarely run into that issue but I think you need to specify the location of the local swf file instead of the web url.

Similar Messages

Need help with Flash CS4 buttons/can't get buttons to control anything

Hello,
I need help with Flash CS4. I am making a banner with an animation (Image change into movie clip "3D Spiral") and added buttons but I cannot get the buttons to control the animation. Please help I am frustrated! If someone could help I would be most appreciated.

Thank you.
Regards,
Michael J. Sheehan allelois
Date: Mon, 17 Aug 2009 18:48:09 -0600
From: [email protected]
To: [email protected]
Subject: Need help with Flash CS4 buttons/can't get buttons to control anything
Hi there
I'm not sure how you wound up where you did. But you wound up in the Adobe Captivate forums. Please stand by as I move your thread to the Flash forums.
Cheers... Rick
>

Need help with a simple program (should be simple anyway)

I'm (starting to begin) writing a nice simple program that should be easy however I'm stuck on how to make the "New" button in the file menu clear all the fields. Any help? I'll attach the code below.
====================================================
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Message extends JFrame implements ActionListener {
     public void actionPerformed(ActionEvent evt) {
     text1.setText(" ");
     text2.setText("RE: ");
     text3.setText(" ");
     public Message() {
     super("Write a Message - by Kieran Hannigan");
     setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
     setSize(370,270);
     FlowLayout flo = new FlowLayout(FlowLayout.RIGHT);
     setLayout(flo);
     //Make the bar
     JMenuBar bar = new JMenuBar();
     //Make "File" on Menu
     JMenu File = new JMenu("File");
     JMenuItem f1 = new JMenuItem("New");f1.addActionListener(this);
     JMenuItem f2 = new JMenuItem("Open");
     JMenuItem f3 = new JMenuItem("Save");
     JMenuItem f4 = new JMenuItem("Save As");
     JMenuItem f5 = new JMenuItem("Exit");
     File.add(f1);
     File.add(f2);
     File.add(f3);
     File.add(f4);
     File.add(f5);
     bar.add(File);
     //Make "Edit" on menu
     JMenu Edit = new JMenu("Edit");
     JMenuItem e1 = new JMenuItem("Cut");
     JMenuItem e2 = new JMenuItem("Paste");
     JMenuItem e3 = new JMenuItem("Copy");
     JMenuItem e4 = new JMenuItem("Repeat");
     JMenuItem e5 = new JMenuItem("Undo");
     Edit.add(e5);
     Edit.add(e4);
     Edit.add(e1);
     Edit.add(e3);
     Edit.add(e2);
     bar.add(Edit);
     //Make "View" on menu
     JMenu View = new JMenu("View");
     JMenuItem v1 = new JMenuItem("Bold");
     JMenuItem v2 = new JMenuItem("Italic");
     JMenuItem v3 = new JMenuItem("Normal");
     JMenuItem v4 = new JMenuItem("Bold-Italic");
     View.add(v1);
     View.add(v2);
     View.add(v3);
     View.addSeparator();
     View.add(v4);
     bar.add(View);
     //Make "Help" on menu
     JMenu Help = new JMenu("Help");
     JMenuItem h1 = new JMenuItem("Help Online");
     JMenuItem h2 = new JMenuItem("E-mail Programmer");
     Help.add(h1);
     Help.add(h2);
     bar.add(Help);
     setJMenuBar(bar);
     //Make Contents of window.
     //Make "Subject" text field
     JPanel row2 = new JPanel();
     JLabel sublabel = new JLabel("Subject:");
     row2.add(sublabel);
     JTextField text2 = new JTextField("RE:",24);
     row2.add(text2);
     //Make "To" text field
     JPanel row1 = new JPanel();
     JLabel tolabel = new JLabel("To:");
     row1.add(tolabel);
     JTextField text1 = new JTextField(24);
     row1.add(text1);
     //Make "Message" text area
     JPanel row3 = new JPanel();
     JLabel Meslabel = new JLabel("Message:");
     row3.add(Meslabel);
     JTextArea text3 = new JTextArea(6,22);
     messagearea.setLineWrap(true);
     messagearea.setWrapStyleWord(true);
     JScrollPane scroll = new JScrollPane(text3,
                              JScrollPane.VERTICAL_SCROLLBAR_ALWAYS,
                              JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
     //SpaceLine
     JPanel spaceline = new JPanel();
     JLabel spacer = new JLabel(" ");
     spaceline.add(spacer);
     row3.add(scroll);
     add(row1);
     add(row2);
     add(spaceline);
     add(spaceline);
     add(row3);
     setVisible(true);
     public static void main(String[] arguments) {
     Message Message = new Message();
}

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

Need help with a simple process with FTP Adapter and File Adapter

I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jay

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

Need help with a simple basketball game.

Hi im new here and I need help with making this simple basketball game.
Im trying to recreate this game from this video. Im not sure if he is using as2 or as3
Or if anyone could help me make a game like this or direct me to a link on how to do it It would be greatly appreciated.

If you couldn't tell whether it is AS2 or AS3, it is doubtful you can turn it from AS2 into AS3, at least not until you learn both languages. There is no tool made that does it for you.

Im DROWNING! need help with a simple java assignment! plz someone help me!

i need help with my java assignment, with validating a sin number. easy for must who know java. im drowning... please help!

You will need to store each digit of the social insurance number in a field of its own. To validate the entry you will:
1. Multiply the 2nd, 4th, 6th and 8th digit by 2.
2. If the product of any of the four multiplications result in a value greater than 9, add the two resulting digits together to yield a single-digit response. For example 6 * 2 = 12, so you would add the 1 and the 2 to get a result of 3.
3. Add these four calculated values together, along with the 1st, 3rd, 5th, and 7th digits of the original number.
4. Subtract this sum from the next highest multiple of 10.
5. The difference should be equal to the 9th digit, which is considered the check digit.
Example of validating S.I.N. 765932546
1st digit 7
2nd digit (6*2 =12 1+2=) 3
3rd digit 5
4th digit (9*2 = 18 1+8 =) 9
5th digit 3
6th digit (2*2 = 4) 4
7th digit 5
8th digit (4*2 = 8) 8
Total 44 next multiple of 10 is 50
50-44 = 6 which is the 9th digit
Therefore the S.I.N. 765932546 is Valid
********* SIN Validation *********
Welcome - Please enter the first number: 120406780
Second digit value multiplied by 2 4
Fourth digit value multiplied by 2 8
Sixth digit value multiplied by 2 12
Eighth digit value multiplied by 2 16
Value derived from 6th digit 3
Value derived from 8th digit 7
The total is 30
Calculated digit is 10
Check digit must be zero because calculated value is 10
The SIN 120406780 is Valid
this is my assignemtn this is what i have! i dont know where to start! please help me!
/*     File:     sinnumber.java
     Author:     Ashley
     Date:     October 2006
     Purpose: Lab1
import java.util.Scanner;
public class Lab1
          public static void main(String[] args)
               Scanner input = new Scanner(System.in);
               int sin = 0;
               int number0, number1, number2, number3, number4, number5, number6, number7, number8;
               int count = 0;
               int second, fourth, sixth, eighth;
               System.out.print("\t\n**********************************");
               System.out.print("\t\n**********SIN Validation**********");
               System.out.print("\t\n**********************************");
               System.out.println("\t\nPlease enter the First sin number: ");
               sin = input.nextInt();
               count = int.length(sin);
               if (count > 8 || count < 8)
               System.out.print("Valid: ");
     }

I need help with some simple code! Please read!

hi everyone.
I'm having problems with a piece of code, and i'd be extremely greatful if somebody could give me a hand with it. I'm totally new to java and have to make a program for my university degree, but i'm finding it extremely difficult, mainly due to my total lack of apptitude for this type of thing. I know this is easy stuff, but the books I have are no use so any help would be greatly appreciated.
I have to write a program which uses two class files. I want one with the code to produce a simple button, and one to invoke it several times at different locations. I decided to write the program as one class file at first, and thought i'd be able to split it up at later. The program works fine when it is one class file. My book said that to split the two classes up, all i needed to do was change the second class to public, although this seems to not work at all. I'm at my wits end on this, and if anyone could correct my code I'd be eternally greatful.
Here is the first class... (sorry about the lack of indentation)
>>>>>>>>>>
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20);
>>>>>>>
This is the second class....
>>>>>>>
public class PhoneButton {
private Button butt;
public PhoneButton(int a, int b, int c){
setLayout(null);
butt = new Button();
butt.setBounds(a,b,20,20);
add(butt);
>>>>>>>>
My compiler generates errors relating to Button, but i can't do anything to please it.
Also, could anyone give me some pointers on how to add a different number or symbol to each button. That is what I added int c for, but i couldn't get it to work.
Cheers in advance.
Michael Morgan

I found that there are 5 error in your code.
1. You should import the "java.awt" package to the PhoneButton.java
2. The PhoneButton is not a kind of Component. You cannot not add it to the Phone class
3. the myButton = new PhoneButton(20, 20) does not provide enough parameters to create PhoneButton
4. You cannot add a Button to a PhoneButton. Becaue the PhoneButton is not a kind of Container
Fixed code:
import java.awt.*;
public class PhoneButton extends Button {
public PhoneButton(int a, int b, int c){
setBounds(a, b, 20, 20);
setLabel(String.valueOf(c));
===========================================
import java.awt.*;
import java.applet.Applet;
public class Phone extends Applet {
private Image image;
public void init() {
setLayout(null);
image = getImage(getDocumentBase(), "phone.jpg");}
public void paint (Graphics g) {
g.drawImage(image, 0, 0, 700, 530, this);
PhoneButton myButton;
myButton = new PhoneButton(20,20, 1);
======================
Visual Paradigm for UML - Full Features UML CASE tool
http://www.visual-paradigm.com/

Need help with a simple Rename/Join Domain/Install SCCM Client Task Sequence

Good morning everyone,
I need to create a very simple task sequence that will run an .exe that we have created that renames the computer based on a prefix-serialnumber...then restarts, adds it to our domain, restarts, and then installs the SCCM client.
1) run rename program
2) join to domain
3) install sccm client
Can someone help me with the steps that will be required for this?
Thank you very much!
**note, these will not be formatted/have an OS installation ran on it with this task sequence. The situation is that we are receiving 400+ custom configured laptops, and we're going to have to rename/join/install sccm on each...trying to simplify
this
any recommendations are greatly appreciated!

Narcoticoo : Which boot image am i supposed to be using to insure that it boots into Standard Windows, NOT WinPE? I have a standard x86 package / boot image i've been using. If it boots up with this, it goes into WinPE (correct me if I'm wrong,
for this seems to be what happens each time it boots off the boot image...it does not go into windows standard/full)
When I go into properties of the one i'm using, and take the check off of "Use a boot image", where it will not boot to WinPE, it will not even show up in my list of available task sequences for
1) when I PXE boot to try the task sequence, or
2) when I try to make stand-alone media for this task sequence as you have suggested
When I run the standalone media, the only log files I find are the following with errors:
PackageID = 'MPS0014E' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
BaseVar = '', ContinueOnError='' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
ProgramName = 'MPHS - Rename Computer' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
SwdAction = '0002' InstallSoftware
12/8/2014 12:28:36 PM 2344 (0x0928)
IsSMSV4PlusClient() == true, HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\installsoftware\main.cpp,332)
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Configuration Manager client is not installed
InstallSoftware 12/8/2014 12:28:36 PM
2344 (0x0928)
Process completed with exit code 2147500037
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the action: Install Package. Execution has been aborted
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Failed to run the last action: Install Package. Execution of task sequence failed.
Unspecified error (Error: 80004005; Source: Windows)
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Do not send status message in full media case
TSManager 12/8/2014 12:28:36 PM
1544 (0x0608)
Execution::enExecutionFail != m_eExecutionResult, HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmanager\tsmanager.cpp,866)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task Sequence Engine failed! Code: enExecutionFail
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)
Task sequence execution failed with error code 80004005
TSManager 12/8/2014 12:43:48 PM
1544 (0x0608)

I need help with a simple task (PLEASE HELP)

hi, you know how you can make a button and link it to a
different site with the actionscript in this program? well I need
to know of a way like...to make a button and...link it to the next
frame. ok, heres what im trying to make happen...the user presses a
button in the flash program thing and a comment apperars. then they
press it another time and a new one come up...and so on...I could
make like 50 different frames with new comments on them and then
make the button on each frame link to the next frame. is there a
way to do that? if there is I REALLY need your help. please
thanks :)

no need to modify anything - look at the first code:
on (release) {
nextFrame();
that's all you need on the button.
If you want it to happen on click and not release:
on (press) {
nextFrame();
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
mybluehair wrote:
> thank you so much. this will really help me. and, is
there any way I can modify
> that script so that its when the mouse is click, and not
the arrow keys?
>
>
>
>
quote:
Originally posted by:
Newsgroup User
> on (release) {
> nextFrame();
> }
>
> from the help docs (F1):
>
> nextFrame function
> nextFrame() : Void
>
> Sends the playhead to the next frame.
>
> Availability: ActionScript 1.0; Flash Player 2
>
> Example
> In the following example, when the user presses the
Right or Down arrow key,
> the playhead goes to
> the next frame and stops. If the user presses the Left
or Up arrow key, the
> playhead goes to the
> previous frame and stops. The listener is initialized to
wait for the arrow
> key to be pressed, and
> the init variable is used to prevent the listener from
being redefined if the
> playhead returns to
> Frame 1.
>
> stop();
>
> if (init == undefined) {
> someListener = new Object();
> someListener.onKeyDown = function() {
> if (Key.isDown(Key.LEFT) || Key.isDown(Key.UP)) {
> _level0.prevFrame();
> } else if (Key.isDown(Key.RIGHT) ||
Key.isDown(Key.DOWN)) {
> _level0.nextFrame();
> }
> };
> Key.addListener(someListener);
> init = 1;
> }
>
>
>
> ******************************************
> --> **Adobe Certified Expert**
> --> www.mudbubble.com
> --> www.keyframer.com
>
>
>
>
> mybluehair wrote:
> > hi, you know how you can make a button and link it
to a different site with
> the
> > actionscript in this program? well I need to know
of a way like...to make a
> > button and...link it to the next frame. ok, heres
what im trying to make
> > happen...the user presses a button in the flash
program thing and a comment
> > apperars. then they press it another time and a new
one come up...and so
> on...I
> > could make like 50 different frames with new
comments on them and then make
> the
> > button on each frame link to the next frame. is
there a way to do that? if
> > there is I REALLY need your help. please
> >
> > thanks :)
> >
>
>
>
>

Need help with audio on button ASAP THANKS!

Hi,
Using CS3 I added via properties audio to the "over" part of a gold button. The audio I added is 4Mb in size which I had imported to the library. When I selected "over" on the button and then using properties assigned the audio file .... the wave form appeared ... but not under "over" but over, down and hit. Thus when I publish what is happening is the page loads fine ... the audio begins to play on roll over as wanted ...
HERES THE GLITCH: if you accidently roll over again a new audio begins to play out of sync with the first one ... basically you get the row, row row your boat effect where each roll over audio is delayed.
MY FAILED SOLUTION: I tried to move the audio file and assign it via properties under hit. Thus have to have someone click on the sound. Yet the same outcome happend where the wave form appeared not just under hit but it showed on over, down and hit. The same thing happened when I tried assigning to "down".
MY QUESTIONS:
Is this caused by the sound file being too big? I tried a small audio beed and it would assign directly under the part I assigned but not with the bigger 4MB audio file.
If it is the size of the sound file, can I link the button to an external audio file. If so, what code would I use if I am using Action Script 2.0. I am very new at action script.
If it is not the size, could some one please tell me how to fix this glitch. I would be satisfied with the button working on either over or hit. If you wish to see what the button is doing, you can see it online at www.signaturehill.com.
THANKS.

Hi Erika,
That might just be what I need ... but I am confused as to where do put the action code. Can you help me with the following questions:
1. Did you put it inside the button via actionscript or did you select the button just and ad it there ... or somewhere else? Since I have several buttons doing the same thing on different pages, I am not sure where to put it.
2. What was the exact code you used ie on (release) {.... StopAllSounds(); } .... did you even use "release" or some other mouse event.
Please include the action script code I might try since I am very new to scripting. THANK YOU>

Need help with Motion Tracking-button in After Effects CS6

Hello I just bought After Effects cs6 and wanted to try ''motion tracking'' but I just can't push the motion tracking button. Is there anyone who can help me with that problem?
Responses are highly appreciated!

In order for the motion tracking buttons to become highlighted, you first need to select the clip you'd like to track in the timeline:

(Click and move to next scene). Need help with a simple action, just need a little guidance.

I am building a simple flash movie clip in Flash cs4. All I want to do is run the play head through a one 5 frame scene and stop, and then you press a button that will send the play head to the next 10 frame motion tween scene.
When I run the movie all I get is a movie clip that pauses for a millisecond then loops back around.
I have three different books on flash action script, read all three still not doing so hot. I am using the navigational button concept maybe that is what I am doing wrong. Can someone show me the right method or lead me in the right direction.
farosgfx ( [email protected] )

You can just place an invisible button on the top layer of
the flash time line and code it to getURL. When you said "hyperlink
to another page", are you referring to an html page or another swf
file? To make an invisible button in Flash, you can hit Ctrl+F8 to
bring up the dialog box to create a new symbol, name your button,
make sure you select the type of button, hit ok, now you are inside
the button and need to create a "hit" area. Click on the "hit"
state and press F7 to create a blank key frame. Using the drawing
tools, select the square, no stroke, and any fill color you want,
draw a square shape, click on the shape and in your Info Panel,
change the size of this shape to match the size of your stage,
lastly, make sure the registration point is (0,0) by using the
Align Panel. Go back to your main time line, add a layer on your
time line and make sure it's at the top, drag your new button from
the library to the stage and align it to (0,0).
There are two ways to code the button, so to make it easier,
click on the button once to select it, hit F9 to bring up the
actions panel and type this
on(release){
getURL("
http://www.someWebsite.com",
"_blank");// you can also use "_self" //
If some of this isn't new to you, disregard parts of it. If
you have any buttons in your Flash application, this will cause
problems because the invisible button will counter-act anything
below it. Let me know if this works for you. Of course, this all
assumes you have access to the flash file.

Need help with Cluster of Buttons displaying a message to which button is being pressed.

Create a VI with a cluster of six buttons labeled Option1…Option6. When executing, the VI should wait for the user to press one of the buttons. When a button is pressed, use the Display Message To User Express VI to indicate which option was selected. Repeat this process until the user presses the Stop button. The parameters of the problem needs me to use a while loop, case structure, a shift register and search 1d array. I'm just having trouble setting up my case structures and how to get the search 1d array to work with the cluster to find which button was pressed. I've attached a picture of my VI and also a VI I made without the cluster that does what I want the Cluster VI to do which is to recognize the button being pressed and bring up a prompt.
Solved!
Go to Solution.
Attachments:
Button Pressed.jpg ‏127 KB
Buttons Pressed No Cluster.jpg ‏189 KB

Okay so i moved the cluster into the while loop and wired a boolean true constant to the element of the search 1d array and now I can at least get the prompt for button 1 to display, but when I press the other buttons which I have set up the same way as button 1 I get no prompts so how can I get it to recognize the other buttons. Am I implementing the shift register incorrectly?
Attachments:
Button Pressed 2.jpg ‏115 KB

Need help with tool bar button to clear 10 fields on form

I have 167 forms with 138 fields, I need to blank out or clear just 10 of them or so, can I create a butotn or script that is outside each document so I can open each one, andc lick this button?
I don't want to add a button to all 167 pdf files. Or better yet script to open them all and blanks out the fields, evey form is the same so the field names are the same.

This would be easy to do as a batch process (aka Action). The following JavaScript will do it:
// Create an array with the list of fields to reset
var fa = ["text1", "text2", "text32", "text4", "text5", "text6", "text7", "text8", "text9", "text10"];
// Reset the fields
resetForm(fa);
This will set each of the named fields to its default value. If the default value might be different than blank, replace the last line with:
for (var i = 0; i < fa.length; i++) {
getField(fa[i]).value = "";
Replace "text1"..."text10" in the first line with the actual names of the fields you want to clear.

Need help with a "simple" problem :)

Hello everyone!!
I would be very glad if anyone could help me! I created a
test with AW and it works very well. My problem is that in the
".txt" file that is created (appendextfile), the "firsttrycorrect"
responses keep adding themselves among the exercices. How can I do
to set the count to zero, so that each exercise has is own number
of correct responses? Do I have to restart the file everytime??!
Thx in advance...

Just to be clear: You are using the FirstTryCorrect variable,
and you want
the FirstTryCorrect variable to reset when you go to the next
exercise? Try
Initialize(FirstTryCorrect) at the beginning of the next
exercise.
HTH;
Amy
"oukaischunomai" <[email protected]> wrote
in message
news:fmo42t$s7o$[email protected]..
> Thx to have read me :) I'll try to be clear, but I'm
sorry I don't know AW
> 7
> very well and my english is not that good...! So I'm
creating a program:
> first
> of all, the person has to enter her/his name
("username") and a .txt file
> is
> being created at her/his name. Then the person has to
click on a button
> to
> choose what she/he wants to study (she/he has the choice
between 3
> exercices:
> active/passive/relative sentences). In all exercises,
the person has to
> read a
> written sentence, then choose the image corresponding to
the sentence
> between 4
> choices and finally click on it (I created an
interaction and 3 responses
> have
> the "wrong" status and only 1 has the "correct" status).
Then it goes to
> the
> next sentence. At the end of each exercise
(active/passive/relative), the
> results are written in the .txt file previously created
(I simply put:
> AppendExtFile (Username^".txt"; FirstTryCorrect) ), so I
can have a
> feedback
> about the performances of the person... I hope it's
clear enough for the
> moment? :) My problem is: when the person begins the 2nd
exercise
> (passive),
> the correct responses are keeping adding themselves to
them of the 1st
> exercise
> (active). So my question is, how can I do, so that the
"correct response
> counter" is back to 0 at the beginning of each new
exercise??
>

Needing help with a simple button

Similar Messages

Maybe you are looking for