Needing some help with Time Capsule Error.  New to Apple Support and not super tech smart.

Can not get the MacBook Pro to back up to Time Capsule.  Can any one help me with the following Error Please?
The backup disk image “/Volumes/Data/XXXXXXXXXX MacBook Pro.sparsebundle” is already in use.

We don't see that error much but it is about the easiest to fix.
Pull the power on the TC.. count to 10. Plug the power back into the TC.
Viola.. working TC again.

Similar Messages

  • Really Need Some Help with CME 8.6 using IOS as Firewall and Anyconnect VPN on Phones

    Hello,
    I have a 2911 Router with IOS Security and Voice enabled and we are using CME 8.6.  I am using a built-in Anyconnect VPN on 3 phones that are for remote users and thus I needed to enable security zones on the router which works because the remote phones will boot up, get their phone configs and I am able to call those remote phones from an outside line.
    The issue I am having is that when I try to dial a remote phone connected via the VPN through port g0/0 from and internal office phone, i.e., NOT involving the PSTN then there is no audio.  It's as if no audio is going back and forth.  When I take off the security zones from the virtual-template interface and the g0/0 interface then the audio works great and I can reach the phone from internal as I am supposed to.
    Could someone take a peek at my security config and see why audio would not be traveling through the VPN when I have my security zones turned on?
    clock timezone PST -8 0
    clock summer-time PST recurring
    network-clock-participate wic 0 
    network-clock-select 1 T1 0/0/0
    no ipv6 cef
    ip source-route
    ip cef
    ip dhcp excluded-address 192.168.8.1 192.168.8.19
    ip dhcp pool owhvoip
     network 192.168.8.0 255.255.248.0
     default-router 192.168.8.1 
     option 150 ip 192.168.8.1 
     lease 30
    multilink bundle-name authenticated
    isdn switch-type primary-ni
    crypto pki server cme_root
     database level complete
     grant auto
     lifetime certificate 7305
     lifetime ca-certificate 7305
    crypto pki token default removal timeout 0
    crypto pki trustpoint cme_root
     enrollment url http://192.168.8.1:80
     revocation-check none
     rsakeypair cme_root
    crypto pki trustpoint cme_cert
     enrollment url http://192.168.8.1:80
     revocation-check none
    crypto pki trustpoint TP-self-signed-2736782807
     enrollment selfsigned
     subject-name cn=IOS-Self-Signed-Certificate-2736782807
     revocation-check none
     rsakeypair TP-self-signed-2736782807
    voice-card 0
     dspfarm
     dsp services dspfarm
    voice service voip
     allow-connections h323 to h323
     allow-connections h323 to sip
     allow-connections sip to h323
     allow-connections sip to sip
     fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
     vpn-group 1
      vpn-gateway 1 https://66.111.111.111/SSLVPNphone
      vpn-trustpoint 1 trustpoint cme_cert leaf
     vpn-profile 1
      host-id-check disable
    voice class codec 1
     codec preference 1 g711ulaw
    voice class custom-cptone jointone
     dualtone conference
      frequency 600 900
      cadence 300 150 300 100 300 50
    voice class custom-cptone leavetone
     dualtone conference
      frequency 400 800
      cadence 400 50 200 50 200 50
    voice translation-rule 1
     rule 1 /9400/ /502/
     rule 2 /9405/ /215/
     rule 3 /9410/ /500/
    voice translation-rule 2
     rule 1 /.*/ /541999999/
    voice translation-rule 100
     rule 1 /^9/ // type any unknown plan any isdn
    voice translation-profile Inbound_Calls_To_CUE
     translate called 1
    voice translation-profile InternationalType
     translate called 100
    voice translation-profile Local-CLID
     translate calling 2
    license udi pid CISCO2911/K9 sn FTX1641AHX3
    hw-module pvdm 0/0
    hw-module pvdm 0/1
    hw-module sm 1
    username routeradmin password 7 091649040910450B41
    username cmeadmin privilege 15 password 7 03104803040E375F5E4D5D51
    redundancy
    controller T1 0/0/0
     cablelength long 0db
     pri-group timeslots 1-12,24
    class-map type inspect match-any sslvpn
     match protocol tcp
     match protocol udp
     match protocol icmp
    class-map type inspect match-all router-access
     match access-group name router-access
    policy-map type inspect firewall-policy
     class type inspect sslvpn
      inspect 
     class class-default
      drop
    policy-map type inspect outside-to-router-policy
     class type inspect router-access
      inspect 
     class class-default
      drop
    zone security trusted
    zone security internet
    zone-pair security trusted-to-internet source trusted destination internet
     service-policy type inspect firewall-policy
    zone-pair security untrusted-to-trusted source internet destination trusted
     service-policy type inspect outside-to-router-policy
    interface Loopback0
     ip address 192.168.17.1 255.255.248.0
    interface Embedded-Service-Engine0/0
     no ip address
     shutdown
    interface GigabitEthernet0/0
     description Internet
     ip address dhcp
     no ip redirects
     no ip proxy-arp
     zone-member security internet
     duplex auto
     speed auto
    interface GigabitEthernet0/1
     ip address 192.168.8.1 255.255.248.0
     duplex auto
     speed auto
    interface GigabitEthernet0/2
     no ip address
     shutdown
     duplex auto
     speed auto
    interface Serial0/0/0:23
     no ip address
     encapsulation hdlc
     isdn switch-type primary-ni
     isdn incoming-voice voice
     no cdp enable
    interface Integrated-Service-Engine1/0
     ip unnumbered Loopback0
     service-module ip address 192.168.17.2 255.255.248.0
     !Application: CUE Running on NME
     service-module ip default-gateway 192.168.17.1
     no keepalive
    interface Virtual-Template1
     ip unnumbered GigabitEthernet0/0
     zone-member security trusted
    ip local pool SSLVPNPhone_pool 192.168.9.1 192.168.9.5
    ip forward-protocol nd
    ip http server
    ip http authentication local
    no ip http secure-server
    ip http path flash:/cme-gui-8.6.0
    ip route 192.168.17.2 255.255.255.255 Integrated-Service-Engine1/0
    ip access-list extended router-access
     permit tcp any host 66.111.111.111 eq 443
    tftp-server flash:apps31.9-3-1ES26.sbn
    control-plane
    voice-port 0/0/0:23
    voice-port 0/3/0
    voice-port 0/3/1
    mgcp profile default
    sccp local GigabitEthernet0/1
    sccp ccm 192.168.8.1 identifier 1 priority 1 version 7.0 
    sccp
    sccp ccm group 1
     bind interface GigabitEthernet0/1
     associate ccm 1 priority 1
     associate profile 1 register CME-CONF
    dspfarm profile 1 conference  
     codec g729br8
     codec g729r8
     codec g729abr8
     codec g729ar8
     codec g711alaw
     codec g711ulaw
     maximum sessions 4
     associate application SCCP
    dial-peer voice 500 voip
     destination-pattern 5..
     session protocol sipv2
     session target ipv4:192.168.17.2
     dtmf-relay sip-notify
     codec g711ulaw
     no vad
    dial-peer voice 10 pots
     description Incoming Calls To AA
     translation-profile incoming Inbound_Calls_To_CUE
     incoming called-number .
     port 0/0/0:23
    dial-peer voice 20 pots
     description local 10 digit dialing
     translation-profile outgoing Local-CLID
     destination-pattern 9[2-9].........
     incoming called-number .
     port 0/0/0:23
     forward-digits 10
    dial-peer voice 30 pots
     description long distance dialing
     translation-profile outgoing Local-CLID
     destination-pattern 91..........
     incoming called-number .
     port 0/0/0:23
     forward-digits 11
    dial-peer voice 40 pots
     description 911
     destination-pattern 911
     port 0/0/0:23
     forward-digits all
    dial-peer voice 45 pots
     description 9911
     destination-pattern 9911
     port 0/0/0:23
     forward-digits 3
    dial-peer voice 50 pots
     description international dialing
     translation-profile outgoing InternationalType
     destination-pattern 9T
     incoming called-number .
     port 0/0/0:23
    dial-peer voice 650 pots
     huntstop
     destination-pattern 650
     fax rate disable
     port 0/3/0
    gatekeeper
     shutdown
    telephony-service
     protocol mode ipv4
     sdspfarm units 5
     sdspfarm tag 1 CME-CONF
     conference hardware
     moh-file-buffer 90
     no auto-reg-ephone
     authentication credential cmeadmin tshbavsp$$4
     max-ephones 50
     max-dn 200
     ip source-address 192.168.8.1 port 2000
     service dnis dir-lookup
     timeouts transfer-recall 30
     system message Oregon's Wild Harvest
     url services http://192.168.17.2/voiceview/common/login.do 
     url authentication http://192.168.8.1/CCMCIP/authenticate.asp  
     cnf-file location flash:
     cnf-file perphone
     load 7931 SCCP31.9-3-1SR4-1S.loads
     load 7936 cmterm_7936.3-3-21-0.bin
     load 7942 SCCP42.9-3-1SR4-1S.loads
     load 7962 SCCP42.9-4-2-1S.loads
     time-zone 5
     time-format 24
     voicemail 500
     max-conferences 8 gain -6
     call-park system application
     call-forward pattern .T
     moh moh.wav
     web admin system name cmeadmin secret 5 $1$60ro$u.0r/cno/OD2JmtvPq4w9.
     dn-webedit 
     transfer-digit-collect orig-call
     transfer-system full-consult
     transfer-pattern .T
     fac standard
     create cnf-files version-stamp Jan 01 2002 00:00:00
    ephone-template  1
     softkeys connected  Hold Park Confrn Trnsfer Endcall ConfList TrnsfVM
     button-layout 7931 2
    ephone-template  2
     softkeys idle  Dnd Gpickup Pickup Mobility
     softkeys connected  Hold Park Confrn Mobility Trnsfer TrnsfVM
     button-layout 7931 2
    ephone-dn  1  dual-line
     number 200
     label Lisa
     name Lisa Ziomkowsky
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  2  dual-line
     number 201
     label Dylan
     name Dylan Elmer
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  3  dual-line
     number 202
     label Kimberly
     name Kimberly Krueger
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  4  dual-line
     number 203
     label Randy
     name Randy Buresh
     mobility
     snr calling-number local
     snr 915035042317 delay 5 timeout 15 cfwd-noan 500
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  5  dual-line
     number 204
     label Mark
     name Mark McBride
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  6  dual-line
     number 205
     label Susan
     name Susan Sundin
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  7  dual-line
     number 206
     label Rebecca
     name Rebecca Vaught
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  8  dual-line
     number 207
     label Ronnda
     name Ronnda Daniels
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  9  dual-line
     number 208
     label Matthew
     name Matthew Creswell
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  10  dual-line
     number 209
     label Nate
     name Nate Couture
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  11  dual-line
     number 210
     label Sarah
     name Sarah Smith
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  12  dual-line
     number 211
     label Janis
     name Janis McFerren
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  13  dual-line
     number 212
     label Val
     name Val McBride
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  14  dual-line
     number 213
     label Shorty
     name Arlene Haugen
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  15  dual-line
     number 214
     label Ruta
     name Ruta Wells
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  16  dual-line
     number 215
     label 5415489405
     name OWH Sales
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  17  dual-line
     number 216
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  18  dual-line
     number 217
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  19  dual-line
     number 218
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  20  dual-line
     number 219
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  21  dual-line
     number 220
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  22  dual-line
     number 221
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  23  dual-line
     number 222
     label Pam
     name Pam Buresh
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  24  dual-line
     number 223
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  25  dual-line
     number 224
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  26  dual-line
     number 225
     label Elaine
     name Elaine Mahan
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  27  octo-line
     number 250
     label Shipping
     name Shipping
    ephone-dn  28  dual-line
     number 251
     label Eli
     name Eli Nourse
     call-forward busy 500
     call-forward noan 500 timeout 10
    ephone-dn  29  dual-line
     number 252
    ephone-dn  30  dual-line
     number 253
    ephone-dn  31  octo-line
     number 100
     label Customer Service
     name Customer Service
     call-forward busy 500
     call-forward noan 500 timeout 12
    ephone-dn  32  octo-line
     number 101
     label Sales
     name Sales
     call-forward busy 214
     call-forward noan 214 timeout 12
    ephone-dn  33  dual-line
     number 260
     label Conference Room
     name Conference Room
     call-forward busy 100
     call-forward noan 100 timeout 12
    ephone-dn  100
     number 300
     park-slot timeout 20 limit 2 recall
     description Park Slot For All Company
    ephone-dn  101
     number 301
     park-slot timeout 20 limit 2 recall
     description Park Slot for All Company
    ephone-dn  102
     number 302
     park-slot timeout 20 limit 2 recall
     description Park Slot for All Company
    ephone-dn  103
     number 700
     name All Company Paging
     paging ip 239.1.1.10 port 2000
    ephone-dn  104
     number 8000...
     mwi on
    ephone-dn  105
     number 8001...
     mwi off
    ephone-dn  106  octo-line
     number A00
     description ad-hoc conferencing
     conference ad-hoc
    ephone-dn  107  octo-line
     number A01
     description ad-hoc conferencing
     conference ad-hoc
    ephone-dn  108  octo-line
     number A02
     description ad-hoc conferencing
     conference ad-hoc
    ephone  1
     device-security-mode none
     mac-address 001F.CA34.88AE
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:2 2:31
    ephone  2
     device-security-mode none
     mac-address 001F.CA34.8A03
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:12
    ephone  3
     device-security-mode none
     mac-address 001F.CA34.898B
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
    ephone  4
     device-security-mode none
     mac-address 001F.CA34.893F
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
    ephone  5
     device-security-mode none
     mac-address 001F.CA34.8A71
     ephone-template 1
     max-calls-per-button 2
     username "susan"
     paging-dn 103
     type 7931
     button  1:6
    ephone  6
     device-security-mode none
     mac-address 001F.CA34.8871
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:7 2:31 3:32
    ephone  7
     device-security-mode none
     mac-address 001F.CA34.8998
     ephone-template 1
     max-calls-per-button 2
     username "matthew"
     paging-dn 103
     type 7931
     button  1:9
    ephone  8
     device-security-mode none
     mac-address 001F.CA36.8787
     ephone-template 1
     max-calls-per-button 2
     username "nate"
     paging-dn 103
     type 7931
     button  1:10
    ephone  9
     device-security-mode none
     mac-address 001F.CA34.8805
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:5
    ephone  10
     device-security-mode none
     mac-address 001F.CA34.880C
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:14
    ephone  11
     device-security-mode none
     mac-address 001F.CA34.8935
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:3
    ephone  12
     device-security-mode none
     mac-address 001F.CA34.8995
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:8 2:31
    ephone  13
     device-security-mode none
     mac-address 0021.5504.1796
     ephone-template 2
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:4
    ephone  14
     device-security-mode none
     mac-address 001F.CA34.88F7
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:23
    ephone  15
     device-security-mode none
     mac-address 001F.CA34.8894
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:26
    ephone  16
     device-security-mode none
     mac-address 001F.CA34.8869
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:28 2:27
    ephone  17
     device-security-mode none
     mac-address 001F.CA34.885F
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:11
    ephone  18
     device-security-mode none
     mac-address 001F.CA34.893C
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:27
    ephone  19
     device-security-mode none
     mac-address 001F.CA34.8873
     ephone-template 1
     max-calls-per-button 2
     paging-dn 103
     type 7931
     button  1:27
    ephone  20
     device-security-mode none
     mac-address A456.3040.B7DD
     paging-dn 103
     type 7942
     vpn-group 1
     vpn-profile 1
     button  1:13
    ephone  21
     device-security-mode none
     mac-address A456.30BA.5474
     paging-dn 103
     type 7942
     vpn-group 1
     vpn-profile 1
     button  1:15 2:16 3:32
    ephone  22
     device-security-mode none
     mac-address A456.3040.B72E
     paging-dn 103
     type 7942
     vpn-group 1
     vpn-profile 1
     button  1:1
    ephone  23
     device-security-mode none
     mac-address 00E0.75F3.D1D9
     paging-dn 103
     type 7936
     button  1:33
    line con 0
    line aux 0
    line 2
     no activation-character
     no exec
     transport preferred none
     transport input all
     transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
     stopbits 1
    line 67
     no activation-character
     no exec
     transport preferred none
     transport input all
     transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
    line vty 0 4
     transport input all
    scheduler allocate 20000 1000
    ntp master
    ntp update-calendar
    ntp server 216.228.192.69
    webvpn gateway sslvpn_gw
     ip address 66.111.111.111 port 443  
     ssl encryption 3des-sha1 aes-sha1
     ssl trustpoint cme_cert
     inservice
    webvpn context sslvpn_context
     ssl encryption 3des-sha1 aes-sha1
     ssl authenticate verify all
     policy group SSLVPNphone
       functions svc-enabled
       hide-url-bar
       svc address-pool "SSLVPNPhone_pool" netmask 255.255.248.0
       svc default-domain "bendbroadband.com"
     virtual-template 1
     default-group-policy SSLVPNphone
     gateway sslvpn_gw domain SSLVPNphone
     authentication certificate
     ca trustpoint cme_root
     inservice
    end

    I think your ACL could be the culprit.
    ip access-list extended router-access
     permit tcp any host 66.111.111.111 eq 443
    Would you be able to change the entry to permit ip any any (just for testing purpose) and then test to see if the calls function properly.  If they work fine then we know that we need to open som ports there.
    Please remember to select a correct answer and rate helpful posts

  • I need some help with my ipod-the screen is frozen on do not disconnect

    this morning i went to sync my ipod with itunes to update it but when i plugged it in to my computer it said do not disconnect but the screen froze before it even connected to itunes.... now the screen is frozen on do not disconnect and the ipod won't even turn off. anyone have any suggestions?

    Try Resetting your iPod. Toggle the hold switch off and on a few times then hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear then the menu button to go to the normal display: iPod isn't responding it appears to be frozen

  • Error 1603: Need some help with this one

    When installing iTunes I first get an error box saying
    "Error 1406: Could not write value to key \Software\classes\.cdda\OpenWithList\iTunes.exe. Verify that you have sufficient access to that key, or contact your support personnel."
    The second one (after I click on Ignore on the last box) I get it this one:
    "Error: -1603 Fatal error during installation.
    Consult Windows Installer Help (Msi.chm) or MSDN for more information"
    Strange thing is that I do have full access to my computer (or atleast in all other cases I have had since I am the only one with an account on it).
    I have done my best in trying to solve it myself but I'm running out of ideas. I have downloaded latest versions from the website and tried installing Quicktime separately. I have also tried removing Quicktime using add/or remove programs though I just I didn't dare to take full removal because it said something about system files.
    Anyway I really need some help with this, anyone got any ideas?
    Greets,
    Sixten
      Windows XP Pro  

    Do you know how to count backwards? Do you know how to construct a loop? Do you know what an autodecrementor is? Do you know how to use String length? Do you know Java arrays start with index 0 and run to length-1? Do you know you use length on arrays too? Do you know what System.out.println does?
    Show us what you have, there isn't anything here that isn't easily done the same as it would be on paper.

  • Need some help with downloading PDF's from the net.

    need some help with downloading PDF's from the net.  Each time I try to click on a link from a website, if it takes me to a new screen to view a pdf, it just comes up as a blank black screen?  any suggestions?

    Back up all data.
    Triple-click the line of text below to select it, the copy the selected text to the Clipboard (command-C):
    /Library/Internet Plug-ins
    In the Finder, select
    Go ▹ Go to Folder
    from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens (command-V), then press return.
    From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
    The "Silverlight" web plugin distributed by Microsoft can also interfere with PDF display in Safari, so you may need to remove it as well, if it's present.
    If you still have the issue, repeat with this line:
    ~/Library/Internet Plug-ins
    If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again.

  • Need some help with MDX formula

    Hello, I am not finding any good documentation on MDX formulas, there is a specific one that I need some help with....could someone please elaborate what exactly does this formula mean? thanks.
    (MEASURES.[SIGNEDDATA],
    CLOSINGPERIOD([%TIMEDIM%].
    [%TIMEBASELEVEL%]))

    If new MEASURE gets added to Measure's table , in BPC Client , etools->client Options-> Refresh Dimensions should get the new measure into the CurrentView .IF not try  etools->client Options-> Clear Local application information .
    Formula 2 : 
    (MEASURES.SIGNEDDATA,
    CLOSINGPERIOD(%TIMEDIM%.
    %TIMEBASELEVEL%))
    This formula is used to retrieve AST & LEQ account values.
    If current time member is at monthlevel ,ie  ClosingPeriod of  2011.FEB is  the current member it self ,and would retrieve 2011.FEB value.
    If Current time member is at quarter level then ClosingPeriod of 2011.Q1 is 2011.Mar  ,and would retrieve 2011.MAR value.
    If Current time member is at year level then ClosingPeriod of 2011.TOTAL is 2011.DEC  ,and would retrieve 2011.DEC value.
    Formula 1 :
    MEASURES.SIGNEDDATA
    Irrespective of the level of the Time , MEASURES.SIGNEDDATA would retrieve current Time member value.This formula is used to retrieve INC & EXP account values
    if current time member is at month level,2011.FEB , 2011.FEB value is retrieved.
    if current time member is at quarter level,2011.Q1 , 2011.Q1(JANFEBMAR)  value is retrieved.
    if current time  member is at year level,2011.TOTAL , 2011.TOTAL(JAN,FEB,....,DEC)  value is retrieved.
    Hope this helps.

  • I NEED SOME HELP WITH UPDATING MY IPOD TOUCH PLEASE

    i need some help with my ipod the version is 3.1.3 and every time I'm trying to update it says it can not be restored then it says unknown error so i need some help updating my ipod to version 4.2

    If you mean you're trying to update your ios go to settings/general/software update. then you should see the latest ios just tap it and it will automatically update your ipod. If you're trying to restore your ipod (as it's not quite clear in your query) try doing it through itunes instead of on the device itself

  • Please I need some help with a table

    Hi All
    I need some help with a table.
    My table needs to hold prices that the user can update.
    Also has a total of the column.
    my question is if the user adds in a new price how can i pick up the value they have just entered and then add it to the total which will be the last row in the table?
    I have a loop that gets all the values of the column, so I can get the total but it is when the user adds in a new value that I need some help with.
    I have tried using but as I need to set the toal with something like total
        totalTable.setValueAt(total, totalTable.getRowCount()-1,1); I end up with an infinite loop.
    Can any one please advise on some way I can get this to work ?
    Thanks for reading
    Craig

    Hi there camickr
    thanks for the help the other day
    this is my full code....
    package printing;
    import java.awt.*;
    import java.awt.event.*;
    import java.awt.print.*;
    import javax.swing.*;
    import javax.swing.table.*;
    import java.text.DecimalFormat;
    public class tablePanel
        extends JDialog  implements Printable {
      BorderLayout borderLayout1 = new BorderLayout();
      private boolean printing = false;
      private Dialog1 dialog;
      JPanel jPanel = new JPanel();
      JTable table;
      JScrollPane scrollPane1 = new JScrollPane();
      DefaultTableModel model;
      private String[] columnNames = {
      private Object[][] data;
      private String selectTotal;
      private double total;
      public tablePanel(Dialog1 dp) {
        dp = dialog;
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      public tablePanel() {
        try {
          jbInit();
        catch (Exception exception) {
          exception.printStackTrace();
      private void jbInit() throws Exception {
        jPanel.setLayout(borderLayout1);
        scrollPane1.setBounds(new Rectangle(260, 168, 0, 0));
        this.add(jPanel);
        jPanel.add(scrollPane1, java.awt.BorderLayout.CENTER);
        scrollPane1.getViewport().add(table);
        jPanel.setOpaque(true);
        newTable();
        addToModel();
        addRows();
        setTotal();
    public static void main(String[] args) {
      tablePanel tablePanel = new  tablePanel();
      tablePanel.pack();
      tablePanel.setVisible(true);
    public void setTotal() {
      total = 0;
      int i = table.getRowCount();
      for (i = 0; i < table.getRowCount(); i++) {
        String name = (String) table.getValueAt(i, 1);
        if (!"".equals(name)) {
          if (i != table.getRowCount() - 1) {
            double dt = Double.parseDouble(name);
            total = total + dt;
      String str = Double.toString(total);
      table.setValueAt(str, table.getRowCount() - 1, 1);
      super.repaint();
      public void newTable() {
        model = new DefaultTableModel(data, columnNames) {
        table = new JTable() {
          public Component prepareRenderer(TableCellRenderer renderer,
                                           int row, int col) {
            Component c = super.prepareRenderer(renderer, row, col);
            if (printing) {
              c.setBackground(getBackground());
            else {
              if (row % 2 == 1 && !isCellSelected(row, col)) {
                c.setBackground(getBackground());
              else {
                c.setBackground(new Color(227, 239, 250));
              if (isCellSelected(row, col)) {
                c.setBackground(new Color(190, 220, 250));
            return c;
        table.addMouseListener(new MouseAdapter() {
          public void mouseClicked(MouseEvent e) {
            if (e.getClickCount() == 2) {
            if (e.getClickCount() == 1) {
              if (table.getSelectedColumn() == 1) {
       table.setTableHeader(null);
        table.setModel(model);
        scrollPane1.getViewport().add(table);
        table.getColumnModel().getColumn(1).setCellRenderer(new TableRenderDollar());
      public void addToModel() {
        Object[] data = {
            "Price", "5800"};
        model.addRow(data);
      public void addRows() {
        int rows = 20;
        for (int i = 0; i < rows; i++) {
          Object[] data = {
          model.addRow(data);
      public void printOut() {
        PrinterJob pj = PrinterJob.getPrinterJob();
        pj.setPrintable(tablePanel.this);
        pj.printDialog();
        try {
          pj.print();
        catch (Exception PrintException) {}
      public int print(Graphics g, PageFormat pageFormat, int pageIndex) throws PrinterException {
        Graphics2D g2 = (Graphics2D) g;
        g2.setColor(Color.black);
        int fontHeight = g2.getFontMetrics().getHeight();
        int fontDesent = g2.getFontMetrics().getDescent();
        //leave room for page number
        double pageHeight = pageFormat.getImageableHeight() - fontHeight;
        double pageWidth =  pageFormat.getImageableWidth();
        double tableWidth = (double) table.getColumnModel().getTotalColumnWidth();
        double scale = 1;
        if (tableWidth >= pageWidth) {
          scale = pageWidth / tableWidth;
        double headerHeightOnPage = 16.0;
        //double headerHeightOnPage = table.getTableHeader().getHeight() * scale;
        //System.out.println("this is the hedder heigth   " + headerHeightOnPage);
        double tableWidthOnPage = tableWidth * scale;
        double oneRowHeight = (table.getRowHeight() +  table.getRowMargin()) * scale;
        int numRowsOnAPage = (int) ( (pageHeight - headerHeightOnPage) / oneRowHeight);
        double pageHeightForTable = oneRowHeight *numRowsOnAPage;
        int totalNumPages = (int) Math.ceil( ( (double) table.getRowCount()) / numRowsOnAPage);
        if (pageIndex >= totalNumPages) {
          return NO_SUCH_PAGE;
        g2.translate(pageFormat.getImageableX(), pageFormat.getImageableY());
    //bottom center
        g2.drawString("Page: " + (pageIndex + 1 + " of " + totalNumPages),  (int) pageWidth / 2 - 35, (int) (pageHeight + fontHeight - fontDesent));
        g2.translate(0f, headerHeightOnPage);
        g2.translate(0f, -pageIndex * pageHeightForTable);
        //If this piece of the table is smaller
        //than the size available,
        //clip to the appropriate bounds.
        if (pageIndex + 1 == totalNumPages) {
          int lastRowPrinted =
              numRowsOnAPage * pageIndex;
          int numRowsLeft =
              table.getRowCount()
              - lastRowPrinted;
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(oneRowHeight *
                                     numRowsLeft));
        //else clip to the entire area available.
        else {
          g2.setClip(0,
                     (int) (pageHeightForTable * pageIndex),
                     (int) Math.ceil(tableWidthOnPage),
                     (int) Math.ceil(pageHeightForTable));
        g2.scale(scale, scale);
        printing = true;
        try {
        table.paint(g2);
        finally {
          printing = false;
        //tableView.paint(g2);
        g2.scale(1 / scale, 1 / scale);
        g2.translate(0f, pageIndex * pageHeightForTable);
        g2.translate(0f, -headerHeightOnPage);
        g2.setClip(0, 0,
                   (int) Math.ceil(tableWidthOnPage),
                   (int) Math.ceil(headerHeightOnPage));
        g2.scale(scale, scale);
        //table.getTableHeader().paint(g2);
        //paint header at top
        return Printable.PAGE_EXISTS;
    class TableRenderDollar extends DefaultTableCellRenderer{
        public Component getTableCellRendererComponent(
          JTable table,
          Object value,
          boolean isSelected,
          boolean isFocused,
          int row, int column) {
            setHorizontalAlignment(SwingConstants.RIGHT);
          Component component = super.getTableCellRendererComponent(
            table,
            value,
            isSelected,
            isFocused,
            row,
            column);
            if( value == null || value .equals("")){
              ( (JLabel) component).setText("");
            }else{
              double number = 0.0;
              number = new Double(value.toString()).doubleValue();
              DecimalFormat df = new DecimalFormat(",##0.00");
              ( (JLabel) component).setText(df.format(number));
          return component;
    }

  • Need some help with putting a folder in users directory

    I'm not sure how to do this, but what I want to do is put this file in C:/My Documents, but I need to be able to verify that C://My Documents exists, if not put it in C:/Program Files.
    Can any one help me out?
    try {
                        String[] contactArray = parseDatFile(fc.getSelectedFile());
                        Document document = createXMLDocument(contactArray);
                        saveToXMLFile(
                        document,
                        new File(
                        "C:/Program Files/xxx/",// looks for directory for list
                        "xxxxxxxxxxxxxxxxxxxxxxxxxxxx"));
                    } catch (Exception exc) {
                        File f = new File("C:/Program Files/xxx/");// setting directory for list if not there
                        boolean yes = true;
                        yes = f.mkdir();// creating directory
                        try {
                            String[] contactArray = parseDatFile(fc.getSelectedFile());
                            Document document = createXMLDocument(contactArray);
                            saveToXMLFile(
                            document,
                            new File(
                            "C:/Program Files/xxx/",// used only if the directory didn't exist
                            "xxxxxxxxxxxxxxxxxxxxxxx"));

    Need some help with putting a folder in users directoryI recomend using System.getProperty( "user.home" ) not a hard-coded value.
    This will use the users home folder ( C:\My Documents ) on Win9X (I guess), C:\Documents and Settings\<current user> on Win2K +, and ~ on Unix-a-likes.

  • Need some help with threads...

    Hello all,
    I am working on a project at work, and I am not the best programmer in the world. I have been trying to get my head around this for a couple of days and just cannot get it to work.
    I am writing an instrumentation control program that will have three threads. One is the GUI, one will receive control information and set up the hardware, and one will check the hardware status and report it to the GUI periodically. I plan on using the invokeLater() method to communicate the status to the GUI and change the status display in the GUI. Communication from the GUI to the controller thread and from the status thread to the controller thread I had planned on being piped input/output stream as appropriate. I have a control class and a status class that need to be communicated over these piped streams. In some trial code I have been unable to wrap the piped input/output streams with object input/output streams. I really need some help with this. Here is the main thread code:
    package playingwiththreads1;
    import java.io.*;*
    *public class PlayingWithThreads1 {*
    public static void main(String[] args) {*
    * PipedOutputStream outputPipe = new PipedOutputStream();*
    * ObjectOutputStream oos = null;*
    * ReceiverThread rt = new ReceiverThread(outputPipe);*
    // Start the thread -- First try*
    * Thread t = new Thread(rt);*
    t.start();*
    // Wrap the output pipe with an ObjectOutputStream*
    try*
    oos = new ObjectOutputStream(outputPipe);*
    catch (IOException e)*
    System.out.println(e);*
    // Start the thread -- Second try*
    //Thread t = new Thread(rt);*
    //t.start();*
    /** Send an object over the pipe. In reality this object will be a
    class that contains control or status information */
    try
    if (!oos.equals(null))
    oos.writeObject(new String ("Test"));
    catch (IOException e)
    try
    Thread.sleep(5000);
    catch (InterruptedException e)
    I read somewhere that it matters where you start the thread relative to where you wrap piped streams with the object streams. So, I tried the two places I felt were obvious to start the thread. These are noted in the comments. Here is the code for the thread.
    package playingwiththreads1;
    import java.io.*;
    public class ReceiverThread implements Runnable {
    private PipedInputStream inputPipe = new PipedInputStream();
    private ObjectInputStream inputObject;
    ReceiverThread (PipedOutputStream outputPipe)
    System.out.println("Thread initialization - start");
    try
    inputPipe.connect(outputPipe);
    inputObject = new ObjectInputStream(inputPipe);
    catch (IOException e)
    System.out.println(e);
    System.out.println("Thread initialization - complete");
    public void run()
    System.out.println("Thread started");
    try
    if (inputObject.available() > 0)
    System.out.println(inputObject.read());
    catch (IOException e)
    System.out.println(e);
    Through testing I have determined that no matter where I start the thread, the thread never gets past the "inputObject = new ObjectInputStream(inputPipe);" assignment.
    Could someone please help me with this? There are other ways for me to write this program, but this is the one that I would like to make work.
    Many thanks in advance,
    Rob Hix
    Edited by: RobertHix on Oct 6, 2009 3:54 AM

    Thanks for the help, but that did not work. I tried flushing the ObjectOutputStream and it is still hanging when initializing the thread.
    Here is a better look at the code since I was helped to figure out how to insert it:
    The main method:
    package playingwiththreads1;
    import java.io.*;
    public class PlayingWithThreads1 {
        public static void main(String[] args) {
            PipedOutputStream outputPipe = new PipedOutputStream();
            ObjectOutputStream oos = null;
            ReceiverThread rt = new ReceiverThread(outputPipe);
            // Start the thread -- First try
            //Thread t = new Thread(rt);
            //t.start();
            // Wrap the output pipe with an ObjectOutputStream
            try
                oos = new ObjectOutputStream(outputPipe);
                oos.flush();
            catch (IOException e)
                System.out.println(e);
            // Start the thread -- Second try
            Thread t = new Thread(rt);
            t.start();
            /* Send an object over the pipe.  In reality this object will be a
             * class that contains control or status information */
            try
                if (!oos.equals(null))
                    oos.writeObject(new String ("Test"));
                    oos.flush();
            catch (IOException e)
                System.out.pringln(e);
            try
                Thread.sleep(5000);
            catch (InterruptedException e)
    }The thread code:
    package playingwiththreads1;
    import java.io.*;
    public class ReceiverThread implements Runnable {
        private PipedInputStream inputPipe = new PipedInputStream();
        private ObjectInputStream inputObject;
        ReceiverThread (PipedOutputStream outputPipe)
            System.out.println("Thread initialization - start");
            try
                inputPipe.connect(outputPipe);
                inputObject = new ObjectInputStream(inputPipe);
            catch (IOException e)
                System.out.println(e);
            System.out.println("Thread initialization - complete");
        public void run()
            System.out.println("Thread started");
            try
                if (inputObject.available() > 0)
                    System.out.println(inputObject.read());
            catch (IOException e)
                System.out.println(e);
    }Does anyone else have and ideas?

  • I Need Some Help With My Dreamweaver

    Hello, there i need some help with my dreamweaver i already made a forum about this but that one i maded didnt make sense soo i will make it more details in it soo i will tell you what i did i tell you what i downloed and all that just now but i tell you the things what it does i downloaded Adobe Design and Web Premium CS6 its a 30 day trial then and now i will tell you the details look below please
    Details
    Soo i opened my start menu then went on all programs then clicked on Adobe Design and Web Premium CS6 then i clicked on the dreamweaver CS6 then when i clicked on it i heard my computer shut down then it shuted down when i opened it straight away then it turns it self back on
    What did i do about this when it happened?
    I made a question so please can telll me what to do or what ever
    Why did i download it?
    i downloaded it because i am making a website and i want to use dreamweaver CS6 because i use notepad++ i do not like the notepad++ its harder and dreamweaver helps a bit i think because i watched a video of it
    What if you dont have an answer?
    Well, i will be very angry because i am making a good website its gonna be my frist publish website ever i made 20 websites but i never published them i deleted them because i wiped my computer
    What kind of Computer Do You have?
    System:
    Micfosoft windows xp
    Media Center Edition
    Version 2002
    Service Pack 2
    Computer
    ei-system
            intel(R)
    pentium(R) 4 CPU 3.20ghz
    3.20 ghz, 960 MB of RAM
    Btw i am using dreamweaver CS6 if you fogot and dont say add more details because there is alot off details there and if you help me i will show u the whloe code when i am done but leave ur emaill address below
    (C) Connor McIntosh

    No.
    Service Pack 3 just updates your OS. All of your files, folders and programs will still be there.
    You will start running into more problems like this the longer you stick with XP though. That particular OS is over 11 years old, service pack 3 hs been out for over 4 years.
    It may be time for a system upgrade. I personally went from XP to Windows 7 and I haven't looked back one bit.

  • Need some help with a Macally enclosure and a spare internal drive

    Need some help with a Macally enclousure
    Posted: Oct 1, 2010 10:55 AM
    Reply Email
    Aloha:
    I have a Macally PHR-S100SUA enclousure that does not recognise,my WD 1001fals hard drive. It has worked just fine with other internal drives, but not this one?
    This is a spare internal drive that I am trying to make an external drive to store back ups for a lot of data. But so far I can not get it recognized by the computer. Maybe I need different drivers?
    Any suggestions?
    Dan Page

    Hi-
    Drivers aren't typically needed for external enclosures.
    Macally has none listed for that enclosure.
    The same is true for the WD drive, internal or external; no drivers.
    With the exception of high end PM multi drive enclosures, I can't think of any that use drivers.
    How is the external connected?
    Have you tried different cables, different ports?
    Bad/damaged cables are fairly common.
    Have you verified connections inside of the enclosure?

  • Need some help with the Select query.

    Need some help with the Select query.
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    select single vkorg abgru from ZADS into it_rej.
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
            VKORG TYPE VBAK-VKORG,
            ABGRU TYPE VBAP-ABGRU,
           END OF IT_REJ.
    This is causing performance issue. They are asking me to include the where condition for this select query.
    What should be my select query here?
    Please suggest....
    Any suggestion will be apprecaiated!
    Regards,
    Developer

    Hello Everybody!
    Thank you for all your response!
    I had changes this work area into Internal table and changed the select query. PLease let me know if this causes any performance issues?
    I had created a Z table with the following fields :
    ZADS :
    MANDT
    VKORG
    ABGRU.
    I had written a select query as below :
    I had removed the select single and insted of using the Structure it_rej, I had changed it into Internal table 
    select vkorg abgru from ZADS into it_rej.
    Earlier :
    IT_REJ is a Work area:
    DATA : BEGIN OF IT_REJ,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    Now :
    DATA : BEGIN OF IT_REJ occurs 0,
    VKORG TYPE VBAK-VKORG,
    ABGRU TYPE VBAP-ABGRU,
    END OF IT_REJ.
    I guess this will fix the issue correct?
    PLease suggest!
    Regards,
    Developer.

  • Do i need air extreme with time capsule?

    Do I need Airport Extreme with Time Capsule?

    A Time Capsule is an AirPort Extreme...with a built in hard drive.
    If you have a Time Capsule, you would not need an AirPort Extreme unless you wanted to install the Extreme at another location in your home and have it "extend" the Time Capsule network to provide more wireless signal coverage.

  • Need some help with ".png" image.

    Good day everyone. Here's the run down. I need to add an
    image (image "A") ontop of another image (image"B"). Image "B" is a
    paterned background. And Image "A" a logo with a transparent
    background.
    As it stands I have image "A" as a "png" and as you know....
    they are fri**ing huge! Haveing it as a "gif" only presents me with
    the IE6 problem of it adding a colored background to the image.
    So I'm stuck! Can any one tell me or point me in the
    difection of a tutorial to tell me the best way to add an image
    with a transparent background in Dreamweaver.
    Really need some help with this!
    Thanks all!

    >Right you can see the work in progress here>
    http://www.stclairecreative.com/DoughBoys_Site_Folder/home.html
    Before going much further I'd recommend reconsidering the use
    of a textured background. They are usually included for the benefit
    of the site owner only, and likely to annoy visitors. Studies on
    the subject suggest they often lead to usability problems. I do
    like to header graphic, but at 200K it's kinda heavy and can
    probably be optimized.

Maybe you are looking for

  • [E2013][EWS-XML][EWSTOOL] Calendar item body not visible in outlook

    Hi, after upgrading to Exchange 2013 SP1 we experience the issue that appointments created using EWS by our ERP application don't show the body in Outlook 2010/2013. The appointment body is only visible in OWA or on Active Sync devices. Outlook just

  • How can I retry my iPod without using iTunes?

    Is that possible??

  • Barely fumbling though site creation...HELP!!!

    Okay, so here's the deal. Slowly but surely we're trying to create a website using Dreamweaver MX 2004. Now I'm trying to upload the pages and on the images an error message comes up: "An FTP error occurred-cannot put Image.gif. Access denied. The fi

  • Userexit in me21n

    Hi techies, in me21n i have to provide validation check for quantity fld for a perticular storage location(i.e, qty should not exceed say 1000 ,if qty>1000,give error msg ) can u help me out with exact exit name thanks in advance

  • Twist touch pad and track ball not working

    Hello -  We have a Thinkpad Twist S230u with an intel i7 processor.  The touchpad and trackball have not worked for quite some time (last 9 months or so) - my boss used this computer and just put up with it, using a wireless mouse.  I am now trying t