Needing Sound Recommenda​tions for a New Living Room TV

I am in need of some solid TV recommendations for my living.  I currently have a 65" Plasma that the sun coming through the windows destroys the picture.  I guess I needed to do more homework before I made the purchase.  I love the TV so despite my wife being totally against it, I am going to put it in my bedroom. 
With that being said, is there a television (60" or larger) that anyone can recommend that works perfectly in those conditions?  I know it would be cheaper to buy drapes, but I want to do it right this time.  Any recommendations would be much appreciated.  I have about three months before I return from my deployment to make a decision.  Time is definitely on my side.  Thanks  

Might not be a bad idea to have a consultation done. My go to TV for rooms with a lot of lighting is LGs. They're really improved the past few years and prefer them over sharp. I would mainly stay away from Samsung. Even though they're awesome TV's, they tend to put a glossy finish on them. I also love Panasonic plamas, but plasmas have a glass screen which produces glare.
I am a Home Theater Geek Squad Installer. I know my stuff and love to give advice, but don't hold me responsible when you screw something up because you decided to do it yourself instead of having a professional do it.

Similar Messages

  • Your recommenda​tion for a new HP Photosmart All-in-one​.

    Could I get your recommendations for a new HP Photosmart All-in-one.  My old Photosmart #C5180 died. I loved that machine - it made excellent copies, was a wonderful printer and scanner and made excellent photographs, and it lived for many years.  What would be your recommendations for a new Photosmart that would be similar to my old one and hopefully use the same cartridges,  HP02, which I have a supply of.  Thanks for your any recommendations that anyone would volunteer.

    Railway,
    Unfortunately no current model of printer is going to support those cartridges.
    Here is a link to our current photosmart models:
    http://shopping.hp.com/en_US/home-office/-/product​s/Printers/HP%20Photosmart
    All of those are great printers. If you are looking to occasionaly send faxes, then the 7510 would be the one you would want to go with. It has eFax on it, which is faxing over a internet connection, without the use of a phone line. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Need a recommenda​tion for a DJ speaker setup

    what loudspeakers, subwoofer, and accessories should I get for small to medium venues.I already have a full stanton setup (mixer/two tables/) and have a laptop I use too. I just have only used stereo equipment and done house partys but want to step it up and I am not sure what to buy and the Best Buy I work at does not have a musical instrument department.
    Solved!
    Go to Solution.

    Lot's of different options, and it sounds like you've determined what size of setup you want.  If your going to be doing small party's, I would recommend two powered speakers, since you already have the tables and mixer.  And the powered speakers will help in the ease of setup also.  If you can find them, there still may be some out there in Best Buy, but they are discontinued, I would look into getting two Thump15's by Tapco.  They put out alot of volume and would be great for a DJ setup.  And obviously you could upgrade from that to Mackies, or EV's.  Just depends on the price range.  Please give us a call if you have any more questions.  Thanks!  Randy Smith  M.I. sup Tempe, AZ 480.303.7251 

  • Ai changed my email for my apple id, but i can't change my iCloud ccount because i can't remember my old password, and now i need to use iCloud for my new IPhone but it isn't working, how do i fix that?

    i changed my email for my apple id, but i can't change my iCloud  account because i can't remember my old password, and now i need to use iCloud for my new IPhone but it isn't working, how do i fix that?

    If the old ID is yours, and if your new ID was created by editing the details of this old ID (rather than being an entirely new ID), go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID.  Click edit next to the primary email account, change it back to your old email address and save the change.  Then edit the name of the account to change it back to your old email address.  You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll.  When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud).  Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was.  Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

  • MSI 970A-G46 | Needs to be Exchanged for a new one |

    Yup, some stuff happened to it and now I need to exchange it for a new one.
    Can someone please show me where I can do that? Thanks

    Quote from: Gregrs on 18-September-14, 07:59:01
    I just had it looked at by an IT professional, he said that it's the motherboard, so it's not an easy fix.
    Anyways, here is my whole computer >>> http://pcpartpicker.com/p/J3YPf7
    Definition of "IT professional" varies widely and could mean almost anything...  He may be right; he may be wrong.  You're a bit elusive on the "stuff happened to it" topic so I'm thinking he may well be right in this case...  Nichrome has the correct place to start: where you bought it from.  Plead ignorance...and it may be they'll take pity on you.  Then again, their pity might extend only as far as you paying the going rate for a new board.  Won't hurt to ask, though: often we do not receive simply because we don't ask...

  • Do I need a mouse pad for my new Mac mouse

    Do I need a mouse pad for my new Magic Mouse

    I assume you mean a wireless mouse.  It would be helpful  The hard surface of a desk is not so kind to it.   I use a square of fine black artist's felt and Hoover it now and then to keep the dust down.

  • Do I need a USB superdrive for my new Mac Air?

    Do I need a USB superdrive for my new Mac Air if I already have an iMac OS X 10.5 which has a DVD slot?

    If you have another PC or Mac with a DVD drive, you can use it for your MacBook Air with Remote Disc > http://support.apple.com/kb/HT5287?viewlocale=en_US
    This solution works for some tasks, but not for others, so the best way is to buy an external optical drive for your Mac

  • Need Laptop Recommendation - best for Adobe Premiere Pro editing

    I am in the process of looking for a new laptop and need recommendations based on how I will use the laptop.  I produce video and mainly use the following programs: Adobe Photoshop, Adobe Premiere Pro CS2, Adobe Encore DVD.  I also use other photo editing software such as AutoFX PGE7.0.
    I currently have an HP Pavilion which is about 5 years old.  This desktop has the following specs:
    HP Pavilion PU131AV / a1050y, Windows XP MCE, SP3 32bit, Nvidia GeForce 6600, Intel Pentium 4 CPU, 3.20 GHz, 2GB of RAM
    I believe that with a new laptop, I could create my videos more efficiently.  If you have any input as to what I need in a laptop for my specific purposes, please let me know.
    Thanks so much,
    Angela

    Harm,
    Thank you for your response.  I have yet to buy the new computer but will be doing so in the next couple of days.  I read the links you provided, and another thread which discussed the performance of a laptop vs a desktop.  I have changed my mind and will be purchasing a desktop.  I need advice concerning this purchase, but will start a new discussion to do so.
    Thanks so much,
    Angela

  • Guest WLAN need to re-authenticate for each new tab

    Hi,
    We installed recently a new WLC 2504 with 22 AP's.
    We use web authentication for the guest WLAN.
    The porblem is : users can login and authenticate but whenever the open a new webbrowser tab they need to re-authenticate again.
    And this for each new tab they open.
    Anybody knows how to solve this?

    No, the user shouldn't have to reauthenticate for every tab they open, once the clients entry is built in the MSCB they should stay in a RUN state until either the reauth timer or the user idle timer expire.
    First I'd upgrade to 7.0.220.0 and see if that resolves the issue.  If it doens't get a TAC case open.
    Steve

  • HP 3D DriveGuard Needed or Recommende​d for SSD Drive?

    I recently replaced the standard drive on my HP 2730p with an Intel SSD X-18. I did a clean install and the driver for the HP 3D DriveGuard shows missingof course so my question is - do I need or should I install this driver if I have an SSD in my laptop now?
    Many thanks.
    This question was solved.
    View Solution.

    It is not needed.
    There are no platters and read/wrire heads to worry about in a Solid State hard disk. The are no moving parts so no heads to get jogged or bumped which could cause data loss. With an SSD drive it is also recommended to avoid defragmenting. Your new drive is cutting edge technology. 
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Recommenda​tions for Upgrading

    I purchased a W520 last year around this time.
    Have been very happy with it so far. I am at that point now where I am looking for more. 
    What is the first upgrade I should do?
    I have...
    - 8GB of ram
    -160 GB SSD it came with (thinking about upgrading here)
    - i7 2760
    -windows 7 pro
    I have never cloned hard drives before is it hard?
    Thanks

    The W520 is a relatively new model. (Certain users would rather hang on to it than upgrading to the latest W530.) That means all the components cannot be considered "out of date." The main bay, in particular, supports SATA 6Gbit/s or, as certain people put it, SATA III.
    Your 160GB SSD, which I suppose to be Intel, supports SATA 3Gbit/s. You may want to upgrade to a SSD of higher storage capacity and, most likely, the new SSD supports SATA 6Gbit/s although I doubt the increase in transfer speed will bring any perceptible improvements.
    I'd recommend bumping the RAM up to 16GB total. Although your applications might not need all of it, Windows SuperFetch can take full advantage of the available RAM.
    Cloning? Use Acronis True Image, for example. Very easy.

  • Need ideas and stuff for a new laptop or netbook.

     Need ideas. I'm lookin to buy a new laptop soon. Next couple months. I want something that runs good, runs fast, doesn't have a lot of junk installed on it and something below $700 dollars (may pay more...just depends). Any brands that are good? I thought maybe getting a netbook because I really just need some small storage and an awesome internet. Would a netbook be good for that?  I use verizon wireless on my laptop right now but I'm going to switch to AT&T soon.

    In todays world of Net Books, 250 GB and 2 gb configurations are becoming standard. However, a majority of the Net Books out there still have the standard 1gb and 160gb hard drive configurations. You can upgrade the hard drives and memory in the newer Acer Netbooks now because of the redesign the did to the casing. The 8.9 inch net books Acer came out with could not allow the hardware upgrades because of their initial proprietary casing design. But with hacking and warranty voiding someone did it.
    The bare minimum price you can expect to pay for a Net Book is $299 on average for the majority specs I posted. For better specs you will pay more for them.
    Please always buy an optical drive with a Netbook or purchase a $399 laptop in the end for better flexibility.
    *******DISCLAIMER********
    I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

  • I now need sound switch up for audio to play out

    I Alway use my iPad to watch tv and until yesterday it didn't need to have the sound switch unmuted. Why do I now need to have sound active for the sound to play on a video?

    Hello bkarschnick,
    Thanks for contacting Apple Support Communities.
    Your computer may not supply audio via the Mini DisplayPort. Take a look at this article for your compute and find out if it supplies  audio.
    About Mini DisplayPort to HDMI adapters
    http://support.apple.com/kb/HT4241
    If your computer is on the list that should supply audio and video, then take a look at this to adjust your sound output.
    OS X Mavericks: Adjust your computer’s sound output
    http://support.apple.com/kb/PH13908
    Regards,
    Jeff D.

  • Do I need a screen protector for my New iPad with retina display?

    I have a screen protector on my new iPad with retina display, but does this effect the screen display and do I really need a screen protector on?

    So I just got my first ever iPad (4th gen) about 4 days ago. I am waitng on a case and have been looking into a screen protector, debating this same question on quality. I have a 3 year old and he is dying to play with it. In the meantime I cannot stress how careful I have been, as Im sure you all know what Im talking about.  Last night I was using it on my lap and my shirt tugged it off, causing me to grab it before it fell. Of course the longest, sharpest nail, caught it for me. Obviously I freak out and hurry to clean the screen to see for damage. I see there is a huge line where my nail caught it, but upon cleaning was no longer there. This nail was sharper than any key I own! So I guess what im going to do is get a complete cover for use with my 3 year old and just a basic one when I use it. Good job apple!

  • Need a recommenda​tion on a DAQ to finish this configurat​ion

    I am currently putting together a setup that includes the following items:
                 1: Motor Driver - Aries AR-01xx  from Parker
                 2: NI UMI -7774
                 3: Motor - Direct Drive Rotary Table from Parker that is listed under rotary positioners on their website
                 4: PCI DAQ is unknown at this time.
    I am pretty new with motion control and I am trying to see if there is a DAQ/setup out there for a PC that would allow me to interface with items 1-3.  I was thinking a NI PCI-7342 might work since I only intend to use 2-axis and it also comes with NI Motion Control.  Or is there a better setup that I should use to interface to the motor driver?  I already know that items 1 and 3 work together I just need to be able to interface LabVIEW 8.6 to the motor driver? 
    Any help would be greatly appreciated.
    Thanks,
    Ginzu

    Ginzu,
    I don't expect every user being an expert in the NI acronym jungle , but I just wanted to make it clear, that there is a significant difference between these two product lines. Sometimes there are some misunderstandings (Q: "How can I program my 73xx board with NI-DAQmx?" A: "You can't. You need to use NI-Motion" ) and I wanted to avoid this siutation.
    Jochen
    Message Edited by Jochen on 09-18-2008 03:37 PM

Maybe you are looking for