Needle stuck in top mic while cleaning? PROBLEM

Hello,
I had a problem with mic, when I was recording videos there was no sound after while playing them only "shhh"... I have read here somewhere to try to remove the dirt from the tiny hole on the top of the Iphone..I was cleaning my top mic with a needle and the needle crashed and a little piece left in the top mic. How to get it out?

Have you done a power reset? This often clears out your system when glitches like this occur.
Try this:
http://support.apple.com/kb/HT1411

Similar Messages

  • Headphones mode and top mic simultaneously not working

    A few days my iphone 4 get in headphones mode. first i thought it was maybe that because i was in a very hot place, the iphone could get damaged, anyway, the day after the speaker mic (top mic) stopped working as well, i cleaned the headphones jack and the mic. Now its not stuck in headphones mode, but i cant use the speaker, record videos or use facetime. Any idea?
    Thanks

    Hi again toxyyy,
    Thank you for the quick reply!
    Based on the information provided in your post, I recommend following this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). This should restore the original software and hardware drivers that came with your computer. Once the software installation has completed, please follow this document on using the HP Support Assistant to update your system's drivers.
    For the XP component of your computer, I recommend following this document on No sound (Windows 98, ME, and XP). This should help to restore the sound on the XP side of your Operating System.
    Please re-post with the results of your troubleshooting, and I look forward to your reply!
    Regards       
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Headphone mode and top mic simultaneously not working

    A few days my iphone 4 get in headphones mode. first i thought it was maybe that because i was in a very hot place, the iphone could get damaged, anyway, the day after the speaker mic (top mic) stopped working as well, i cleaned the headphones jack and the mic. Now its not stuck in headphones mode, but i cant use the speaker, record videos or use facetime. Any idea?
    Thanks

    sayounus wrote:
    Please confirm if you would like to have logs(rar file) of my mobile?
    This is a user-to-user community support forum. We are not BlackBerry employees, but volunteers who enjoy assisting other users. BlackBerry personnel rarely comment on queries posted here. You would have noticed this in the message upon registration and noted at the top of each page of this forum site.f
    You can try an OS upgrade if you want. What is your Operating System loaded to your device?  From the main screen, swipe down from the top black bezel to Settings > About... what is the OS Version listed there?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • S930 stuck at Lenovo screen while boot up.

    My S930 stuck at lenovo screen while boot up.
    I tried to leave the phone while waiting for it to boot until the battery drain out.
    Then charged till full , try to boot again and it still stuck at the same lenovo screen..
    What to do? How to reset / factory default ?
    Please help. TQ

    Issue :- G500 Lenovo laptop screen gets stuck at lenovo screen and does not allow to do any thing alternatively need to power off laptop.
    I am also having this same problem occasionally. In that case if my screen stuck at lenovo screen then I turn off my laptop, After while when I turn it on then problem go off. But today same method did not help me, finally I removed  my batter for a while then plugged it again which again resolved the issue.
    I purchased my G500 lenovo laptop 4 or 5 months ago , it had been working fine for first 3 months but after it I encountered with this probelm.
    I updated my bios with latest available version but that also not helped me
    My concern is that why this problem is occuring occasionally. Request you to share valuable steps and guide us to get rid off from this problem.
    Thanks and Regards
    Ashok Dewan

  • My iphone 3gs is stuck at recovery mode while updating software 4.3.3

    my iphone 3gs is stuck at recovery mode while updating software 4.3.3 and even itunes is not responding . and i m using newest software of itunes on mac. please help.

    If you followed all of the steps within that article then it's almost always a hardware issue. Reason being is that if you attempted restoring the iPhone from another computer (as the article informs you to), and you are still stuck in recovery mode, it proves that it is not a problem with the iTunes installation on your computer.
    - Greg

  • When I click on 2014 month view in calendar iPhone 5 s stucks, lagging. What is the problem I don't know????

    When I click on 2014 month view in calendar iPhone 5 s stucks, lagging. What is the problem I don't know????

    Should read 'When I '''clicked''' on your update this a.m......

  • ASR Hyper-v (VMM) to Azure and we are stuck with this error while preparing the VMM Server

    We are stuck with this error while installing ASR provider and registering with Azure Vault, can i get some help on this
    Error:
    NO Vaults could be retried for the registration key. Please ensure that
    1, your registration key has not expired.You can re-downloading registration key from Azure site Recovery portal
    2, Your system clock is not out of sync with the selected system time zone
    System Clock is set to IST and Azure to southeastasia

    Hi,
    Could you please ensure that you have downloaded the latest registration key from the portal?
    Also ensure that the machine from where you are accessing the portal and the VMM server has the right time according to your time zone.
    Thank you,
    Ruturaj

  • Unable to select Quantitative data during creation of MIC while using  Clas

    *Unable to select Quantitative data during creation of MIC while using  Class characterstics*
    Dear All,
    I want to transfer MIC Result recording to Batch class.
    For that, i am trying to create MIC & giving class characteristic name in QS21, and then under control data,     I am unable to select, Quantitative. By default system is selecting Qualitative. But I want to create that MIC as Quantitative.
    Is there any setting for this?
    Please help...
    Thanks in advance
    Edited by: Sitarami Reddy  Kummeta on Nov 30, 2009 6:44 PM

    Hi
    to have master inspection characteristic quantitative ,the  class characteristic must be of  format "NUM":
    Regards
    Sujit

  • Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!!

    Dear Friends, My Iphone 4s is stuck in recovery mode while trying to update to iso 6. I tried restoring it but unable to do so. gives me error 36 and goes back to recovery mode. I tried all the steps but no luck. anyone? Please Help!!

    This writeup comes from the article referenced below it:
    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694#error1

  • Getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep

    getting Problem while publishing Problem while publishing java.lang.IllegalArgumentExcep while deploying persistance with ejb sample application into cloud. can any one please tell me why i am getting this?

    Hi Goutham,
    I am facing the same issue. Please let me know how you have resolved it.

  • I deleted my albums from Facebook while cleaning my iPhoto archive.. Does anyone know if i can get them back and how? thanks!

    i deleted my albums from Facebook while cleaning my iPhoto archive.. Does anyone know if i can get them back and how? thanks!

    while cleaning my iPhoto archive
    What do you mean by that?  Do you mean you deleted photos or albums from your iPhoto Library?
    You best solution is to use Time Machine to restore your library from just before you "cleaned your iPhoto archive".

  • HT5035 I found 2 cards while cleaning my daughters room... How can I find out if there is a balance on the cards still?

    I found 2 cards while cleaning my dtrs bedroom, how can I find out if there is a balance on them still?

    Has the strip been removed on the back of the card revealing its number :
    If it hasn't then you can be pretty sure that they haven't been redeemed. Otherwise the only way to know for sure is by trying to redeem them

  • PCI Express X-FI Xtreme Audio - Mic and mixer problems

    6PCI Express X-FI Xtreme Audio - Mic and mixer problems' Trouble started two days ago when I updated to the latest X-FI drivers. Now I have no mixer and I can't figure out how to get my mic to work. The only thing that has changed is the updating of drivers. I am using senheiser headphones with mic for use on ventrillo. In the old set up I could go into the mixer and tell the software that the Line-In was a mic and it would work perfectly. Now I can't get the mic to work at all since there is no creative mixer. The windows mixer doesn't allow you to do anything worth wild.
    I don't have the old software so I can't go back to the old setup. I am using Vista 64. What the heck am I doing wrong? Why won't the software now recognize that I am plugging in a mic!?!?!?
    BAH!!!!
    PLEASE HELP!

    Doesn't Vista have some sort of automatic checkpointing feature that gives you a way to back up to a point before you updated the drivers?
    -Dave
    ?[email protected]

  • Recording from external mic while recording music from internal device?

    Not sure where to ask this? I'm rather new to MAC. I was under the impression GARAGE BAND would be able to record my vocals from an external mic while playing an audio either from an internal mp3 or CD? I don't see how if so?
    I simply wish to record vocals over an instrumental song from mp3 or CD, but I am unsure how to do this on my IMAC? On my old PC, I was able to just use WINAMP to play whatever audio while recording my vocals over it with COOL EDIT? Is there some thing I'm missing here? Can I do this with Garage band or what do I need to get to do this?
    Also, I've plugged my external mic in, went into my preferences to set "audio line in" and it doesn't pick up my voice? What am I doing wrong?
    Thanks in advance

    Hi Wil3,
    Best place would be to ask this question in the GarageBand forum which you can find here:
    http://discussions.apple.com/forum.jspa?forumID=1120
    Kryten

  • PS stuck to top menu.  Unable to 'detach' to floating window...  Please help!

    I opened Ps as normal and went to drag it to a second monitor and botch it by letting finger slip off mouse.  Now Ps is stuck to top menu bar.  Unable to make it a floating window.  It says it's in 'Standard Screen Mode'...  ???

    It looks like Window menu > Application Frame was checked.
    You can try checking it on and off.
    Or reset the workspace:
    Window menu > Workspace > Reset Workspace
    Or last resort: Reset Preferences:
    Press and hold Cmd - Shift - Opt immediately upon cold-starting Photoshop.  If you get the keys down quickly enough - and you have to be VERY quick - it will prompt you to confirm deletion of your established preferences, which will lead to them all being set to defaults.

Maybe you are looking for

  • How to print out the Forms and Table fields relationship, data mapping?

    I create a forms and tables relationship inside the Form Developer 11g, once I created the Data relationships between the form data field and the Table column name. I don't have any command to print it out, such as Layout Wizard. Are there any progra

  • Backing up/archiving songs/loops on an external drive rop

    I have some questions about backing up songs. I want to verify that this is correct. I want to make sure that I get everything backed up since my home computer crashed and you never know when something could happen to my work computer. I know in orde

  • Hash key - anyone?

    Hi This may seem daft but I can't find a hash key anywhere on my Macbook - not even in special characters. As these are often used in passwords it would be useful to have it. Can anyone help please? AJ

  • IPod just won't update!

    Hi, I bought another iPod video today (after the first broke!) and just like that one, it won't update! It's currently running "Version 1.2" and whenever I load up iTunes, it tells me there is an update available, but when I click to update it takes

  • How to Save Command Output to Flash on ASA 8.4

    Hi, I nice easy one for you guys. How do you save the command output from the CLI  to a file on flash? With IOS, I would normally use a pipe command to redirect to tftp, but the ASA doesn't support this as far as I can tell. As a work around I was th