Needs Clarification for Certification exam 11g OCP

Hi,
Friends, Kingly guide me. I'm under huge pressure. I'm preparing for Oracle 11g for last 6 months and attend the training as well but I've some fear regarding exam. what I've seen in the sample question that there are mostly cramming question as well in the exam. Please tell me how can I pass the exam. Some time it seems to me that Working in Oracle is easy but passing certification is Hercules Job. Can I use to exam simulation engine recommended by oracle to pass the certification exam.(selftest.com)
Will it guarantee that I'll pass the exam. You all are aware that no one can memorize the whole book provided by Oracle corporation. Please guide me because it will get costly for me as I have to purchase the engine and If I not succeed I'll get huge financial lost as well. As whole month salary will be spent on single paper. Ill going to appear in the exam in next week I belong from Asian region, it'll be costly for me. Please guide me in this regard.
Regards,
Vicky

user13021221 wrote:
Hi,
Friends, Kingly guide me. I'm under huge pressure. I'm preparing for Oracle 11g for last 6 months and attend the training as well but I've some fear regarding exam. what I've seen in the sample question that there are mostly cramming question as well in the exam. Please tell me how can I pass the exam. Some time it seems to me that Working in Oracle is easy but passing certification is Hercules Job. Can I use to exam simulation engine recommended by oracle to pass the certification exam.(selftest.com)
Will it guarantee that I'll pass the exam. You all are aware that no one can memorize the whole book provided by Oracle corporation. Please guide me because it will get costly for me as I have to purchase the engine and If I not succeed I'll get huge financial lost as well. As whole month salary will be spent on single paper. Ill going to appear in the exam in next week I belong from Asian region, it'll be costly for me. Please guide me in this regard.
Regards,
VickyIn general the Oracle and / or Sybex books, when they are avaialble for an exam, inlcude sample questions and practice exams on cdroms are a failry effective indicator of where you are in process.
I would imagine the self test simulator is even better.
They is no guarentee ever of passing the exam; there is just a real probability.
You may be under pressure to try braindumps ... dont ... See http://blogs.oracle.com/certification/2009/05/the_route_you_choose.html and {thread:id=1064222}
Your most cost effect route is probably via the Oracle Books ..... it may be worth delaying the exam slightly until you are confident. IMHO you would not have sufficient time to absorb maximum benefits from practice exams at the point unless you sail through the perfectly.

Similar Messages

How do I order vouchers for Certification Exams for Final Cut Pro?

how do I order vouchers for Certification Exams for Final Cut Pro? This is for an Educational Institution.
Thanks,
Rufus Chaney

I am at the district office of a school district. One of our high schools is an Apple Authorized Training Center with a Certified Instructor. The instructor is asking for vouchers for his students in order to complete he exams. We would also like to like to make them available to oher schools within the district.

Need clarification for these names, R/3, WAS, NetWeaver

Hi All
I posted the question on WAS preview installation, then I realized I should have put it here. Here is the link to that post:
Need clarification for these names, R/3, WAS, NetWeaver
Thanks again for any input
Xueqing
Added the link to the first post
Message was edited by: xueqing Han

Hi Xueqing,
First of all, sorry for any confusion that we have caused you. I hope I can give you an answer that will clear up the confusion. Sorry, but it is a long explanation of the development of two application solution but history tends to be very long winded!
It is not true SAP R/3 Enterprise equals SAP Web AS, and I'll hopefully explain why:
In the beginning (at least in the client server world) SAP only ship SAP R/3. The technology layer under SAP R/3 was called SAP Basis. There was only SAP Basis under SAP R/3.
SAP then started to deliver other software solutions that were not included in or built on the SAP R/3 software. These included SAP Business Information Warehouse, SAP APO, SAP SEM, SAP CRM, and the list goes on.
These solutions needed to run on technology layer (like SAP R/3 did). SAP Basis was the obvious choice for this because of the common technology layer providing DB/OS abstraction and a coding environment.
~2001:
Later there came the need to have SAP Basis support the web and its web standards and other programming languages. This radically changed what SAP Basis was and we decided to rename the new technology layer to SAP Web Application Server (SAP Web AS). So the SAP Basis name was retired and SAP Basis 4.6D was the last release called SAP Basis.
The new release and the "technology change" means that all the applications mentioned above now ran on SAP Web AS. The first release of SAP Web AS was 6.10.
~2002:
SAP Web AS was first used in SAP R/3 Enterprise release .
The important fact is that SAP R/3 Enterprise runs on SAP Web AS. SAP R/3 Enterprise = SAP R/3 business applications + new business functions + SAP Web AS.
~2003:
I hope the above explanation is clear, because technology takes another major change. It was realized that SAP now had a collection of business solutions/applications (SAP R/3, mySAP CRM, mySAP SCM, etc) and a collection of technology solutions (SAP Web AS, SAP BW, SAP EP, etc). The technology requirements for the business solutions did not end at SAP Web AS, they needed portal, data warehouse, knowledge management capabilities, etc to develop business solutions on.
To address this SAP made the decision to combine all the technology solutions and tools into one single platform. This made complete sense for developers (SAP, Partners and customers). This single platform is called SAP NetWeaver. It includes all the old individual components of SAP Web AS, SAP BW, SAP KM, SAP EP, etc).
~2004:
I think you can guess what the next step is. Yes, the new release of SAP R/3. Since the release of SAP R/3 Enterprise and the release of SAP NetWeaver, SAP R/3's name changes. It is now called mySAP ERP as it includes a lot of applications that were previously sold separately (like SAP SEM, MSS, ESS, etc).
So now mySAP ERP runs on SAP NetWeaver (yes everything that was in SAP Basis and then in SAP Web AS is still there but SAP NetWeaver has so much more now).
Also with the release of SAP NetWeaver, SAP starts to stop using the old technology component names - you will not hear us talk about SAP Web AS, SAP BW, etc anymore, just SAP NetWeaver releases.
In addition all the other SAP business applications also run on SAP NetWeaver, so the latest version of mySAP CRM, mySAP SRM, and mySAP SCM all run on SAP NetWeaver.
So to simplify the explanation, it would be :
Evolution of SAP R/3:
SAP R/3 (up to release 4.6c) -> SAP R/3 Enterprise (releases 1.00 through 2.00 -> mySAP ERP (2004 onward)
Evolution of Basis:
SAP Basis (up to release 4.6d) -> SAP Web AS (up to release 6.40 which was included in SAP NetWeaver '04) -> SAP NetWeaver (2004 onward)
SAP NetWeaver and mySAP ERP have their own release cycles. mySAP ERP always has an underlying technology release that it is built on (this is a SAP NetWeaver release)
I hope this helps,
Mike.

For Certification Exam

I was not able to understand the following things that were there in the course for the Certification Exam for Java 1.4
1. State the benefits of encapsulation in object oriented design and write code that implements tightly
encapsulated classes and the relationships "is a" and "has a".
2. Distinguish between correct and incorrect implementations of hashcode methods.
3.Write code that explicitly makes objects eligible for garbage collection.
Plz reply anyone with detailed explanation of all of these to help me out. Reply asap.

I was not able to understand the following things
that were there in the course for the Certification
Exam for Java 1.4
sigh
1. State the benefits of encapsulation in object
oriented design and write code that implements
tightly
encapsulated classes
All-private attributes, no getters, no setters.
and the relationships "is a" andInheritance
"has a".Association (attribute)
2. Distinguish between correct and incorrect
implementations of hashcode methods.Read the API. Equal objects have to return equal hashcodes.
3.Write code that explicitly makes objects eligible
for garbage collection.
Answered in the other thread.
Plz reply anyone with detailed explanation of all of
these to help me out. Reply asap.Help you out with what? I'd say you're lacking too much experience to even think about taking the SCJP and understanding the stuff that's asked (as opposed to "learn everything by heart and fail during your next job interview, SCJP or not).

Need clarification for MRP Run

Dear SAP Guru,
Need the clarification for MRP Run:
1.At the time of MRP Run what is the status function for - shipping notification?
2.First i have run the mrp planning mode is normal after that i have some changes in material master , so planning mode is - RE Explode planning & Bom ? AT THE TIME OF MRP RUN it is correct
3.In background MRP Run at MDBT - what is the PLANNING MODE ?
4. How will work on automatic PO Create through MRP Run PR\S.?
Kindly give me the feedback , i am waiting for your reply.
Thanks,
Uma

Hello Uma
1 - A shipping notification is a confirmation from the vendor that the material has been shipped.
2 - When you change your BOM or material master MRP settings, system automatically set a flag on the planning file to re-explode the BOM. Therefore, MRP automatically re-explode the BOM, even with planning mode 1. Planning mode 2 is only necessary when you need to force a new BOM explosion and I don't recommend you to use it frequently, as it may lead to performance issues. See my document MRP: Why shouldn’t I use planning mode 3 on a productive system? for more details.
3 - See notes 206666 MRP: Control parameters during planning and 135788 - Planning mode in material requirements planning.
4 - MRP does not create or change purchase orders or production orders. MRP can only create planned orders, purchase requisitions or schedule lines.
At last, I wrote the following document with links to the MRP FAQ notes, which may be helpful to you:
MRP: Frequently Asked Questions
BR
Caetano

Need Clarification for the Attribute Property (Calculated)

hi
I am new to Web Dynpro and i am in need of clarification regarding the Attribute
Property - Calculated
Thanks in Advance
Regards
S.Chandran

Hi,
Calculated Property in webdynpro is required when you want to handle node context attribute programmatically.
When you say Context Attribute as True, it generates two methods, Setter and Getter Method for that attribute.
In getter method you will be getting one element it is the context node, where you created attribute. These methods will be called automatically.
For more Info check this link
Related to calculated property
Hope that helps

Need clarification for cold backup and recovery

Hello Everyone ..
I have much confusion on cold backup and recovery topic.
Already i posted a scanario regarding this and i want to know some clarity points to understand.
1. I had cold backup two days before
2. I am creating an object *(EMP)* and inserting some records then issue log switch continiously.
3. Manually i removed all physical files (datafiles , control files , log files , redolog files ...)
4. then i issued STARTUP FORCE MOUNT;
5. here i am getting error identifying control file.
6. cold backup two days before all files restored
6. then i issue recover database using backup controlfile until cancel;
7. i am trying to issue select * from emp; i am getting error
select * from emp
*ERROR at line 1:
ORA-00942: table or view does not existMy QUESTION IS
After cold backup finished , i created emp table ..
when restoring old back " There is no emp table"
*- then , can i recover emp table ? - If so , please explain about this ..*
Note : REF - LINK https://forums.oracle.com/forums/message.jspa?messageID=11056341#11056341
- Above link says what i did ? . In this thread i am asking concept & logic ..
please do NOT consider as "*DUPLICATE*"

When you recover the database using backup controlfile until cancel, you have to apply archived logs. Did you apply all of them?
If the create command was in the online redo, not yet archived, and you lost the online redo, then you won't have it. This is why you want to have redo multiplexed, it is a critical piece.
In some recovery scenarios, if you haven't lost the online redo, you need to specify those files as if they were archives.
It is normally easier to just be sure you have the latest controlfiles and let Oracle figure it out automatically (which is why you want to use online RMAN backups rather than cold backups). But yes, it is important to understand what is going on for different scenarios. I used to have manual standbys, and one of the disaster instruction sets explained to try to get online redo over to the standby to lose as few transactions as possible. That could still be useful for some snapshot hardware type scenarios, assuming the business is too cheap to do proper failovers.

Need steps for Installing Oracle 11g R2 Grid Infrastrucure in Suse Linix 10

Hi,
I have system with Suse Linux 10 (64-bit), in that i need to install the Oracle 11 R2 Grid Infrastructure for
1. Grid Computing
2. ASM Cluster.
Can any one please provide the Step by step installation to me.
Thanks With Regards
Baalaji V

Ideally, you need two nodes to install a RAC. If you have only one system and trying for practice, you can do it with Virutal machines(VM) or create it as single instance.
You can refer Oracle documentation on Grid install and postings in the internet about Grid install in using VM.
Ashok

Need clarification for Quarter....( Can Q1 start from DECEMBER )

Friends..
I need a clarification regarding the QUARTER 1...
instead of JAN,FEB,MAR can a Quarter 1 (Q1) start from DEC,JAN,FEB ...
Q2 --MAR,APR,MAY ..etc....
Is there any possible ways to do this ..
Thanks in Advance
BASKAR

Hi Baskar,
Yes, its feasible.
However you need to map your 0CALMONTH to your 0CALQUARTER, then write this routine.
DATA : MY_VARSPMON(6),MY_VARYEAR(4),MY_VARMON(2),MY_VARQUARTER TYPE /BI0/OICALQUARTER.
    MY_VARSPMON = SOURCE_FIELDS-SPMON.
    MY_VARYEAR = MY_VARSPMON+0(4).
    MY_VARMON = MY_VARSPMON+4(2).
    CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT = MY_VARMON
      IMPORTING
        OUTPUT = MY_VARMON.
    IF MY_VARMON = '01' OR MY_VARMON = '02' OR MY_VARMON = '03'. MY_VARYEAR = MY_VARYEAR - 1.
      CONCATENATE MY_VARYEAR '2' INTO MY_VARQUARTER.
    ELSEIF MY_VARMON = '04' OR MY_VARMON = '05' OR MY_VARMON = '06'.
      CONCATENATE MY_VARYEAR '3' INTO MY_VARQUARTER.
    ELSEIF MY_VARMON = '07' OR MY_VARMON = '08' OR MY_VARMON = '09'.
      CONCATENATE MY_VARYEAR '4' INTO MY_VARQUARTER.
    ELSEIF MY_VARMON = '10' OR MY_VARMON = '11' OR MY_VARMON = '12'.
      CONCATENATE MY_VARYEAR '1' INTO MY_VARQUARTER.
    ENDIF.
    RESULT = MY_VARQUARTER.
I don't guess there's any changes in particular; but you may considerably change as per requirements in the ABAP logic.
Thanks,
Arun Bala
Edited by: Arun Bala G on Jul 16, 2010 7:11 AM

Need clarification for Captivate assessment settings

Greetings,
I have questions about how an LMS handles unique identifiers
that are assigned to questions or interactions in a 3rd party
software such as Flash or Captivate.
First of all, I must say that the more I work with our LMS
(Integrity eLearning’s WBT) the more I like it. It appears to
so feature rich that I have to ask questions such as the ones
below. I would certainly recommend this product. But I am not the
LMS admin, so these questions are necessary.
My intent is to make an LMS Report (such as the Question
Response Summary Report) more readable, and therefore better
understood. To do this I need to understand naming limitations when
a Captivate generated SCO is integrated with our LMS.
For example: (for those experienced with Captivate)
In Captivate:
I have an assessment based on how a user interacts with a
series of slides. The slides emulate the use of a piece of
software. There are transparent click boxes on specific slides.
On specific slides, for a specific click box:
In Click Box Properties, Reporting tab, I have 5 variables
available. 3 fields and 2 check boxes. I understand the uses of the
2 check boxes (Include In Quiz and Report Answers) and the
Weighting field. My questions relate to 2 fields:
Objective ID:
Interaction ID:
The Objective ID:
I believe this variable needs to be a consistent identifier,
the label is the same for each different interaction within the one
assessment (SCO). So, if I have 5 slides, each with one click box,
this property for each of the 5 click boxes is the same.
Does this relate to a separate Objective dictated by the LMS
or is this related strictly to the that SCO?
Can I use the same identifier in a different assessment, for
a different SCO?
In other words, can I re-use this exact label and not have
data problems when I generate reports?
The Interaction ID:
I believe this variable has to have unique identifiers
(within the single lesson) for each question in the assessment
(SCO). So, if I have 5 slides, each with one click box, this
property for each of the 5 click boxes is different and unique
within the SCO.
Is this correct?
If correct:
Can I use the same identifier in a different assessment, for
a different SCO?
Can the value have spaces or will spaces cause problems?
Can I re-use the labels in different SCOs?
If I have no particular Objective, but I do have Interactions
I want to track, do I have to have a value for the Objective ID
field?
If not, is it good practice to have one anyway? Does it
matter?
When I put in identifiers in these fields, and if I can
re-use the identifiers in different SCOs, can I have spaces,
special characters, etc. or would this cause problems when data is
retrived from the back-end database?
Thank you,
TPK

TPK,
Objective ID fields are supposed to be based on Objectives
set in
conjunction with an LMS. You can tie various questions to an
"Objective"
and then confirm the learner has met their objectives (or
determine where
they need help). Captivate doesn't support much beyond
sending Objective
IDs in interaction data (e.g. doesn't send objective's score,
etc).
Interaction IDs are supposed to be unique across all content
in an LMS.
That typically isn't realistic and I don't know any LMS that
requires or
expects them to be unique. For your reports, the Interaction
IDs should be
unique in a single Captivate file. If you want to track
interactions, but
don't care about objective's - you can leave it blank or put
in a "0". It
won't cause problems in your reporting with WBT Manager (e.g.
a recommended
LMS).
Hope that helps
Regards,
Andrew

Needed clarification for Synonyms

Hi experts,
I have some private synonyms created under user A and the same synonyms exist as a PUBLIC owner.
Now some packages and procedures which are referring to these private synonyms(of A) are under running state. (Procedures are executing).
I want to drop those private synonyms as they are as a PUBLIC also.If i drop these private synonyms will it affect the procedure execution.
Will it allow me to proceed to drop those ....?
Do i need to recompile the object codes once again after dropping?

Hi,
You can drop Private Synonyms as long as there are public Synonyms. No need to recompile. As this will have impact only at the run time.
Regards
RK

Need clarification for firmware & MPIO version for Oracle RAC

Dear All,
We have two-node Oracle RAC configuration 10gR2, Windos 2033 R2, 64-Bit OS using ASM and Oracle 11gR1 clusterware on HP Blades. The SAN storage is from IBM. We want to upgrade the firmware and MPIO version as per vendor recommendation.
Is there any requirement for Oracle RAC to have specific version of firmware and MPIO? Is there any matrix available for this? Or is it like both nodes should be able to see same SAN storage (LUN) irrespective of version used?
Thanks

Please note that Oracle RAC doesnt have requirement any sepcific firm ware. If you upgrade the firmware, it should not break any existing config, so pls check with IBM.
Also if you are doing any specific firmware upgrade then IBM should provide the supported version list.
Hope this help,
Regards
Satishbabu Gunukula
http://www.oracleracexpert.com

Need details for SAP USER-ID

Dear All,
I am Chartered Accountant and having 2 years of domain experience. I have completed my training from a small institute that is not SAP partner. I have very good hold on SAP FI and CO modules and want to appear for SAP FI certification. I DID SELF STUDY AND I AM TOO MUCH CONFIDENT ON THE SUBJECT.
But for appearing any SAP certification I need SAP USER-ID. I DON"T KNOW HOW CAN I GET IT IF I AM INDIVIDUAL CONSULTANT??
Exam Registration & Scheduling Information
Registration for SAP certification exams taken at Pearson VUE is a simple 3-step process:
1. See information below for details on obtaining your SAP User-ID.
2. Create your Pearson VUE web account (SAP user id from step 1 will be required)
3. Register for the exam
All exams require the use of the SAP user id for proper tracking in the SAP Certification System.
CUSTOMERS / PARTNERS / INDEPENDENT CONSULTANTS:
If you have previously taken an SAP exam or attended SAP training, go directly to step b, otherwise, customers and partners should access visit the Service Marketplace to register for your S-user number. Independent consultants, as well as Customers and partners having questions or problems regarding this step, should use the following contacts:
1. North America: Tel: +1 888 777 1727.
2. For all APJ countries excluding Japan: education.apa at sap.com or tel: +65 62 708188
3. For Japan: training.japan at sap.com or tel: +81 3 3273 7070 (9:00-17:00 in Japan local time)
4. For all other countries please navigate to the appropriate country on sap.com/services/education and contact your local Education Department.
CALLING ANY OF ABOVE NUMBER DOESN;T HELP. THEY DON;T REPLY OR CALL WAITING AND ALWAYS WAITING. I HAVE ALREADY SPENT AROUND FEW THOUSAND ON MAKING CALLS ON THESE NUMBERS.
COULD ANYONE OF YOU EXPERTS HELP ME IN APPERING FOR SAP FI and CO CERTIFICATION? I HOPE THERE WILL BE A WAY TO APPEAR FOR CERTIFICATION EXAM WITHOUT USING SAP ID or ANY TRAINING CENTER WHO PROVIDED CERTIFICATION FACILITY WITHOUT ATTENDING THE TRAINING.
AWAITING EXPERTS FEEBACK ON THIS ISSUE.
Thanks,
Manu Rathore
Moderator message: please do not use all upper case in the future.
Edited by: Thomas Zloch on Nov 29, 2010 11:09 AM

Hi
Elgibility for Certification:
You should either complete your training in any Authorized Training Center or Should have experience of more than 2 years(not sure if it is 2 or 3 now) in the said module.
If you dont have any of the above, then certification wont happen in India.
Vishwa.

Sample Questions of SAP MI Certification Exam

Hi Friends,
I am appearing for the SAP Certification Exam in MI.
I am not sure what kind of questions SAP is going to ask in the exam, because inspite of searching at so many places (SAP sites), I have not got even a single question to have an idea.
I think somebody of you must have appeared for certification exam or have some source for getting sample questions,
Please revert with some useful information....
Thanks,
Deepak

Hi Deepak,
I did not attend any MI certifications but can suggest you a few.
As people working on MI are very few,we need to wait and see untill the TechEd completes.
Any how from my exp working on MI for 1 year, i can suggest few things from MIddleware and backend.
1)Types of syncbo's(TO1,SO1,UO1,T51)(importance of these),unit testing syncbos(emulator),how we assign/unassign applications on our MI client using NWA,types of bapis,how we upload application to nwa.
2) Client side...wat are the general APIs we need to use(Ex:to getlist of records, modify record from client, to sync etc we use specific APIs)(Need to know what all APIs to use.
3) How to generate mobile ID using Merep_pd
4) MI supports on what platforms.
5) All MI features like (Replication,cascade download, cascade delete,filtering,multilanguage feature etc)
6)Smartsync tools as wella s generic sync related Questions
May be end to end work flow of MI will work(Create record from client and sync, check in worklist monitor and in Middleware and backend)
These are all very specific and basics of MI.
I heard SAP certifications are not going to be very easy.
So all the best for certification.
Hope this basic info helps you.
Thanks,
Karthick

Enquiry in certification exam

Hi,
    I am going to write certification exam( C_ABAP_7).
    For certification exam, will they ask questions from Netweaver 7.0.
    What type of questions they will ask??
   Can any one plz help.
regards,
pooja

Hi
see this reagrding certification
certification ..
/message/213564#213564 [original link is broken]
/message/514469#514469 [original link is broken]
/message/1315746#1315746 [original link is broken]
/message/1736299#1736299 [original link is broken]
/message/1736299#1736299 [original link is broken]
/message/257122#257122 [original link is broken]
/message/130164#130164 [original link is broken]
This is link from SAP about ABAP certification
http://www50.sap.com/useducation/certification/curriculum.asp?rid=351
http://www.sapteched.com/india/confactivities/certexam.htm
http://www50.sap.com/useducation/certification/curriculum.asp?rid=351
There is a pdf called ABAP certification.
http://www.esnips.com/web/SAP-ABAP?
You can try www.sapdoamin.com
They provide Certification simulation questions which are very useful and a must try site.
Have a look at below link for mySAP Technology - ABAP Workbench
https://websmp206.sap-ag.de/~sapidp/011000358700000746472003E
Have a look at below link for SAP NetWeaver - ABAP Workbench
http://www30.sap.com/hk/services/education/pdf/cert/ABAPWB.pdf
The certification test consists of questions from the areas specified below:
Topic Areas
1. mySAP.com Technologies
- mySAP.com
- Navigation (system handling)
- Technical setup of an SAP system
- System-wide concepts
2. ABAP Workbench Basics (++)
- Data types and data objects
- Internal tables
- Data retrieval (authorization check)
- Subroutines
- The ABAP Runtime System
- Function groups and function modules
- Program calls and data transfer
3. ABAP Objects (++)
- Classes and objects
- Inheritance
- Casting
- Interfaces
- Events
- Global classes and interfaces
- Exception handling
- Dynamic programming
4. ABAP Dictionary (++)
- Database tables
- Performance for table access
- Consistency through input check (foreigh key dependency)
- Dependency of ABAP Dictionary objects
- Views
- Search help
5. Techniqes for List Generation (++)
- Data output to lists
- Selection screen
- Logical database
- Program-specific data retrieval
- Data formatting and control level processing
- Storage of lists and background processing
- Interactive lists
6. Dialog Programming (++)
- Screen (basics)
- User interface (GUI title, GUI status)
- Screen elements for output (text fields, status icons, and group boxes)
- Screen elements for input/output
- Subscreen and tabstrip control
- Table control
- Context menu
- Dialog programming lists
7. Database Changes
- Database updates with Open SQL
- LUWs and Client/Server Architecture
- SAP locking concept
- Organizing database changes
- Complex LUW processing
- Number assignment
- Change-document creation
8. Enhancements and Modifications
- Changes in SAP Standards
- Personalization
- Enhancements to Dictionary elements
- Enhancements using customer exits
- Business Transaction Events
- Business Add-Ins
- Modifications
Weighting Key in the Test:
+ = 1 - 10%
++ = 11 - 20%
+++ = over 20%
Regards
Anji

Needs Clarification for Certification exam 11g OCP

Similar Messages

Maybe you are looking for