Needs help on converting arabic word to english

Hello every body,
we have a requirement like ..some part of the strings in arabic we need to convert into english.Could u plz help me how to do.../if anybody have an example related to this requirement ..plz post a link.
Thanks ,
Anil.

So, I wanted to add an addendum to this, after importing the file into Pages 09', I noticed I no longer had the ability to use the Section and Page break inserts. This is odd, and I believe I found out why. In Pages 5, that system of Sections and inserting blank pages works differently, with different templates. Once back into Pages 09', you simply have to create a blank page, and then use the "Capture page" option to make this your new Section insert/blank page insert, and then you have your formatting options restored.
I'm currently fighting to get Table of Contents to format properly, as that function seems to have been banjaxed after the Pages 5 export into 09', so once I find a work around or a solution, I'll post that as well. Everything else seems to function as it had before, from slapping shapes in, to text boxes, tables, and page numbering. The Table of Contents works, but there isn't a label saying "Table of Contents" bolded, and the spacing and such for the listings aren't really... nice looking like they are normally.
So, like I said, once I find out how, I'll post an update.

Similar Messages

Convert arabic word document to pdf using Inbound Refinery

convert arabic word document to pdf using Inbound Refinery creating problem. After pdf convert the converted pdf changes to left to right instead of right to left.

In that case you will need to look at the Adobe LiveCycle ES PDF Generator product, as it is licensed and suitable for server-based conversion. Adobe Acrobat can not legally be used in the environment that you describe.

I need help in converting a pdf to a fillable form in my adobe

I need help in converting a pdf to a fillable form in my adobe

"Adobe" is a company. If you mean "Adobe Reader" then you can't (at least not easily). You need Adobe Acrobat for that.

Need help in converting numbers to Italian text

Need help in converting numbers to text in Italian language. I want to knw is there any method other than SE63 to translate these text in one shot. I have tried with LSMW also (as the sheet is in XLS format ).Plz reply if anyone is aware of this ..

hi,
chk this code.
CALL FUNCTION 'SPELL_AMOUNT'
EXPORTING
amount = amount
currency = 'EUR'
filler = ' '
language = 'E' => give the language as italian
IMPORTING
in_words = amountrs.
rgds
anver
pls mark all hlpful answers

Need help in converting date format

Hi,
Need help in converting date format from 'DD-MON-YYYY' to 'YYYY-MM-DD' in an .rtf template as I believe xml publisher supports the date format as 'YYYY-MM-DD' only.
Thanks,
Raj.

I got the same problem, anyone know how to solve this problem? I allready found some date functions on http://blogs.oracle.com/xmlpublisher/2008/09/date_functions.html . I also tried <?xdoxslt:month_name(xdoxslt:get_month(xdofx:substr(NEED_BY_DATE, 4,3)), $_XDOLOCALE), 0, 'nl-NL')?>, but then it returns a namespace error (Caused by: oracle.xdo.parser.v2.XPathException: Namespace prefix 'xdofx' used but not declared.). Anyone know how to fix this?
Edited by: user11165753 on 7-dec-2009 23:50

Hey ammm who can help me y need help but i don´t speak english very well, hey ammm who can help me y need help but i don´t speak english very well

hey ammm who can help me y need help but i don´t speak english very well, hey ammm who can help me y need help but i don´t speak english very well

Post your question in your native language. There are often Spanish speakers who participate in these forums.
Regards.

I need help on my microsoft word

hi i need help on my microsoft word and everytime i need to copy something like my homework it comes out cut. please help me

Well, Google "easy bib pro" (no quotes) and follow the instructions, and type in the appropriate authors and titles.
James

Need help to convert SQL MSSQL statement to work with PL in ORACLE

Hi All,
I have the trigger below and it worked on MSSQL server for windown and
I really need your help to convert this trigger to work on PL/ORACLE:
create trigger deleteLD
     on tablea for delete
as
set nocount on
begin
     declare @tablename varchar(100)
     declare @dropSql varchar(50)
     select @tablename= dataset from deleted
     set @tablename = 'LD_' + @tablename
     set @tablename = @tablename + 'UTMSTATS'
     if exists (select * from sysobjects where name = @tablename)
     begin
          set @tablename = 'drop table ' + @tablename
          EXEC (@tablename)
     end
end
GO
Your help is greatly appreciated.
Thanks,
JP

not sure if this is something that you want:
Create Or Replace Trigger deleteLD
Before Delete on tablea
Declare
vCtr          number := 0;
Begin
select count(*)
   into vCtr
   from all_tables
where table_name = :new.tablename;
if vCtr > 0 then
   dbms_utility.exec_ddl_statement('drop table '||:new.table_name);
end if;
End;note: not tested

How convert to word in English words not code

How do I convert a PDF file to Word in English? All I get are codes I can't read.

What means "code"; can you post a screenshot of what you see: https://forums.adobe.com/thread/1070933 - maybe you are not opening the converted document in Word?
If you want to unsubscribe: http://helpx.adobe.com/x-productkb/policy-pricing/cancel-subscription-acrobat-online-servi ces.html
[topic moved to ExportPDF forum]

I need help to convert hours,minutes and seconds to seconds.

Hi, I need help with the code on how to convert the hours,minutes and seconds to seconds. I don't know which formula to use so that I can get the results in total number of seconds. Thanks.

Jos ("when in doubt: parenthesize correctly")Bracist.You're more right than you'd known: last week I climbed over a safety
fence (which I wasn't supposed to do of course) to adjust the position
of an optical measurement device we installed in a huge production
machine in a factory. I stepped on some sort of hose; the end of that
hose broke loose and hit me straight in the middle of my lower jaw. My
front teeth feel wiggly now and my molars on the left of my lower jaw are
not what they used to be. This Wednesday I get that all fixed at some
dental clinic. Keep your fingers crossed because me+dentists == war.
My tongue continuously keeps on reporting craters and disaster ;-)
Jos, how's it going? Besides a possible loss of some teeth, I'm fine ;-)
My Spring/Hibernate journey continues. I'm trying out Hibernate 3.2
annotations and the Ant tools. So far, so good.Good to hear. At the moment I'm putting my teeth (sic) in that darn snmp
stuff which simply refuses to work the way I want it and besides that I'm
heavily involved in some of that SAP stuff. Spring is not in the vicinity for
me in the next couple of months sadly enough.
kind regards,
Jos

Why does Adobe ExportPDF fail to convert to Word in English (UK)?

On 7 October 2014 I purchased and added to my MacBook Air Adobe ExportPDF. The PDF document (in English) has uploaded three times for Conversion to Word in English (UK) but three times "Conversion Failure" is the result. Do I need to cancel my purchase?

Hi,
If it is showing 'conversion failure' error,you can try using different browser.
Please let us know if you require further assistance.
Regards,
Florence

I need help to convert photos in the .swf format to a format that will open on iOS

I need help converting photos in the .swf format to a format that will work on my Mac. Thanks

SWF is a Flash file that should be able to be opened with your web browser on your Mac. Probably not on iOS though.
You will likely need to find the source file for the application that created the SWF and the image will be in that. You could then export/extract the image and have it as a stand alone file.
It does look like there are applications that can do what you are looking for though: https://www.google.com/search?q=SWF+to+JPG

I need help to convert a string to date and time

Good aft,
1.How can i get a date from the user input thro' Frames?
2.How to parse it to the date object(I need to include java.util.Date but for the database i need to include java.sql.*,if i do so, i have error as
found:java.util.Date
Required:java.sql.Date)
3.How to insert into the database
The same i need help to insert time into database?
I need solution and explanation...
Reply me immediately...
If u send me the code, its better to me.

Hello,
The best way is to use the HEX to decimal coversion VI in the string pallette. Then, write this decimal directly to your chart. If you are doing it a point at a time put it into a while loop.
Doug

Need help in converting DAQ to DAQmx

Hi,
I've struggled with coverting traditional DAQ to DAQmx for two weeks. I really need help from someone.
As you can see the picture below, I've tried to replace the old VI's with new ones. But, it doesn't work. Of course, the VI below is just a part of my VI. VI's after case structure are inside of while loop.
Could you please give me thought that why it doesn't work?
FYI: The strange thing about it is that it runs without any error messege, but there is no actual output (values on the graph, data in arrays, etc).
Thanks in advance.
Best,
Jay
Solved!
Go to Solution.
Attachments:
Untitled 1.vi ‏74 KB

Hi Jay,
Assuming that the Traditional DAQ and DAQmx code are screenshots from separate VIs, I believe that the following parameter of the read functions in each driver would account for the different behavior that you are seeing (you have both set to -1):
Traditional DAQ:
DAQmx:
So, when you give DAQmx Read a -1 for "number of samples per channel" when running a Continuous task, the effect is that it will return whatever data is available at the time DAQmx Read is called. In your case this is immediately after the task is started so there very well could be 0 samples available in the buffer. I'd imagine that you would see data if you change the value of this parameter from -1 to the actual number of samples that you want to read.
Having said this, if you want to acquire continuously you should call DAQmx Read from inside a loop. I agree with the others that you should take a look at the DAQmx shipping examples to help get started, you will probably find something very close to what you want to do. You can find the examples at:
Help >> Find Examples... >> Hardware Input and Output >> DAQmx
Thanks for posting, I hope this helps!
-John
John Passiak

Loader (Need help to convert from AS3 to AS2)

Since I know this code works fine and that I use it into one of my AS3 flash, I need it in one of my AS2 flash and I don't know how to adapt it. I've searched in over 100 threads and I can't find something similar... Thanks to help me get it to work in AS2! Since I need it in AS2, I thought it would be the right place to post it.
I posted all the loading process code, but I would need help mostly with the Loader part. How to do it in AS2? Thanks!
var img = 0;
var image_total = 0;
var myImages_array:Array = new Array();
var myBitmaps_array:Array = new Array();
function Init();
// Images urls are loaded into an array before this call
LoadImage();
function LoadImage()
    if (img < myImages_array.length) // img is the current image index and myImages_array is my array of URLs
// I need help with this part please
      var loader:Loader = new Loader();
// returns the image full path and load it
        loader.load(new URLRequest(my_site_url + myImages_array[img]));
        loader.contentLoaderInfo.addEventListener(Event.COMPLETE, imageLoaded);
    else
        if (count == 0)
// When everything's loaded, I'll start loading my Bitmaps into a small slideshow
            count += 1;
            init_slideshow();
function imageLoaded(e:Event):void
    var image:Bitmap = e.target.content;
// Bitmap manipulation here (removed)
    image_total = myBitmaps_array.push(image);
    if (img < myImages_array.length)
        img += 1;
// Call next image
        LoadImage();
function init_slideshow():void
// Reserts the current index for the first one
    img = 0;
// Start the slideshow since everything's loaded
    animate_slideshow();

If you look at the Flash help documentation for the addListener metod of the MovieClipLoader class, there is an erxample there that you should hopefully be able to work from. It will be better if you get your stuff coded into AS2 before you pursue more help with it. IT is difficult to tell you how to fix something if you don't show what you are using.

Needs help on converting arabic word to english

Similar Messages

Maybe you are looking for