Neen help with date range searches for Table Sources
Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 24-MAR-07, 22-SEP-), 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks, in advance….
raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much!
Similar Messages
-
Need help with date range searches for Table Sources in SES
Hi all,
I need help, please. I am trying to satisfy a Level 1 client requirement for the ability to search for records in crawled table sources by a date and/or date range. I have performed the following steps, and did not get accurate results from Advanced searching for date. Please help me understand what I am doing wrong, and/or if there is a way to define a date search attribute without creating a LOV for a date column. (My tables have 500,00 rows.)
I am using SES 10.1.8.3 on Windows 32.
My Oracle 10g Spatial Table is called REPORTS and this table has the following columns:
TRACKNUM Varchar2
TITLE Varchar2
SUMMARY CLOB
SYMBOLCODE Varchar2
Timestamp Date
OBSDATE Date
GEOM SDO_GEOMETRY
I set up the REPORTS table source in SES, using TRACKNUM as the Primary Key (unique and not null), and SUMMARY as the CONTENT Column. In the Table Column Mappings I defined TITLE as String and TITLE.
Under Global Settings > Search Attributes I defined a new Search Attribute (type Date) called DATE OCCURRED (DD-MON-YY).
Went back to REPORTS source previously defined and added a new Table Column Mapping - mapping OBSDATE to the newly defined DATE OCCURRED (DD-MON-YY) search attribute.
I then modified the Schedule for the REPORTS source Crawler Policy to “Process All Documents”.
Schedule crawls and indexes entire REPORTS table.
In SES Advanced Search page, I enter my search keyword, select Specific Source Group as REPORTS, select All Match, and used the pick list to select the DATE OCCURRED (DD-MON-YY) Attribute Name, operator of Greater than equal, and entered the Value 01-JAN-07. Then the second attribute name of DATE_OCCURRED (DD-MON-YY), less than equals, 10-JAN-07.
Search results gave me 38,000 documents, and the first 25 I looked at had dates NOT within the 01-JAN-07 / 10-JAN-07 range. (e.g. OBSDATE= 10-MAR-07, 22-SEP-07, 02-FEB-08, etc.)
And, none of the results I opened had ANY dates within the SUMMARY CLOB…in case that’s what was being found in the search.
Can someone help me figure out how to allow my client to search for specific dated records in a db table using a single column for the date? This is a major requirement and they are anxiously awaiting my solution.
Thanks very much, in advance….raford,
Thanks very much for your reply. However, from what I've read in the SES Admin Document is that (I think) the date format DD/MM/YYYY pertains only to searches on "file system" sources (e.g. Word, Excel, Powerpoint, PDF, etc.). We have 3 file system sources among our 25 total sources. The remaining 22 sources are all TABLE or DATABASE sources. The DBA here has done a great job getting the data standardized using the typical/default Oracle DATE type format in our TABLE sources (DD-MON-YY). Our tables have anywhere from 1500 rows to 2 million rows.
I tested your theory that the dates we are entering are being changed to Strings behind the scenes and on the Advanced Page, searched for results using OBSDATE equals 01/02/2007 in an attempt to find data that I know for certain to be in the mapped OBSDATE table column as 01-FEB-07. My result set contained data that had an OBSDATE of 03-MAR-07 and none containing 01-FEB-07.
Here is the big issue...in order for my client to fulfill his primary mission, one of the top 5 requirements is that he/she be able to find specific table rows that are contain a specific date or range of dates.
thanks very much! -
Hi,
I have an Oracle form which allows users to enter :start_date_active(mandatory) and :end_date_active (can be null).
I need to check in form using SQL if there already exists a record for this date range or if there is any overlapping date ranges for the value entered and disallow user from entering that.
I have my query as follows:
SELECT (1)
FROM <table> xsv
WHERE 1=1
AND ( (:START_DATE_ACTIVE >= xsv.start_date_active) AND
(:START_DATE_ACTIVE <= nvl(xsv.end_date_active,'31-DEC-4712'))
OR
(:END_DATE_ACTIVE >= xsv.start_date_active) AND
(:END_DATE_ACTIVE <= nvl(xsv.end_date_active,'31-DEC-4712'))
But, this incorrectly allows me to enter over lapping date ranges when the :end_date_active is null.
It should work as follows :
eg.
start_date_active end_date_active
01-Apr-2009 allowed
01-Mar-2009 10-Mar-2009 allowed
01-feb-2009 Not allowed, as it overlaps with 1st record
10-feb-2009 05-Mar-2009 Not allowed, as it overlaps with 2nd record
05-Mar-2009 20-mar-2009 Not allowed, as it overlaps with 2nd record
and so on.
How do I modify my query to deal with null end dates ?
Many Thanks
ShankarHi, Shankar,
Whenever you have a question, it helps to post:
(1) The version of Oracle (and any other relevant software) you're using
(2) A little sample data (just enough to show what the problem is) from all the relevant tables
(3) The results you want from that data (You posted this. It would be better if it were formatted.)
(4) Your best attempt so far (formatted) (You posted this, but since it's unformated, it's very hard to read.)
(5) The full error message (if any), including line number
Executable SQL statements (like "CREATE TABLE AS ..." or "INSERT ..." statements) are best for (2).
Formatted tabular output is okay for (3). Type these 6 characters
{code}
(small letters only, inside curly brackets) before and after formatted text, to preserve spacing.
Use different names for the parameters and the columns. For example, if the column is called start_date_active, call the corresponding parameter :p_start_date_active. It will help to keep them straight.
In this statement, if the column end_date_active IS NULL, you're treating it as an impossibly late date:
(:END_DATE_ACTIVE <= nvl(xsv.end_date_active,'31-DEC-4712'))That's good. (You should really use TO_DATE ('31-DEC-4712', 'DD-MON-YYYY'), though.)
If it's possible for the parameter :end_date_active to be NULL, you should use NVL in the same way, to equate it with some appropriate date.
The correct way to see if the range a to b (a <= b) overlaps with x to y (x <= y) is:
WHERE b >= x
AND a <= yIf you want an expression that's TRUE when they do not overlap, then say
WHERE NOT ( b >= x
AND a <= y
)or, equivalently,
WHERE b < x
OR a > y -
Hi, I am doing a search on a table using a date column having index defined on it.
when I am using below query:[Here 26-OCT-2010 is the current date.]
SELECT *
FROM cs_incidents_all_b
WHERE incident_date BETWEEN TO_DATE ('25-OCT-2010 00:00:00',
'DD-MON-RRRR HH24:MI:SS'
AND TO_DATE ('26-OCT-2010 23:59:59',
'DD-MON-RRRR HH24:MI:SS'
Explain plan statistics is - Cost : 4, Bytes: 559, Cardinality:1
If I run the same query by changing the dates and with 1 day duration, the cost is increasing significantly:
SELECT *
FROM cs_incidents_all_b
WHERE incident_date BETWEEN TO_DATE ('01-OCT-2010 00:00:00',
'DD-MON-RRRR HH24:MI:SS'
AND TO_DATE ('02-OCT-2010 23:59:59',
'DD-MON-RRRR HH24:MI:SS'
Explain plan statistics is - Cost : 3,643, Bytes: 2,217,553, Cardinality:3,967
And if I increase the date range, the cost is becoming too high.
If anybody faced this proble previously, kindly help me to resolve.
Thanks in advance,
Sam.Tuning request
Take a look at the
When your query takes too long ...
HOW TO: Post a SQL statement tuning request - template posting -
Pdf form for data from another form with data, xml or pdf, tables not expanding
Sir,
I am using Adobe Acrobat 9 Pro and LifeCylce to do these forms. I have made several subforms for a Risk Assessment for the mission they fly. I have also made up another form with tables that would connect with each subform data. This form also will give me and others a % of the values received from the data to help us with seeing problem area towards Safety.
I am able to connect the data to the form from the Risk Forms but when I go and add another group of data it over writes the data that was already in the data collection form. The tables are dynamic and able to expand with the generated data but when I compile several Risk Forms, xml. data into one single data group, the receiving tables will not except this data. To compile the data I am in Acrobat and using the form-manage form data-merge data to spreadsheet than enter as a report that is xml. Still not working. I also tried to save the form, with data already in the tables, and then opened it again and add data to it, it will over write the existing data in the form. This form does work great with the generated data in LiveCycle.
Any suggestions???Thanks Paul
Did as you said and for each subform binding tab made sure I have "Repeat subform for each data item" checkbox and still no change when I add the data.
I even tried to combine the xml data and that file just has the main page and not the data pages. just another problem that is happening.
Any other suggestions on this expanding tables and receive single forms one at a time.
Bill -
To search for tables with fields
hey hi!!
can anybody tell me the name of tables frm dose i can find fields for values of goods rteceived and issued in particular time period and also number of units of goods in that period.
regards,vague...your requirement
try to search for tables by fields with se16 and table DD03L
A. -
Check a number range with date range.
i have table test which is having column
Start Range
End Range
Start Date
End date
how can i check start range and end range does not exists b/w existing record also with date range of this record.
end date can be blank also.990690 wrote:
i have table test which is having column
Start Range
End Range
Start Date
End date
how can i check start range and end range does not exists b/w existing record also with date range of this record.
end date can be blank also.Your question makes absolutely no sense whatsoever. We could make guesses, but then we may be wrong in our guesses.
Please provide sufficient details for people to be able to help you. Read the FAQ: {message:id=9360002} -
Filling dynamic internal table with data from other internal table
Hi Friends,
My problem is that i have already built a dynamic internal table
(class int_table->create) but now i want to fill it with data from other internal table.
The dynamic table column name and the field value of the data filled internal table are same, but how to access that column name, since i cant hard code it anyway.
Like if my werks field value is '8001'. I want to place it under the column 8001 of dynamic table, Can anybody help me in this regard?
Awarding points is not a problem for even giving a slight hint.
Best RegardsHi
See this
Dynamic internal table is internal table that we create on the fly with flexible column numbers.
For sample code, please look at this code tutorial. Hopefully it can help you
Check this link:
http://www.****************/Tutorials/ABAP/DynamicInternaltable/DynamicInternalTable.htm
Sample code:
DATA: l_cnt(2) TYPE n,
l_cnt1(3) TYPE n,
l_nam(12),
l_con(18) TYPE c,
l_con1(18) TYPE c,
lf_mat TYPE matnr.
SORT it_bom_expl BY bom_comp bom_mat level.
CLEAR: l_cnt1, <fs_dyn_wa>.
Looping the component internal table
LOOP AT it_bom_expl INTO gf_it_bom_expl.
CLEAR: l_cnt1.
AT NEW bom_comp.
CLEAR: l_cnt, <fs_dyn_wa>, lf_mat.
For every new bom component the material data is moved to
temp material table which will be used for assigning the levels
checking the count
it_mat_temp[] = it_mat[].
Component data is been assigned to the field symbol which is checked
against the field of dynamic internal table and the value of the
component number is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_comp_list OF STRUCTURE <fs_dyn_wa> TO
<fs_check>.
<fs_check> = gf_it_bom_expl-bom_comp.
ENDAT.
AT NEW bom_mat.
CLEAR l_con.
ENDAT.
lf_mat = gf_it_bom_expl-bom_mat.
Looping the temp internal table and looping the dynamic internal table
*by reading line by line into workarea, the materialxxn is been assigned
to field symbol which will be checked and used.
LOOP AT it_mat_temp.
l_nam = c_mat.
l_cnt1 = l_cnt1 + 1.
CONCATENATE l_nam l_cnt1 INTO l_nam.
LOOP AT <fs_dyn_table2> ASSIGNING <fs_dyn_wa2>.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa2> TO <fs_xy>.
ENDLOOP.
IF <fs_xy> = lf_mat.
CLEAR lf_mat.
l_con1 = l_con.
ENDIF.
Checking whether the material exists for a component and if so it is
been assigned to the field symbol which is checked against the field
of dynamic internal table and the level of the component number
against material is been passed to the dynamic internal table field
value.
IF <fs_xy> = gf_it_bom_expl-bom_mat.
ASSIGN COMPONENT l_nam OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
CLEAR l_con.
MOVE gf_it_bom_expl-level TO l_con.
CONCATENATE c_val_l l_con INTO l_con.
CONDENSE l_con NO-GAPS.
IF l_con1 NE space.
CONCATENATE l_con1 l_con INTO l_con SEPARATED BY c_comma.
CLEAR l_con1.
l_cnt = l_cnt - 1.
ENDIF.
<fs_check> = l_con.
l_cnt = l_cnt + 1.
ENDIF.
ENDLOOP.
AT END OF bom_comp.
At end of every new bom component the count is moved to the field
symbol which is checked against the field of dynamic internal table
and the count is been passed to the dynamic internal table field
value.
ASSIGN COMPONENT c_count OF STRUCTURE <fs_dyn_wa> TO <fs_check>.
<fs_check> = l_cnt.
INSERT <fs_dyn_wa> INTO TABLE <fs_dyn_table>.
ENDAT.
ENDLOOP.
Reward if useful
Anji -
I am printing a calendar and certain events will be helds on certain dates.
One can edit the event if it has not passed the date. Events in the past can be viewed but not edited.
When I query the database the date must be formatted dd-MMM-yy
I am able to get today's date by doing this:
java.util.Date today = new java.util.Date();
String formatString = "dd-MMM-yy";
SimpleDateFormat sdf = new SimpleDateFormat(formatString);
String today_str = sdf.format(today);
My code for printing the calendar: I left out some of the table formatting in the JSP page.
GregorianCalendar d = new GregorianCalendar();
int today = d.get(Calendar.DAY_OF_MONTH);
int month = d.get(Calendar.MONTH);
d.set(Calendar.DAY_OF_MONTH,1);
int weekday = d.get(Calendar.DAY_OF_WEEK);
for(int i = Calendar.SUNDAY; i < weekday; i++)
out.print("<td> </td>");
do {
int day = d.get(Calendar.DAY_OF_MONTH);
out.print("<td>" + day + "</td>");
String formatString = "dd-MMM-yy";
SimpleDateFormat sdf = new SimpleDateFormat(formatString);
//if(event exists on this day
// Get results
// print link for viewing
// if (after today) print link for edit
if(weekday == Calendar.SATURDAY)
out.println("</tr><tr valign=top>");
d.add(Calendar.DAY_OF_MONTH,1);
weekday = d.get(Calendar.DAY_OF_WEEK);
} while(d.get(Calendar.MONTH) == month);
if(weekday != Calendar.SUNDAY)
System.out.println();
The part I need help on is this:
//if(event exists on this day
// Get results
// print link for viewing
// if (after today) print link for edit
I'm looping through each day of the month to print the days. I have the month, day, year as integers. How can I create a date object out of that and compare it to today's date to test if it's before or after today???
All the function in the Date class that I think would do this have been deprecated.Need Help with Dates
Here is some information about dates:
There are many edible palm fruits, and one of the most widespread and favored of these is the data (Phoenix dactylifera). Dates were cultivated in ancient land from Mesopotamia to prehistoric Egypt, possibly as early as 6000 B.C. Then--as now--dates were a staple for the natives of those dry regions. Much later, Arabs spread dates around northern Africa, and dates were introduced into California by the Spaniards in 1765, around Mission San Ignacio.
The date prefers dry, hot climates, because date fruits are injured at temperatures of 20 degrees F, and the damp climate of the California coast was not favorable for fruit production. In the mid-1800s, the date industry developed in California's hot interior valleys and in Arizona. Now the date industry in the United States is localized mostly in the Coachella Valley, where the sandy soils permit the plants to be deeply irrigated. Today the new varieties, mostly introduced in this century, produce about 40 million pounds of dates per annum, or over 60% of the dates consumed in this country. The rest are imported mainly from Persia. According to one survey, about one million people are engaged entirely in date palm cultivation worldwide.
Hope that helps. -
Is there a Java utility class to help with data management in a desktop UI?
Is there a Java utility class to help with data management in a desktop UI?
I am writing a UI to configure a network device that will be connected to the serial port of the computer while it is being configured. There is no web server or database for my application. The UI has a large number of fields (50+) spread across 16 tabs. I will write the UI in Java FX. It should run inside the browser when launched, and issue commands to the network device through the serial port. A UI has several input fields spread across tabs and one single Submit button. If a field is edited, and the submit button clicked, it issues a command and sends the new datum to the device, retrieves current value and any errors. so if input field has bad data, it is indicated for example, the field has a red border.
Is there a standard design pattern or Java utility class to accomplish the frequently encountered, 'generic' parts of this scenario? lazy loading, submitting only what fields changed, displaying what fields have errors etc. (I dont want to reinvent the wheel if it is already there). Otherwise I can write such a class and share it back here if it is useful.
someone recommended JGoodies Bindings for Swing - will this work well and in FX?Many thanks for the reply.
In the servlet create an Arraylist and in th efor
loop put the insances of the csqabean in this
ArrayList. Exit the for loop and then add the
ArrayList as an attribute to the session.I am making the use of Vector and did the same thing as u mentioned.I am using scriplets...
>
In the jsp retrieve the array list from the session
and in a for loop step through the ArrayList
retrieving each CourseSectionQABean and displaying.
You can do this in a scriptlet but should also check
out the jstl tags.I am able to remove this problem.Thanks again for the suggestion.
AS -
Need Help with data type conversion
Hello People,
I am new to java, i need some help with data type conversion:
I have variable(string) storing IP Address
IPAddr="10.10.103.10"
I have to call a library function which passes IP Address and does something and returns me a value.
The problem I have is that external function call in this library excepts IP Address in form of a byte array.
Here is the syntax for the function I am calling through my program
int createDevice (byte[] ipAddress).
now my problem is I don't know how to convert the string IPAddr variable into a byte[] ipAddress to pass it through method.Class InetAddress has a method
byte[] getAddress() You can create an instance using the static method getByName() providing the IP address string as argument. -
Hi,
my requirement is to create a calculated member to calculate Total unique customers who has sales > 0 within the date range.
Below mdx works normally with single date
DistinctCount(FILTER([Customer_Sales].[Outlet ID].[Outlet ID].members,
([Measures].[distribution],
[Date].[CalendarWeek].CurrentMember
)=1))
I'm looking for something like below with date range,
DistinctCount(FILTER([Customer_Sales].[Outlet ID].[Outlet ID].members,
([Measures].[distribution],
WTD([Date].[CalendarWeek].CurrentMember
))=1))
Above MDX fails with the error: String of numeric expression expected, Tuple set expression was used.
Appreciate your immediate response.
Thanks in advanceHi Chandima,
Thanks for the response.
I tried your code, it works but the results are not correct. As per manual calculations, there are 28 unique customers who has positive sales on Week to date (2014-11-03), but result shows only 19.
For the first day of week (2014-11-01), there are 9 unique customers, which is correct. But for the following days it is not giving correct result.
Further, performance of this approach is very poor
Thanks, -
Help with date validation on input boxes.
I need some help with date validation on input boxes.
What I�m trying to create is a form where a user inputs dates and then the rest of the form calculates the other dates for them.
i.e. � A user inputs 2 dates (A & B) and then a 3rd date which is 11 weeks before date B is calculated automatically.
Is this possible and if so how do I do it ???
ThanksHi,
to get third date try this:
java.util.Date bDate = ...;
Calendar yourCalendar = new GregorianCalendar();
yourCalendar.setTime(bDate);
yourCalendar.roll(Calendar.WEEK_OF_YEAR, -11);
java.util.Date cDate = yourCalendar.getTime();Regards
Ldinka -
LookupCube based on CurrentMember of different dimensions along with date range
Hi,
I want to get a value through LookupCube based on CurrentMember of different dimensions along with a date range. For example, I want to make this happen: LookupCube("TMIClaim","([Measures].[Paid Amount],"+"[Transaction
Date].[Hierarchy].[Day].&[2013-01-01T00:00:00]:[Transaction Date].[Hierarchy].[Day].&[2013-02-01T00:00:00]" +"," + "[Product].[Name].&["+[TMI Product].[Name].CurrentMember.Name+"]" +")")).
It does not work as long as I put the date range.
I cannot use Aggregate either since it does not take multiple dimensions as filter criteria. That means when I use date range for aggregate I cannot use another dimensions as filter.
I am looking for any of the solution which based filter that is combined with a date range and other dimensions.
Thanks,
MamunTry using the Sum() function. Something like:
LookupCube("TMIClaim","Sum( ( { "
+"[Transaction Date].[Hierarchy].[Day].&[2013-01-01T00:00:00]:[Transaction Date].[Hierarchy].[Day].&[2013-02-01T00:00:00]
}" +"," + "[Product].[Name].&["+[TMI Product].[Name].CurrentMember.Name+"]"
) , ([Measures].[Paid Amount]," +")
(Check location of parenthesis, but this should point you in the right direction).
This worked for me:
WITH MEMBER MEASURES.LOOKUPCUBEDEMO AS
LOOKUPCUBE("MyCube", "sum({[Date].[YQM].[Day].&[20140330]:[Date].[YQM].[Day].&[20140331]},[Measures].[Row" + " Count])")
SELECT MEASURES.LOOKUPCUBEDEMO ON 0
FROM [MyCube]
Victor Rocca -
Hello, all.
In iTunes 11.0.2.26, an Albums search by track names returns albums as if they only have one track on them, but I still want to access the entire album. How can I have the search results show the entire album (with just the searched for name highlighted)? For instance, I'm wanting to play an album with a particular track on it or I'm searching for albums that include that track. iTunes incorrectly assumes that all I'm after is that one track and then incorrectly displays the album as if there is only one ttrack on it. This is a bonkers default setting. Can I change this?Click the search magnifying glass and uncheck "Search entire library".
Type in the name of the track.
Click the album of interest to show tracks.
Select the track.
Press the X in the search box to clear the search.
Double click the track you want to start playing first.
tt2
Maybe you are looking for
-
I am not technical at all. I just want to know why somedays my system crashes over and over again, and other days all is well. Each time it crashes I get a "crash report" option, and I always send in said report, but I do not think anyone is checking
-
I have tried and tried to install itunes on my mums zoostorm windows 7 64-bit pc and it comes up with this message "this installation package could not be opened, verify that the package exists and that you can access it, or contact the application v
-
Should I use a screen protector for an iPhone 6 Plus?
I just bought an iPhone 6 Plus and can't decide if I want/need a screen protector on it. I take great care of my phones and do not set it carelessly down on any surface.
-
How to Find the Latest Version of Cluster Binary Files available at Microsoft website
How we can find the latest version of Cluster binary files available for download at Microsoft Website and which Cluster Binaries should be update to make the Cluster services stable healthy.
-
Printing more than one report in the viewer
Post Author: gchambers01 CA Forum: General I have 3 form letters I would like to print. Is there a way to print mutiple reports at the same time? I tried using the subreports but they need to run at different times in the report. One subreport is tie