Neer WXP RAID and SSCI driver for my Satellite C650-10K

Does anybody know where I can find the Raid and SSCI driver for my Satellite C650-10K?

Hi buddy,
Are you sure that you need RAID or SCSI (not SSCI) driver for Satellite C650?
As far as I know this model doesnt support such hardware
I think you need drivers for SATA controller. This package is called Intel Storage Manager and can be downloaded on official Toshiba website.
Here is an interesting article about XP installation with SATA drivers:
http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm

Similar Messages

  • Which Build and what drives for a raid? One for Harm Maybe :)

    Hi, I've been waiting to get an evga sr-2 but they are so hard to get a hold of at the moment I was starting to wonder whether I should go for something like this in the meantime. http://www.overclockers.co.uk/showproduct.php?prodid=BU-031-OB
    I always wait longer and do big upgrades instead so am willing to wait another month if necessary to get my hands on an sr-2 but was looking at Harms Beast spec on the premiere pro benchmarks and noticed he gets pretty impressive results from a single i7
    Just wondering if overclocked sr-2 running at 4.2Ghzplus is worth twice the money.
    Also, No matter which board i end up with the first step will be using their onboard raid to run a raid 5 array with 6 discs. (they don't do raid 3)
    Eventually I plan to get an areca card but don't know what drives to use. WD Re4's (2Tb) seem to be pretty good for raid and critical use for at £200 they are a lot more than WD blacks. Just wondering what to do for as it's alot of money especially if I decide to get an areca card and use raid 30?
    Thanks, Michael.

    Michael,
    As you can see, Chris' top rank in the PPBM5 Benchmark reflects the enormous power of dual X5680's. Admitted, it is much more expensive than a similarly overclocked single i7-980X, like Studio North. However there is a distinct advantage of a dual Xeon system, in the sense that you will have 12 DIMM slots and can easily use the very affordable 2 GB sticks to get 24 GB, which saves a lot in comparison to 6 x 4GB sticks on a X58 mobo. Or you can expand memory to 48 GB should you desire so.
    You may have seen this review already, but in case you missed it, look here: http://www.bit-tech.net/hardware/motherboards/2010/08/17/evga-classified-sr-2-review/1
    If you consider that there will be further improvements in multi-threading and in some exporter modules in CS Next, the advantage of more cores and more memory will probably increase over a 980X.
    As for disks, the WD RE4's are a great choice. Depending on your storage requirements, and your timing for an Areca controller, it may make sense to start with the 1 TB version or the 1.5 TB version and then later add another 6 x 1 TB or 6 x 1.5 TB. That will give you a 12 disk array with the same gross capacity as 6 x 2 TB for approximately the same amount, but because of the larger array will give you better performance or in the case of 1.5 TB models even more storage capacity. I would advise against the Caviar Blacks because of the TLER issue.
    Planning ahead for the Areca, you have to keep in mind a way to transfer your data from a mobo array to an Areca array. You may have to first create a new 6 disk array on the Areca, copy your data from the mobo array to the new Areca array, then move one disk at a time from the mobo to the Areca and define it first as a hot-spare and then expand the array. You have to do that for all the existing disks, but that way you have no problems in getting all your data on the new array intact. I probably would use a Raid3 or Raid5 with one hot-spare, so you end up with 11 x Raid3/5 plus one hot-spare, or a 12 x Raid6.
    Hope this helps.

  • HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card

    i want  HP Pavilion g6-1201tx Notebook PC video and audio driver for graphics card (Windows 7) 

    Hi:
    Below is the link to the support and driver page for your notebook.
    http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&dlc=en&docname=c03061225&lc=en&product=5163244&quer...
    Your model uses the AMD graphics driver only. Don't install the Intel one.

  • Have a new Pavilion 23 and want driver for Scanjet

    Have a new Pavilion 23 and want driver for Scanjet G2710. Can anybody help please

    Hi,
    Select your operating system below, then download and install the drivers listed within the Driver - Product Installation Software section. Select the Full Feature to if available, otherwise select the Basic drivers which allow scanning via Paint or Windows Fax and Scan:
    http://h20565.www2.hp.com/portal/site/hpsc/public/psi/swdHome/?lang=en&cc=us&sp4ts.oid=3423845
    For any issues, be sure to clarify what operating system you are using.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Wireless and bluetoutch driver for hp 15r-061no, windows 7 x64.

    Hi, i´m desperate need wireless and bluetoutch driver for hp 15r-061 no,  windows 7 x64.

    Hi:
    That is correct.  The Realtek 8188 wireless card does not have built in bluetooth.
    Here are the other drivers you need...
    PCI\VEN_8086&DEV_9C3A:
    http://h20564.www2.hp.com/hpsc/swd/public/detail?s​p4ts.oid=6943827&swItemId=ob_135998_1&swEnvOid=405​...
    PCI\VEN_10DE&DEV_1140:
    If you have already installed the first two drivers, then just skip to the nvidia driver.
    First, install the Intel chipset driver and reboot.
    https://downloadcenter.intel.com/Detail_Desc.aspx?​​DwnldID=20775&lang=eng
    Next, install the Intel HD graphics driver and reboot.
    https://downloadcenter.intel.com/Detail_Desc.aspx?​DwnldID=24245
    Next install the nVidia graphics driver and reboot (that is the 3D video controller).
    http://www.nvidia.com/download/driverResults.aspx/​​75994/en-us

  • Need swappable CD rom drive for the Satellite 230CX

    After hours trawling the net, I still haven't found the part number for the swappable cdrom drive for the Satellite 230CX.
    Sadly a couple of sites say it's the PA2659U / XM-1402B, so I bought one from eBay, and it doesn't fit!
    Any help would be appreciated with either the straight answer or a pointer to a parts list.
    Cheers.

    Its an oldie.
    I dont found any information about this notebook.
    But usually it should be possible to order the supported and compatible CD rom part from the Toshiba service partner in your country.

  • External enclosure and hard drives for mac g5 quad

    I would like to add an external enclosure with two drives to my mac g5 quad. Does anyone have experience with these or do you know if this will work okay without issues?
    http://eshop.macsales.com/item/Maxtor/7H500F0/
    http://eshop.macsales.com/item/Other%20World%20Computing/MEFW924AL2K/
    also wondering if this enclosure has a fan or if that would be necessary...
    Thx

    I have the same case, only mine's the version that has PATA drives inside. It's pretty quiet and does have a fan. I've had no issues with it. It's setup with two 250GB drives striped into a RAID 0 configuration.
    I personally am not a fan of Maxtor drives - I prefer the Western Digital RE2 RAID Edition. I have two of these in an external SATA enclosure.
    What will you be using the drives for? You'll get better speed from the drives by putting them in an external SATA case, although this requires adding an eSATA controller card to the computer. A single WD RE2 drive is faster than my RAID 0 FW800 setup, and the FW800 setup runs pretty close to the maximum FW800 transfer speeds of about 80 MB/sec.
    I'm using a FirmTek Seritek 2EN2 enclosure and their 2SE2-E PCI Express card. OWC has a bundle with these two items. Like I stated earlier, I've got two 500GB WD RE2 drives inside (drives purchased from Newegg.com where they're less expensive).
    OWC also has a Mercury Elite eSATA enclosure which looks just like the FW800 one, only in black.

  • Oracle 817 client and MS driver for oracle

    Hello
    I had installed oracle 8.17 client on my machine.
    Suddenly, my datasource with "MS driver for oracle" seems not to be working.
    I uninstalled 8.17 and installed 8.16.
    No matter, what I do, I cannot get the datasource setup with "MS driver for oracle" work
    Anyone has similar experience
    -Aswath

    What error message are you seeing? I've never seen any conflict between the Oracle and Microsoft drivers.
    You could try downloading the latest version of the MDAC (Microsoft Data Access Components) from Microsoft <http://www.microsoft.com/data>. That will have the latest version of the Microsoft driver.
    I'm assuming that you have already tried deleting and re-creating your DSN. If you haven't, that would be a good first step.
    Justin

  • Using both internal and external drives for iTunes

    Hi
    I know this is a basic question . I did a few searches and my head started spinning .
    I've been using an external drive for my music but it only has 3GB left .
    My internal drive has 12GB so I would like to start to use it for storage of music along with the external . (I'll be getting a new mac soon)
    In Importing I have >Create file names with track number
    Advanced>Keep iTunes Music folder organized
    This is on my Panther eMac with iTunes 4.7.1
    thanks in advance for any help
    ----------bob
    Powerbook   Mac OS X (10.4.6)   Panther eMac

    The only thing you have to do is to click the 'Reset' button in Preferences>Advanced>General.
    Your 'iTunes Music folder location' will be reset to the default location on the internal disk.
    All new imported music will be stored there.
    New added music will be stored there if you have the checked 'copy files to iTunes Music folder location when adding to library' in Preferences>Advanced>General.
    When your new Mac arrives and you want to transfer the library, first copy the entire 'iTunes' folder (in ./Users/YourUsername/Music) from your eMac to the exact same location on the new Mac.
    To transfer the iTunes folder, you can burn it on CD or DVD, but a lot easier is to put the eMac in Firewire target mode.
    This article tells you how to do that:
    How to use FireWire target disk mode
    After the transfer of the iTunes folder is completed, connect your external drive and run iTunes.
    The new Mac will have a newer iTunes version and it will take some time to convert the old library format to the new format.
    Once all works OK and If you want all your music on your new Mac, use the 'Consolidate Library...' command from the Advanced menu in the menubar.
    All music from the external disk will be copied to the internal disk.
    Hope this helps.
    M
    17' iMac fp 800 MHz 768 MB RAM   Mac OS X (10.4.6)   Several ext. HD (backup and data)

  • Windows 8.1 and graphics driver for AMD Radeon HD7670m

    Hello
    Some time ago, i`ve had problem with updating my Windows8 (64-bit) to 8.1 (64-bit). The problem was with switchable graphics, only Intel HD4000 was working and i couldn`t fix it by Catalyst Control centre, by AMD support forum and by this forum as well. 
    I`ve seen this trouble a lot at forums, but i didn`t find the solution and reistalled my Windows 8.
    Switchable graphics worked, but only this only old driver. All newones that i`ve tried to use didn`t work, or worked incorrect. That`s one question: we have only old driver (8.962.10.6000) without updates for new games, OSs, etc?
    And another question is: was the problem fixed?
    Because i`d like to install Windows 8.1, but i don`t want to "play" with drivers, strange solutions (like install beta driver for Windows7, from AMD website) and other. I want a working notebook (pavillion g6 2368 sr) with switchable graphics and win8.1

    Hello @hi4man ,
    Welcome to the HP Forums!
    I understand you have concerns about upgrading your notebook to Windows 8.1 from Windows 8 and losing the switchable graphics feature.
    To use the switchable graphics feature you must use the drivers provided by HP on your products Drivers & Downloads page.
    The drivers for your notebooks GPUs are bundled into one installation, meaning the Intel and AMD GPU drivers are in one package. This package is supported on both Windows 8 and Windows 8.1 and is available here: AMD High-Definition (HD) Graphics Driver.
    Try installing this driver after updating to Windows 8.1 and let me know if it works.
    Note that you may need to disable the updates from Windows or the HP Support Assistant to have continued switchable graphics functionality.
    I look forward to your reply!
    Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    The Great Deku Tree
    I work on behalf of HP.

  • USB 3.0, SM Bus Controller and VGA driver for hp pro 3515.

    Hello i have a hp 3515 mt pc and i have problem installing drivers for usb 3 and sm buss controller and for vga driver.
    Where can i find the proper driver for my pc, i have the serial number that does not get recognized on hp suppor website and i don't know what drivers are compatible with my pc.
    Please Adviser.
    Best Regards.
    Anghel Gabriel

    Try using  the "Detect my Product" link on the HP support page instead of "Find my Product".
    HP Support "Detect My Product"

  • Apple plug-and-play driver for AOC monitor

    I just purchased a new 23" AOC monitor to "clamshell" with my macbook. I have purchased the appropriate cables to connect with my macbook to discover that the monitor software doesnt have a mac driver and the AOC website says to download a Mac Plug and Play driver to work with the monitor. The monitor turns on but mirrors my macbook and jumbles up my desktop. I am unable to locate one of these "drivers" with apple's help. Is anyone familiar with this issue that might be able to recommend a solution? I would hate to take my brand new monitor back.

    I just got my new MacBook 15 the other day and today decided to set it up wiht my AOC E2251Swdn monitor.  Black monitor screen.  Grrrr.  It worked fine with my old laptop (mid 2007).  I got the mini dv adapter as I saw it didn't have the DVI port I'm used to seeing.  However, the monitor when I got it only came with the old school VGA cord, not a DVI, thank goodness I finally had a use for the one that must have originally come with the previous laptop, and that worked just fine.  Right now I have the VGA cable with the DVI apple adapter then plugged into the DVI to Thunderbolt adapter.  Could this cord issue be why my monitor claims no signal no matter what I do?
    Also, when I looked for drivers and click the link in the post above, it downloads a folder for drivers, however, I dont' know what to do with the files in that folder (2251w.cat, 2251w.icm and 2251w.INF).  I have a hunch they are windows only. 
    If I need to get a strictly DVI cable I can do that, but would like to know if that's likely my problem before I buy it.  The monitor is only about 2 months old give or take. 
    Thank you in advance

  • Iphoto 6 and device driver for HUE hd webcam from Clique Communications

    After I installed the driver for that webcam (Clique Webcam 1.3 driver) iphoto iphoto started crashing as soon as I open it. The problem goes away if I uninstall the device driver. Anybdy has a fix?

    Welcome to the Apple Discussions.
    My first port of call would be the makers of the driver. Is it trying to install some portion of quicktime? It this version up-to-date?
    Regards
    TD

  • Newest Bios and platform driver for yoga 2 1051

    So what does this newest bios and platform driver supposed to fix? the readme doesn't say what exactly.  I hate to upgrade and end up with more problems.  It's good to finally have more drivers on there to do clean install but seems like still not all the drivers are there.

    wow no comment over 3 days.... guess no one upgraded ?

  • Can not find VGA driver for my Satellite A30-604

    I cant find a VGA driver for my SA30-604
    Help is neaded......

    Hi
    What??? I cant believe that.
    On the Toshiba page you can find the display driver!!! The driver was definitely published!!
    Toshiba published 2 drivers for XP (ATI and Intel) and 2 drivers for W2k (ATI and Intel)
    So check it out!

Maybe you are looking for