NEF files won't launch app

This is what I'm getting with almost every NEF file:
"file.NEF" is damaged and can't be opened. You should move it to the Trash.
Files seem to be intact, I can open them from Bridge itself or from Photoshop, just can't launch the apps from the file.
They were first transferred with iPhoto, which is suspicious, but also doesn't explain why some of them work just fine.
Anyone? Thanks
OS X Mavericks
Adobe CC
Message was edited by: david matos

OS X Mavericks
Adobe CC
There seem to be quiet a number of problems occurring between Mavericks and CC, Try also this article:
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
It may or may not been related to your problem but it is worth a try.

Similar Messages

I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won't launch apps. When asked say "launch Facebook" Siri responds with "it doesn't look like you have an app named Facebook" and I get the same results when trying to launch any

I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won’t launch apps. When asked say “launch Facebook” Siri responds with “it doesn’t look like you have an app named Facebook” and I get the same results when trying to launch any app. Siri works for everything else it just won’t launch apps. Any ideas? Thanks.

I have this same problem... Seems like nobody else does. Siri won't launch any apps for me, including native apps.

Siri Won't Launch Apps

I upgraded my new iPad (iPad 3) to IOS 6 and everything went well except Siri won’t launch apps. When asked say “launch Facebook” Siri responds with “it doesn’t look like you have an app named Facebook” and I get the same results when trying to launch any app. Siri works for everything else it just won’t launch apps. Any ideas? Thanks.

Hi ***- Finally got Siri working the way it was suppose to on my ipad3.... After doing a few things suggested by the Apple Store (just verbal help without an appointment setup) I actually setup an appointment today and took my ipad into the store- basically- it required erasing everything on the ipad- and instead of doing a backup using my computer- I had everything re-populate on the ipad from "icloud" while in the store- so far everything still seems to work ok- however I have no plugged the ipad into my MacBook Pro yet- - but everything I needed on my ipad was already stored on the cloud anyway- so once I plug into my MacBook Pro and see if Siri still works correctly- we will know if something on the MacBook caused the problem-
Hope this info helps you guys- so to recap without so many words-
After spending an hour with the Apple folks- they finally did an erase on my ipad-without it being connected to my computer-
Once the ipad erased and restarted- we tested Siri and it worked fine- then I typed in my Apple ID stuff- and over an hour or so- everything that was stored on icloud gradually downloaded onto my ipad-
I'm now home- and setting up everything else- and occasionally testing Siri during the process- tomorrow I'll plug in the ipad to my MacBook Pro and see what happens after that-

After installing Mav, my core apps won't launch ( app store, message, FaceTime) help! Im worried even if fix is released i can't access app store to upgrade/install

After installing Mav, my core apps won't launch ( app store, message, FaceTime) help! Im worried even if fix is released i can't access app store to upgrade/install?? Any one experiencing same problems

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

I uninstalled itunes, downloaded new version and the setup file won't launch. I'm running Windows Vista 64-bit. Can anyone help?

Is there an error message when you try to launch the iTunesSetup.exe (or iTunes64Setup.exe)? If so, what does it say? (Precise text, please.)

D600 .NEF files won't open in CS5 Camera Raw?

.NEF files taken on my new Nikon D600 won't open in CS5 Bridge Camera Raw.
Error Message: The Photoshop Camera Raw plug-in did not recognise the format of one or more files."
.NEF files taken with the Nikon D90 are opening perfectly.
There must be plug-ins available - I just can't seem to find them. Can someone send a link please?
I am working on a Mac
URGENT help please - I have a whole wedding to edit!

D600 raw files only open in CS6/ACR7.3. You need to upgrade your Photoshop. http://www.adobe.com/photoshop/
An alternative is to use the free DNG Converter to convert your NEFs to DNGs and those will open in older ACR versions. Another alternative is to get Lightroom 4.3.

Yosemite Won't Launch Apps

I installed Audacity the other day have been having problems ever since. Any new app install or updated app will not launch when I try to open them. The icon for that application just sits in the dock and bounces up and down. I found a post here that discusses this issue but its over a year old and Ive tried what they discuss with no luck. Here is the post.
Lion won't launch new or updated apps

When I try to post the crash report the 'Post' button just goes grey and nothing else happens

My NEF-files won't open with CS6 (osx 10.9.5) anymore...

In earlier days it was posiible to open my NEF-files (Nikon d300) with PS. It is not posiible anymore. Any suggestions?

have you tried to do a software update?

Photoshop no longer recognizes NEF files / won't open jpg files because of "missing marker segment"

I am running Photoshop CS6 on a 2013 iMac with OSX version 10.9.2.
1) As of today, Photoshop no longer recognizes NEF files. This has never happened before, and the files are coming from the same camera I've used for the past five years.
2) I receive the following message when I attempt to open a .jpg file "Could not complete your request because a JPEG marker segment length is too short (the file may be truncated or incomplete)."
This is also the first time this has happened, and happens with EVERY .jpg file I attempt to open.
3) Both of these errors ONLY happen when I am opening files located on the work server. I hit COMMAND K to connect to serveral work servers -- my work space, shared collaboration folder, and an image archive that was recently moved. If I grab the file that I want and transfer it to my desktop, and open it with Photoshop from there, it works fine.
I have run all updates.
I'm not sure if this is a Mac issue (with regard to accessing the work servers) or a Photoshop issue.
Any help is appreciated.
Thanks

Photoshop does "play nice" over networks, but seems to catch more OS and server bugs than other applications (mostly because we've added more error detection code over the years after dealing with many OS and server problems).

Windows 8.1 Photoshop CS5.1 D800 NEF Files won't open?

I have recently installed windows 8.1 and as a result I had to reinstall Photoshop CS5.1. After doing so I find that Photoshop will not open my Nikon D800 NEF files. I have downloaded and installed the raw file updates from both Windows and Nikon but the files still are not recognized by CS5.1. The files did open with no problems when I was running Windows 7.
Any suggestions?

What you need to update is the Camera Raw plugin in Photoshop (ACR). Reinstalling Photoshop reverts ACR to the shipping version.
You need the very latest ACR version that will run under Photoshop CS5, which is ACR 6.7. This was also the first ACR version to support the D800.

Clicking Files won't launch in default app

MBP-15in. Mid 2012, Running OS X 10.9, 4gb DDR3
This is mildly infurating but, clicking on files (PDF, docx, doc, xml) files in smart folders or finder won't open in their corresponding application. The application does launch but the file will not show up. I can go through the menu bar and open them from inside the app (MS Word and Preveiw). There are some files in the same folder location that will open like the orginally did that are from Pre/Post Maverick installation while others that don't open are also Pre/Post Maverick.
I have tried: restarting the Finder, Repairing Disk Premissions, Updated all software, Spot Light is not indexing
Side Note* I nothing happens when clicking the ? in the System Prefences; Dont know if its related

--Solved my own question: I forgot trying restarting the mac and appears everything is fine now.

Quicktime files won't launch - ask for an obsolete version of the QT app

I just bought a MacBook Pro (OSX 7.3), copied everything over to it, including apps, from my Powerbook G4 (non intel; OSX 10.5.8). Now none of the mp3s on my MacBook will open when I click on them; the error message states that I must have Quicktime 7.2 which is not on this machine (and indeed it's not). The MP3s will however launch from within the Quicktime 10.1 app that came in when I updated the MacBook Pro software.
So - how can I convince my MacBook to make Quicktime 10.1 my default mp3 player app (and not QT 7.2)?

That worked - many thanks.
But the Get Info drop-down selection box was still headed by "Quicktime" with the old logo (v7.2) as default. In the list of alternative apps below was Quicktime with the new logo (v10.1). I made that the new default as you suggested, so all's well.
But evidently my computer still thinks v 7.2 is around (and v 7.1 and 7.6) - maybe in a library somewhere - since they're still appearing as choices in that Get Info dropdown menu.
No problem I suppose, but curious.

Double clicking a file won't launch the application.

I have a problem with Quark 4.11 and Acrobat 5.0.
When I try to launch the apps by double clicking on my file icon, Acrobat tries to launch but does nothing and Quark gives me a -39 error.
This happens on all files.
File I create and files that I receive from customers, so I know that it is not a single damaged file.
Acrobat has been doing this for several months but quark just started 2 weeks ago. Quark started doing it just after I rebuilt my desktop.
I should mention that I can open files from within the application or if I drag the file icon on top of the application icon.
Short of reinstalling the apps, whan can I do?
Can I zap the pram?
G4 AGP Mac OS 9.2.x

Hello Jack,
In addition to advice already offered I would try allocating more memory to the 2 applications in question. If unsure how to do this...post back.
Secondly, do a sherlock for Quark.....see if you have several alias of the original app. I would try to only have 1 or 2 aliases.
Try the memory thing first......Error -39 is a ROM related error. It pertains to "end of file error". I must admit I don't know what that is.
Also you could try closing a few apps. Then see if the files open the job correctly. This is not a fix but would indicate a memory issue. Lastly be sure you have enough free space on the HD. It could be time to back up and remove some items on the HD in order to create room....HTH........Jim

PDFs, ZIP files won't launch or download when clicked.

When I click on a link to a pdf or zip file in Safari, I'm no longer able to view the pdf in my browser with the Preview plugin, nor am I able to download the pdf (or zip file.) On clicking, a new blank window launches, but that's it. Nothing downloads or loads.
I've tried reinstalling Safari, and that doesn't work. Anyone have any thoughts?
p.s. I want to view pdfs with Preview ideally, not Acrobat. Acrobat is way too sluggish.

If you have Adobe Reader installed, there has to be a plugin installed in that folder, unless you deleted it at some point. It may be called AdobePDFViewer.plugin, and it can only be in that director path that I gave you: HD/Library/Internet Plug-Ins. Check to be sure it's not there.
Once you're sure it's not there and Adobe Reader was deleted, quit Safari if it's running, paste this command in Terminal, press Enter, then quit Terminal:
defaults write com.apple.Safari WebKitOmitPDFSupport -bool False
Restart Safari and try dragging a PDF file from your Desktop or elsewhere on your Mac into an open window and it should display without any problem.
Mulder

Embedded swf file won't launch pop-up in safari

The following page has an embedded swf file which when clicked is supposed to launch a 800x600 pop-up html file.
http://www.artfair.com.au/index-2008.htm
The action script I'm using in the movie is
on (press, release) {
getURL("javascript:openNewWindow('http://www.artfair.com.au/2008_interim/htm/in terim.htm','interim','height=600,width=800,toolbar=no,scrollbars=yes')");
The html code is:
<BODY bgcolor="#FFFFFF">


<OBJECT classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000"
codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#ve rsion=6,0,0,0"
WIDTH="100%" HEIGHT="100%" id="2008" ALIGN="">
<PARAM NAME=movie VALUE="2008.swf"> <PARAM NAME=loop VALUE=false> <PARAM NAME=menu VALUE=false> <PARAM NAME=quality VALUE=best> <PARAM NAME=salign VALUE=LB> <PARAM NAME=bgcolor VALUE=#FFFFFF> <EMBED src="2008.swf" loop=false menu=false quality=best salign=LB bgcolor=#FFFFFF WIDTH="100%" HEIGHT="100%" NAME="2008e" ALIGN=""
TYPE="application/x-shockwave-flash" PLUGINSPAGE="http://www.macromedia.com/go/getflashplayer"></EMBED>
</OBJECT>
</BODY>

Doesnt work on any browser
XP:
IE6
IE7
FIREFOX2
or OS X 10.4.9
safari or ff2
post the code on Adobe.com's forums for the flash developers as theyll be able help you recode the link as ive noticed int eh XP browsers it tells me its a javascript error, ill take a nothe rpeak at the flash document/javascript and see if i can pick apart what might fix it but for the meantime id suggest submitting this to the flash forums as its a Flash/Javascript/Actionscript issue not a Safari issue
=]
ill let you know if i notice anything before you find a solution.
also let me know if you do find the issue because ive been looking to put together a pop up window in flash but none seem to work properly.

NEF files won't launch app

Similar Messages

Maybe you are looking for