.nef Nikon D5100 is not displaying right in Camera Raw

Hello,
these two images show the exact same .nef file being opened in two different programs. The first one with the blown out colors is opened in Adobe Camera Raw. The second one is opened in Nikons View NX 2 software. This is also the way I see the photo on the display of my Nikon D5100 camera. I really would like to handle my .nef files in Bridge and Adobe Raw and not in Nikon View NX2. Can someone help me with this please? I have Photoshop CS5.1 (64bit) and Camera Raw 6.7.0.339.
Thanks in advance,
Thomas

Hello,
Thanks for the reply. How do you switch the camera profile please?
I can adjust the settings in ACR so that it looks more like the Nikon Software, but it's not easy to match this. Also, when I pull vibrance to -100 for example to regain the detail, a lot of noise appears. You'll have to admit that there is a BIG difference here between the two images. (both are untouched)

Similar Messages

  • How to change preference setting in Photoshop CC 2014 to not automatically lauch Adobe Camera Raw when opening Nikon raw .NEF file

    When I launch Photoshop CC 2014 and then open a .nef raw file it launches Adobe Camera Raw and I click Open Image, then I "Convert to Smart Object" then launch Filter > Camera Raw Filter.  Is there a preference somewhere for raw files that just bring you right into Adobe Photoshop without stopping at Camera Raw first?  Thanks!

    Gene,
    Ah!  Okay, makes sense now.  I just learned tonight that some features are not available when using Camera Raw as a Smart Filter.  One being Lens Profile Correction.  So it makes sense to have have Camera Raw open right off the bat to make some tweaks first then continue on.  I found the below on the Adobe website.  Thank you so much!! 
    Note: The following features are not available when using Camera Raw as a Smart Filter (that are normally available in Camera Raw), primarily because they don’t make sense in the filter context: Workflow options and preferences, crop and straighten tools, rotation tools (rotate left/right buttons), snapshots, camera and lens profile corrections.

  • Captivate 4 shortens timeline - elements are not displayed right anymore

    Hi there,
    I already searched the forum but couldn’t find an answer. Maybe someone of you can help me.
    I have a weird problem with the timeline – in short: it changes.
    I have some slides, based on imported Power Point slides. Within captivate I add some Audio (TTS), let appear images & textboxes simultaneously, add buttons etc.
    Sometimes I extend the slide duration (for example when slide transition is set to automatically).
    And now the problem that occurs: Captivate shortens the timeline – exactly to the length where the audio ends. Doing this causes that elements which are placed at the end of the slide are also shortened and not displayed right anymore.
    This is shown in the following screenshot. On the left side of the cursor you can see an image element that normally should fade in directly after the audio ends and should stay for 4 seconds.
    I couldn’t figure out when this happens. This means that I have to check every slide again to make sure that all elements are displayed right. Locking elements or the slide itself doesn't help.
    Does anybody know why this happens and how to avoid this? I am using Captivate 4 and publish as an .exe or an .swf
    Your help is appreciated. Thanks a lot!

    Hi Noel
    If you click Edit > Preferences > Global > Defaults do you have the option Calculate caption timing enabled?
    If so, that's likely your issue. Clear the option and your timing should stay put when you make edits.
    Cheers... Rick
    Helpful and Handy Links
    Begin learning Captivate 5 moments from now! $29.95
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcererStone Blog
    Captivate eBooks

  • Get an Error window, The source folder does not contain any supported camera raw files

    I am using CS2 and it would not open up my latest RAW files, I was getting a warning Could not complete your request because it is not the right kinds of document. So, I checked the Camera Raw Plug-in and it says Version 3.7. I see that my camera an Olympus E-20 is supported. But it is not opening the Raw files, the day before I took jpeg and they have opened. I will not trash my Adobe Photoshop CS2 because it was a royal pain to install and I don't know where the CD is.
    I installed the latest DNG Converter and when I try to open up the folder which has all the RAW images that didn't open in Adobe, I still get an Error window that says, "The source folder does not contain any supported camera raw files." Why? It says it supports my Olympus E-20. I actually have the E-20n, I don't think that is the problem. My RAW icons usually show up as small image thumbnails and this time they are gray icons only with the incorrect date under the icon. Is there another product I can use without spending money? These images I took in RAW were special and I don't want to lose them. Please help!
    Esther

    Hello, I was using only CS2 with my Olympus E-20n for 5 years, no problem. It just started acting up in RAW this year. I downloaded Picasa that same day and now it seems to be opening up all of my RAW files that didn't open the other day. So, I think Picasa installed a new plug-in adaption to CS2 because now all my RAW icons have a new logo on them, the same one that's in Picasa. Strange, but it works now and I am not complaining anymore. I love CS2 and the many ways I can adjust RAW files, so I am using it, Picasa is a sideline now that I can take a look at many thumbnails and it organized all my photo files by the year and folders. Amazing free software. I have probably 60,000 images in my computer and an external hard drive and Picasa picked them all up and made a library, cool.

  • When I highlight photo's in bridge and then click open in camera raw this message comes up... Camera Raw Editing Is not enabled...Camera raw editing requires that a qualifying product has been launched at least once to enable this feature. I have used cam

    When I highlight photo's in bridge and then click open in camera raw this message comes up... Camera Raw Editing Is not enabled...Camera raw editing requires that a qualifying product has been launched at least once to enable this feature. I have used camera raw a different way but it won't seem to work with bridge.

    Have you opened Photoshop or any other Adobe app that Bridge works with?  You need to do this if you've upgraded PS or just signed up for CC.

  • I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

    I have downloaded DNG Profile Editor 1_0_4 and prepared a profile which I can not see in my Camera Raw 6.0 (I have photoshop CS5). Could you please give me an advice?

    Uninstall Trusteer software
    http://www.trusteer.com/support/uninstalling-rapport-mac-os-x
    Remove Sophos
    https://discussions.apple.com/message/21069437#21069437

  • Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW What is the problem?

    Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW. How can I correct the problem?

    What kind of TIFFs?  Are they multi-layered, for instance?  ACR will not open layered files.
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Bridge does not save adjustments in camera raw when I press done

    bridge does not save adjustments in camera raw when I press done

    baines0788,
    Next time, please be precise when asked for details.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW

    Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW - PS 6

    Sorry I'm taking to along, but I checked a few things using ACR 8.6
    Saved a png as an 8 bit tiff, then to 16 bit. Changed the background layer into a floating layer, all opened in ACR.
    It was when I added an adjustment layer, that it no longer opened in ACR.
    Now what can I recommend? If you have Lightroom, you can Import and work on your layered tiffs that way. I hope this is a viable alternative for you, because I think ACR does have a problem with layered tiffs and I don't really know of any workaround, but you are free to explore.
    Gene

  • NEF Nikon D5100 - displaying too dark in LR

    I just bought a Nikon D5100.
    While importing the NEF files, LR firstly shows the images with the correct exposition (equal to the ones previewed in camera), then two seconds after (after fully rendering the image) LR darkens the images, so that they seem underexposed by 1 or  2 stops.
    I was using LR 3.4, then I updated to 3.5 and later on to 3.6 and in every version the same happened.
    The same pictures viewed in ViewNX2 appear with the correct parameters. So, I believe that LR does not read the camera adjustments?
    The JPG images are also shown with the correct parameters.
    Does anyone know how to solve this problem?
    Thank you.

    Using ExifTool to examine the shooting parameters of each example photos posted, here, it appears that both the Exposure and the Flash were set to Manual mode; hence the term to “operator influenced” because the camera was doing what it was told by the operator rather than using its own metering.  Exposure Compensation only has an effect if camera metering is controlling the exposure.  In M mode, the value is merely being recorded but not utilized.
    The Flash-related info for DSC_0074, paying special attention to the power being only 1%, is:
    Flash                           : On, Return not detected
    Flash Setting                   : Normal
    Flash Type                      : Optional,M
    Flash Exposure Compensation     : 0
    External Flash Exposure Comp    : 0
    Flash Exposure Bracket Value    : 0.0
    Flash Mode                      : Fired, External
    Flash Info Version              : 0104
    Flash Source                    : External
    External Flash Firmware         : 6.01 (Unknown model)
    External Flash Flags            : Fired, Dome Diffuser,
    Flash Commander Mode            : Off
    Flash Control Mode              : Manual
    Flash Output                    : 1%
    Flash Focal Length              : 14 mm
    Flash GN Distance               : n/a
    Flash Color Filter              : None
    And the Flash-related info for DSC_0115 is:
    Flash                           : On, Return not detected
    Flash Setting                   : Normal
    Flash Type                      : Optional,M
    Flash Exposure Compensation     : 0
    External Flash Exposure Comp    : 0
    Flash Exposure Bracket Value    : 0.0
    Flash Mode                      : Fired, External
    Flash Info Version              : 0104
    Flash Source                    : External
    External Flash Firmware         : 6.01 (Unknown model)
    External Flash Flags            : Fired, Bounce Flash
    Flash Commander Mode            : Off
    Flash Control Mode              : Manual
    Flash Output                    : 12%
    Flash Focal Length              : 50 mm
    Flash GN Distance               : n/a
    Flash Color Filter              : None
    For reference, ExifTool can be downloaded from:
    http://www.sno.phy.queensu.ca/~phil/exiftool/
    and can be used by dragging and dropping an image file onto the EXE that is renamed exiftool(-k).exe
    For a friendlier interface, something like ExifGUI can be used:
    http://u88.n24.queensu.ca/~bogdan/
    In summary, if the EXIF information is to be believed, these images are dark because the camera was being told to shoot with settings to dark for the other lighting.  Does this sound right, or did you use the camera and/or the flash in TTL mode, which should have allowed the camera and/or flash to make things bright enough with more motion or focus blur as the shutter became slower or the aperture became wider.

  • Mpower max 780 lightning UEFI not displayed right and windows 8.1 no DVI-input

    Hi all,
    I’m new to the forum, I’m very sorry that my first post is the posting of a problem.
    I’ve read several treads just to be sure I’m not asking the same question twice.
    In this case I have 2 problems, both are problems more users have issues with but not as a combination of both, that’s why I posted it.
    I’ll start with my rig:
    Intel i7 4770K
    MSI Z87 Mpower Max
    MSI Geforce GTX 780 lightning
    Crucial Ballistix tactical BLT2C8G3D1608ET3LX0CEU
    Crucial 2.5" M500 480GB
    Seagate Barracuda 7200.14
    Seasonic Platinum Series 860 Watt
    Asus VG248QE monitor
    The problems
    After installing my rig myself I stated it up and everything worked fine.
    Installed windows 8.1
    Installed a few games (I couldn’t wait to try it out)
    Then after shutting down and starting up de the next day the problems started
    The bios screen wasn’t displayed right:
    - Resolution isn’t correct
    - Getting art-effects when trying to adjust a setting in the bios
    - When saving, bios is stopt working with an error message that the bin file is incorrect
     so setting up the bios is a big problem
    The second issue is that when I let it go and load windows 8.1:
    - It shows the partially BIOS image (big yellow M)
    - Then the windows logo with the loading circle
    - Followed by a black screen and my monitor telling me that there is no DVI signal
    What I’ve done so far:
    A windows 8.1 repair (so everything whipped) “fresh” install on my SSD then again install of the Nvidea driver.
    This worked for a hours of gaming funn, with 3 or 4 reboots of the system (so I thought problem fixed).
    Sadly not, I began to check the forums and found that I needed to run W8.1 in safemode to clear the Nvidea drivers en again install the latest version along with the Intel VGA drivers.
    I’ve tried that but no luck on that one.
    And yes I’ve tried to clear CMOS (several times)
    I’ve tried to flash the BIOS but I can’t select my USB drive when I press F11 (so I’ll be trying another USB stick soon)
    Getting the bootsequence to boot from USB isn’t an option also because of the bios screen issue.
    Does anyone have the same issues, or even better does anyone have a solution to all my troubles?
    Thanx,
    Quasi

    Quote from: flobelix on 22-November-13, 02:03:09
    Ok it is in legacy mode then. Waiting for your report. If it comes up on the igpu also check the bios version. Would be better than guessing.
    Oke tested the HDMI cable, after starting up finally i got a normal BIOS view again.
    BIOS Version E7815IMS V1.2 (so it's 1.2 instead of 1.0) so much for guessing...
    As expected windows started normally in high resolution.
    So i think the problem is that the MB bios doesn't work wel with the videocard or the videocard is DOA.
    any thoughts for the next step?

  • Fonts are not displaying right

    I'm creating a website with Muse and I need to use Scandic letters. But they don't seem to work. I've tried both web fonts and web safe fonts but the letters are still not displayed. I have closed Muse and relaunced it with no success. I'm using the latest version. In previous versions I didn't have any problems like this.
    The site is www.sumiaispiiras.com I really need help to solve this fast.

    Hello,
    what I was doing was launching the website without doing it in Business Catalyst (through ftp directly to my web host using my own domain) however the fonts didn't work. So I tried to launch it in BC and the fonts were working perfectly there. After that I contacted my system provider (web host) and what they did was  that the added .htaccess file  "AddDefaultCharset UTF-8" to my homepage. So the problem was that they didn't have the same code as what Muse uses. So if anyone has the same problem, try to publish the page in BC and see if the fonts work there if they do the problem is not with Muse.

  • My Photoshop Elements 11 works with RAW from my Nikon D5100 but not with my D5200?

    Is there a download to cope with the greater number of Mbs in the D5200 image?

    Abeldacre wrote:
    Is there a download to cope with the greater number of Mbs in the D5200 image?
    Explanation here:
    http://forums.adobe.com/thread/1030798?tstart=0
    Each camera model has its own raw format. The  5200 format was issued after PSE11.
    http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
    http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
    So 3 solutions :
    - use the Canon software to convert to tiff files that can be edited by Elements editor
    - update to PSE12
    - (my advice) use the free Adobe DNG converter to batch convert your raw files to the DNG format. Your PSE11 will be able to edit them and you'll keep all the advantages of raw editing.
    The size of your raw files are not relevant here.

  • Photoshop CS6 Mac version not noticing the updated Camera RAW

    I am trying to download the newest camera RAW DNG converter 8.6 plug-in on Photoshop CS 6 on a Mac computer.  I have photoshop searching in the correct folder under Photoshop>Preferences>Plug-ins..., and yet when I search for the latest version that photoshop is using in, Photoshop>about Plug-ins> Camera Raw, it only displays the original version, not the updated version. this happened with prior Camera RAW versions as well.  how do I get photoshop to see the updated plug-in?

    Go to Photoshop's Help Menu > Update
    Let the Adobe Application Manager download and install the plugin for you.
    Stolen from another thread, but here's where the Camera Raw plugin is installed.

  • Almost in tears-have CS5, recently upgraded to Nikon D7100, now I can't open Camera RAW

    I bought CS5 in 2011 to use with my D90.  I recently upgraded the camera  Now, when I try to edit my RAW files in Camera Raw, I get a popup that my camera isn't supported and I need to download an update.
    I've downloaded DNG 7.1 (I think), and the latest 8.x and neither worked.  When I go in Bridge and do the Plug in info-it's showing as running 6.
    Then I tried to go through Help and Updates in Bridge to update all of them that way.  That didn't work either, it fails to download.
    I'm almost in tears....I've taken pictures in raw and I can't edit any of them in raw.  I don't know what else to do and now I'm realizing, for the first time because now I need it, Adobe's Customer Service is horrible....I can't find a phone number to have someone walk me through what I'm doing wrong anywhere.  I'm frustrated, sad, aggravated and really disappointed.  This should not be that difficult.
    I'm on a Windows machine.
    Please, I'm begging, help me and explain this in layman's terms, because computer technology is not my forte.

    This is because CS5 only supports up to ACR 6.7.1. Support for the D7100 was added in ACR 7.4. You will need to use the free Adobe DNG converter:
    Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.7.1
    Open the folder containing your NEFs and convert to the universal DNG raw format and edit away in ACR 6.7.1...
    Benjamin

Maybe you are looking for

  • BEX Error: SYST: Period 053 is not valid in financial year variant M2

    Hi All, We have a merchandising report which bring the data for current year and previous year. While I execute the data for Fiscal Year/Period - 011.2011, I get the output. But when I execute the report for Fiscal Year/Period - 012.2011, I receive t

  • How to use a concatination in PL/SQL

    HI All, let me tell my table structure. Columns are like this 01 02 03 -----31 (varchar2 type) this is working fine   declare yr number not null:=2011; mnth varchar2(30) not null:='Jan'; srt_date number; end_date number; v_date number; l_col varchar2

  • Where does iWeb save local .html files?

    The answer that keeps coming up is "domain". I see all my images, music, what-have-you, but not the actual html files. Are they there somewhere and I just missed them? I need to find them so I can upload single pages and the entire site every time I

  • Elements 9 reloading

    Hi all I have Creative Cloud, but I am wanting to also have my Elements 9 running due to functions I want to still use. I have downloaded the software, but for some reason it will not run. Does anyone have any clues as to what it might be?  Is is the

  • Key not valid error message when trying to download software

    i cant download software for my envy 5532 keep getting error message ( key not valid for use in specified state ).  This question was solved. View Solution.