.nef Nikon files not opening in CS5

OS X 10.9.2 - New Nikon D7100 .nef files will not open in CS5 - Camera Raw 6.7.1 - I tried to update Camera Raw to 7.1 but to no avail. What else can I do? TIA

That camera requires at least Camera Raw 7.4, which is not compatible with Photoshop CS5. The cheapest option would be for you to use the latest DNG converter to create digital negative copies of your NEF files. Those can be opened with what you have now. Or, you could add Lightroom to your workflow. Or, you could upgrade your Photoshop.

Similar Messages

MOV Files not opening in cs5

I Have quicktime installed and it still says photoshop cannot open the file type

The trial is always Extended. Anyway, what files are you trying to import exactly?
Mylenium

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

I have just purchased a Canon 7d Mk2 but the raw files will not open in Cs5 and downloads of Adobe Camera Raw 8.7 will not install. What can I do?

Alternatively, install & use RawTherapee instead to develop your raw files instead (free and open source).
http://rawtherapee.com/

I purchased PS CS6 recently as a student. At TAFE today we were instructed to convert our NEF (nikon) files to dng files using the converter in Bridge. However when I got home I don't seem to have the converter as far as I can see. Can you help me plea

I recently purchased PS CS6 as a student. At TAFE today we were shown how to convert NEF (nikon) files to dng in Bridge. C
an anyone help me find the converter please?

Adobe Camera Raw (ACR) would be the converter to do this from Bridge. In Bridge, select your nef files then Open in Camera Raw. In ACR, 'select all' then Save Images button at bottom of ACR and set save format to Digital Negative. (File extension should show dng.)

Getting Message as "File not open", when I ran background Job

Hi,
I developed a Migration Program, Which reads the data from Application serever and procced with further process in back ground mode.
Same program is workind fine in Development System in Back ground mode (SY-BATCH = 'X', Scheduled a batch Job). So I transported to Quality system.
Now When I run the program in background mode (SY-BATCH = 'X', Scheduled a batch Job), getting Message as "File is not Open" at Quality system. So I debugged the Batch job through "JDBG", and found file opening and reading the content sucessfully.
But its not working without debugging mode and getting message as "File not open".
Is there any Authorizations required for background mode (without debugging).
So can you please help me on this how to solve this issue.

Try this code:
DATA: PATH_NAME(80) TYPE C,
        LV_FILENAME TYPE STRING.
DATA: LW_XSTRING         TYPE XSTRING,
        X_LEN             TYPE I.
DATA: FILE_AUTH_ERR TYPE REF TO CX_SY_FILE_AUTHORITY,
        FILE_OPEN_ERR TYPE REF TO CX_SY_FILE_OPEN,
        FILE_OPEN_MODE_ERR TYPE REF TO CX_SY_FILE_OPEN_MODE,
        FILE_CLOSE_ERR TYPE REF TO CX_SY_FILE_CLOSE,
        FILE_CONVERSION_ERR TYPE REF TO CX_SY_CONVERSION_CODEPAGE,
        FILE_TOO_MANY_ERR TYPE REF TO CX_SY_TOO_MANY_FILES,
        MESS TYPE STRING,
        W_TEXT TYPE STRING.
DATA: L_RC TYPE INT4.
concatenate pathname lv_filename into lv_filename.
TRY.
      OPEN DATASET LV_FILENAME FOR INPUT IN BINARY MODE MESSAGE MESS.
    CATCH CX_SY_FILE_OPEN_MODE INTO FILE_OPEN_MODE_ERR.
      W_TEXT = FILE_OPEN_MODE_ERR->GET_TEXT( ).
      L_RC = 1.
    CATCH CX_SY_FILE_AUTHORITY INTO FILE_AUTH_ERR.
      W_TEXT = FILE_AUTH_ERR->GET_TEXT( ).
      L_RC = 2.
    CATCH CX_SY_CONVERSION_CODEPAGE INTO FILE_CONVERSION_ERR.
      L_RC = 3.
      W_TEXT = FILE_CONVERSION_ERR->GET_TEXT( ).
    CATCH CX_SY_TOO_MANY_FILES INTO FILE_TOO_MANY_ERR.
      L_RC = 4.
      W_TEXT = FILE_TOO_MANY_ERR->GET_TEXT( ).
    CATCH CX_SY_FILE_OPEN INTO FILE_OPEN_ERR. "File already open
      L_RC = 5.
      W_TEXT = FILE_OPEN_ERR->GET_TEXT( ).
ENDTRY.
IF L_RC = 0.
    L_RC = SY-SUBRC.
ENDIF.
IF L_RC <> 0 OR SY-SUBRC NE 0.
Issue Error message in open file.
   CONCATENATE MESS 'Open dataset failed' w_text INTO MESS SEPARATED BY SPACE.
   message Exx(yyy) with mess.
      ELSE.        "file exists and can be opened
ENDIF.

PDF File not opening in browser for sharepoint 2010

Recently we have moved our web application from one server to another in Sharepoint 2010. Back up of entire web application was taken and restored in another server. But in the new server , the PDF files in the document library is not getting opened in browser.
it always open in browser
I have already made following changes but didn,t work
Set browser file handling to Permissive from central admin
Set "open in browser" in setting s of doc library
Set the doc library file handling property using $docLib = $web.lists["Your Document Library Title"] $docLib.BrowserFileHandling = "Permissive" $docLib.Update()
Added "AllowedInlineDownloadedMimeType.Add("Application/Pdf") in web app
Installed Adober eader in client machine
Even after trying all these, the PDF files are still opening in Client application(Adobe reader) but not in the browser
It would have been great help if anybody provide a solution for this. I have been banging head on this for two days

It would be handy if you didn't double post too.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you. The solution 2 Powershell that deals with updating the Inline MimeType may help.
http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

JNLP file not opening in Windows 8 and IE 10

I am trying to launch the ROES ordering tool through WHCC prints and it has always worked on my other IE 10 through Windows 7 but on my new computer with Win 8 I cannot get it to launch because of the JNLP file not opening... and it won't work on desktop
mode either... What do I need to do??

Hi,
Have you installed the java Runtime Environment?
If not, I would also suggest you to refer to the link to install the latest version of Java:
http://www.java.com/en/
Please note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
Then follow the link to set default programs as Java for the file:
Choose the programs
Windows uses by default
http://windows.microsoft.com/en-US/windows-8/choose-programs-windows-uses-default
Hope this helps,
Ada Liu
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Pdf file not opening on pushing fdf file with F key in Adobe Reader

Well i am a novice developer in case of PDF Development.
The problem which i am facing is:-
In our application a PDF document submits the data to server and server sends back FDF to client with f key as http path of PDF which is present on web server.
This all works well in acrobat professional 7.0 but in abobe reader 8.0 the PDF file doesn't open up on pushing FDF.
On debugging the problem i found out that if server sends response within 480 milliseconds then reader is showing the pdf otherwise it don't shows up.Since in our application it will always take more than this time because of several operation performed to serve the request posted to server,So the
PDF will never show up in case of reader.
I was unable to understand what make it special in acrobat professional that session lasts more than 480 milliseconds whereas in reader the session doesn't last that long.
I really need uregent help on this.
Thanks in advance for help.

It would be handy if you didn't double post too.
http://social.technet.microsoft.com/Forums/sharepoint/en-US/81ed0362-4033-4a31-b265-c1aba43c3d14/pdf-file-not-opening-in-browser-for-sharepoint-2010?forum=sharepointadminprevious
To answer your question, you've tried most things that I normally see working, but there may be an extra solution here for you. The solution 2 Powershell that deals with updating the Inline MimeType may help.
http://www.pdfshareforms.com/sharepoint-2010-and-pdf-integration-series-part-1/
Steven Andrews
SharePoint Business Analyst: LiveNation Entertainment
Blog: baron72.wordpress.com
Twitter: Follow @backpackerd00d
My Wiki Articles:
CodePlex Corner Series
Please remember to mark your question as "answered" if this solves (or helps) your problem.

Quick Time file not opening

Suddenly QuickTime 7.5.5 stopped opening the movies stored in one Hard Disc.
Here are descriptions of how problem occurs:
1) The preview in finder +column view+ shows only blank space, but not a movie.
2) Instead of opening the file QT claims that "This is not a movie file"
3) Not all the movies in the disk are injured but about 80 % of them. There might be in same folder movies that behaves normally and movies that behaves as described above.
I have restarted the machine few times and repaired the disk with disk utility, with not any couraging results...
If there were any ideas what the problem might be, and how to fix it, advices would be very much appreciated.
Screenshots of the problem:
http://koti.welho.com/tsuonio1/File-not-open.jpg

Two possibilities spring to mind. One is that the HD itself has been damaged somehow. Try copying one of the "bad" video files to your boot drive and opening from there. If it won't copy, your HD is clearly bad, if it copies and plays then something weirder is going on with the drive.
The other possibility has to do with the h264 codec you used. Apple's implementation of the H264 standard is a work in progress, they've been gradually adding features that are part of the full standard and may have broken something. If you recently upgraded QT that may be the problem. If you created the files using a third party H264 codec that might explain the playback problems. Also, you should install Perian (www.perian.org) and see if that helps, their codec plays back many formats that Apple doesn't support out of the box.
You may need to upload one of the bad files to an filesharing website of some kind so that other folks here can download and look at it themselves.

.indd files not opening with recently installed Indesign CS3

The .indd files don't have the Indesign icon next to them, instead they have the win32 icon. When I double click on one of the files an error message appears telling me that...
"this file is not a valid win32 application"
Even when I right-click on the file and choose to open with Indesign, it tells me the same thing. Also in this options menu, Indesign is not shown with the Indesign logo next to it, but rather the windows generic 'unknown file type' logo.
If I open Indesign first however, and then choose file>open and choose the file. It opens fine.

Exactly my situation yesterday, with the icon disappearing and INDD files not opening within InDesign from Explorer.
I'm using an early XP Pro, which I guess qualifies it as 32 bit.
The steps to rebuilding everything using the Folder Options in Windows Explorer are:
Tools > Folder Options > File Types
If INDD is not listed, click the New button to creat an entry, otherwise select it and click the Advanced button.
You have an option to change the icon, so navigate to C:\Program Files\Adobe\Adobe InDesign CS3 and select the InDesign icon.
Then under actions you need to create four actions that will relate to the context menu choices when you right click an INDD files, so click New and add actions for edit, open, preview and print.
In the Application used to perform action box enter "C:\Program Files\Adobe\Adobe InDesign CS3\InDesign.exe" "%1"
Those quote marks are important. Just browsing to InDesign.exe will fill the box for you, but for some reason - for me at least - it creates the %1 indicating to open the file you selected, but it doesn't wrap it in quotes. And without those quotes (at least on my machine) InDesign will start but won't load the file.
There is also a check box to use DDE. I don't know what's appropriate here, but I ticked the box and it works OK.
k

NEF files not opening in camera raw in CS5

I have lightroom 3.2 and photoshp CS5 extended
I am running if 64 bit in Windows 7
If I try to open a .nef file from lightroom usinf crtl-e it does not open in the raw editor. it goes directly to what I would call the jpeg editor.
Now can I get my .nef files to open from lightroom into CS5?
If I open the .nef file from bridge it opens in camera raw just fine, or if I open it from windows explorer it opens in camera raw.
Help! this is very frustrating!!
Thanks in advance.

If LR is 3.2 and ACR is 6.2 (or they are otherwise synchronized to an older or newer version) then LR will tell PS to use ACR behind the scenes to render the file on the way into PS w/o having to go to an intermediate file and w/o seeing the ACR interface. LR does not render anything, ACR does, but you don't see it, except maybe a progress bar if it takes too long.
The adjustments in LR are the same as ACR so there's no need to show the ACR interface, right? When LR and PS are being used together, LR is meant to be the keeper of the adjustments in its database that ACR knows nothing about. If the ACR UI was visible and you tweaked something in ACR after coming out of LR it wouldn't get stored back into the LR database unless you synchronized the folder, later, and things would be a confusing mess.
Alternatively, if the LR and ACR version's aren't synced up, then LR may indeed render a TIF or PSD for PS to open, but again w/o ACR doing anything. So in no circumstance of LR-PS integration should you see the ACR plug-in when you tell LR to open into PS.

D800 Files will not open in CS5

I cannot open NEF (RAW) files from my Nikon D800. I have upgraded the Camera RAW filter to 6.7. I have installed DNG 8.1 all without results.
Notes: If I use Camera Control Pro 2 (tethered) to import the files the files open just fine in CS5. If I import the files using Pro Control 2 and then copy and paste the files into folder they open just fine.
Any help is appreciated.
Thanks.

If you used an older version Nikon Transfer or ViewNX to download the images from your camera, it's possible that they have made them unreadable by Camera Raw or other Adobe products.

Nikon D2X NEF Raw file not recognized anymore...??

Strange happenings...
My projects which contain new and older .NEF friles from the nikon D2X are no longer readable by Aperture - What gives?
I had been able to work them before, but not now... Haven;t used AA in a few weeks so not sure if the 10.4.5 update or some other component has gotten in the way or what... All software is up to date so if anyone has any clues, please feel free to let me know!
Cheers,
G.
Quad G5 Mac OS X (10.4.5)

Even Stranger...
The problem appears to be gone...!
I loaded some new NEF test files to determine if the naming or IPTC info was potentially the problem - and it worked fine.
Then, I went to the libraries that were problematic yesterday, and I watched as unreadable grey squares, one by one, became visible and active again... Bizarre.
The machine wasn't even restarted ( it did have an overnite nap though...), the only thing that happened was that Aperture was shut down yesterday, and then reopened today, which I'm reasonably certain that I did yesterday as well.
I was going to run a permissions repair, but didn't need to, so that wasn;t it... I guess the program still has some instability that opening / closing seems to eventually address.
Solved? Not really, but working for now I guess...
Thanks for the input
Craig
Quad G5 2.5 GHz 4GB RAM Mac OS X (10.4.5)

.pdf file not opening in Illustrator CS5

All of a sudden, I cannot get ,pdf files to open in Illustrator CS5. what would cause this?
Thanks

Jeremy,
Or you may go further down the list.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
If possible/applicable, you should save curent artwork first, of course.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Edit: Hi Steve. Whatever was white is less so now.

Adobe Primiere Pro CS5 classroom in book files not opening...

I can open files from other sources but the new Adobe classroom in a book series is giving me issues:
I have a mac but the sdisk says PC/Mac.
Error message (no number here)
File import failure
File format not supported
Anyone have any ideas? thanks

First, I'm mad as heck! I pre-order my CiaB CS5 and mine has NOT come yet... ! You got yours first.
OK, let's talk about those PRPROJ files. There are two ways to use a PRPROJ file in PrPro - you can Open from the New/Open dialog, and you can use New Project to create one, and then Import the PRPROJ into that Project, where it will bring in the full Bin structure and the Timeline(s). One just needs to twirl open those Bins and then Dbl-click on the Timeline. Does this second method also fail for you?
As for the "file type" error, my first thought is that the file affinity for PRPROJ is not set correctly in your OS. I know zero about how/where this is done in the Mac OS's, so will be of no help. Second, I wonder if you have a bad installation. Can you create a New Project? Does that New Project function correctly?
One good thing about your issue is that the author of that book is a MOD here. He knows exactly what is on that DVD, and has personally tested it. Curt can very likely get you up and using the book and its assets in a hurry.
Personally, I am thinking that all CiaB CS5's are magically disabled, until Hunt gets his copy...
Good luck, and let us know about the Import Project and also how New Project works for you. Curt will be by soon too.
Hunt
[Edit] One last thought - you do have PrPro CS5 don't you? CS5 Projects will most likely NOT Open/Import into earlier versions.
Message was edited by: Bill Hunt - Added [Edit]

.nef Nikon files not opening in CS5

Similar Messages

Maybe you are looking for