Neither Intel nor AMD graphics working on HP g6

I have a HP Pavilion g6 just built a few months ago. Has integrated Sandy graphics and Radeon HD 6470M
I can get neither to work have tried a blank xorg config and tried adding radeon and intel to the devices in the xorg.conf.d folder. I keep getting the error
(EE) No devices found
only vesa works
- A thanks to all who help in advance

Not sure if you have tried this yet but https://wiki.archlinux.org/index.php/Hybrid_graphics
This walks you through how to manually fix the problem, however there is an AUR available: http://aur.archlinux.org/packages.php?ID=51704

Similar Messages

Does a laptop with Intel HD 4400 graphics work with creative cloud software, or do I NEED Nvidia or AMD?

Does a laptop with Intel HD 4400 graphics work with creative cloud software, or do I NEED to have Nvidia or AMD graphics

Creative Cloud has MANY programs Explore Adobe desktop apps | Adobe Creative Cloud so the answer is most likely going to be specific to the program
Work... yes... work WELL with something like Premiere Pro... no

X200s tried to add webcam - now neither webcam, nor thinklight will work

Hi all,
So, as the username hopefully indicates - a newbie to the x200s, which I bought recently, though I've been using thinkpad products for a few years now (a devoted fan!)
My x200s did not come with a webcam and, since I am thousands of miles from home, I reckoned I would try and install one manually. Note that I have swaped its HDD for an SD & changed keyboard in the past with no problem, so I was assuming (foolishly, perhaps!) that vaguely knew what I was doing.
I followed the instructions and user experiences on this thread, I purchased this camera - and got off to work.
Even though everything seemed fine when adding the camera to the system, a strange thing happened after I rebooted (I run Linux Mint 16): neither the webcam, nor the thinklight were now working. After lots of testing, I assumed I must have just destroyed part of the cable during installation, and so I purchased this cable (Lenovo ThinkPad X200 LCD Video Cable 44C9909) and tried again. Same result! The only difference is that the first time round, an "lsusb" command on linux would return a Ricoh product (and I assume that's the webcam), but it would still not be recognised by Mint, while now, there's nothing. In both cases, the Thinklight didn't work.
Since both the thinklight and the webcam come out at the same end (see the right end of the cable on this picture) I am assuming, of course, that the two are related.
Would anyone know which of the clips on the left end of the cable on the same picture, above, correspond to the webcam and the thinklight?
Thanks for reading, and any response and thoughts on the above would be most appreciated - a little bit at loss at to what to do now.

Hi,
perhaps HMM and Service Video might help.
Be sure integrated camera is enabled in the BIOS Setup menu.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

[SOLVED] Neither wireless nor wired internet working

Hello everyone, I've installed Arch Linux on my Toshiba L645D-S4056. I installed it from the Core CD, as my adapters aren't working. As of now without internet access you can't do much, so here I am. Here is the output of lspci:
lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] RS880 Host Bridge
00:01.0 PCI bridge: Toshiba America Info Systems Device 9602
00:04.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 0)
00:06.0 PCI bridge: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge (rev 40)
00:15.0 PCI bridge: ATI Technologies Inc Device 43a0
00:16.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc M880G [Mobility Radeon HD 4200]
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
08:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1)
Thanks in advance, and I am posting this in Ubuntu, so I'm not sure how I am going to be able to copy and paste other commands from my Arch install.
Last edited by DasBoot (2011-05-17 01:40:49)

Meskarune wrote:
The lines that are more relevant to you are
02:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
08:00.0 Ethernet controller: Atheros Communications AR8152 v1.1 Fast Ethernet (rev c1)
you need to install the realtek and artheros drives for your computer. You can do this from your ubuntu install by chroot into arch, or by copying the files you need to your arch install and doing pacman -U
see this thread: https://bbs.archlinux.org/viewtopic.php?id=46583
packages in aur: https://aur.archlinux.org/packages.php? … _Search=Go
I would suggest chrooting though, that is what I did to get networking working on arch. Often it will work out of box after updating everything.
how to chroot:
mkdir /mnt/arch
mount /dev/<device-or-partition-name> /mnt/arch
cd /mnt/arch
mount -t proc proc /arch/proc
mount -t sysfs sys /arch/sys
mount -o bind /dev /arch/dev
if you have other partitions for boot, home, etc mount those also.
example
mount /dev/<device-or-partition-name of boot> /mnt/arch/boot/
then
chroot . /bin/bash
you should be logged into the arch system in the terminal in ubuntu. You can then run pacman -Syu
please see: https://wiki.archlinux.org/index.php/Change_Root
Alright so I've successfully chrooted into my Arch install, however it appears my network is still being undetected:
[root@Blitzkrieg /]# pacman -Syu
:: Synchronizing package databases...
error: failed retrieving file 'core.db.tar.gz' from mirrors.kernel.org : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirrors.kernel.org : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirror.cs.vt.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirror.cs.vt.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirrors.easynews.com : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirrors.easynews.com : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirrors.gigenet.com : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from ftp.gtlib.gatech.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from www.gtlib.gatech.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirrors.hosef.org : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirrors.hosef.org : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from ibiblio.org : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from distro.ibiblio.org : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from archlinux.linuxfreedom.com : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from locke.suu.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from lug.mtu.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from lug.mtu.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirrors.xmission.com : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirrors.xmission.com : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirror.rit.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirror.rit.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from schlunix.org : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from archlinux.umflint.edu : Transient resolver failure
error: failed retrieving file 'core.db.tar.gz' from mirror.umoss.org : Transient resolver failure
error: failed to update core (Transient resolver failure)
error: failed retrieving file 'extra.db.tar.gz' from mirrors.kernel.org : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirrors.kernel.org : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirror.cs.vt.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirror.cs.vt.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirrors.easynews.com : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirrors.easynews.com : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from ftp.archlinux.org : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirrors.gigenet.com : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from ftp.gtlib.gatech.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from www.gtlib.gatech.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirrors.hosef.org : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirrors.hosef.org : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from ibiblio.org : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from distro.ibiblio.org : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from archlinux.linuxfreedom.com : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from locke.suu.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from lug.mtu.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from lug.mtu.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirrors.xmission.com : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirrors.xmission.com : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirror.rit.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirror.rit.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from schlunix.org : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from archlinux.umflint.edu : Transient resolver failure
error: failed retrieving file 'extra.db.tar.gz' from mirror.umoss.org : Transient resolver failure
error: failed to update extra (Transient resolver failure)
error: failed retrieving file 'community.db.tar.gz' from mirrors.kernel.org : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirrors.kernel.org : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirror.cs.vt.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirror.cs.vt.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirrors.easynews.com : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirrors.easynews.com : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from ftp.archlinux.org : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirrors.gigenet.com : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from ftp.gtlib.gatech.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from www.gtlib.gatech.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirrors.hosef.org : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirrors.hosef.org : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from ibiblio.org : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from distro.ibiblio.org : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from archlinux.linuxfreedom.com : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from locke.suu.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from lug.mtu.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from lug.mtu.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirrors.xmission.com : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirrors.xmission.com : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirror.rit.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirror.rit.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from schlunix.org : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from archlinux.umflint.edu : Transient resolver failure
error: failed retrieving file 'community.db.tar.gz' from mirror.umoss.org : Transient resolver failure
error: failed to update community (Transient resolver failure)
error: failed to synchronize any databases
[root@Blitzkrieg /]#
Uncommenting all the servers didn't appear to work, so I again assume it has to do with my internet still being undetected.
My network part of rc.conf:
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="arch"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(eth0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d

Why are my Contacts NOT in alpha order (neither First nor Last order works)?

It doesn't matter what order I specify in Preferences, the Contacts are not in alphabetical order. This is crazy! What am I doing wrong?
It has to be something very simple and it's right in front of me, but I just can't see what the problem is.
Thanks.
Matt

It could be that you have spurious characters in the filenames? When you do a Manual sort a hidden file is created in the folder you are working in .BridgeSort this is just a text file with the list/order of the files. It might be worth having a look at the file and see if anything strange is happening.

Neither JMX nor JNDI seems working with OEP 12.1.3 (regression ?)

Hi,
I'm currently writing an OEP application, on the 12.1.3 version.
My first problem is related to JMX: when OEP is started, I cannot connect in JMX:
I lanch "OEP_HOME/oep/bin/wlevsjconsole.cmd"
I use the following URL "service:jmx:msarmi://localhost:9002/jndi/jmxconnector" with user "wlevs" and my pwd
Impossible to connect...
My second problem is related to JNDI resource access:
I add an "data-source" with its "data-source-params/jndi-names/element" in the OEP domain's config.xml file
I start my OEP (with or without security disbaled, it doesn't change nothing)
I try to access programmatically the JNDI resource (using the InitialContext lookup method with no prefix, with "java:comp/env/jdbc/", with "java:jdbc/, with "jdbc/") but I always get a NameNotFoundException.
I try to list programmatically the JNDI resources using the list("") but I get a NoPermissionException.
I'm not 100% sure, but it seems to me that these things were working with the 11 version of OEP. Could these be regressions ?
Thx for any help or advice on this.
RP

After a reboot of node 2 everything returned to work fine.

Neither FaceTime nor iMessage will work.

When I got my Apple iPod Touch 4G on Dec. 30th I was able to FaceTime and iMessage perfectly fine. It has been working until today. When I go on either one it shows the Get Started page. I hit get started and it takes me to the Apple ID page. I type in my password and it takes me to the E-Mail adress selection page. Then it sends me back after about 1.5 seconds. If I hit Next it immediantly sends me back. I have tried quitting them and turning off the iPod, but to no avail. What do I do?

Fixed it! I couldn't find any other people with this problem before, but after looking at some other threads in the more like this pane I found the answer - I just had to turn the "Set Automatically" option on in Settings! Who knew!

Neither Wifi nor Bluetooth is working After upgrading to iOS 8 even after reset all settings including network setting.

i to upgraded my 4s to ios8 & now both wifi as well as Bluetooth options are greyed out & so I can't use it as personnel hotspot. I have reset all settings including network setting but it doesn't work.

Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario

I cannot ope PDF files that are within a web link. Neither Safari nor Firefox will work. If I receive a PDF file as an email attachment, I can open it with either Adobe or Preview. I'm running 10.6.8 on an iMac.

I'm going to re-state this. Several weeks ago, I had installed Security Update 2012-004 on my iMac. I'm running Snow Leopard 10.6.8. Immediately afterwards, my Mail 4.6 was GONE. Mail 4.2 was there, but the system would not open it. The Apple Support Communites quickly solved my problem. The problem lay within the Update. Now, I cannot open PDF files that are contained within a website, i.e. a lunch menu that is on a restaurant website. This happens on both Safari and Firefox. If someone sends me an email with an attached PDF file, I can open the file with either Adobe or Preview. This is happening only on my iMac. My MacBook Pro, also running Snow Leopard 10.6.8 has not experienced either the first or second problem. Thanks for any help you can offer.

fomamac2guy wrote:
Now, I cannot open PDF files that are contained within a website, i.e. a lunch menu that is on a restaurant website.
Does this help with Firefox?

AMD graphic card not working

Hello,
first sorry for my english,
second here are my specifications:
Intel i5 2430m 2,4 GHz
8 GB RAM
SSD Samsung 850 EVO 250 GB and HDD Seagate 750 GB
AMD Radeon hd 6490m
Here is the problem:
two weeks ago i bought new ssd Samsung 850 EVO and HDD caddy. I switched original hdd to caddy and ssd to the place where hdd was before. I installed windows 7 Ultimate 64 bit to ssd, i istalled the latest drivers, but i have problems with AMD graphic driver.
When i start, for exp. Battlefield 3, windows crash and i get blue screen with note, that i have low IOH (NB) voltage (code 0x116). But when i uninstall driver for AMD and run the game on Intel HD 3000 graphic it runs perfectly.
Is it posible, that extra disc need power for working and use the power, which is used for AMD graphic card and that causes AMD for not working?
Sometimes i dont get blue screen, but i get note from windows: AMD driver stopped working and has been recovered Now i am using only intel graphics
Greets

Hi: See if this one works...it has a different file number and is from the dv4-3200tx which has basically the same hardware as yours does. This package provides the AMD High-Definition (HD) Graphics Driver and Catalyst Control Center for supported notebook models that are running a supported operating system. For notebooks with switchable graphics modes, this package includes drivers for both graphics processing units (GPUs). Switchable graphics enable users to switch between a power-saving graphics mode (normally used under battery power) and a high-performance graphics mode. If high-definition multimedia interface (HDMI) video output is supported, this package also installs the HDMI Audio Driver. File name: sp52929.exe

Hp dv6 3050ee AMD mobility radeon hd 5000 (5650) series and intel(r) HD Graphics draver

У меня - HP dv6 3050ee, видео - Mobility Radeon AMD HD 5000 (5650) серии и Intel (R) HD Graphics Draver, пытаюсь установить драйвера для Windows 8.1 (! Их нету)
Но как только автоматически устанавливаются драйвера, начинает перегружаться компьютер! Сейчас я работаю с отключенными видеокартами, в другом случаи начинается перезагрузка компьютера, подскажите что можно сдлеать? Сейчас у меня полностью отключена и удалена - AMD Mobility Radeon HD 5000 (5650) серии, а Intel (R) HD Graphics Draver - работает без драйверов ((( .
Большое спасибо за помощь.
I - HP dv6 3050ee, video - Mobility Radeon AMD HD 5000 (5650) series and Intel (R) HD Graphics Draver, try to install the drivers for Windows 8.1 (! They do not have )
But as soon as the drivers are automatically installed , the computer begins to reboot ! I am currently working with disabled graphics cards , in other cases begins to restart your computer , you can tell me what sdleat ? Now I have completely disabled and removed - AMD Mobility Radeon HD 5000 (5650) series and Intel (R) HD Graphics Draver - works without drivers (((.
Thanks a lot for the help.

Hi @Jiko ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion dv6-3050ee Notebook and issue with Graphic drivers for Windows 8.1. You system shows me that the drivers are only available for Windows 7 on this machine. Updating to Windows 8.1 would rely on Windows 8 drivers only and you would lose some of the enhanced effects on this Notebook.
No, you can not use the Notebook without drivers installed.
Have you tried to just update the drivers in the Device manager on Windows 8.1?
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Amd graphic nt working

am having hp g6 2016 tx , i5 3 rd gen came with windows 7 home basic 64 bit , and amd 1 gb dedicated graphic card,
few days back i upgraded to windows 8 due to which my driver of amd doest work , and a blue screen ocour with eror, atempt to reset dislay driver timed out, technical report atikmpag.sys,
i thought i should reboot my pc so i did it throught recovery media bt their was a recovery atempt failed due toh driver failed to instal on amd hardware, then i thought might b media problem i purchased new media bt stil same problem at the end when instaling of drivers proces run a blue screen ocour of same eror mentioned and recovery fails i cant boot my pc
wel on the trial version of windows 7 64 bit, i tried to instal drivers , all drivers sucessfuly installed in last i installed amd graphics driver , i sucessed and asked for restart i did yes, then a block at botom comes with a msg that display driver stopped responding and screen turned black then a bsod apper with same eror as i stated above that atempt to reset display driver timed out ,
atikmpag.sys,
then in safe mode i taken all my dada in external hard drive , and then tried again to boot pc through recovery media purchased by me frm hp,
changing date to 1/01/2014 bt stil nt worked,
same condition last at the time of drivers instalation it comes blue screen with eror atikmpag.sys,
this clears thats my graphic device nt working after instalation of drivers,
now tel me what to do,
is it able to repair or any else i could do

Hey @anshuman2 ,
Welcome to the HP Forums!
I understand you're experiencing issues with the GPU drivers after updating to Windows 8 on your g6 notebook.
Please try installing the Windows 8 AMD/Intel Switchable graphics drivers for your notebook using the following download: AMD High-Definition (HD) Graphics Driver.
Let me know if this works.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Unable to load youtube videos. Neither browsing nor the youtube app are working, this hapenned after I updated to iOS6

Unable to load youtube videos. Neither browsing nor the youtube app are working, the video start loading but nothing more happen. This issue is hapenning after I updated to iOS 6.

Try this first.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
And then try this.
Go to Settings>Safari>Clear History, Cookies and Data. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
And ... Are you using the mobile YouTube website?
http://m.youtube.com/home

While my iPod touch was connected to a speaker dock, I found it very hot. Not it will not turn on. I have tried the reset options and they do not work. Neither iTunes nor any of my computers recognizes it when I plug in the usb. Is there a way to fix?

Now it will not turn on. I have tried all the reset instructions with no luck. Neither iTunes nor any of my computers will recognize it when I plug it in. Is there any chance to get it working or am I out of luck? Please help if you can since I cannot afford to purchase a new one at this time. Thanks.

Your iPhone is in recoverty mode at the moment so to possibly get it back up and running you would need to do a restore as you have been trying. Follow the steps in the article below for the specific error messages you have been receiving. If after following all steps the issue remains book an appointment at a local Apple Retail Store to have the iPhone evaluated.
Resolve specific iTunes update and restore errors

Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

Yes....It happens all the time. I also erased my HD and installed Snow Leopard but with no success. Tried lots of REBOOTING but nothing worked for me.As I have already installed the new OSX I think there is no need to go through the below procedure. What do you suggest?
Before you go through the ritual of reinstalling the entire system just try to do a "factory reset" of your bluetooth environment. To do this you need to run the Bluetooth Explorer which is a utility installed as part of XCode.
1. Launch Bluetooth Explorer.
2. Select the "Modify Software & Device Configuration" from the Utilities menu.
3. Keep the first 4 checkboxes checked (one will say "Full factory reset").
4. Click "Perform actions" button (lower right of window).
5. Reboot (possibly the Reboot NOW button will work, if not just do a normal reboot).
Hopefully that will clear your problem(s) so you can re-pair your bluetooth devices.
Good luck.

Neither Intel nor AMD graphics working on HP g6

Similar Messages

Maybe you are looking for