Neither MP Navigator Ex nor Image Capture work with OS 10.7.3. Why?

I just bought a new Mac Book Pro, and can't get MP Navigator Ex or Image Capture to work. 
I have a Canon Pixma MX 340, so I downloaded the 3.1 MP Navigator verions that was reccomended to replace the MP Navigator that was on my computer also 3.1).  The download page said that the version I was downloading was specifically for Canon MX 340 with os 10.7/ but when I try to open the application the notice comes up saying it can't be started (even though my printer is one of the printers on the list that 3.1 should work with).
As for Image Capture, it tells me it can't detect my printer/scanner.  I am connected with a USB cable .  I have no trouble printing files with my new macbook pro, and the scanner part of the printer still works with well with my old macbook.  So I know that the scanner is still funtional.
So between the two, I have no way of scanning with my new macbook pro.  Can anyone offer any solutions?
Thanks
Clayton

With Image Capture not seeing the MX340 when connected to the Mac via USB cable then in many cases the cause would be the USB cable. If this same USB cable is the one you use with the old Macbook, then it would rule out the cable. And with you being able to print via USB from the new MacBook Pro, this would also rule out the USB cable. But for the cost of a new USB printer cable, it would still be worth getting one just to be sure.
As for MP Navigator, this uses a different scanner driver to that used by Image Capture. So the first thing to ensure is that you have the full scanner driver installed. With the full scanner driver installed, this should allow you to open MP Navigator and commence scanning.

Similar Messages

  • When will Image Capture work with my Nikon D90?

    Hi,
    I'm just interesting in seeing some concrete info on when Image Capture will work with my Nikon D90 camera. Lightroom 3 is having problems, but that's probably because the image capture firmware is not working in OSX Lion yet.
    Regards,

    Image Capture in LIon is version 6.1 which is an update from the 6.0 in Snow Leopard. Contact the vendors and see when they will have updates compatible to Lion.

  • Why doesn't Image Capture work with document feeders?

    I've tried to scan a bunch of different types of documents using Image Capture and my Samsung CLX-3175FW's document feeder (multifunction color laser printer) but every time what gets scanned is a thin vertical slice of each page - completely useless. I don't see any way to force Image Capture to scan at 8.5" x 11" rather than doing whatever it's doing resulting in a thin vertical slice.
    Any ideas on how to fix this?
    Thanks!

    Quick update... I've done some troubleshooting and confirmed that when Image Capture scanning via USB and using the document feeder, everything looks great. When the ONLY option I change is printing via wireless, I get the thin vertical slice of each page. I sent some screenshots to Samsung to see if they have any ideas.

  • How does Image Capture work

    I've lost my 9.2 iphoto because of OSX Mavericks needing 9.5 version of iphoto.  I had to deinstall OSX Mavericks and reinstall Mountain Lion 10.8.5.  With no old versiion of iphoto available I'm trying to gain the knowledge of how Image Capture works.
    Any input would be appreciated, thanks!

    Image Capture is described in http://support.apple.com/kb/HT4505

  • Since I upgrade my Iphone 4S to iOS 6 neither my home wireless nor my email works

    Since I upgrade my Iphone 4S to iOS 6 neither my home wireless nor my email works.  MY data charges are going through the roof (Its so expensive here in NZ) I have spent time with my mobile provider, and time with my home wireless provider,and some time I got rthrought o an Appple help desk in Colorado.  Nothing helps!  Does anyone have any idea when these faults (And other onviously glitches with iOS 6) will be fixed?

    ClareNZ wrote:
    I have an old D-Link 804T router,
    This may have something to do with your problem. Check the manufacturer's website to see if there is a firmware update for the router.

  • Image capture broken with LiDE 25

    We just received out new 27" i7 iMac. I am having problems getting it to play nice with a CanoScan LiDE 25 USB scanner. This is a cheap scanner, but my wife uses it constantly with Evernote.
    Canon has a 10.6 compatible driver on their website which I have installed.
    Image capture can see the LiDE 25, but the scans are ignoring the dpi and size settings in image capture, all the scans are extremely small and low resolution totally unusable.
    The driver is fine as the scanner works great with the demo version of Vuescan, but I really don't want to spend $40 on scanning software when it should work in image scan, also it breaks my wife's work flow of scanning directly in to Evernote or Photoshop from Image Capture.
    How can I make Image Capture work correctly? I can't find any settings or preferences for it.

    Thank you for the response, knowing you have it working under 10.6 really helps.
    I have been doing some more testing this morning.
    It is responding to size and dpi settings, only it is not scanning to those settings. It is scanning to 1/4 size of the requested size in the settings:
    For example:
    I ask for a 150dpi 8 inch x 8 inch scan... I get a 150 dpi 2" x 2" scan.
    I ask for a 300 dpi 10 inch x 10 inch scan... I get a 300 dpi 2.5" x 2.5" scan.
    The solution is to scan at 4x the dpi you require, then alter the image size in photoshop without resampling. This is of course a work-round, but we can proceed now until an official fix comes from Apple.
    I'm pretty sure the error is in Image Capture, as 3rd part software (Vuescan demo) works just fine and as expected. I'm not going to buy a $40 piece of scanning software to run a $40 scanner!

  • HT201343 My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why  ?

    My Mac book pro all of a sudden doesn't have the airplay icon and doesn't work with my Apple TV . Why  ?

    The Airplay icon will not display if the OS is unable to locate any Airplay devices.
    I would check that both devices are connected to the same network and maybe even power cycle the network devices - eg router etc
    Maybe even try to connect both devices to another network like an iPhone personal Hotspot and see if that helps to isolate the problem

  • HT1222 Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

    Hello,after the last apdate iOS 7.1.1 my iphone has stop work with the bose dock station. why it is happens?

    Natan turbo hadar,
    I have the same exact problem.
    I put an iPod shuffle on the Bose system, it plays just fine.
    My iPhone 4s works just fine connected to my car stereo.
    My iPhone 4s on the Bose will charge, it "thinks" it's playing, song shows, time line shows it's playing, can pause if I touch the phone's screen.
    The remote for the Bose WILL NOT pause it, forward to next song, etc. It does work with the iPod shuffle.
    So it's not the Bose, it's not connections, it's the iOS 7.1.1
    Everything worked fine before, any one else have suggestions?

  • Does Wireless Image Capture work???

    Hi,
    I today tried around to get Image Capture in Tiger working with my Sony Ericsson S700i over bluetooth. However Image Capture does not recognize any picture on there. I also tried the same with the Sony Ericsson K700i of my girlfriend.
    Is there anybody out here who uses Image Capture to download photos/videos/sounds from his/her mobile over bluetooth?
    Apple doesn't even provide a list of supported phones - if you ask them, they can't give you any further information. However it seems to be one of the 200+ new features in Tiger, well on of the less working...
    (http://www.apple.com/macosx/features/imagecapture/)
    Please tell me your experience with this tool using it for connecting to wireless cameras and camera-phones. I would love to get it work here!
    Regards, Canubis

    Image Capture is described in http://support.apple.com/kb/HT4505

  • Neither JMX nor JNDI seems working with OEP 12.1.3 (regression ?)

    Hi,
    I'm currently writing an OEP application, on the 12.1.3 version.
    My first problem is related to JMX: when OEP is started, I cannot connect in JMX:
    I lanch "OEP_HOME/oep/bin/wlevsjconsole.cmd"
    I use the following URL "service:jmx:msarmi://localhost:9002/jndi/jmxconnector" with user "wlevs" and my pwd
    Impossible to connect...
    My second problem is related to JNDI resource access:
    I add an "data-source" with its "data-source-params/jndi-names/element" in the OEP domain's config.xml file
    I start my OEP (with or without security disbaled, it doesn't change nothing)
    I try to access programmatically the JNDI resource (using the InitialContext lookup method with no prefix, with "java:comp/env/jdbc/", with "java:jdbc/, with "jdbc/") but I always get a NameNotFoundException.
    I try to list programmatically the JNDI resources using the list("") but I get a NoPermissionException.
    I'm not 100% sure, but it seems to me that these things were working with the 11 version of OEP. Could these be regressions ?
    Thx for any help or advice on this.
    RP

    After a reboot of node 2 everything returned to work fine.

  • Image Capture Problems with Snow Leopard

    Somewhere along the line I seem to have upgraded my version of image capture. I've recently installed snow leopard and any software updates that have followed. I tried to use image capture for the first time yesterday, and after struggling to get it to work (unsuccessfully) I decided I preferred the previous version and went ahead and restored it from my time machine drive in place of the new version.
    I soon realised that this wouldn't work with the updated OS, and upon trying to restore the newer version of IC realised that I didn't have a copy of it on my time machine drive. I know this is a rookie error!
    Can anyone tell me where the new version of IC has come in, and if I can download it as part of a software update etc? I've tried reinstalling parts of Snow Leopard from disc hoping it would be in there, but so far I've had no success.
    Thanks in advance.

    Having the same issue since 10.6.4; none of my 3 scanners work: canon LIDE 60, Epson CX5000 or HP 4215.
    The Epson gets the furthest with a partially garbled 'overview' scan which never completes... the others never even start scanning although Image Capture says it is making an overview.
    I have already installed the updated Epson driver, but not the others... will go hunting, but this really *****. Need to scan and distribute 3 1-page documents and it has so far taken me 3 hours.

  • IDVD nor iMovie Is Working with ArcSoft Showtime Software

    I used ArcSoft's Showtime to burn dvds from my vhs tapes. The copies are in .vob file format and neither iMac program will work with these movie discs which I can play in my home dvd. What must I do to have iMac software work with my dvds in .vob? Any help will be greatly appreciated! Bill

    If these don't answer your questions just come on back:
    http://discussions.apple.com/thread.jspa?messageID=6397522&#6397522
    http://discussions.apple.com/thread.jspa?messageID=6773923&#6773923
    http://discussions.apple.com/thread.jspa?messageID=6138992&#6138992
    http://discussions.apple.com/thread.jspa?messageID=5738977&#5738977
    http://www.apple.com/support/appletv/
    Btw .... if you have the finished DVD (assuming it is not copy protected) and it also has a video_ts foder then you might be able to use an app like:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.products.htm
    in order to convert the files to a format (QT) that i-apps can read (you may see some loss in quality as a result).
    Message was edited by: SDMacuser

  • Crop a background image (movie) - working with a template

    I'm working with the template "Promo > Product Shot". The image block with the bike is what I want to replace with my own video clip.
    I can't figure out how to replace it, so I took the video clip and "placed" it. That's all fine, but now I want the size of the video clip to match the size of the bike block. I can scale it down to get close but then I'd have to crop the sides to get the vertical block shape.
    Can't figure out how to do this either. Is it even possible?
    Thank you very much,
    Eric P

    Thank you for the speedy reply.
    I played with that tab a little but didn't understand exactly what it was so I never followed through with it.
    I did follow your steps, but nothing happened. Perhaps there is something I have to do after selecting the movie?
    Thank you,
    Eric

  • Problem when displaying images when working  with PHP, mysql and dreamweaver in a brower

    Hey Guys
    I am new to dynamic development but I already did some
    research and tutorials about how to get a dynamic web site working
    with PHP and Mysql in Dreamweaver. I set up a test page to view
    some content on it directly from the mysql database and it worked
    just fine in dreamweaver only when I pressed the
    live data view.
    When I tried to view the same page using the browser preview
    with firefox and internet explorer, plain text from the database
    was correctly displayed on the brower but the images were absent.
    In the mysql database I used the varchar as my picture data
    type field so that I will refer in dreamweaver in the data binding
    panel in the img.src to the picture column of my database.
    I anyone can tell me what am I doing wrong so that my
    pictures are not displayed in the browser when i click the browser
    preview facility in dreamweaver I would be very very and very
    pleased ! :)

    The odds are that it is the way that you have referenced the
    images rather
    than an issue with the database. If you have the images root
    relative like
    this "/images" then they will work in preview, and on the
    webserver, but
    will not view when looking at the file via localhost.
    If possible make the links page relative and then they should
    work fine.
    Paul Whitham
    Certified Dreamweaver MX2004 Professional
    Adobe Community Expert - Dreamweaver
    Valleybiz Internet Design
    www.valleybiz.net
    "mariosal026" <[email protected]> wrote in
    message
    news:ea3nq2$9ol$[email protected]..
    > Hey Guys
    >
    > I am new to dynamic development but I already did some
    research and
    > tutorials
    > about how to get a dynamic web site working with PHP and
    Mysql in
    > Dreamweaver.
    > I set up a test page to view some content on it directly
    from the mysql
    > database and it worked just fine in dreamweaver only
    when I pressed the
    >
    live
    > data view.
    >
    > When I tried to view the same page using the browser
    preview with firefox
    > and
    > internet explorer, plain text from the database was
    correctly displayed on
    > the
    > brower but the images were absent.
    >
    > In the mysql database I used the varchar as my picture
    data type field so
    > that
    > I will refer in dreamweaver in the data binding panel in
    the img.src to
    > the
    > picture column of my database.
    >
    > I anyone can tell me what am I doing wrong so that my
    pictures are not
    > displayed in the browser when i click the browser
    preview facility in
    > dreamweaver I would be very very and very pleased ! :)
    >

  • Image Capture problems with my MacBook

    When i plug in my camera macbook three different icons show up with it in finder and two different icons show up with it in image capture. my problem is that none of my pictures will show in my image capture. ive never had a problem with this before. please help

    when i plug my camer into my macbook*

Maybe you are looking for

  • MSS BW error:  My Controlling Area (SAP Exit, CO Pers.) (*)

    Hello, We're starting to set up MSS My Budget.  When I try to run a BW cost center report from within My Budget, I get an error indicating that the application can't determine a value for "My Controlling Area".  Please advise how I can fix this.  Aut

  • Older  USB Cable vs. new

    So my ipod touch won't charge or sync if I use the old USB cable from previously bought iPods or chargers. Is this a problem with my iPod or are the new iPods not compatible with the older USB cables and chargers?

  • Maintain assignments of authorization objects for Z Webdynpros in SU24

    Hello experts, When we display the assignments of authorization objects for External Services -   Webdynpros in transaction SU24,  Z_webdynpros are not shown in the screen. We need to add more webdynpros in that table. I suposse that there must exist

  • Cisco AIR-SAP2602I

    I'm trying to deploy a WiFi solution for a client. It would consist of 2 SSIDs; one for internal users with internal network access and a guest with only internal access. I have a Sonicwall TZ215: External IP: x.x.x.x LAN IP: 192.168.1.1/24 DHCP Serv

  • Trying to get clean title transitions with CS5

    Hi -I have lot's of trouble trying to get a consistent, clean transition in CS5. Mulple systems, multple configs but here is an example of the latest. HP Z800 Quadro FX 5800 12 GB RAM 2 x 6core XEON (X5680) Atto R380 RAID controller CalDigit HDOne St