Neither of my apple tv's will load the watchabc-watchdisney apps.

I have Centurylink.  An actiontec pk5000 modem.  Neither of my Apple tv's will load the abc or disney apps.  They sit on the Accessing Abc screen.  When I run the atv off of my iphone lte, it loads right up.  I have reset, restored and all that jazz.

Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Apple terms if service
(i) You may auto-download iTunes Auto-Delivery Content or download previously-purchased iTunes Eligible Content from an Account on up to 10 Associated Devices, provided no more than 5 are iTunes-authorized computers.
An Apple TV is not an “Associated Device.” However, purchased (i.e. not rented) movies iTunes Products and TV show iTunes Products may be played back on compatible Apple TVs, provided that you may only play back any such movie or TV show on a limited number of Apple TVs at the same time.
Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Yes it looks like you can have an unlimited number of Apple TV on the same account.
Did you ever find out what the limit was that could play back at the same time.
It doesn't say in the website.

Similar Messages

  • I go to play on a game on my iPad it will load the game up and a minute later will go to a blank screen and then back to all my apps.does it everybtime? Why is that? What do I need to do to stop it?

    I go to play on a game on my iPad it will load the game up and a minute later will go to a blank screen and then back to all my apps.does it everybtime? Why is that? What do I need to do to stop it?

    1. Close all inactive apps in the Task Bar. Double-click the Home button and hold apps down for a second or two and tap the minus sign to close app.
    2. Try a reset. Hold the Sleep and Home button down for about 10 seconds until you see the Apple Logo

  • I got charged twice for a movie (Safe House).  Can i get a refund for that?  we were not able to finish the movie and now were trying to watch it again.  We have an hour left, however the apple tv is still loading the movie again for 2 hrs

    i got charged twice for a movie (Safe House).  Can i get a refund for that?  we were not able to finish the movie last night, and now we're trying to watch it again.  We have an hour left, however the apple tv is still loading the movie again for 2 hrs & 46 mins.

    Welcome to the Apple Community.
    Apple's policy on sales of digital content is that all sales are final. If however you wish to appeal to Apple, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History.

  • In elements 12, when I click a photo in Window Explorer, it will load the elements 12 editor, but it doesn't load the pic ( *.jpg ) into the editor? It always did in earlier versations?

    in elements 12, when I click a photo in Window Explorer, it will load the elements 12 editor, but it doesn't load the pic ( *.jpg ) into the editor? It always did in earlier versations?

    green
    When you click on the Playclaw's Encoder tab, what do you see in the next dialog for Video Compression when the Container field in that dialog is set to .avi?
    Since you are seeing some video at all in Premiere Elements (glitchy as it is), I am assuming the video compression is not AVCHD. If that were the case, I would expect you not to be able to import the file at all. By any chance is the video compression Xvid or DivX?
    It appears that Video compression could also be "H.264 Intel QuickSync" with a mkv file extension. That seems ruled out since you say your file extension is .avi and not mkv.
    So, with the .avi file extension
    what is listed as Video Compression and what have you done, if anything, under the Encoder Setup button?
    Do you have the same issues with and without the antivirus and firewall(s) disabled?
    Also, if you took footage that worked before in Premiere Elements back into today's Premiere Elements, problems or no problems?
    At this time, can you import a bunch of jpg photos into a project and work without this type of issue?
    Thanks.
    ATR

  • If the data is not available in R/3 systems(Ex: MM), who will load the data

    Hi All,
    Can anybody tell me that if the data is not available in R/3 systems(Ex: MM), who will load the data into that?
    Need Helpful Answers....
    Regards,
    Kiran Telkar

    Hi kiran,
    The data is generated in the R/3 when the business transactions take place.
    No one loads the data into R/3 as it done with BW. R/3 is a OLTP(online transactional processing) system which aides the day to day transactions of a business & theese transactions are stored in the R/3 in there respective tables in the form of records, so one record is generated for each transaction done.
    For example there will be record generated in different modules when there is an order placed or when a material is delivered against an order.
    Hope this helps,
    regards.

  • I want to make a grid. Apple said Pages will do the job. I need to change the grid to 1 in. x 1 1/2 in. squares. What tutorial can I use to show me how to do this?

    I want to make a grid. Apple said Pages will do the job. I need to change the grid to 1 in. x 1 1/2 in. squares. What tutorial can I use to show me how to do this?

    A calendar is not difficult nor does it take long once you know where the dates fall.
    Start with a basic month template table.
    1. Click on the table icon on the Toolbar to create a basic table for one month
    2. Click on the resultant table > Inspector > Table > Headers & Footers > 2nd button > 1
    3. Inspector > Table > Body Rows: 6 > Body Columns: 7
    4. Inspector > Metrics > Size > Width: 7 cm/in > Height: 7 cm/in
    You can drag resize the whole month to your liking afterwards
    5. Select the entire header row > Inspector > Table > Edit Rows & Columns > Merge Cells > Type in a month
    6. Type Mon in first cell & Tue in 2nd cell of of 2nd row > Select both cells and drag the white dot in the bottom right corner sideways to fill the cells with the days
    7. Do the same with the dates in the cells below
    8. You can fill the spare dates at the beginning and end of the month if you like and maybe change them to a paler grey.
    9. Style and position the text as you like it.
    10. If you don't want to see the grid or want different strokes, colors etc:
    Inspector > Table > Cell Borders/Cell Backgrounds etc
    When you have the first month looking the way you want, option drag out copies sideways to make the rest of the months.
    Peter

  • We have bought an Apple TV, and have downloaded the sky sports app. We are trying to watch this via airplay, but we are only managing to get the sound, not the picture. Any ideas??

    We have bought an Apple TV, and have downloaded the sky sports app. We are trying to watch this via airplay, but we are only managing to get the sound, not the picture. Any ideas??

    Sky do not allow the app to work with Airplay.You will only get sound.

  • Trying to load the new iphone app wont let me past the rescue email page ??

    trying to load the new iphone app wont let me past the rescue email page

    do you use the Google 2-step verification? If so, you need to generate a specific password for that to login.
    http://www.google.com/support/accounts/bin/static.py?page=guide.cs&guide=1056283 &topic=1056284

  • HT202157 Is apple ever going to put the tv channel apps on the apples tv?

    Is Apple ever going to put the TV channel Apps on Apple TV?
    I can get them on my phone and ond my ipad, but not on Apple TV. Why?

    Welcome to the Apple Community.
    This is a user to user community, Apple are unlikely to read your comments, if you have any suggestions that you think might enhance the Apple TV you can send Apple your feedback here 

  • MacBook pro will not boot. I get the gray screen, an apple icon and spinning wheel. Tried to start in safe mode but get the same screen. The only thing different was that I loaded the zedge sync app yesterday. Now getting this problem.

    Macbook pro will not boot. I get the gray screen, an apple icon and spinning wheel. I tried to start in safe mode, but get this same screen. The only thing different is that I added the zedge update app to do a sync for adding ringtones to my apple cell phone. How can I get a good boot. I am fairly new to apple computer.

    Reset PRAM: http://support.apple.com/kb/PH4405 and then try a normal boot.
    Run the Startup Manager to select Startup disk:  http://support.apple.com/kb/HT1310
    If those did not work your disk may be sick or dying.  The top priority at this point is to make a backup copy of your data.
    Check the health of the disk.  Boot in Recovery Mode (Boot, Command-R).  Run Disk Utility.  Click on the upper left disk icon.  Does the S.M.A.R.T. status say “Verified”?  If not the disk/SSD is unhealthy and needs to be replaced.  Even if it does not show “Verified” you can still attempt a backup. 
    Click on the icon indented below, usually called “Macintosh HD” and Verify Disk.  If it finishes with a green “OK” message then all is well with the disk.  If it shows errors in red then you have found a problem to address once the system is backed up.  Do not attempt software repairs until you have secured the data.
    If the disk will not show up at all in Disk Utility as your ran the tests above then it may be dead or it may have a bad internal SATA cable.  A trip to an Apple store for confirmation would be in order.
    If you have an external disk drive you can use as a backup drive then do so.  If not Google “Hitachi USB 3.0 external hard drive 1TB” to purchase one or go to a brick-and-mortar store (including an Apple store) to pickup one.  Any 1 TB external drive will do.
    Assuming it is still breathing you can try to recover the data without booting from the sick disk. 
    Reformat the external disk.  (This will erase all data on the external disk.)
    Boot in Recovery Mode.  Start Disk Utility.  Plug in the new disk.  Select it’s disk Icon (the second one down, left justified). Select the Partition tab.
    Partition Layout > Single Partition
    Name: Emergency Recovery 1 (or whatever name you wish to use)
    Format: Mac OS Extended (journaled)
    Options… > GUID Partition Table > OK
    Apply
    Select the Restore tab.
    Drag the old system volume (Macintosh HD) to Source.
    Drag the new disk volume (Emergency Recovery 1) to Destination.
    Click on Restore.
    It may take a long time for the backup.
    If that will not complete post back for other emergency data recovery methods, including those from a brody.
    If the backup succeeds, use the First Aid tab in Disk Utility to select the old volume (Macintosh HD) and Repair Disk.  If it does not finish with a green OK message try to repair it once or twice more.  If it repairs with a green OK message, will it boot normally?  If not, boot from the Recovery Partition and reinstall OS X.
    If it is still not healthy, post back for further instructions.

  • Premiere 8.0 Welcome Screen will load the editor, but will not open a project...

    Hi all, this is a small issue but annoying to me... After the welcome screen comes up, I click on "Open Project" and then on a name of my project I would like to work with. After a few seconds, the welcome screen loads the project editor, but the screen stays green, no matter how long I wait, and the projcet I selected does not open. Then I have to go to Files->Open Project and load the project again. Shouldn't the project load automatically if I selected this option from a welcome screeen? I have the 8.0.1 update installed...

    Thanks for you post Steve, you're right. But even if I select a specific project name
    from the Open drop down menu, it still opens a blank screen. Can live with that, but they should fix
    it... The same thing happens when you click on "New Project" in Welcoem Screen: blank screen opens and then you have to go to File -> New project. But if the editor is already open, the problem does not exist, it will do the right thing right away (i.e. open a project or start a new one from the Welcome Screen command)...

  • Anyone else disappointed that Apple or ATT will open the phone in-store

    it kinda ***** for me, it really takes the fun out of it for me

    I'm sure you will be allowed to open the packaging if that is important to you.
    We can thank the hackers and those who took advantage of a good and easy activation process via iTunes at home to violate Apple's license agreement for the iPhone, and not activate the iPhone with at&t - selling it overseas at a profit, etc.

  • Firefox wont load background image on some sites but internet explore will load the background

    i downloaded firefox awhile ago worked perfectly fine then all a sudden it wont load facebook background images the homepage of facebook loads background image but when i log in it wont load background image but when i try internet explorer it loads the background images fine i checked every setting redownloaded everyhing nothing fix's it tho

    If images are missing then check that you aren't blocking images from some domains (e,g, sphotos.ak.fbcdn.net).
    *Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
    *Check that images are enabled: Tools > Options > Content: [X] Load images automatically
    *Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
    *Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
    Make sure that you do not block third-party images, the permissions.default.images pref should be 1.
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
    Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    *http://kb.mozillazine.org/Website_colors_are_wrong
    *http://kb.mozillazine.org/Websites_look_wrong

  • If I connect my device to a new Apple ID, how will it affect my old apps?

    I have an iPod touch with my same old App Store account on it. But I'm having way too much trouble with the account (involving security questions, email addresses etc), but I have purchased way too much stuff on the account to leave it alone.
    So, if I sign out of this account and make a new one and continue my purchases with a new account, what will happen to all my old apps?
    Also, is it true that with my new account, if I need to update my old apps, all I have to do is temporarily sign in from my old account and then sign in again to my new account once the update is done?

    The article saays:
    When you turn on iTunes Match or Automatic Downloads, or when you download past purchases on an iOS device or computer, that device or computer becomes associated with your Apple ID. This article describes how to manage these associations.
    Just refrain from using those features or if you do you will have to wait 90 days to use them with the other account.
    I think when you update an app, iTunes uses the ID that purchased that app/ yu do not have to change the Settings>iTuhes and Ap stores login. However, as I said in my first reply, yu have to update apps one at a time if there are updates available for apps purchased by more than one account.

  • I heard that if you break the glass on you're iphone and you bring it to the apple store, you will replace the glass for free? Is that right?

    Is this true?

    A) Absolutely not true. There will be a replacement cost for an iPhone that is either out of warranty or that does not have Apple Care +. (AppleCare is different, note the + sign).
    If you have Apple Care + on your phone (you will know because it will have had to have been after October 14, purchase date) then you will be eligible for a new phone swap AFTER seeing a Mobile Technician.
    If you have AppleCare +, which now covers accidents, you must make an appointment and you must be seen by an Apple Mobile Ttechnician in order for them to authorize the swap. You cannot walk into a store and have anyone done it - it must be done by a tech.
    Information about AppleCare+ AT TIME OF PURCHASE
    - $99 for two years of coverage
    - Within those two years you are allowed two incidents of accidental damage. They are $49 at the Genius Bar.
    - If a manufacturers defect (something wrong with the device and no damage has occured) is found, the phone is then repaired at no cost, and no incident of $49 will occur.

Maybe you are looking for

  • ALV grid report - Download total to excel

    Hi, In ALV report I am calculating Gross profit%. *Gross profit%  = ( (NetValue- Cost value) * 100 )/ CostValue.* Report strcture is as below. Region     Article             Netvalue      CostValue    Grossprofit%     A       1        100          80

  • Questions about Territory determination in Business transactions in CRM 7.0

    Hi All, We are in the process of configuring territory management in our system. I have a couple of questions regarding Territory determination in Business transactions in CRM 7.0. 1) Territories in business transactinos are determined based on partn

  • Dump when Inserting records in Info type Tables through PA30

    Hi Experts, I am facing a issue in the transaction PA30 where in any changes made and saved leads to Runtime error (Inserting records in Infotype tables ). Error Line : insert (dbname) from  <prel_db> The Structure is the same but the data mismatch w

  • How can you upgrade from OS 10.4

    How can you upgrade from MAC 10.4.4

  • Reader not opening files in IE

    When browsing with internet explorer, PDF files will not open.  get the little "x" in top left of field.  I;ve run the repair program, checked add ons and it is enabled.  Using Mcafee, but I don't see that it is blocking ir, or maybe I just dont know